hathach
eb4380fa14
more make update
2023-06-24 20:17:48 +07:00
hathach
2216704db8
rename GCC_CFLAGS to CFLAGS_GCC, GCC_SRC_S to SRC_S_GCC etc ..
2023-06-24 19:31:33 +07:00
hathach
086c1d4090
more CPU_CORE
2023-06-24 18:54:14 +07:00
hathach
eb7fcf1b74
add CPU_CORE for all family
2023-06-24 18:38:41 +07:00
hathach
b59b65d2ed
rename to kinetis_k32l2, rename OPT_MCU_KINETIS_K32 to OPT_MCU_KINETIS_K32L
2023-06-24 18:26:51 +07:00
hathach
dbf7534cd4
update all stm32 to use new enhance make
2023-06-24 18:09:05 +07:00
hathach
edbf06aaab
separate iar and gcc build for clean make, also add cpu specific make
2023-06-24 17:35:37 +07:00
Andrew Hooper
3a5f43528e
Board support for STM32F407VETx
2023-06-23 11:51:58 -04:00
hathach
c789cfe518
use system_nrf5x.c built-in support for ETM with ENABLE_ETM
2023-06-20 16:13:10 +07:00
hathach
19c99d3b42
etm trace for nrf52840
2023-06-20 13:19:08 +07:00
hathach
1b658ae109
add etm trace for mcb1800
...
clean up other ide setting
2023-06-20 13:12:12 +07:00
hathach
7dc6829519
enable etm trace support for h743 eval
2023-06-19 16:33:47 +07:00
hathach
1419091923
update h7 to cmake, and move iar build to cmake
2023-06-16 16:47:32 +07:00
hathach
e754795d3a
fix build warnings
2023-06-16 15:29:34 +07:00
hathach
a7f330fa94
fix build, update freertos config for cmake
2023-06-16 14:17:25 +07:00
hathach
65d6acdbfa
fix build warnings
2023-06-16 12:02:42 +07:00
hathach
8af8869d3b
renam OPT_MCU_MIMXRT to OPT_MCU_MIMXRT1XXX
...
fix build util with makefile
2023-06-16 11:26:38 +07:00
hathach
d70403f1f4
refactor khci to chipidea fs driver for device (host is not yet)
2023-06-15 13:06:27 +07:00
hathach
bce282186e
update kinetis kl to use mcx-sdk, also add cmake support
...
note: cdc_msc_freertos built but does not seems to work with kl
2023-06-14 22:36:44 +07:00
hathach
31a66eb5bc
mcx neeed helps to locate rtt control block
2023-06-14 15:33:57 +07:00
hathach
8b8b9690ad
update segger rtt to fix cast align
2023-06-14 12:01:21 +07:00
Ha Thach
bbc76e7777
Merge pull request #2104 from hathach/g4-pd
...
Initial support for USB PD stack
2023-06-12 23:14:48 +07:00
hathach
912802456b
move protocol message to stack, disable battery in PWR's CR3
...
there is still issue with CC1/CC2 pull down resistor and vstate is not
correct.
2023-06-09 18:15:28 +07:00
hathach
9c2a8490af
dma rx works well
2023-06-08 13:37:37 +07:00
graham sanderson
0493983a8f
movement of TOP in c0ecf8b5
broke RP2040 SDK build
2023-06-07 14:46:14 -05:00
hathach
b893f1d541
inital support for usb typec and pd example
2023-06-07 15:10:40 +07:00
hathach
914e82b25d
able to receive first PD message
2023-06-07 09:36:37 +07:00
hathach
e02eee7477
revert board flash latency to 8
2023-06-07 00:14:22 +07:00
hathach
b3fda4a354
able to get usbpd irq handler
...
- handle cc1, cc2 voltage changes
- get order set, rx message end interrupt
- add segger rtt support for cmake
2023-06-06 23:55:33 +07:00
hathach
a70978e057
clean up
2023-06-05 19:53:40 +07:00
hathach
f6a45a7aab
clean up
2023-06-05 15:41:45 +07:00
Martino Facchin
cdbd3a0b4e
Merge remote-tracking branch 'mainline/master' into HEAD
...
Update fsp to 4.0.0
2023-06-05 09:12:50 +02:00
hathach
c2bc363f06
build g0 g4 iar cmake
2023-06-02 16:11:00 +07:00
hathach
bb795e6a5e
update cmake to build with IAR for g0 and g4
2023-06-02 15:26:16 +07:00
hathach
fcf7791454
add IAR support for G0 with cmake
2023-06-02 13:27:18 +07:00
hathach
e7090c7514
cmake refactor
2023-06-02 11:42:17 +07:00
hathach
ba3d71b615
fix usb clock for dpow1
2023-06-02 10:19:46 +07:00
hathach
c3bde520cc
add new b_g474e_dpow1 board
2023-06-01 22:16:30 +07:00
hathach
dc3afdbf3b
add note for B0 clock variant
2023-06-01 20:52:48 +07:00
hathach
c750030f7a
add freertosconfig for g0, add cmake stlink, add g0 to cmake ci
2023-06-01 17:09:00 +07:00
hathach
6280cba6e8
tested with g0b1 nucleo
2023-06-01 16:52:58 +07:00
hathach
6b44d8fb55
add cmake support for g0, exlicitly call HAL_Init() and also HAL_IncTick() in systick irq, fix button active state.
