hathach
62a746bdc7
wip
2020-05-26 12:18:36 +07:00
hathach
ba9c774a2a
board test work fine
2020-05-23 13:29:30 +07:00
hathach
4c01099a3d
update makefile to build with ohci host
...
update ses project for lpc1769 with rtt
2020-05-22 20:57:52 +07:00
hathach
f308990ab5
Merge branch 'master' into update-host
2020-05-22 15:28:22 +07:00
hathach
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
hathach
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
hathach
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
Mark Olsson
3c43009278
Add support for stm32f746nucleo board
2020-05-15 10:23:01 +02:00
Jerzy Kasenberg
615369a6eb
stm32l476disco: Fix system clock setup
...
Code suggested that PLL with MSI is used resulting in 80MHz clock.
When in fact PLL was not configured and system clock was left at MSI 48MHz.
This happens because PLL configuration requires that SysTick interrupt
has interrupt priority level configured correctly.
As it seems ST code intentionally setups variable uwTickPrio to invalid
value and later when it is not setup by user code configuration
of oscillator will fail before PLL is configured.
This simple changes systick priority to some valid value that
allows clock to use PLL.
2020-05-06 15:13:55 +02:00
Jerzy Kasenberg
d9e534f6f2
stm32l476disco: fix uninitialized filed usage
...
Field PLLState was not initialized in RCC_OscInitStruct.PLL in
function SystemClock_Config().
Value is used in HAL_RCC_OscConfig() regardless of oscillator.
In lucky case value would be 0 RCC_PLL_NONE and nothing would
happen.
If value was incorrect following line would end up in assert:
assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
If value was valid but no RCC_PLL_NONE pll could be configured
with some other random values.
Setting PLLState to RCC_PLL_NONE eliminates potential problem.
2020-05-06 14:25:46 +02:00
hathach
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
hathach
4a3a448340
clean up things, add makefile for host example
2020-05-04 00:29:52 +07:00
hathach
9538ca7d74
add uart for mcb1800
2020-05-03 14:50:12 +07:00
hathach
94fed7db0e
fix esp32 ci adding FREERTOS STATIC to sdkconfig default
2020-04-29 11:31:04 +07:00
hathach
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
hathach
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
hathach
afc4042375
add LOGGER option to use rtt
...
update example readme for debug log. Update bug template to ask for LOG
as well.
2020-04-22 17:08:41 +07:00
hathach
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
Ha Thach
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
hathach
989cca5b1a
update per review
2020-04-17 09:29:02 +07:00
hathach
bb2669fbc0
add dfu generate target for fomu
2020-04-16 22:24:48 +07:00
hathach
a009775745
dcd disconnect/connect for transdimension ip
2020-04-16 16:56:16 +07:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
hathach
d8d5902ccb
change saola-1 led to pin 18 by default
2020-04-10 15:44:50 +07:00
hathach
cefbd9579c
add neopixel led strip driver for saola, make saola as an component
2020-04-09 11:02:16 +07:00
hathach
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
hathach
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
hathach
fc9170b2c1
clean up
2020-04-08 15:15:52 +07:00
hathach
70df1aff13
add TODO for saola on-board neopixel
2020-04-08 15:00:16 +07:00
hathach
a2dee7fb50
rename saola to saola_1
2020-04-07 23:07:25 +07:00
hathach
6a9f971882
add saola button pin support, esp32 build with board_test
2020-04-07 13:42:48 +07:00
hathach
a344427e3f
fix CROSS_COMPILE for esp32s2
2020-04-06 20:39:20 +07:00
hathach
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
hathach
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
hathach
748cc88769
add saola board.mk
2020-04-03 12:20:06 +07:00
hathach
19f977a274
add esp32s2 saola bsp
...
update cdc_msc_freertos main.c to work with esp32s2
add CMake file
2020-04-01 20:24:46 +07:00
Ha Thach
a582674b91
Merge pull request #312 from hathach/develop
...
house keeping work
2020-03-29 00:40:36 +07:00
Nathan Conrad
3926b28faa
Update UARTs for stm32f4xx discovery boards. Other minor cleanups.
2020-03-28 12:05:30 -04:00
hathach
ad2824df8b
add ENTRY(Reset_Handler) to linker of samd21 and samd51 board
...
fix #303
2020-03-28 22:25:07 +07:00
Nathan Conrad
4191363c55
Update F4 BSP with new HAL config
2020-03-28 10:58:36 -04:00
Nathan Conrad
07c1ce76b8
Update F3 BSP for new HAL
2020-03-28 10:58:36 -04:00
Nathan Conrad
62a68034d9
Update F0 BSP for new HAL
2020-03-28 10:58:36 -04:00
hathach
1712b61ab6
added Arduino Nano 33 BLE with/without Sense
2020-03-28 21:34:42 +07:00
hathach
69698ed2e0
Merge branch 'master' into develop
2020-03-28 15:31:39 +07:00
Nathan Conrad
705d43cda7
Modify include of HAL, and remove CMSIS clock configuration code, and implement UART for STM32F407Disco
2020-03-26 10:10:06 -04:00
hathach
d74a92bf45
makefile clean up
...
allow board to define CROSS_COMPILE (default to arm gcc)
2020-03-25 14:06:51 +07:00
Ha Thach
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
Ha Thach
f2b761fee9
Merge pull request #306 from jeremyherbert/master
...
add support for seeeduino xiao
2020-03-24 14:37:38 +07:00
Jeremy Herbert
01820061b2
add support for seeeduino xiao
2020-03-23 23:39:53 -07:00
Ha Thach
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
William D. Jones
7e78e47444
msp_exp430f5529lp: Fix board.mk, remove .travis.yml.bck.
