kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

added support for Nuvoton NUC120

This commit is contained in:
Peter Lawrence 2020-01-25 13:10:32 -06:00
parent 0d3a7257f5
commit cd8eb2a06b
6 changed files with 808 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
hw/bsp/nutiny_sdk_nuc120/board.mk Normal file
View File

@ -0,0 +1,56 @@
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs-linux \
-mcpu=cortex-m0 \
-DCFG_TUSB_MCU=OPT_MCU_NUC120
# All source paths should be relative to the top level.
LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld
SRC_C += \
hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/acmp.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/adc.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/clk.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/crc.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/fmc.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/gpio.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2c.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/i2s.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/pdma.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/ps2.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/pwm.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/rtc.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/sc.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/spi.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/sys.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/timer.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/uart.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/usbd.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/wdt.c \
hw/mcu/nuvoton/nuc100_120/StdDriver/src/wwdt.c
SRC_S += \
hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S
INC += \
$(TOP)/hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Include \
$(TOP)/hw/mcu/nuvoton/nuc100_120/StdDriver/inc \
$(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include
# For TinyUSB port source
VENDOR = nuvoton
CHIP_FAMILY = nuc120
# For freeRTOS port source
FREERTOS_PORT = ARM_CM0
# For flash-jlink target
JLINK_DEVICE = NUC120LE3
JLINK_IF = swd
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"

195
hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld Normal file
View File

@ -0,0 +1,195 @@
/* Linker script to configure memory regions. */
MEMORY
{
FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x20000 /* 128k */
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x4000 /* 16k */
}
/* Library configurations */
GROUP(libgcc.a libc.a libm.a libnosys.a)
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __copy_table_start__
* __copy_table_end__
* __zero_table_start__
* __zero_table_end__
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* __Vectors_End
* __Vectors_Size
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.vectors))
__Vectors_End = .;
__Vectors_Size = __Vectors_End - __Vectors;
__end__ = .;
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
/* To copy multiple ROM to RAM sections,
* uncomment .copy.table section and,
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
/*
.copy.table :
{
. = ALIGN(4);
__copy_table_start__ = .;
LONG (__etext)
LONG (__data_start__)
LONG (__data_end__ - __data_start__)
LONG (__etext2)
LONG (__data2_start__)
LONG (__data2_end__ - __data2_start__)
__copy_table_end__ = .;
} > FLASH
*/
/* To clear multiple BSS sections,
* uncomment .zero.table section and,
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
/*
.zero.table :
{
. = ALIGN(4);
__zero_table_start__ = .;
LONG (__bss_start__)
LONG (__bss_end__ - __bss_start__)
LONG (__bss2_start__)
LONG (__bss2_end__ - __bss2_start__)
__zero_table_end__ = .;
} > FLASH
*/
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (COPY):
{
__HeapBase = .;
__end__ = .;
end = __end__;
KEEP(*(.heap*))
__HeapLimit = .;
} > RAM
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
KEEP(*(.stack*))
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
}

122
hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c Normal file
View File

@ -0,0 +1,122 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "bsp/board.h"
#include "NUC100Series.h"
#include "clk.h"
#include "sys.h"
#define LED_PORT PB
#define LED_PIN 0
#define LED_PIN_IO PB0
#define LED_STATE_ON 0
void board_init(void)
{
SYS_UnlockReg();
/* Enable Internal RC 22.1184 MHz clock */
CLK_EnableXtalRC(CLK_PWRCON_OSC22M_EN_Msk);
/* Waiting for Internal RC clock ready */
CLK_WaitClockReady(CLK_CLKSTATUS_OSC22M_STB_Msk);
/* Switch HCLK clock source to Internal RC and HCLK source divide 1 */
CLK_SetHCLK(CLK_CLKSEL0_HCLK_S_HIRC, CLK_CLKDIV_HCLK(1));
/* Enable external XTAL 12 MHz clock */
CLK_EnableXtalRC(CLK_PWRCON_XTL12M_EN_Msk);
/* Waiting for external XTAL clock ready */
CLK_WaitClockReady(CLK_CLKSTATUS_XTL12M_STB_Msk);
/* Set core clock */
CLK_SetCoreClock(48000000);
/* Enable module clock */
CLK_EnableModuleClock(USBD_MODULE);
/* Select module clock source */
CLK_SetModuleClock(USBD_MODULE, 0, CLK_CLKDIV_USB(1));
SYS_LockReg();
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(48000000 / 1000);
#endif
GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_PMD_OUTPUT);
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
#if 0
/* this would be the simplest solution... *IF* the part supported the pin data interface */
LED_PIN_IO = (state) ? LED_STATE_ON : (1-LED_STATE_ON);
#else
/* if the part's *PDIO pin data registers don't work, a more elaborate approach is needed */
uint32_t irq_state = __get_PRIMASK();
__disable_irq();
uint32_t current = LED_PORT->DOUT & ~(1UL << LED_PIN);
LED_PORT->DOUT = current | (((state) ? LED_STATE_ON : (1UL-LED_STATE_ON)) << LED_PIN);
__set_PRIMASK(irq_state);
#endif
}
uint32_t board_button_read(void)
{
return 0;
}
int board_uart_read(uint8_t* buf, int len)
{
(void) buf; (void) len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
(void) buf; (void) len;
return 0;
}

