Add stm32g0b1nucleo BSP.
This commit is contained in:
HiFiPhile
parent
152a22f3ee
commit
0ea23904c4
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
******************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Author : STM32CubeMX
|
||||
**
|
||||
** Abstract : Linker script for STM32G0B1RETx series
|
||||
** 512Kbytes FLASH and 144Kbytes RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
** Distribution: The file is distributed “as is,” without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 144K
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,116 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||
* Copyright (c) 2034, HiFiPhile
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// G0B1RE Nucleo does not has usb connection. We need to manually connect
|
||||
// - PA12 for D+, CN10.12
|
||||
// - PA11 for D-, CN10.14
|
||||
|
||||
// LED
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_5
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// Button
|
||||
#define BUTTON_PORT GPIOC
|
||||
#define BUTTON_PIN GPIO_PIN_13
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
// UART Enable for STLink VCOM
|
||||
#define UART_DEV USART2
|
||||
#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE
|
||||
#define UART_GPIO_PORT GPIOA
|
||||
#define UART_GPIO_AF GPIO_AF1_USART2
|
||||
#define UART_TX_PIN GPIO_PIN_2
|
||||
#define UART_RX_PIN GPIO_PIN_3
|
||||
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// RCC Clock
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void board_clock_init(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_CRSInitTypeDef pInit = {0};
|
||||
|
||||
/** Tick priority is used in HAL_RCC_OscConfig, so we need to enable it now
|
||||
*/
|
||||
HAL_InitTick(0);
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSI48;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
|
||||
|
||||
/** Enable the SYSCFG APB clock
|
||||
*/
|
||||
__HAL_RCC_CRS_CLK_ENABLE();
|
||||
|
||||
/** Configures CRS
|
||||
*/
|
||||
pInit.Prescaler = RCC_CRS_SYNC_DIV1;
|
||||
pInit.Source = RCC_CRS_SYNC_SOURCE_USB;
|
||||
pInit.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
|
||||
pInit.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000);
|
||||
pInit.ErrorLimitValue = 34;
|
||||
pInit.HSI48CalibrationValue = 32;
|
||||
|
||||
HAL_RCCEx_CRSConfig(&pInit);
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
CFLAGS += \
|
||||
-DSTM32G0B1xx
|
||||
|
||||
# GCC
|
||||
GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32g0b1xx.s
|
||||
GCC_LD_FILE = $(BOARD_PATH)/STM32G0B1RETx_FLASH.ld
|
||||
|
||||
# IAR
|
||||
IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32g0b1xx.s
|
||||
IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32g0b1xx_flash.icf
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32g0b1re
|
||||
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
* Copyright (c) 2023 HiFiPhile
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "stm32g0xx_hal.h"
|
||||
#include "bsp/board.h"
|
||||
#include "board.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
void USB_UCPD1_2_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO TYPEDEF CONSTANT ENUM
|
||||
//--------------------------------------------------------------------+
|
||||
UART_HandleTypeDef UartHandle;
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
board_clock_init();
|
||||
|
||||
// Enable All GPIOs clocks
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
|
||||
UART_CLK_EN();
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// Explicitly disable systick to prevent its ISR runs before scheduler start
|
||||
SysTick->CTRL &= ~1U;
|
||||
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
NVIC_SetPriority(USB_UCPD1_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
||||
#endif
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
// LED
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
board_led_write(false);
|
||||
|
||||
// Button
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
#ifdef UART_DEV
|
||||
// UART
|
||||
GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = UART_GPIO_AF;
|
||||
HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
|
||||
|
||||
UartHandle = (UART_HandleTypeDef){
|
||||
.Instance = UART_DEV,
|
||||
.Init.BaudRate = CFG_BOARD_UART_BAUDRATE,
|
||||
.Init.WordLength = UART_WORDLENGTH_8B,
|
||||
.Init.StopBits = UART_STOPBITS_1,
|
||||
.Init.Parity = UART_PARITY_NONE,
|
||||
.Init.HwFlowCtl = UART_HWCONTROL_NONE,
|
||||
.Init.Mode = UART_MODE_TX_RX,
|
||||
.Init.OverSampling = UART_OVERSAMPLING_16,
|
||||
.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT
|
||||
};
|
||||
HAL_UART_Init(&UartHandle);
|
||||
#endif
|
||||
|
||||
// USB Pins TODO double check USB clock and pin setup
|
||||
// Configure USB DM and DP pins. This is optional, and maintained only for user guidance.
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
|
||||
/* Enable VDDUSB */
|
||||
if(__HAL_RCC_PWR_IS_CLK_DISABLED())
|
||||
{
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
HAL_PWREx_EnableVddUSB();
|
||||
__HAL_RCC_PWR_CLK_DISABLE();
|
||||
}
|
||||
else
|
||||
{
|
||||
HAL_PWREx_EnableVddUSB();
|
||||
}
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
#ifdef UART_DEV
|
||||
HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff);
|
||||
return len;
|
||||
#else
|
||||
(void) buf; (void) len; (void) UartHandle;
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
__asm("BKPT #0\n");
|
||||
}
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
ST_FAMILY = g0
|
||||
DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
|
||||
|
||||
ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
|
||||
ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
|
||||
|
||||
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||
|
||||
# --------------
|
||||
# Compiler Flags
|
||||
# --------------
|
||||
CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32G0
|
||||
|
||||
# GCC Flags
|
||||
GCC_CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m0plus \
|
||||
-mfloat-abi=soft \
|
||||
-nostdlib -nostartfiles
|
||||
|
||||
# suppress warning caused by vendor mcu driver
|
||||
GCC_CFLAGS += -Wno-error=cast-align
|
||||
|
||||
# IAR Flags
|
||||
IAR_CFLAGS += --cpu cortex-m0
|
||||
IAR_ASFLAGS += --cpu cortex-m0
|
||||
|
||||
# -----------------
|
||||
# Sources & Include
|
||||
# -----------------
|
||||
|
||||
SRC_C += \
|
||||
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
|
||||
|
||||
INC += \
|
||||
$(TOP)/$(BOARD_PATH) \
|
||||
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM0
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: flash-stlink
|
||||
|
|
@ -0,0 +1,351 @@
|
|||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32g0xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32G0xx_HAL_CONF_H
|
||||
#define STM32G0xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_COMP_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
/* #define HAL_FDCAN_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
|
||||
/* ########################## Register Callbacks selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules where register callback can be used
|
||||
*/
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE (8000000UL) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
|
||||
* This internal oscillator is mainly dedicated to provide a high precision clock to
|
||||
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
|
||||
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
|
||||
* which is subject to manufacturing process variations.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
The real value my vary depending on manufacturing process variations.*/
|
||||
#endif /* HSI48_VALUE */
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S1 peripheral
|
||||
* This value is used by the RCC HAL module to compute the I2S1 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_I2S1_CLOCK_VALUE)
|
||||
#define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
|
||||
|
||||
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
||||
/**
|
||||
* @brief External clock source for I2S2 peripheral
|
||||
* This value is used by the RCC HAL module to compute the I2S2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_I2S2_CLOCK_VALUE)
|
||||
#define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* ################## CRYP peripheral configuration ########################## */
|
||||
|
||||
#define USE_HAL_CRYP_SUSPEND_RESUME 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include modules header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_adc.h"
|
||||
#include "stm32g0xx_hal_adc_ex.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FDCAN_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_fdcan.h"
|
||||
#endif /* HAL_FDCAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32g0xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for functions parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32G0xx_HAL_CONF_H */
|
||||
Loading…
Reference in New Issue