2020-03-24 00:40:25 -04:00
William D. Jones
27efedc9e6
msp_exp430f5529lp: Allow user to choose mspdebug as alternate programmer.
2020-03-23 23:45:22 -04:00
hathach
905c4b71d1
nrf use new cmsis_4 submodule for core header
2020-03-24 08:51:11 +07:00
hathach
056d0bb4bf
remove -Wnested-externs since many driver does this including CMSIS_5
2020-03-23 22:52:59 +07:00
hathach
9e0ffbe30f
house keeping
2020-03-23 22:51:17 +07:00
hathach
c47d9c3c68
upgrade nrfx from 2.0.0 to 2.1.0
2020-03-23 19:21:44 +07:00
Nathan Conrad
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
hathach
acbb535668
change msp430 flash tool from mspdebug to TI MSP430Flasher
2020-03-22 19:11:24 +07:00
hathach
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
hathach
45e32a787b
clean up
2020-03-11 14:13:34 +07:00
hathach
5fa1e6e242
hack to undef LITTLE_ENDIAN for samg55
2020-03-11 12:32:29 +07:00
hathach
ba74223c2e
fix more build
2020-03-11 00:58:28 +07:00
hathach
6a1416d18a
fix cortex M7, M23, M33 freertos build
2020-03-11 00:47:13 +07:00
hathach
487b887f80
freertos demo use static only for most optmized sram
2020-03-11 00:09:37 +07:00
hathach
65578dec44
update freertos example
...
work with samd21 samd51 and nrf
2020-03-10 23:16:09 +07:00
Ha Thach
41d9ab5056
Merge pull request #295 from hathach/develop
...
add webserver into ci build
2020-03-10 14:33:26 +07:00
hathach
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
hathach
85a3315a99
Adding lwip_webserver to ci
...
- buil_al.py skip specific MCU if .skip.MCU_ exists
- reduce stm32f070 heap & stack size to compile webserver
2020-03-09 15:51:29 +07:00
hathach
b638aabad8
add uart for feather nrf52840
2020-03-08 13:25:14 +07:00
hathach
659fc4f29e
added itsybitsy m0, m4
2020-03-07 18:26:39 +07:00
hathach
bdc5e3d3bc
added feather sense and CLUE
2020-03-07 18:02:54 +07:00
hathach
3ea95c2ab6
clean up LD_FILE using $(BOARD)
...
make it easier to duplicate bsp
2020-03-07 17:49:30 +07:00
hathach
800330cdf0
added feather nrf52840 sense
2020-03-07 17:27:59 +07:00
Peter Lawrence
6ab799c7eb
atomic GPIO operation in BSP
2020-02-11 14:34:07 -06:00
Peter Lawrence
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
Peter Lawrence
a8e66f0111
added CFG_EXAMPLE_MSC_READONLY to NuTuny-SDK-NUC120 board.mk
2020-01-25 13:32:31 -06:00
Peter Lawrence
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
hathach
0c1fff735d
skip nuc flash verify
2020-01-14 18:19:33 +07:00
hathach
4de9439fb1
more nuvoton support
...
- add LED for nutiny nuc 121, 125s, 126v
- flash target to use nuvoton's openocd fork
2020-01-14 18:13:42 +07:00
Peter Lawrence
64b435cf6e
correct apparent Adafruit typo in SAMD21 board.mk
2020-01-11 18:25:38 -06:00
hathach
43eff66d40
add raytac mdbt50q rx dongle
2020-01-10 16:51:24 +07:00
hathach
82c2674b19
clean up
2020-01-10 15:22:45 +07:00
hathach
287d45155d
added stm32f401 blackpill
2020-01-10 15:19:33 +07:00
hathach
4494720dbc
clean up HSE_VALUE for stm32
2020-01-10 15:14:37 +07:00
hathach
04cf337b79
clean up flash-stlink
2020-01-10 15:09:59 +07:00
hathach
dd6313a6ca
added stm32f411 blackpill
2020-01-10 00:28:46 +07:00
hathach
84bbe54e17
follow up to #261
...
- fix button pullup
- flash using teensy_loader_cli
- update boards.md
2020-01-09 22:04:11 +07:00
Lady Ada
8ead416865
add a rough bsp. UART on D0/D1, LED on D13, button on D12
2020-01-09 00:59:48 -05:00
hathach
8aef8d4b85
fix ci build
...
- nuc 121/125: add CFG_EXAMPLE_MSC_READONLY since it is not enough SRAM
to hold MSC disk
- nuc 126: drop i2c source files in compile list due to SDK driver
issue.
2020-01-07 16:57:18 +07:00
Ha Thach
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
Peter Lawrence
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
Ha Thach
97c216bc04
Merge pull request #257 from gsnxp/rt1010fix
...
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2020-01-01 13:35:36 +07:00
Greg Steiert
e06f4a3ffe
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2019-12-30 09:11:52 -08:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
Ha Thach
0b540fa55d
Merge pull request #234 from hathach/stm32f4-blackpill
...
move VBUS sense out of dcd_synosys to bsp
2019-12-12 10:00:17 +07:00
hathach
88bdb12ee5
close #204 define HSE_VALUE in _hal_conf instead of board.mk
2019-12-11 15:19:51 +07:00
hathach
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
hathach
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
hathach
9a8e6ed93b
added microchip submodule
2019-12-09 18:18:01 +07:00
hathach
69a801c027
change the samd submodule
2019-12-09 17:59:30 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
hathach
4c9c13c767
add uart sync support
2019-11-26 18:21:46 +07:00
hathach
387384c0d9
fix samg55 with newlib missing end symbol
2019-11-26 17:39:51 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
Ha Thach
64b05a1d5f
Merge pull request #225 from xobs/fomu-offset-fix
...
bsp: fomu: fix rom address for example programs
2019-11-24 11:18:53 +07:00
Sean Cross
a106c5114b
bsp: fomu: fix rom address for example programs
...