2023-06-01 15:58:02 +07:00
hathach
af59864ab5
Merge branch 'master' into feature/STM32G0
2023-06-01 13:28:28 +07:00
hathach
62b2d05d34
skip set CMAKE_EXECUTABLE_SUFFIX for espressif port
2023-06-01 12:50:32 +07:00
hathach
19a597bcae
add lto for cmake
2023-06-01 12:36:08 +07:00
hathach
7ac85d08c7
move lpc18 and rp2040 to cmake workflow since rp2040 often failed randomly with make
2023-05-26 16:37:47 +07:00
hathach
05cc342dfa
update deps, rename kinetis_k32 to k32l
2023-05-26 15:45:55 +07:00
hathach
c0ecf8b50f
move set TOP to family_support.cmake
2023-05-26 14:56:22 +07:00
hathach
4c9605910f
update cmake with freertos
2023-05-25 21:27:26 +07:00
hathach
5fea010406
add family_support_configure_common()
2023-05-25 17:27:05 +07:00
Ha Thach
1ef820ecfe
Enhance chipidea ( #2075 )
...
* update chipidea dcd, remove manual ep_count and use DCCPARAMS to get number of endpoint instead
* add dcd dcache for chipidea
* add cmake for lpc18
* add makefile build for mcx
* use fork of mcu sdk
* fix ci build with nrf
* flash rp2040 with openocd
2023-05-23 21:45:00 +07:00
hathach
9f0bae4c3f
fix freertos build with nrf
2023-05-19 18:04:08 +07:00
hathach
49d8d27770
improve flash target
2023-05-19 16:27:07 +07:00
hathach
270136e84a
adding cpu core .mk for makefile
...
fix cortex m33 for nrf5340 dk
2023-05-19 16:02:26 +07:00
hathach
e8dd200fed
move cmake folder to tools/
2023-05-19 14:46:39 +07:00
hathach
5dae5e1292
ehci fix dcache clean when control endpoint failed
2023-05-19 13:32:49 +07:00
hathach
eb89df4115
adding hcd_dcache_clean/hcd_dcache_invalidate
2023-05-17 16:14:35 +07:00
hathach
1c4f22a54c
EHCI: fix xfer failed with disconnected device as stalled
...
- change CFG_TUH_ENDPOINT_MAX to 16 (max endpoint pair per device) if
not defined
- change QHD_MAX for EHCI, should be user configurable and more
optimized in the future
2023-05-16 11:09:22 +07:00
hathach
116a258858
fix nrf build
2023-05-16 10:14:00 +07:00
hathach
d7175ad834
update nrf cmake and make to support nrf5340 (pca10095)
2023-05-15 23:34:24 +07:00
hathach
9fd0fee458
adding nrf
2023-05-15 14:25:42 +07:00
Ha Thach
a57ba87859
revert family.mk
2023-05-13 13:24:00 +07:00
hathach
dbcef41f95
add support for other lpc55 boards
2023-05-13 13:24:00 +07:00
hathach
2c745d1b1e
able to build lpc55
2023-05-13 13:23:59 +07:00
hathach
8e3bdd2391
add python script to help building cmake, build all imxrt boards with ci
2023-05-10 13:09:15 +07:00
hathach
c0e4c02b9d
allow imxrt build with dual exmaples
2023-05-10 11:15:11 +07:00
hathach
bc579c045e
skip link option --print-memory-usage for renesas rx since it does not support this option
2023-05-09 21:39:10 +07:00
hathach
77f0726361
fix ehci issue with portsc when enable port power and port reset
...
fix attached device not regconized if attached before power on
2023-05-09 17:32:14 +07:00
hathach
04c759028a
simplify cmake target, remove -bsp
2023-05-09 10:02:44 +07:00
hathach
fd50be2e62
change imxrt board_uart_read() to non-blocking
...
simple host seems to work
2023-05-08 19:43:48 +07:00
hathach
4fc4f35a8a
fix linking missing ivt symbol for imxrt with cmake
...
changed device port = 0, host port =1 for imxrt 1060 and 1064
2023-05-08 17:25:47 +07:00
hathach
654f182176
build host examples with imx
2023-05-08 00:24:48 +07:00
hathach
6945c594d5
update all device cmake example for imx
2023-05-07 22:09:08 +07:00
hathach
f15f79df5d
cmake work well with imxrt
2023-05-06 15:14:54 +07:00
hathach
cda5ab8b25
more temp work
2023-05-05 19:15:19 +07:00
hathach
8a9d2b4b75
wip
2023-05-04 23:29:37 +07:00
hathach
629717cd13
fix cmake build
2023-05-04 16:38:06 +07:00
Martino Facchin
a349869906
renesas_ra: fix existing boards support
2023-05-03 10:06:58 +02:00
Martino Facchin
be54870c3b
renesas_ra: add support for HS port
2023-05-03 10:02:24 +02:00
hathach
1a229f3ce2
fix pio vbus typo
2023-04-26 22:36:17 +07:00
hathach
ad39833ea4
fix build with nxp since mcux-sdk from 2.13.0 remove CMSIS folder
2023-04-26 22:10:13 +07:00
hathach
5254202b20
minor update
2023-04-24 11:54:58 +07:00
hathach
11e1aff389
update freeRTOS kernel to latest for library cmake
...
add per family freeRTOSConfig.h also make changes to build with
freertos_kernel cmake
- hard coded configPRIO_BITS based on family
- change configSUPPORT_STATIC_ALLOCATION to 0,
configSUPPORT_DYNAMIC_ALLOCATION to 1
- enable configRECORD_STACK_HIGH_ADDRESS for tracing
- enable INCLUDE_xTaskGetCurrentTaskHandle which is required to compile
stream_buffer (although we don't use it).
