Board support for STM32F407VETx
This commit is contained in:
Andrew Hooper
parent
50e61e0e16
commit
3a5f43528e
|
|
@ -0,0 +1,177 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file LinkerScript.ld
|
||||
* @author Auto-generated by STM32CubeIDE
|
||||
* @brief Linker script for STM32F407VETx Device from STM32F4 series
|
||||
* 512Kbytes FLASH
|
||||
* 64Kbytes CCMRAM
|
||||
* 128Kbytes RAM
|
||||
*
|
||||
* Set heap size, stack size and stack location according
|
||||
* to application requirements.
|
||||
*
|
||||
* Set memory bank area and size if external memory is used
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
|
||||
|
||||
_Min_Heap_Size = 0x200 ; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400 ; /* required amount of stack */
|
||||
|
||||
/* Memories definition */
|
||||
MEMORY
|
||||
{
|
||||
CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K
|
||||
}
|
||||
|
||||
/* Sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code into "FLASH" Rom type memory */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data into "FLASH" Rom type memory */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data into "FLASH" Rom type memory */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : {
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM : {
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* Used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections into "RAM" Ram type memory */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
|
||||
} >RAM AT> FLASH
|
||||
|
||||
/* Uninitialized data section into "RAM" Ram type memory */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss section */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
/* Remove information from the compiler libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
set(MCU_VARIANT stm32f407xx)
|
||||
set(JLINK_DEVICE stm32f407ve)
|
||||
|
||||
set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F407VETx_FLASH.ld)
|
||||
set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
|
||||
|
||||
set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
|
||||
set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
STM32F407xx
|
||||
HSE_VALUE=8000000
|
||||
CORE_CM4
|
||||
BOARD_TUD_RHPORT=0
|
||||
BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
|
||||
)
|
||||
endfunction()
|
||||
|
|
@ -0,0 +1,107 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_6
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
// Button
|
||||
#define BUTTON_PORT GPIOE
|
||||
#define BUTTON_PIN GPIO_PIN_4
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// Enable PA2 as the debug log UART
|
||||
// It is not routed to the ST/Link on the Discovery board.
|
||||
#define UART_DEV USART2
|
||||
#define UART_GPIO_PORT GPIOA
|
||||
#define UART_GPIO_AF GPIO_AF7_USART2
|
||||
#define UART_TX_PIN GPIO_PIN_2
|
||||
#define UART_RX_PIN GPIO_PIN_3
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// RCC Clock
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void board_clock_init(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable Power Control clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/2000000;
|
||||
RCC_OscInitStruct.PLL.PLLN = 168;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
|
||||
|
||||
// Enable clocks for LED, Button, Uart
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
}
|
||||
|
||||
static inline void board_vbus_sense_init(void)
|
||||
{
|
||||
// Black F407VET6 doesn't use VBUS sense (B device) explicitly disable it
|
||||
USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
|
||||
USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN;
|
||||
USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN;
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
CFLAGS += -DSTM32F407xx
|
||||
|
||||
# GCC
|
||||
GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f407xx.s
|
||||
GCC_LD_FILE = $(BOARD_PATH)/STM32F407VGTx_FLASH.ld
|
||||
|
||||
# IAR
|
||||
IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f407xx.s
|
||||
IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f407xx_flash.icf
|
||||
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f407vg
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: flash-stlink
|
||||
|
|
@ -0,0 +1,493 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
// #define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE (32000U)
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE (3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,134 @@