During development, the ROM address was at offset 0x2001a000
(due to the fact that the test program was located immediately
following the bitstream).
In normal Fomus, the ROM address is at offset 0x20040000, in order
to take into account additional bitstreams and bootloaders.
Correct the address to the offset in order to get examples working
with existing Fomus.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 01:15:31 +00:00
hathach
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
hathach
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
d1d8ded43b
added iMX RT1060 EVK board support
...
board_text, cdc_msc, hid_composite all work
2019-11-22 17:36:04 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
hathach
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
636c1475ba
clean up
2019-11-22 12:38:24 +07:00
hathach
627d9a2b33
adding irq to rt1064evk
2019-11-22 00:34:31 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
hathach
54d597b723
rt1064evk led, button, uart all work
2019-11-20 17:10:30 +07:00
hathach
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
hathach
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
Sean Cross
679821e917
fomu: bsp: don't call usb isr when usb is disabled
...
When compiled without usb support, we don't want to call the USB ISR.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:10:37 -08:00
Sean Cross
67267a9399
fomu: bsp: remove unused messible functions
...
These functions are unused in the current implementation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:08:56 -08:00
Sean Cross
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
25d5628063
fomu: csr: sync csr
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
f087cb1580
fomu: crt0: minor text refactor
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
77cf0b5bfd
fomu: csr: add version with next_ev register
...
The Fomu bitstream now includes a `USB_NEXT_EV` register to
indicate which is the next logical event to process. Add this
register to the CSR definition.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
83bca4a74f
fomu: semi-working commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
ef07427e06
bsp: fomu: update
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:13 -08:00
Sean Cross
ba889eeb9e
bsp: fomu: fix linker script overlap
...
The end of the data section was overlapping the start of the bss.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
Sean Cross
f152bed4b4
fomu: initial commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
hathach
23df777b30
update nxp_driver submodule for imx rt families
2019-11-11 12:14:54 +07:00
hathach
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
hathach
eca14a5ab3
re-add submodule nxp_driver
2019-11-11 11:38:30 +07:00
hathach
50cfc556d2
remove submodule lpc_driver
2019-11-11 11:33:50 +07:00
hathach
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
hathach
d65bc34bfe
added and tested nRF52833DK (pca10100)
2019-11-11 00:11:49 +07:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
hathach
2f19b9c100
update submodule nrfx to 2.0.0 for nrf52833 support
2019-11-10 21:04:55 +07:00
hathach
a19db3bdd2
added board nrf52840 mdk dongle
2019-11-10 20:07:43 +07:00
hathach
943b7467d8
correct LED, button and uart for feather_stm32f405
2019-11-09 00:08:32 +07:00
hathach
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
hathach
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
hathach
8cd19f88b9
clean up
2019-11-04 22:03:31 +07:00
hathach
42b55f6621
clean up
2019-11-04 15:00:44 +07:00
hathach
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
Nathan Conrad
68a53e05fc
Merge pull request #2 from hathach/pigrew-ZLP_Request2
...
zlp request2. PR for PR (has issues with STM32F0 FSDEV)
2019-11-03 17:50:41 -05:00
Nathan Conrad
cebc066813
Add UART HAL source file to stm32f070 makefile.
2019-11-03 15:25:55 -05:00
Nathan Conrad
5839159742
Enable UART debugging on F070.
2019-11-03 09:54:02 -05:00
hathach
585aebeb12
add uart support for stm32f072disco
2019-11-03 12:54:05 +07:00
William D. Jones
ffeb61a710
msp_exp430f5529lp: Use ti submodule for includes and linker files.
2019-10-29 11:43:26 -04:00
hathach
6e204ca567
add --allow-fw-update for convenience
2019-10-29 17:36:53 +07:00
hathach
71a4076e73
correct read()/write() retarget for msp430, fix msp430 button state
2019-10-29 16:24:09 +07:00
hathach
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
hathach
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
hathach
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
hathach
78bf82291e
add uart support for stm32f4nucleo board (via stlink cdc)
2019-10-19 18:19:59 +07:00
hathach
2f3f23fd94
change to use nrfx uarte
2019-10-18 18:30:09 +07:00
hathach
558b4dbde3
change DEBUG optimization option from O0 to Og
...
add uart write to board test example
2019-10-18 17:50:29 +07:00
hathach
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
hathach
d9ef34276b
update doc
2019-10-11 11:26:19 +07:00
hathach
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
hathach
f86f0e54a9
added ti_driver submodule
2019-10-07 15:06:36 +07:00
hathach
ada73a57c6
add ti_driver as submodule
2019-10-07 14:27:02 +07:00
William D. Jones
97af9e3332
msp_exp430f5529lp: Make board_millis atomic.
2019-10-06 20:44:06 -04:00
William D. Jones
16ff152129
msp_exp430f5529lp: Set up UART functionality.