2023-04-21 20:55:44 +07:00
hathach
0afe1b3684
example run well with cmake for imxrt
2023-04-21 18:10:28 +07:00
hathach
2ac289685a
clean up
2023-04-20 16:55:48 +07:00
hathach
b42d3e431c
board test running with cmake
2023-04-20 16:43:00 +07:00
hathach
fab48e5bcc
adding cmake build for imxrt1010
2023-04-20 14:09:38 +07:00
HiFiPhile
2f2c8ce9ec
Fix GCC build.
2023-04-14 21:00:55 +02:00
HiFiPhile
71d2ccd78f
Fix CI
2023-04-14 17:29:32 +02:00
HiFiPhile
413b0a7da5
Use PLL clock.
2023-04-14 17:12:47 +02:00
HiFiPhile
0ea23904c4
Add stm32g0b1nucleo BSP.
2023-04-14 16:07:04 +02:00
Ha Thach
5f327dd49f
Merge pull request #2006 from hathach/cmake
...
Cmake
2023-04-06 00:39:39 +07:00
hathach
4f96a1f3b2
more fix
2023-04-03 18:05:22 +07:00
hathach
5ef260d5fc
fix build for esp32
2023-04-03 17:44:05 +07:00
raiden00pl
f2faf72f7f
openh743i: initialize USB3300 reset pin
2023-04-03 12:27:33 +02:00
hathach
cf7aad790c
more esp32 cmake clean up
2023-03-30 11:37:36 +07:00
hathach
641613c428
update all cmake for esp32 build
2023-03-30 10:41:11 +07:00
hathach
96718b7ca0
merge s2 and s3, update cmake for espressif, add tinyusb_src as component
2023-03-30 00:31:26 +07:00
hathach
99315bcca3
adding more cmake support
2023-03-29 14:36:43 +07:00
hathach
71fb6469d4
separate CFG_TUSB_MEM_SECTION and CFG_TUSB_MEM_ALIGN to
...
- CFG_TUD_MEM_SECTION and CFG_TUD_MEM_ALIGN
- CFG_TUH_MEM_SECTION and CFG_TUH_MEM_ALIGN
- fix missing mem section and align for host
2023-03-24 14:05:21 +07:00
hathach
4cee79af27
rename and change default pio usb pin to adafruit feather usb host
2023-03-23 13:08:09 +07:00
hathach
f75a019732
bsp lpc17
2023-03-19 18:10:26 +07:00
hathach
934baae9b8
bsp lpc51
2023-03-19 17:58:20 +07:00
hathach
1154b7a9e7
add mising lpc13 file
2023-03-19 17:40:44 +07:00
hathach
64c6b715ce
bsp lpc13
2023-03-19 17:27:45 +07:00
hathach
80be1aa13d
bsp lpc11
2023-03-19 17:19:33 +07:00
hathach
aa11e21358
add mising file
2023-03-19 13:15:05 +07:00
hathach
b46632ba07
bsp for f2 f3
2023-03-19 13:11:41 +07:00
hathach
322f58ea85
add CFLAGS_SKIP to improve sam compile time
2023-03-19 12:47:05 +07:00
hathach
ab0da3c30b
group stm32l0
2023-03-19 12:01:33 +07:00
hathach
3944f1c4da
group same5x
2023-03-19 11:28:06 +07:00
hathach
ec0f25d095
fix ci with kl25z
2023-03-18 20:30:49 +07:00
hathach
1fc203b085
more update to kinetis bsp
2023-03-18 19:50:24 +07:00
hathach
2d187777c0
merge kinetis into its own family in bsp
2023-03-18 18:30:51 +07:00
Bob Paddock
f9b8a0667a
Add support for NXP FRDM_K32L2A4S eval board.
2023-03-18 16:50:50 +07:00
hathach
1ed04ad05d
update mm32sdk with idndef for SYSCLK_FREQ_XXMHz and SYSCLK_HSI_XXMHz
...
add HSE_VALUE define for each board with 8mhz, 12mhz accordingly
2023-03-17 19:46:22 +07:00
hathach
b3ecf82196
whitespace
2023-03-17 19:31:45 +07:00
Koen De Vleeschauwer
899e7cc4f9
add board: DshanMCU Pitaya Lite
2023-03-17 19:31:06 +07:00
hathach
3623ba1884
fix trailing space and new line
...
temporarily disable codespell
2023-03-17 16:12:49 +07:00
Ha Thach
16daad8164
Merge pull request #1960 from hathach/fix-host-enumerate-mul-device
...
Fix host enumerate multiple devices from multiple host controllers
2023-03-17 15:27:56 +07:00
Ha Thach
96d064e923
Merge pull request #1860 from howard0su/pico_freertos
...
Allow config OS for RP2040
2023-03-17 14:57:13 +07:00
hathach
317177c83d
update host example, add pio-pico-usb for rp2040
2023-03-17 14:06:25 +07:00
Ha Thach
6b84a29f8c
Merge pull request #1391 from perigoso/renesas-ra
...
Renesas ra family support
2023-03-17 11:28:54 +07:00
hathach
e7d212f337
more fix
2023-03-16 23:21:15 +07:00
hathach
ffdffc7e06
rename FREERTOS_PORT to FREERTOS_PORTABLE_SRC
...
also fix trailing spaces
2023-03-16 23:11:11 +07:00
hathach
e0b1de923c
add ra4m1_ek board
2023-03-16 22:43:58 +07:00
hathach
2a10d5c20b
rename ra board name
2023-03-16 11:39:53 +07:00
hathach
bc2127b330
rename file link to rusb2
2023-03-16 11:03:53 +07:00
tyustli
fabe86362b
fix HAL_Delay no effect bug on st platform
2023-03-16 08:28:19 +08:00
hathach
7428a16d2d
remove ra submodules
2023-03-11 08:23:21 +07:00
hathach
fe77976765
Merge branch 'master' into renesas-ra
2023-03-11 08:15:23 +07:00
hathach
206a9a21e6
fix ci
2023-03-10 23:54:30 +07:00
Ha Thach
990fb6ae5c
Merge pull request #1931 from branalba/master
...