2
hw/mcu/nuvoton

@ -1 +1 @@
Subproject commit dc96fff794d14818c93ea1d4d760d51a014d70c5
Subproject commit 797dc6cd55c84aa6c23c4690da2f3900339a6e24

433
src/portable/nuvoton/nuc120/dcd_nuc120.c Normal file
View File

@ -0,0 +1,433 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019-2020 Peter Lawrence
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
/*
Theory of operation:
The NUC100/NUC120 USBD peripheral has six "EP"s, but each is simplex,
so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to
implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for
EP0_IN and EP0_OUT respectively. This leaves up to four for user usage.
*/
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC120)
#include "device/dcd.h"
#include "NUC100Series.h"
/* allocation of USBD RAM for Setup, EP0_IN, and and EP_OUT */
#define PERIPH_SETUP_BUF_BASE 0
#define PERIPH_SETUP_BUF_LEN 8
#define PERIPH_EP0_BUF_BASE (PERIPH_SETUP_BUF_BASE + PERIPH_SETUP_BUF_LEN)
#define PERIPH_EP0_BUF_LEN CFG_TUD_ENDPOINT0_SIZE
#define PERIPH_EP1_BUF_BASE (PERIPH_EP0_BUF_BASE + PERIPH_EP0_BUF_LEN)
#define PERIPH_EP1_BUF_LEN CFG_TUD_ENDPOINT0_SIZE
#define PERIPH_EP2_BUF_BASE (PERIPH_EP1_BUF_BASE + PERIPH_EP1_BUF_LEN)
/* rather important info unfortunately not provided by device include files: how much there is */
#define USBD_BUF_SIZE 512
enum ep_enum
{
PERIPH_EP0 = 0,
PERIPH_EP1 = 1,
PERIPH_EP2 = 2,
PERIPH_EP3 = 3,
PERIPH_EP4 = 4,
PERIPH_EP5 = 5,
PERIPH_MAX_EP,
};
/* set by dcd_set_address() */
static volatile uint8_t assigned_address;
/* reset by dcd_init(), this is used by dcd_edpt_open() to assign USBD peripheral buffer addresses */
static uint32_t bufseg_addr;
/* used by dcd_edpt_xfer() and the ISR to reset the data sync (DATA0/DATA1) in an EP0_IN transfer */
static bool active_ep0_xfer;
/* RAM table needed to track ongoing transfers performed by dcd_edpt_xfer(), dcd_in_xfer(), and the ISR */
static struct xfer_ctl_t
{
uint8_t *data_ptr; /* data_ptr tracks where to next copy data to (for OUT) or from (for IN) */
union {
uint16_t in_remaining_bytes; /* for IN endpoints, we track how many bytes are left to transfer */
uint16_t out_bytes_so_far; /* but for OUT endpoints, we track how many bytes we've transferred so far */
};
uint16_t max_packet_size; /* needed since device driver only finds out this at runtime */
uint16_t total_bytes; /* quantity needed to pass as argument to dcd_event_xfer_complete() (for IN endpoints) */
} xfer_table[PERIPH_MAX_EP];
/*
local helper functions
*/
static void usb_attach(void)
{
USBD->DRVSE0 &= ~USBD_DRVSE0_DRVSE0_Msk;
}
static void usb_detach(void)
{
USBD->DRVSE0 |= USBD_DRVSE0_DRVSE0_Msk;
}
static void usb_control_send_zlp(void)
{
USBD->EP[PERIPH_EP0].CFG |= USBD_CFG_DSQ_SYNC_Msk;
USBD->EP[PERIPH_EP0].MXPLD = 0;
}
/* reconstruct ep_addr from particular USB Configuration Register */
static uint8_t decode_ep_addr(USBD_EP_T *ep)
{
uint8_t ep_addr = ep->CFG & USBD_CFG_EP_NUM_Msk;
if ( USBD_CFG_EPMODE_IN == (ep->CFG & USBD_CFG_STATE_Msk) )
ep_addr |= TUSB_DIR_IN_MASK;
return ep_addr;
}
/* map 8-bit ep_addr into peripheral endpoint index (PERIPH_EP0...) */
static USBD_EP_T *ep_entry(uint8_t ep_addr, bool add)