2019-10-05 09:37:48 -04:00
Kamil Tomaszewski
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
hathach
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
hathach
13d37e4a36
lpcxpresso1549 board test running
2019-10-03 15:23:01 +07:00
hathach
7fd68efe7b
couldn't get 32L4 running with crystal less mode
2019-10-03 13:37:10 +07:00
William D. Jones
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
hathach
0a20e91cc9
move linker file to blue pill bsp
2019-10-02 14:23:23 +07:00
hathach
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
hathach
6479ee53d5
-Wno-error=cast-function-type is only available for gcc 8+, change travis dist to bionic
2019-10-01 15:43:28 +07:00
Nathan Conrad
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
hathach
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
William D. Jones
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
William D. Jones
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
William D. Jones
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
hathach
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
hathach
80b430fcfc
added stm32L0538 discovery board, board test exmaple works
2019-09-20 13:02:17 +07:00
William D. Jones
49f2507b38
msp_exp430f5529lp: Implement enough functionality for board_test.
2019-09-19 01:21:29 -04:00
hathach
3440083bfd
added board feather stm32f045
2019-09-18 14:38:56 +07:00
William D. Jones
772b0c17bf
rules.mk: Create an LDINC variable for linker script search path.
2019-09-14 21:16:10 -04:00
William D. Jones
d464c26ab2
msp430f5529: Remove -nostdlib and -nostartfiles, as the compiler
...
provides them.
2019-09-14 21:06:57 -04:00
William D. Jones
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
hathach
98a68d600c
Merge pull request #131 from cr1901/pyboard
...
Add PyBoard BSP
2019-09-14 16:31:43 +07:00
William D. Jones
d7137e36ca
pyboardv11: Fix typo in HSE_VALUE define so that SysTick runs at correct
...
frequency.
2019-09-14 04:32:10 -04:00
hathach
9e96c10014
Merge pull request #151 from hathach/develop
...
fix #139 , correct usbd request intepreting, Non-STD request to Interf… … …ace must be forward to class driver
2019-09-13 13:14:18 +07:00
hathach
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
Nathan Conrad
f830f6956e
Correct port assigned on the STM32F070 BSP
2019-09-12 14:53:53 -04:00
hathach
72046d957c
fix #145
2019-09-12 10:43:16 +07:00
hathach
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
William D. Jones
6b79f399a1
Merge branch 'master' of https://github.com/hathach/tinyusb into pyboard
2019-09-11 14:14:02 -04:00
hathach
a3f1c269e9
added stm32f767nucleo board, board_test works
2019-09-11 18:02:27 +07:00
hathach
de659be83e
tested all the stm32f4 board, work great
2019-09-11 17:37:23 +07:00
hathach
8a2b228c3f
ported stm32f3, close #67
2019-09-11 16:56:26 +07:00
hathach
ec50b274fc
added stm32f072disco board
...
close #104
2019-09-11 12:05:55 +07:00
hathach
3f02c35983
fix #130
2019-09-11 11:55:16 +07:00
hathach
34b76898da
adding stm32f072disco board, board_test example running
2019-09-11 11:41:47 +07:00
hathach
bf76a1e49e
Merge pull request #136 from hathach/develop
...
fix #132
2019-09-11 11:16:47 +07:00
hathach
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
William D. Jones
fc10ff2f05
Add pyboard (v1.1) BSP. cdc_msc_hid example tested.
2019-09-10 14:10:33 -04:00
Nathan Conrad
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
hathach
b6a5cf83c4
update st_driver
2019-09-10 23:55:45 +07:00
Nathan Conrad
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
Nathan Conrad
2cf2f35fa3
Correct JLINK_DEVICE and FREERTOS_PORT in F070RB make file. FreeRTOS and j-link are untested.
2019-09-10 08:28:56 -04:00
Nathan Conrad
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
Nathan Conrad
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
William D. Jones
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
hathach
b9b9f67698
ngx4330 usb0 work well
2019-09-09 17:30:43 +07:00
hathach
3497dd0264
adding ngx4330
2019-09-09 16:47:57 +07:00
hathach
218aaf94de
more clean up
2019-09-09 13:19:00 +07:00
hathach
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
hathach
8ac115a33e
clean up
2019-09-09 12:25:39 +07:00
hathach
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
hathach
642ff56b32
ported pca10059
2019-09-08 21:55:03 +07:00
hathach
8fd7836ff6
added board stm32f412 discovery, board_test exmaple run
2019-09-06 17:31:37 +07:00
hathach
b1296139d0
board test run with lpcxpresso 11u37
2019-09-06 15:49:42 +07:00
hathach
4ef3946a25
adding lpcxpresso11u37 board
2019-09-06 15:06:04 +07:00
hathach
192a95a96e
moving lpc11u6x
2019-09-06 12:07:48 +07:00
hathach
5fc6819ddb
update submodule st_driver with all stm32 families
2019-09-06 10:47:30 +07:00
hathach
aa50ba54ef
remove submodule stm32lib
2019-09-05 23:45:53 +07:00
hathach
fae8a944f0
swith stm32h7 to use st_driver
2019-09-05 23:39:09 +07:00
hathach
1d2223a116
switch stm32f3 to use st_driver
2019-09-05 22:41:58 +07:00
hathach
c4b384d22f
switch stm32f4 to use st_driver submodule
2019-09-05 22:12:43 +07:00
hathach
50b0826d4f
adding st_driver as submodule
2019-09-05 21:34:49 +07:00
hathach
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
hathach
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
hathach
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
hathach
dd07e743d8
added mbed lpc1768 board
2019-09-05 14:29:17 +07:00
hathach
2e00019aae
board_test work with lpcxpresso55s69
2019-09-03 13:25:36 +07:00
William D. Jones
4ce8796b2a
board_stm32h743nucleo: Implement user button for mouse/keyboard demo.