For STM32H7 BSP boards, initialize RCC_...TypeDef structs as empty
2023-03-09 17:21:58 +07:00
hathach
05e0205ad0
Merge branch 'master' into renesas-ra
2023-03-08 21:05:06 +07:00
Ha Thach
3387c86108
Merge pull request #1933 from kilograham/rp2040_llvm_tweaks
...
make rp2040 code compile cleanly with LLVM embedded toochain for ARM.
2023-03-06 15:24:51 +07:00
hathach
02478c57e5
more ci fix
2023-03-06 14:31:18 +07:00
hathach
9930863b41
fix iar ci
2023-03-06 12:45:47 +07:00
hathach
5c537c25f0
change gcc to 10.3 due to freeRTOS warning
2023-03-06 11:16:21 +07:00
hathach
7089535848
clean up f0 warnings
2023-03-03 16:13:12 +07:00
graham sanderson
b7fa90e706
rp2040: Fixup lib and example compile for LLVM Embedded Toolchain for ARM
2023-03-02 14:32:22 -06:00
Brandon Alba
8c8f26f14e
In some STM32H7 BSP variants, initialized RCC_PeriphCLKInitStruct instances as empty
2023-02-28 10:31:07 -08:00
Brandon Alba
787afbbcd0
Initialized all RCC init structs for all STM32H7 BSP variants as empty
2023-02-28 10:25:06 -08:00
Ha Thach
b66c2d5f0a
Merge pull request #1796 from Sinitax/master
...
Fix ifdefs for disabled uart stdio in rp2040 family
2023-02-22 17:40:54 +07:00
hathach
c01aee6c1a
revert some changes
2023-02-22 15:14:56 +07:00
hathach
78a014ef18
move check LIB_PICO_STDIO_UART to board.h
2023-02-22 15:13:27 +07:00
hathach
fbf99b8e53
forget to add metro 1011 linker
2023-02-13 13:33:03 +07:00
hathach
fb5fd22c73
add uf2 linker for metro m7 1011
2023-02-13 12:29:31 +07:00
hathach
49c621d510
fix typo
2023-02-13 12:04:33 +07:00
hathach
105f108661
add metro m7 1011 board def (not running yet)
2023-02-13 12:03:09 +07:00
caleb crome
ec26c6163c
Turn data cache on
...
This fixes https://github.com/hathach/tinyusb/issues/1894 . I'm not really
sure if this is the correct way to fix it, and I have not tested on all the
rest of the family members, however, this lets the i.MX1010 work again.
The problem: the latest SDK update does not enable the data cache by default
This causes an assert in board_init() when attemping to control clock
gating. I haven't investigated further as to *why* it's a problem, but it
is a problem.
2023-02-12 11:24:21 -08:00
graham sanderson
8d3f0ffb95
* don't force dependency on pico-pio-usb submodule
...
* suppress compiler warning/errors especially in pico-pio-usb
* disable use of pico-pio-usb on gcc 11.3+ for now as it doesn't compile
2023-02-06 10:07:39 -06:00
Ha Thach
49628d8c18
Merge pull request #1779 from P33M/rp2040_device_babble_fix
...
rp2040: avoid device-mode state machine hang
2023-01-31 21:38:27 +07:00
Ha Thach
b03a688b24
Merge pull request #1768 from ftdigdm/port-ft90x
...
Port ft90x
2023-01-30 22:13:14 +07:00
hathach
25603c7269
iar L4
2023-01-30 20:11:59 +07:00
hathach
63a6fd3689
iar g4
2023-01-30 17:07:06 +07:00
Gordon McNab
c07fb9a71e
Merge branch 'port-ft90x' of https://github.com/ftdigdm/tinyusb into port-ft90x
2023-01-30 10:06:55 +00:00
hathach
b464f91a6e
iar h7
2023-01-30 17:04:39 +07:00
Gordon McNab
63e6aea5ac
Removed unrequired header file from debugging.
2023-01-30 10:04:34 +00:00
hathach
6257123157
Merge branch 'master' into support-iar
2023-01-30 16:44:22 +07:00
Ha Thach
88f3279c3c
Merge branch 'master' into port-ft90x
2023-01-30 11:40:53 +07:00
Ha Thach
00c007ed68
Merge pull request #1866 from DRNadler/mimxrt1024_evk
...
Add support for NXP's mimxrt1024_evk evaluation board.
2023-01-30 11:18:10 +07:00
hathach
11384159e1
suppress rt1024 warnings and fix typo
2023-01-30 10:16:57 +07:00
Jerzy Kasenberg
42230df71a
Add support for nucleo-h723zg
...
Mostly copy of stm32h743nucleo.
Linker script generated by STM32CubeIDE.
Since this device has only one HS USB
board.h contains few defines that map on
board HS USB to FS because there is no
ULPI chip mounted on Nucleo board.
For FreeRTOS build:
Set interrupt priority for HS always and for FS if exists.
2023-01-26 12:53:03 +01:00
Jerzy Kasenberg
ba017d0669
boards/stm32h7 update gpio clocks
...
GPIOE was turned on twice, changed to missing GPIOF.