|
|||
include_guard()
|
||||
|
||||
if (NOT BOARD)
|
||||
message(FATAL_ERROR "BOARD not specified")
|
||||
endif ()
|
||||
|
||||
set(ST_FAMILY f4)
|
||||
set(ST_PREFIX stm32${ST_FAMILY}xx)
|
||||
|
||||
set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
|
||||
set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
|
||||
set(CMSIS_5 ${TOP}/lib/CMSIS_5)
|
||||
|
||||
# include board specific
|
||||
include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
|
||||
|
||||
# toolchain set up
|
||||
set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
|
||||
set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
|
||||
|
||||
set(FAMILY_MCUS STM32F4 CACHE INTERNAL "")
|
||||
|
||||
# enable LTO if supported
|
||||
include(CheckIPOSupported)
|
||||
check_ipo_supported(RESULT IPO_SUPPORTED)
|
||||
if (IPO_SUPPORTED)
|
||||
set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
|
||||
endif ()
|
||||
|
||||
|
||||
#------------------------------------
|
||||
# BOARD_TARGET
|
||||
#------------------------------------
|
||||
# only need to be built ONCE for all examples
|
||||
function(add_board_target BOARD_TARGET)
|
||||
if (NOT TARGET ${BOARD_TARGET})
|
||||
add_library(${BOARD_TARGET} STATIC
|
||||
${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
|
||||
${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
|
||||
${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
|
||||
)
|
||||
target_include_directories(${BOARD_TARGET} PUBLIC
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}
|
||||
${CMSIS_5}/CMSIS/Core/Include
|
||||
${ST_CMSIS}/Include
|
||||
${ST_HAL_DRIVER}/Inc
|
||||
)
|
||||
target_compile_options(${BOARD_TARGET} PUBLIC
|
||||
)
|
||||
target_compile_definitions(${BOARD_TARGET} PUBLIC
|
||||
)
|
||||
|
||||
update_board(${BOARD_TARGET})
|
||||
|
||||
if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
|
||||
target_link_options(${BOARD_TARGET} PUBLIC
|
||||
"LINKER:--script=${LD_FILE_GNU}"
|
||||
-nostartfiles
|
||||
# nanolib
|
||||
--specs=nosys.specs
|
||||
--specs=nano.specs
|
||||
)
|
||||
elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
|
||||
target_link_options(${BOARD_TARGET} PUBLIC
|
||||
"LINKER:--config=${LD_FILE_IAR}"
|
||||
)
|
||||
endif ()
|
||||
endif ()
|
||||
endfunction()
|
||||
|
||||
|
||||
#------------------------------------
|
||||
# Functions
|
||||
#------------------------------------
|
||||
function(family_configure_example TARGET)
|
||||
family_configure_common(${TARGET})
|
||||
|
||||
# Board target
|
||||
add_board_target(board_${BOARD})
|
||||
|
||||
#---------- Port Specific ----------
|
||||
# These files are built for each example since it depends on example's tusb_config.h
|
||||
target_sources(${TARGET} PUBLIC
|
||||
# BSP
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
|
||||
)
|
||||
target_include_directories(${TARGET} PUBLIC
|
||||
# family, hw, board
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
|
||||
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
|
||||
)
|
||||
|
||||
# Add TinyUSB target and port source
|
||||
family_add_tinyusb(${TARGET} OPT_MCU_STM32F4)
|
||||
if (MCU_VARIANT STREQUAL "stm32f407xx")
|
||||
target_sources(${TARGET}-tinyusb PUBLIC
|
||||
${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
|
||||
)
|
||||
else()
|
||||
target_sources(${TARGET}-tinyusb PUBLIC
|
||||
${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
|
||||
)
|
||||
endif()
|
||||
target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
|
||||
|
||||
# Link dependencies
|
||||
target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
|
||||
|
||||
# Flashing
|
||||
family_flash_stlink(${TARGET})
|
||||
family_flash_jlink(${TARGET})
|
||||
endfunction()
|
||||
|
||||
|
||||
function(family_configure_device_example TARGET)
|
||||
family_configure_example(${TARGET})
|
||||
endfunction()
|
||||
|
||||
function(family_configure_host_example TARGET)
|
||||
family_configure_example(${TARGET})
|
||||
endfunction()
|
||||
|
||||
function(family_configure_dual_usb_example TARGET)
|
||||
family_configure_example(${TARGET})
|
||||
endfunction()
|
||||
|
|
@ -0,0 +1,493 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
// #define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE (32000U)
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE (3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Loading…
Reference in New Issue