2019-09-03 01:28:41 -04:00
hathach
ee57113981
trying to add LPC55xx support
2019-09-02 15:53:12 +07:00
hathach
85fae75fba
clean up
2019-09-02 15:34:47 +07:00
hathach
6268f395eb
add button for stm32f407 and stm32f411 board
2019-09-02 14:58:46 +07:00
hathach
f2bbb75695
clean up
2019-09-01 22:44:56 +07:00
hathach
67d2cf39d5
clean up
2019-09-01 21:04:43 +07:00
hathach
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
hathach
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
hathach
403662a1d6
board_test run with lpc54114
2019-09-01 15:58:42 +07:00
hathach
fb1ca24b02
adding lpc54114 port
2019-09-01 15:30:25 +07:00
hathach
96f0f8d2d7
update lpc_driver
2019-09-01 15:13:56 +07:00
hathach
e99ff703dc
more lpc51u68 driver clean up
2019-09-01 15:11:09 +07:00
hathach
a5a768e5f7
update lpc51u68 linker
2019-09-01 14:58:36 +07:00
hathach
803d06d685
clean up
2019-09-01 14:51:40 +07:00
hathach
c18a7fd9ad
Port new board circuitplayground_bluefruit, close #109
2019-09-01 11:51:12 +07:00
hathach
7010ea79c4
added new board circuit playground express, close #110
2019-09-01 11:44:55 +07:00
hathach
c6f356b4f4
change feather/metro m4_express button to D5
2019-09-01 11:20:22 +07:00
hathach
f02a24a10f
change metro_m0_express button to D5
2019-09-01 11:11:26 +07:00
hathach
bb21568875
ported feather m0 express close #108
2019-09-01 11:10:28 +07:00
hathach
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
hathach
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
hathach
c782cc5429
add lpc_driver submobule
2019-08-31 23:20:18 +07:00
hathach
237c7018d9
remove submodule lpcopen
2019-08-31 23:19:35 +07:00
hathach
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
hathach
c70c61ce26
add button read to board_test example
2019-08-31 17:52:24 +07:00
William D. Jones
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
William D. Jones
0afbf1a9bb
board_stm32h743nucleo: Route USB clock and pins.
2019-08-26 16:48:24 -04:00
William D. Jones
1ef98e503a
board_stm32h743nucleo: Route major clocks and LED pins.
2019-08-26 14:20:13 -04:00
hathach
fa796de6cd
board_test example run with lpcxpresso51u68
2019-08-26 12:24:46 +07:00
William D. Jones
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
hathach
d4895c4af6
add board_test example for testing new board
2019-08-24 23:30:35 +07:00
hathach
b3acce17cc
adding lpc51u68 support
2019-08-24 00:52:46 +07:00
hathach
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
hathach
ba056de982
clean up
2019-08-05 22:12:20 +07:00
hathach
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
hathach
2b43bba453
add missing conf file
2019-07-22 18:54:13 +07:00
hathach
1594a9de71
stm32f411 usb work with example
2019-07-22 18:53:52 +07:00
hathach
be4eeeb943
refactor stm32f407 to use st hal api
2019-07-22 18:45:12 +07:00
hathach
cb8a33ca87
able to blink LED with stm32f411
2019-07-20 22:59:24 +07:00
hathach
ed698069d3
clean up
2019-07-20 22:41:45 +07:00
hathach
6ec87071ed
able to flash and turn on LED
2019-07-20 22:38:46 +07:00
hathach
fa12a0e786
adding stm32f411 disco
...
compile ok
2019-07-19 21:19:06 +07:00
hathach
e909270843
rename bsp of stm32 board
2019-07-19 20:37:38 +07:00
hathach
d2f53c552a
added adafruit feather m4 express board
2019-07-01 22:57:23 +07:00
hathach
90fea785c6
use adafruit-nrfutil dfu as default flash target for feather nrf52840
2019-05-29 16:56:26 +07:00
hathach
a619511631
run tud_task() in board_delay()
2019-05-29 16:55:54 +07:00
hathach
ce6976f400
better fix for #72 millis overthrow
2019-05-21 13:31:02 +07:00
hathach
73c7db38f7
fix #72 address overflow with board_delay
2019-05-21 11:38:46 +07:00
hathach
6861b670fc
add uf2 target for uf2 bootloader board: metro m0/m4 feather nrf52840
2019-05-20 12:35:33 +07:00
hathach
6e9324e29c
clean up
2019-05-15 18:16:48 +07:00
hathach
3278a9765b
ea4357 build with makefile, add to travis
2019-05-15 18:01:58 +07:00
hathach
7bd16aaf9b
add button for ea4357
2019-05-15 17:52:29 +07:00
hathach
15076006ca
ea4088 quickstart build with makefile
2019-05-15 17:24:21 +07:00
hathach
6e6f470b58
board clean up, add button for ea4088
2019-05-15 17:15:02 +07:00
hathach
b73047e350
change stm32lib submodule to our folk for now for flexibility
2019-05-15 16:58:08 +07:00
hathach
9863230a8d
update button for mcb1800
2019-05-15 16:17:46 +07:00
hathach
2d58f3118e
mcb1800 build and blinky with makefile
2019-05-15 16:09:44 +07:00
hathach
8ccecde18e
lpc1769 work with makefile
2019-05-15 12:57:31 +07:00
hathach
2582dfb3af
lpcxpresso 1769 build with makefile but not blinky yet
2019-05-15 11:34:40 +07:00
hathach
2e07a09b0d
add makefile support for lpcxpresso1347
2019-05-14 18:34:57 +07:00
hathach
3e1897b943
makefile work with lpc11u68
2019-05-14 17:51:05 +07:00
hathach
b1f8aa175e
add linker and startup for lpcxpresso11u68 board
...