GPIOI is not present on all boards notably STM32H723
so clock in turned on only if present.
2023-01-26 12:02:07 +01:00
Jonathan Bell
73b0047efc
rp2040: avoid device-mode state machine hang
...
Don't mark IN buffers as available during the last 200us of a full-speed
frame. This avoids a situation seen with the USB2.0 hub on a Raspberry
Pi 4 where a late IN token before the next full-speed SOF can cause port
babble and a corrupt ACK packet. The nature of the data corruption has a
chance to cause device lockup.
Use the next SOF to mark delayed buffers as available. This reduces
available Bulk IN bandwidth by approximately 20%, and requires that the
SOF interrupt is enabled while these transfers are ongoing.
Inherit the top-level enable from the corresponding Pico-SDK flag.
Applications that will not use the device in a situation where it could
be plugged into a Pi 4 or Pi 400 (for example, when directly connected
to a commodity hub or other host) can turn off the flag in the SDK.
v2: use a field in hw_endpoint to mark pending.
v3: Partial rewrite following review comments
- Stub functions out if the workaround is not required
- Only force-enable SOF while any vulnerable endpoints are active
- Respect dcd_sof_enable() functionality
- Get rid of all but necessary ifdef hackery
- Fix a bug where the "endpoint lock" was used with an uninitialised pointer.
2023-01-24 11:53:28 +00:00
hathach
df2ebe5d1a
add iar --fpu option
2023-01-24 12:57:07 +07:00
hathach
0a4e611e37
update stm32f7 to build with iar
2023-01-22 12:11:01 +07:00
hathach
db36075721
update f4 to build with iar
2023-01-22 11:56:50 +07:00
hathach
436cd5b9b8
add icf for f1 mini2
2023-01-21 14:26:46 +07:00
hathach
1bbeb6ad79
update stm32f1 to support iar build
2023-01-21 11:32:37 +07:00
Dave Nadler
a6e0b598fa
Add support for NXP's mimxrt1024_evk evaluation board.
...
Tested AOK with device\cdc_msc_freertos example.
2023-01-20 13:15:42 -05:00
Dave Nadler
456a8b208b
Add support for NXP's mimxrt1024_evk evaluation board.
...
Tested AOK with device\cdc_msc_freertos example.
2023-01-20 12:59:45 -05:00
hathach
3fd075b48b
fix warning
2023-01-20 15:29:23 +07:00
hathach
ecfd57e6f1
get most examples build with iar
2023-01-18 10:31:00 +07:00
Howard Su
eb7aacb51f
Allow config OS for RP2040
2023-01-18 02:30:05 +00:00
hathach
8df2fd1916
update freertos example to build with iar
2023-01-17 23:38:10 +07:00
hathach
1891802f08
update all f0 board to build with iar
2023-01-17 16:38:02 +07:00
hathach
3fee8b402e
update makefile to support iar build starting with stm32f070
2023-01-17 16:20:04 +07:00
hathach
160d64b00a
minor clean up. ch32v307 has issue with uart LOG=2 (skipping characters)
2023-01-12 15:34:29 +07:00
hathach
f05f81e8b3
add button support
2023-01-12 15:19:26 +07:00
hathach
65f7a8006c
rename board to lower case ch32v307v-r1-1v0
2023-01-12 13:31:36 +07:00
hathach
e6a3cfb350
rename link file
2023-01-12 13:12:37 +07:00
hathach
658897cf4e
fix redundant-decls warnings with USART_Printf_Init()
2023-01-12 12:30:18 +07:00
hathach
e61d4aefe6
rename driver with dcd_ to be consitent with other ports
2023-01-12 12:08:56 +07:00
hathach
3cc6cece07
add note for openocd with wch, also add wch-riscv.cfg
2023-01-12 10:25:48 +07:00
hathach
a7e1de1e83
temporarily suppress redundant-decls due to USART_Printf_Init()
...
fix codespell
2023-01-08 00:02:25 +07:00
Ha Thach
949950e592
Merge branch 'master' into ch32v307
2023-01-07 23:46:46 +07:00
Louis Burda
9e7e8908a3
Fix ifdefs for disabled uart stdio in rp2040 family
2022-12-13 11:00:03 +01:00
hathach
43b255f413
more typos
2022-12-04 19:44:01 +07:00
Bastien Nocera
6a2cf67289
Fix typos
2022-12-04 19:43:23 +07:00
Gordon McNab
8cce9385e2
More configurable board options
2022-11-30 16:18:07 +00:00
Gordon McNab
d3c4f66d35
Fix script issues with paths including spaces from env variable.
...
$(FT90X_TOOLCHAIN) or even $(TOP) may have spaces. Quote to fix.
2022-11-30 12:49:15 +00:00
Gordon McNab
aceab1dcf3
Merge branch 'hathach:master' into port-ft90x
2022-11-30 12:16:52 +00:00
Gordon McNab
fe63e30a44
Add FT9xx for cdc_dual_ports
...
Fix handling of interrupt endpoints. i.e. no ZLPs.
Fix the assignation of endpoint types.
Add button support for MM900evx boards.
On board support do not block for UART input.
2022-11-30 11:46:13 +00:00
Gordon McNab
7d8d3eca73
Fix transfers issues with FT9xx
...
Correct USB FIFO use for setup data phases (OUT transfers). We cannot stop traffic on the control endpoint so we set a flag and pull data from host when tinyUSB requests it from the USB FIFO. Extend this for all endpoints although currently not required.
Rename all instances of ft90x which can apply to ft93x as ft9xx.
Add support for the cdc_dual_ports example for ft9xx.