{
USBD_EP_T *ep;
enum ep_enum ep_index;
for (ep_index = PERIPH_EP0, ep = USBD->EP; ep_index < PERIPH_MAX_EP; ep_index++, ep++)
{
if (add)
{
/* take first peripheral endpoint that is unused */
if (0 == (ep->CFG & USBD_CFG_STATE_Msk)) return ep;
}
else
{
/* find a peripheral endpoint that matches ep_addr */
uint8_t candidate_ep_addr = decode_ep_addr(ep);
if (candidate_ep_addr == ep_addr) return ep;
}
}
return NULL;
}
/* perform an IN endpoint transfer; this is called by dcd_edpt_xfer() and the ISR */
static void dcd_in_xfer(struct xfer_ctl_t *xfer, USBD_EP_T *ep)
{
uint16_t bytes_now = tu_min16(xfer->in_remaining_bytes, xfer->max_packet_size);
memcpy((uint8_t *)(USBD_BUF_BASE + ep->BUFSEG), xfer->data_ptr, bytes_now);
ep->MXPLD = bytes_now;
}
/* called by dcd_init() as well as by the ISR during a USB bus reset */
static void bus_reset(void)
{
USBD->STBUFSEG = PERIPH_SETUP_BUF_BASE;
for (enum ep_enum ep_index = PERIPH_EP0; ep_index < PERIPH_MAX_EP; ep_index++)
{
USBD->EP[ep_index].CFG = 0;
USBD->EP[ep_index].CFGP = 0;
}
/* allocate the default EP0 endpoints */
USBD->EP[PERIPH_EP0].CFG = USBD_CFG_CSTALL_Msk | USBD_CFG_EPMODE_IN;
USBD->EP[PERIPH_EP0].BUFSEG = PERIPH_EP0_BUF_BASE;
xfer_table[PERIPH_EP0].max_packet_size = PERIPH_EP0_BUF_LEN;
USBD->EP[PERIPH_EP1].CFG = USBD_CFG_CSTALL_Msk | USBD_CFG_EPMODE_OUT;
USBD->EP[PERIPH_EP1].BUFSEG = PERIPH_EP1_BUF_BASE;
xfer_table[PERIPH_EP1].max_packet_size = PERIPH_EP1_BUF_LEN;
/* USB RAM beyond what we've allocated above is available to the user */
bufseg_addr = PERIPH_EP2_BUF_BASE;
/* Reset USB device address */
USBD->FADDR = 0;
/* reset EP0_IN flag */
active_ep0_xfer = false;
}
/* centralized location for USBD interrupt enable bit mask */
static const uint32_t enabled_irqs = USBD_INTSTS_FLDET_STS_Msk | USBD_INTSTS_BUS_STS_Msk | USBD_INTSTS_SETUP_Msk | USBD_INTSTS_USB_STS_Msk;
/*
NUC100/NUC120 TinyUSB API driver implementation
*/
void dcd_init(uint8_t rhport)
{
(void) rhport;
USBD->ATTR = 0x7D0;
usb_detach();
bus_reset();
usb_attach();
USBD->INTSTS = enabled_irqs;
USBD->INTEN = enabled_irqs;
}
void dcd_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USBD_IRQn);
}
void dcd_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USBD_IRQn);
}
void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
{
(void) rhport;
usb_control_send_zlp(); /* SET_ADDRESS is the one exception where TinyUSB doesn't use dcd_edpt_xfer() to generate a ZLP */
assigned_address = dev_addr;
}
void dcd_set_config(uint8_t rhport, uint8_t config_num)
{
(void) rhport;
(void) config_num;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;
USBD->ATTR = USBD_ATTR_RWAKEUP_Msk;
}
bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
{
(void) rhport;
USBD_EP_T *ep = ep_entry(p_endpoint_desc->bEndpointAddress, true);
TU_ASSERT(ep);
/* mine the data for the information we need */
int const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress);
int const size = p_endpoint_desc->wMaxPacketSize.size;
tusb_xfer_type_t const type = p_endpoint_desc->bmAttributes.xfer;
struct xfer_ctl_t *xfer = &xfer_table[ep - USBD->EP];
/* allocate buffer from USB RAM */
ep->BUFSEG = bufseg_addr;
bufseg_addr += size;