able to build and blink LED
2019-05-14 17:37:11 +07:00
hathach
851cf5426a
more makefile clean up
2019-05-14 14:07:06 +07:00
hathach
8094bdce23
makefile clean up
2019-05-14 13:59:45 +07:00
hathach
62f0eb16d6
clean up
2019-05-14 13:31:12 +07:00
hathach
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
hathach
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
hathach
6446b02ae7
add hid_test.py for testing #58
...
add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
hathach
8a5bd30fa6
freertos cdc_msc_hid makefile compile
2019-05-01 16:01:44 +07:00
hathach
0f3da42db8
add make.mk and rules.mk to help new makefile example
2019-05-01 14:27:17 +07:00
hathach
4d29decafc
upgrade nrfx to 1.7
2019-05-01 13:52:21 +07:00
hathach
307ba23046
wrap up hid device refactor
2019-04-18 22:31:35 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
5f3ab2afe1
rename board_led_control to board_led_write
2019-04-02 18:16:04 +07:00
hathach
2c1072c0ab
fix build error with stm32
2019-04-02 02:16:54 +07:00
hathach
e9851f5042
clean up
2019-04-02 01:20:51 +07:00
hathach
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
hathach
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
hathach
38f7d281d4
more board clean up
2019-03-27 21:06:44 +07:00
hathach
3dfb251c1e
clean up
2019-03-27 16:32:07 +07:00
hathach
315076375f
fix timer prio for freertos to blink led
2019-03-25 00:40:51 +07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
29e075b8b9
clean up bsp, adde board_millis()
2019-03-23 22:31:07 +07:00
hathach
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
hathach
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
hathach
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
hathach
2533f4004e
adding stm32f3 support
2019-03-22 15:27:03 +07:00
hathach
8b7c4ade71
clean up
2019-03-22 14:55:00 +07:00
hathach
20fb416783
clean board uart read & write
2019-03-20 20:58:27 +07:00
hathach
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
hathach
6787fbeff0
move lpcopen to its own repo (submodule)
2019-03-20 12:37:25 +07:00
hathach
f2f3f5a772
fix pca10056 build error due to nrfx undef usage
2019-03-20 01:35:52 +07:00
hathach
e6612ab82c
move -nostdlib (-nostartfiles) into board.mk
...
since nrf5x require the use of std startup. Add verbose mode to makefile
2019-03-20 01:23:49 +07:00
hathach
d22dea4976
update nrfx to 1.6.2
2019-03-19 19:09:08 +07:00
hathach
1062910348
readme clean up
2019-03-19 16:51:41 +07:00
hathach
0fcd263df3
stm32f place startup*.o first in linking order due to gcc flto bug
...
ref: https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966
2019-03-19 16:41:00 +07:00
hathach
11eed2f026
update flash-jlink target for m0 and m4 board
2019-03-17 15:42:57 +07:00
hathach
d56e7fd913
adding flash (jlink)
2019-03-16 01:34:26 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
hathach
ddfc32f5ec
adding segger project for stm32f4
2019-03-10 01:24:13 +07:00
hathach
0ff7d609f0
add flash target for stm32 board using stm32cubeprogammger cli
2019-03-09 01:04:26 +07:00
hathach
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
William D. Jones
49aa6ec251
st: Use submodules for system files when possible, use more up to date
...
files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect
changes.
2019-03-04 10:41:05 -05:00
William D. Jones
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
6752a71264
usb work when sd is init first
2019-01-29 18:02:25 +07:00
hathach
c81b56eb45
nrf5x usb init before sd works
2019-01-29 17:05:53 +07:00
hathach
d8b361fdaa
add S140 v6 build config for nrf5x
2019-01-29 14:15:13 +07:00
William D. Jones
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
William D. Jones
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
William D. Jones
e73e016a8c
bsp.stm32f407g_disc1: Initialize USB clock and pins.
2019-01-11 10:20:14 -05:00
William D. Jones
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
William D. Jones
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
hathach
e6224bccf9
adding makefile support for nrf5x
...