Add LED pin definition for board LED in a simple to access place on the Bridgetek MM900EVx boards.
2022-11-29 18:49:23 +00:00
Gordon McNab
1fce76ad47
Fix issue with the CDC SetLineCoding request
...
The SetLineCoding would fail as host would send the SETUP OUT phase before tinyUSB had setup a transaction for it. ft9xx port would ignore the transfer since there was no valid transaction setup for it. One SETUP data phase packet is cached now.
2022-11-28 17:41:00 +00:00
Adrian Scripca
8ef32617ba
Added board description for electro-smith daisy seed
2022-11-24 13:06:25 +02:00
hathach
a394273ed2
add board_getchar() for non-blocking getchar()
2022-11-21 16:28:54 +07:00
hathach
460bef9dbb
host msc example work well with rp2040 pio-usb
2022-11-21 15:49:38 +07:00
hathach
a6001fc8f2
update uart read for lpc18/43 for testing
2022-11-18 21:50:00 +07:00
Mengsk
da1589f116
Fix FREERTOS USB IRQ priority.
2022-11-08 21:58:51 +01:00
Mengsk
f3f3739073
Fix DCD build.
2022-11-07 13:38:35 +01:00
Mengsk
9d3d8fd5b0
Merge branch 'master' of https://github.com/hathach/tinyusb into bsp_412
2022-11-07 12:47:41 +01:00
Mengsk
1eae139aa9
Add support for STM32L412.
2022-11-07 12:32:36 +01:00
Ha Thach
e434a1dc05
Merge pull request #1718 from hfegran/efm32_freertos_port_fix
...
Fixed wrong FreeRTOS port for EFM32GG12
2022-11-07 00:05:51 +07:00
hathach
44e19aa3c7
rename PIO_USB_PIN_DP to PIO_USB_DP_PIN and change from 2 to 20 & moved to board.h
...
add support for PIO_USB_VBUSEN_PIN and its state.
2022-11-06 14:44:56 +07:00
hathach
cb0ca6151b
remove CFG_TUSB_DEBUG from tinyusb_common_base
2022-11-04 17:08:02 +07:00
Henrik Fegran
38cdeb9e60
Fixed wrong FreeRTOS port for EFM32GG12
2022-11-03 20:23:27 +01:00
Ha Thach
5b1b383d2a
Merge pull request #1676 from tswan-quasi/master
...
dcd_lpc_ip3511: isochronous support and endpoint accidental write fix
2022-10-24 19:08:58 +07:00
hathach
e3b7ed9ae9
use dummy for all ZLP for ip3511, fix lpc55 build with DEBUG=1
2022-10-24 18:43:21 +07:00
LynnL4
4238467b2d
Add support for STM32U5 mcu
2022-10-13 17:39:42 +08:00
Peter Lawrence
d1c61e33a6
add 'stm32l052dap52' (STM32L052K8 MCU) board target
...
'dap52' is Olimex's name of their STM32L052-based fork of 'dap42'
2022-08-03 12:31:37 -05:00
graham sanderson
4bd47bcb99
disable bad gcc 6 warning
2022-07-12 13:29:47 -05:00
graham sanderson
fc1a27b6c9
RP@040: rework CMake for compiler warnings
2022-07-12 12:58:30 -05:00
Ha Thach
0bfb9d62de
Merge pull request #1543 from robert-hh/1170_0.13.0
...
mimxrt: Change the definitions for MIMXRT boards.
2022-07-11 15:53:24 +07:00
hathach
6da1e93edd
fix rt1050 evk build with latest mcu-sdk
2022-07-11 14:21:19 +07:00
Ha Thach
ecb899408b
Merge pull request #1544 from hathach/ci-parallel-build
...
Ci parallel build
2022-07-01 20:52:46 +07:00
hathach
53db23142a
add get-dependencies.py
2022-07-01 17:23:14 +07:00
robert-hh
ec6f56768a
mimxrt: Change OPT_MCU_MIMXRT1xXX to OPT_MCU_MIMXRT.
...
Which fits both MIMXRT10XX and MIMXRT11XX.
2022-07-01 09:04:36 +02:00
robert-hh
60c1750a9b
mimxrt: Add/change definitions for MIMXRT11XX boards.
...
These are mostly identical to the MIMXRT10XX, with one tiny difference.
2022-06-30 22:21:31 +02:00
Pawel Hryniszak
023191be23
Let to define CFG_BOARD_UART_BAUDRATE in CMake
2022-06-29 20:28:22 +01:00
Ha Thach
19956f070d
Merge pull request #1539 from hathach/improve-ci
...
Improve ci
2022-06-29 16:27:17 +07:00
hathach
158b3d761d
fix xmc4000 build
2022-06-29 15:27:24 +07:00
hathach
5a378703fb
fix end symbol for samx7x and same5x
2022-06-29 15:05:09 +07:00
hathach
a62c2640b5
remove redundant rp2040 boards, all boards supported by pico-sdk already supported
2022-06-29 14:08:01 +07:00
hathach
8fe9022a6e
fix buid_board.py script
2022-06-29 14:06:44 +07:00
hathach
898b52be45
update rp2040 warnings
...
- remove "-Wno-stringop-overflow -Wno-array-bounds"
- skip -Wconversion for gcc 9 and prior
- suppress_tinyusb_warnings only when building with gcc 9 and below
2022-06-28 16:27:44 +07:00
hathach
83602ea123
Merge branch 'master' into rp2040_warning
2022-06-28 13:34:47 +07:00
graham sanderson
4057c2d8d9
rework suppress_tinyusb_warnings
...