got undefined reference to `_start'
2019-01-02 22:35:42 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
b562fa741b
Update readme.md
2018-12-12 23:08:08 +07:00
hathach
142f274c1d
docs update
2018-12-12 16:35:53 +07:00
hathach
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
hathach
3ab9c2f64a
add host ea4088qs, but not work
2018-12-07 22:00:34 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
f769ecddaf
fix warning with lpcopen
2018-12-07 14:49:07 +07:00
hathach
5d4d3431c2
host port plugged isr detect, but control xfer not work
2018-12-06 00:10:49 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
d7c0f0aab5
clean up mcb1800
2018-12-04 13:32:59 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
d40663d403
added lpc18 lpcopen
2018-12-04 12:39:48 +07:00
hathach
819a03c14d
clean up
2018-12-03 23:46:28 +07:00
hathach
3a573fdd89
update pca10056, clean files
2018-12-03 23:39:34 +07:00
hathach
a39516e03d
update board metro0 and metro4
2018-12-03 23:33:40 +07:00
hathach
a9e015d619
forgot to add ea4357 files
2018-12-03 23:23:59 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
29416a5c1a
remove 43xx usbd rom
2018-12-03 22:54:33 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
087c5d0de6
remove lpc17 usbd
2018-12-03 21:20:55 +07:00
hathach
920d88d256
clean up
2018-12-03 20:34:32 +07:00
hathach
f614586964
clean up
2018-12-03 20:33:17 +07:00
hathach
68a0e866c5
ea4357 led
2018-12-03 20:32:24 +07:00
hathach
a9161ed0d7
clean up
2018-12-03 19:04:57 +07:00
hathach
cea9abd4d0
clean up lpc13
2018-12-03 19:02:35 +07:00
hathach
f8ea10dc9a
update board led to use only one led
2018-12-03 18:48:43 +07:00
hathach
28d7408b3f
fix compiler warning
2018-12-03 18:02:03 +07:00
hathach
72db014f2c
remove legacy lpc17 prph driver
2018-12-03 17:44:08 +07:00
hathach
5f10584983
moving lpc17xx to use lpcopen
2018-12-03 17:28:38 +07:00
hathach
f898f8f7a4
move lpc_chip_13xx files
2018-12-03 16:38:29 +07:00
hathach
ea37c96d15
remove legacy lpc11u chip driver
2018-12-03 16:33:54 +07:00
hathach
f9ae8fa5d2
fix board issue with lpcxpresso 1347
2018-12-03 16:13:44 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
89d96b92af
fix lpc11u68 bsp issue, able to blink
2018-12-01 21:58:24 +07:00
hathach
363d9b9b2a
add lpcopne lpc43xx files
2018-12-01 02:20:36 +07:00
hathach
102a761e8e
able to build lpc11u68
2018-12-01 02:17:20 +07:00
hathach
a157c7fdc9
add lpc11u68 ses file
2018-12-01 01:43:57 +07:00
hathach
c1186ad6a9
add lpcopen lpc11u6x files
2018-12-01 01:34:19 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
ac55fb5d02
rename
2018-11-30 13:06:52 +07:00
hathach
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
hathach
0bc80dc386
clean up
2018-11-29 23:49:08 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
hathach
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
hathach
3fe392414d
Merge branch 'develop' into devlocal
2018-11-29 20:02:16 +07:00
Scott Shawcroft
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
Scott Shawcroft
db42207fcd
Add a porting doc and make a pass over the others.
...
Fixes #5
2018-11-27 18:07:22 -08:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
Scott Shawcroft
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
hathach
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
hathach
b20cb8852a
build ok
2018-11-22 16:49:27 +07:00
hathach
c3c446f7db
adding lpc43xx to ses
2018-11-22 16:28:01 +07:00
hathach
d2d833c0ab
update freertos ses project
2018-11-22 01:04:18 +07:00
hathach
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
hathach
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
hathach
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
hathach
5bccb234ee
samd21 has usb traffic
2018-11-21 12:24:18 +07:00
hathach
c5d9a477c0
samd21 metro m0 blink too fast, still have issue with clock init
2018-11-21 00:32:17 +07:00
hathach
eadcba75a2
has issue with metro m0 clock init
2018-11-21 00:19:38 +07:00
hathach
a46b42a54e
move metro m4 clock init to board
2018-11-21 00:12:11 +07:00
hathach
867d3cb02d
able to build and blink with metro m0
2018-11-20 23:49:37 +07:00
hathach
18f8217f4f
adding samd21 metro m0 support
2018-11-20 23:19:59 +07:00
hathach
5e65886fdd
samd51 metro m4 add init_mcu() and usb init
...
- device regconized on bus but doesnt response with setup packet.
- temp disable msc
2018-11-20 01:23:53 +07:00
hathach
6c842338d6
remove samd-peripherals submodule
2018-11-20 00:57:34 +07:00
hathach
ee399bd27b
add sand51 project to ses
2018-11-14 15:25:58 +07:00
hathach
eea1f8597e
added board led for metro m4
2018-11-14 13:28:39 +07:00
hathach
4b1f4c7b6f
add Adafruit samd-peripherals as submodule.
...
clean up board
2018-11-14 00:22:49 +07:00
hathach
2e2100078c
adding Adafruit metro m0/m4 express
2018-11-13 22:49:37 +07:00
hathach
3fe7cd1659
added tud_cdc_write_str, tu_fifo only use mutex for RTOS config
2018-11-13 15:45:22 +07:00
hathach
5a046799f6
clean up board.h
2018-11-13 12:32:15 +07:00
hathach
b6bd5458d2
add samd asf4 submodule repo from Adafruit
2018-11-13 11:42:19 +07:00
hathach
87d89cf5cb
fix nrf52 freeRTOS interrupt priority
2018-10-24 16:48:27 +07:00
hathach
c65e5b406f
add mcu specific freeRTOSConfig.h
2018-10-24 13:45:17 +07:00
hathach
2891ff486a
simplify qspi flash with blocking API
2018-10-23 19:54:06 +07:00
hathach
a660fb0cfc
clean up, update nrfx to 1.3.0
2018-09-25 12:57:46 +07:00
hathach
3b79ba8451
update qspi
2018-09-11 22:37:44 +07:00
hathach
154daf584c
better qspi
2018-09-08 16:39:42 +07:00
hathach
8572947da5
qspi msc flash seems to work
2018-09-08 00:15:34 +07:00
hathach
a0ae452987
rename example files
2018-09-07 17:28:25 +07:00
hathach
c06014078a
more clean up
2018-09-07 17:05:21 +07:00
hathach
fc231cf5f2
clean up
2018-09-02 16:39:28 +07:00
hathach
d18a9e8759
freertos blinky with software timer
2018-08-23 14:11:21 +07:00
hathach
5dd02cbdd3
house keeping
2018-07-27 16:59:57 +07:00
hathach
86c445cd71
move nrf_drv_usbd_errata to portable folder
2018-07-26 16:12:09 +07:00
hathach
546f2a1165
nrf52840 example work with boot keyboard
2018-07-24 00:10:22 +07:00
hathach
4342325ee1
reworking device hid class driver
2018-07-23 15:25:45 +07:00
hathach
142300ca60
remove sdk, add nrfx as submodule
...