* gcc 9.2.1 has some spurious -Wconversion warnings
* cmake 3.18 and above require set_target_properties to be added from the target directory (so added it to all examples)
* fixed a few warnings in a couple of examples
2022-06-27 22:43:41 +01:00
hathach
b9dc9dbd78
fix most warnings with rp2040 -wconversion
2022-06-27 11:50:17 +07:00
hathach
0042eccb3b
fix redundant-decls warnings by usbd/usbh
2022-06-24 22:52:11 +07:00
hathach
1d6918ce41
suppress redundant-decls warnings for freertos examples
2022-06-24 21:53:46 +07:00
hathach
835ab01cab
fix stm32 g4 and wb build issue with freertos, also add them to ci build
2022-06-24 21:52:51 +07:00
hathach
4f6e770eda
add more warning option, also fix -Wconversion with rp2040
...
-Wuninitialized, -Wunused, -Wredundant-decls
2022-06-24 19:46:19 +07:00
Ha Thach
4639cac85c
Merge pull request #1526 from ccrome/chc-add-teensy-41
...
Added The Teensy 4.1 board
2022-06-22 11:22:44 +07:00
caleb crome
742b99f689
Added The Teensy 4.1 board
...
The Teensy 4.1 board has an 8MB W25Q64JV as opposed to the 2MB flash
on the Teensy 4.0. This largely doensn't matter for TinyUsb, except
when you attempt to access any memory in the flash above the 2MB
boundary, when it fails with a hard fault.
2022-06-21 11:12:39 -07:00
graham sanderson
2f7f3e604e
Re-add some warning suppression for rp2040
2022-06-17 12:54:28 -05:00
hathach
8cbc34de11
add tuh_configure() for port/dynamic host behavior config
2022-06-08 01:17:01 +07:00
hathach
1b08672945
more ci fix
2022-06-06 13:25:48 +07:00
hathach
7187cd9a85
fix ci, remove use of CFG_TUSB_RHPORT0_MODE in bsp
2022-06-06 12:51:10 +07:00
hathach
2571211957
remove static port defined for device/host
2022-06-03 11:32:09 +07:00
hathach
8b9cf152a0
rhport argument in usbd_ API() is not used (always use the initialized port)
...
remove the usage of TUD_OPT_RHPORT in class driver
2022-06-02 16:51:17 +07:00
Rafael Silva
60aae59eeb
style code for consistency with existing codebase
2022-06-02 09:35:30 +01:00
Rafael Silva
e0220c6594
fix int handling for host in ek_ra4m3 port
2022-06-02 09:35:30 +01:00
Rafael Silva
4c89776a27
add renesas ek-ra4m3 board port
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
Rafael Silva
2a17a7e8f8
rework make freertos port handling
...
this allows ports to specify a freertos port outside the FreeRTOS-Kernel lib directory, which would otherwise not be possible
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
Rafael Silva
03777f4a46
generalize renesas LINK core driver
...
create local register access struct and move mcu specific code
in preparation of support for other mcu families that use the LINK usb core
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
Rafael Silva
dcadbf3364
rename renesas driver to link
...
link was chosen according to the name for the usb core on datasheets, LINK core
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
hathach
99c1585ed2
rename board specific macro for example
...
- BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT
- BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
2022-06-01 23:53:40 +07:00
Ha Thach
2683deb0dd
Merge branch 'master' into ch32v307
2022-05-21 13:54:25 +07:00
graham sanderson
26c4d4b328
Minor cleanup of RP2040 code post addition of Pico-PIO_USB
...
* Removed some compiler warnings, and cleaned out unnecessary warning suppression from CMake suppress_tinyusb_warnings()
* Made explicit family_configure_dual_usb_example() for DUAL mode examples as family_configure_target() may not generally be called multiple times for the same target
* Renamed library pico_pio_usb to tinyusb_picio_pio_usb to be clearer and avoid conflict if someone already has a pico_pio_usb in their project
* Added family_add_pico_pio_usb() method for adding Pico-PIO_SUB support to an existing example
* Allowed tinyusb_pico_pio_usb to be added to regular apps using the Pico SDK
2022-05-20 17:25:30 -05:00
Ha Thach
c2bcda86e2
Merge pull request #1412 from hathach/pio-host
...
PIO USB support
2022-05-16 16:29:20 +07:00
hathach
4586d8f119
add upstream Pico-PIO-USB
2022-05-16 13:44:06 +07:00
hathach
35b77a4a81
cmake lib rename
2022-05-10 22:14:00 +07:00
hathach
717a474125
move pio-usb init to family_configure_pio_usb_example() to stay compatible
2022-05-10 21:56:47 +07:00
hathach
26ee622222
move pio usb files to src
2022-05-10 12:51:48 +07:00
caleb crome
f19d913b5d
set irq priority for freertos
2022-05-05 22:29:12 -07:00
hathach
0b30a10ab3
configure hid_to_cdc example to build with rp2040 with pio usb as host
2022-04-29 22:24:36 +07:00
hathach
4a661dead0
add TU_ATTR_FAST_FUNC for rp2040 __not_in_flash() section
2022-04-27 17:57:52 +07:00
hathach
12debd7763
keep up with pio usb
2022-04-22 01:06:17 +07:00
hathach
cc5a4720e5
catch up with pio lib
2022-04-14 22:00:47 +07:00
hathach
d5d4909c20
proof of concpet that device pio-usb work with host pio-usb
2022-04-08 13:36:05 +07:00
hathach
c25f835aea
update to use pio hw endpoint
2022-04-01 23:31:43 +07:00
hathach
db6cba6a7b
rename pio to pio_usb
2022-04-01 16:38:41 +07:00
hathach
e2f0aef93b
make use pio_usb_port_reset_start/end
2022-03-30 16:41:55 +07:00
Greg Davill
a09c1648f5
Fix typo
2022-03-22 23:31:20 +10:30
Greg Davill
1d254be1a4
Increase stack size to 4096 bytes
2022-03-22 16:03:53 +10:30
Greg Davill
fccbcfc889
Add WCH CH32V307 port
...
Add WCH mcu submodule
Add CH32V307V-R1-1v0 bsp
2022-03-22 00:30:46 +10:30
hathach
45052c625e
Merge branch 'master' into pio-host
2022-03-20 00:51:00 +07:00
hathach
a715077b10
remove usbh_control.c
2022-03-11 09:57:35 +07:00
Jerzy Kasenberg
76c8d4d95b
Add support for nucleo-wb55rg
2022-03-07 09:35:12 +01:00
hathach
1d29817139
start to add pio usb (host) support
...
run as proof of concept
2022-03-01 23:55:53 +07:00
hathach
31aa077cb0
rename TUSB_OPT_HOST_ENABLED to CFG_TUH_ENABLED
2022-02-25 18:35:21 +07:00
hathach
d10326cb4e
rename TUSB_OPT_DEVICE_ENABLED to CFG_TUD_ENABLED
...
TUSB_OPT_DEVICE_ENABLED still usable for backward compatible
2022-02-25 18:35:21 +07:00
hathach
a8d6e82395
enhance dual role examples
2022-02-25 17:36:05 +07:00
Scott Shawcroft
9ba1ba8fa1
Guard clock setup for USB2
2022-02-22 18:39:02 -08:00
Scott Shawcroft
d749597591
Add dual role (concurrent) example
...
This reads HID devices over host and then translates that to ASCII
and sends it over CDC device.
2022-02-22 18:13:22 -08:00
hathach
e188117823
more esp build fix
2022-02-18 16:30:21 +07:00
hathach
52645fcc1b
fix build with latest esp idf
2022-02-18 13:07:21 +07:00
Jay Beavers
2df57d2be0
Nit spelling correction
2022-02-09 08:19:01 -08:00
kkitayam
d7cbfaaa0a
Add hcd into source list
2022-01-27 22:26:51 +09:00
kkitayam
a4bc6075ce
Add HCD functions for KL25Z
2022-01-27 20:57:40 +09:00
Ha Thach
7de166390e
Merge branch 'master' into master
2022-01-25 22:29:05 +07:00
Ha Thach
e40547ada1
Merge pull request #1265 from kkitayam/add_hcd_for_renesas_rx
...
Add HCD driver for Renesas RX
2022-01-19 19:07:21 +07:00
Ha Thach
84f2ca77f7
Merge pull request #1283 from kasjer/kasjer/olimex-pic32-board-fixes
...
olimex pic32 board fixes
2022-01-19 09:55:18 +07:00
Jerzy Kasenberg
45d56915d1
pic32/olimex boards: Fix active state of button
...
Buttons for olimex_emz64 and olimex_hmz144 should be set
to active low in board configuration.
2022-01-17 18:00:58 +01:00
Ha Thach
58b8bdc2e4
Merge pull request #1277 from liamfraser/fix-cmake-skip
...
Fix family_support.cmake to use new skip.txt and only.txt files
2022-01-17 14:36:51 +07:00
Ha Thach
efc29baead
Merge branch 'master' into port-ft90x
2022-01-17 12:36:39 +07:00
Ha Thach
976405dea3
Merge pull request #1270 from kasjer/kasjer/pic32mz
...
Driver for Microchip PIC32MZ family
2022-01-16 20:24:14 +07:00
hathach
cb57f047e7
update for s3
2022-01-16 13:26:50 +07:00
hathach
e1e4577616
more ci fix
2022-01-16 13:24:36 +07:00
hathach
e635c16de0
fix esp ci build with IDF version 5
2022-01-16 13:12:27 +07:00
Liam Fraser
3db9cf3547
Fix family_support.cmake to use new skip.txt and only.txt files for skipping mcus
2022-01-13 16:39:55 +00:00
Jerzy Kasenberg
fff4a248be
Add BSPs for Microchip PIC32MZ MCUs
...
Two boards from Olimex are added:
olimex_hmz144 with PIC32MZ2048EFM144
olimex_emz64.c with PIC32MZ2048EFH064
Both can be programmed with Segger JLINK probe using ICSP
interface. (JTAG not tested but could also work but header
is not mounted).
2022-01-07 14:12:42 +01:00
Scott Shawcroft
47218eeb67
No exceptions on broadcom. Add parens to if
2022-01-05 16:07:17 -08:00
Scott Shawcroft
7b27b8f498
Unify skip and only logic for build scripts
...
And switch to a single file that can include mcu, family or board.
2022-01-05 15:44:23 -08:00
Scott Shawcroft
4fe0a30ec7
Skip net and freertos examples
2022-01-05 14:33:24 -08:00
Scott Shawcroft
84e2df51be
Split by compiler for testing
2022-01-05 14:11:39 -08:00
Scott Shawcroft
a79ffeb764
Add Raspberry Pi Zero W and Zero 2 W
...
These are different Broadcom chips. The peripherals are essentially
the same. The main differences are:
* The CPU(s)
* The interrupt controller
* The peripheral base address (but not the peripherals that we use)
2022-01-05 13:47:01 -08:00
hathach
5f280b3029
add license to dcd file, slightly update readme
2021-12-29 19:25:32 +07:00