update segger project to work with nrfx
2018-07-02 11:00:05 +07:00
hathach
19eb62ebe4
update auto descriptor
2018-07-01 15:45:04 +07:00
hathach
d1ecef4fc3
correct errata check for nrf52840 first production
2018-06-13 14:25:33 +07:00
hathach
1d428b7fef
get nrf5x hal work with SD and non_SD configure
2018-05-15 12:37:48 +07:00
hathach
8c0a5f7d3b
update nrf52840 examples
2018-04-18 18:05:08 +07:00
hathach
29071c10b1
rename CFG_TUSB_CONTROLLER_0_MODE to CFG_TUSB_RHPORT0_MODE
2018-04-14 14:08:48 +07:00
hathach
4b660175be
rename CFG_TUSB_DEVICE_* to CFG_TUD_*
2018-04-12 13:23:52 +07:00
hathach
3d31f92106
rename OPT_MODE_
2018-04-12 13:17:58 +07:00
hathach
e1272159d8
rename MCU_ to OPT_MCU
2018-04-12 13:04:48 +07:00
hathach
18f97fef7e
rename TUSB_OS_NONE, TUSB_OS_FREERTOS to OPT_OS_NONE, OPT_OS_FREERTOS
2018-04-12 12:55:53 +07:00
hathach
3c24671960
mass rename TUSB_CFG to CFG_TUSB
2018-04-10 14:31:11 +07:00
hathach
82da013dad
get freertos build
2018-03-30 15:33:36 +07:00
hathach
97db3c7c3d
update nrf52 hal millis
2018-03-29 18:10:01 +07:00
hathach
e2f9744369
rename tusb_hal_tick_get to tusb_hal_millis
...
rename TUSB_CFG_TICKS_HZ to BOARD_TICKS_HZ
2018-03-29 18:03:04 +07:00
hathach
24d4b27980
move nrf5x port files
2018-03-26 22:46:53 +07:00
hathach
cf8a85fa8b
moving lpc43xx port into tusb's portable folder
2018-03-26 22:44:45 +07:00
hathach
5f26c57b28
shorten descriptor type
2018-03-23 12:32:40 +07:00
hathach
2c18805aa9
move mcu usb port back to tinyusb's portable folder
2018-03-23 12:24:24 +07:00
hathach
6d50d05d95
rename port to rhport for clarification
2018-03-23 12:17:47 +07:00
hathach
98d6ec1ef5
remove DCD API dependency tusb_dcd_edpt_queue_xfer
...
improve MSC driver
2018-03-23 11:56:52 +07:00
hathach
16aa3eb437
simplify tusb_dcd_edpt_xfer API
2018-03-22 17:52:39 +07:00
hathach
3ed83c4d98
merge tusb_dcd_control_stall() to tusb_dcd_edpt_stall()
2018-03-21 16:08:42 +07:00
hathach
9a487a238a
remove int_on_complete for tusb_dcd_control_xfer
2018-03-21 15:36:44 +07:00
hathach
ff5957ec73
fix lpc43xx isr issue, fix control status response for usbd
2018-03-21 15:32:35 +07:00
hathach
64c43634e2
adding toolchain file from sdk
2018-03-20 22:11:39 +07:00
hathach
ba88d9bc16
add sdk/device
2018-03-20 21:37:23 +07:00
hathach
0fdec33521
wrap up nrf52 demo
2018-03-20 20:57:49 +07:00
hathach
9f5fcb64ed
update code, remove nrf_drv_clock dependency
2018-03-20 19:52:21 +07:00
hathach
2f0fcf80e0
nrf52 cdc example work on nrf52840pdk
...
- add tud_cdc_flush(), auto flush with sof is enabled by default.
-
2018-03-20 18:33:28 +07:00
hathach
7a628f4dfc
adding bulk/int support
...
still does not work though
2018-03-17 02:17:40 +07:00
hathach
87a2c935df
add dma guard
2018-03-15 17:09:55 +07:00
hathach
b0ec6124e0
nrf52 control transfer work reliably
2018-03-15 13:22:28 +07:00
hathach
49a7f8c363
adding segger files
2018-03-14 22:03:32 +07:00
hathach
7feab4d1a2
able to get pass enumeration
2018-03-14 22:01:29 +07:00
hathach
fc82ab3c97
nrf52 finish usbd startup, able to got setup packet
2018-03-14 15:21:47 +07:00
hathach
b33e89ac66
adding code for nrf52 usbd start-up sequence
2018-03-13 16:59:51 +07:00
hathach
3223aa1b74
house keeping
2018-03-13 16:33:23 +07:00
hathach
ffca1f5e64
working on nrf52
2018-03-13 16:30:53 +07:00
hathach
2435abb0a8
rename hal to tusb_port
2018-03-12 23:46:58 +07:00
hathach
34dbb3532c
more rename
2018-03-12 22:45:35 +07:00
hathach
80398cb4cb
more hcd clean up
2018-03-12 22:37:12 +07:00
hathach
26d81c3ea1
rename TUSB_DIR_OUT, TUSB_DIR_IN
2018-03-11 20:20:59 +07:00
hathach
ca13d59682
rename tusb_dir_t
2018-03-11 20:16:39 +07:00
hathach
cfdc7999f6
refactor dcd API, drop edpt_hdl_t in favor of endpoint address for easy port
2018-03-11 15:20:27 +07:00