TU_ASSERT(bufseg_addr <= USBD_BUF_SIZE);
/* construct USB Configuration Register value and then write it */
uint32_t cfg = tu_edpt_number(p_endpoint_desc->bEndpointAddress);
cfg |= (TUSB_DIR_IN == dir) ? USBD_CFG_EPMODE_IN : USBD_CFG_EPMODE_OUT;
if (TUSB_XFER_ISOCHRONOUS == type)
cfg |= USBD_CFG_TYPE_ISO;
ep->CFG = cfg;
/* make a note of the endpoint size */
xfer->max_packet_size = size;
return true;
}
bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes)
{
(void) rhport;
/* mine the data for the information we need */
tusb_dir_t dir = tu_edpt_dir(ep_addr);
USBD_EP_T *ep = ep_entry(ep_addr, false);
struct xfer_ctl_t *xfer = &xfer_table[ep - USBD->EP];
/* store away the information we'll needing now and later */
xfer->data_ptr = buffer;
xfer->in_remaining_bytes = total_bytes;
xfer->total_bytes = total_bytes;
/* for the first of one or more EP0_IN packets in a message, the first must be DATA1 */
if ( (0x80 == ep_addr) && !active_ep0_xfer ) ep->CFG |= USBD_CFG_DSQ_SYNC_Msk;
if (TUSB_DIR_IN == dir)
{
dcd_in_xfer(xfer, ep);
}
else
{
xfer->out_bytes_so_far = 0;
ep->MXPLD = xfer->max_packet_size;
}
return true;
}
void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
USBD_EP_T *ep = ep_entry(ep_addr, false);
ep->CFGP |= USBD_CFGP_SSTALL_Msk;
}
void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
USBD_EP_T *ep = ep_entry(ep_addr, false);
ep->CFG |= USBD_CFG_CSTALL_Msk;
}
void USBD_IRQHandler(void)
{
uint32_t status = USBD->INTSTS;
uint32_t state = USBD->ATTR & 0xf;
if(status & USBD_INTSTS_FLDET_STS_Msk)
{
if(USBD->FLDET & USBD_FLDET_FLDET_Msk)
{
/* USB connect */
USBD->ATTR |= USBD_ATTR_USB_EN_Msk | USBD_ATTR_PHY_EN_Msk;
}
else
{
/* USB disconnect */
USBD->ATTR &= ~USBD_ATTR_USB_EN_Msk;
}
}
if(status & USBD_INTSTS_BUS_STS_Msk)
{
if(state & USBD_STATE_USBRST)
{
/* USB bus reset */
USBD->ATTR |= USBD_ATTR_USB_EN_Msk | USBD_ATTR_PHY_EN_Msk;
bus_reset();
dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
}
if(state & USBD_STATE_SUSPEND)
{
/* Enable USB but disable PHY */
USBD->ATTR &= ~USBD_ATTR_PHY_EN_Msk;
dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
}
if(state & USBD_STATE_RESUME)
{
/* Enable USB and enable PHY */
USBD->ATTR |= USBD_ATTR_USB_EN_Msk | USBD_ATTR_PHY_EN_Msk;
dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
}
}
if(status & USBD_INTSTS_SETUP_Msk)
{
/* clear the data ready flag of control endpoints */
USBD->EP[PERIPH_EP0].CFGP |= USBD_CFGP_CLRRDY_Msk;
USBD->EP[PERIPH_EP1].CFGP |= USBD_CFGP_CLRRDY_Msk;
/* get SETUP packet from USB buffer */
dcd_event_setup_received(0, (uint8_t *)USBD_BUF_BASE, true);
}
if(status & USBD_INTSTS_USB_STS_Msk)
{
if (status & (1UL << USBD_INTSTS_EPEVT_Pos)) /* PERIPH_EP0 (EP0_IN) event: this is treated separately from the rest */
{
/* given ACK from host has happened, we can now set the address (if not already done) */
if((USBD->FADDR != assigned_address) && (USBD->FADDR == 0)) USBD->FADDR = assigned_address;
uint16_t const available_bytes = USBD->EP[PERIPH_EP0].MXPLD;
active_ep0_xfer = (available_bytes == xfer_table[PERIPH_EP0].max_packet_size);
dcd_event_xfer_complete(0, 0x80, available_bytes, XFER_RESULT_SUCCESS, true);
}
/* service PERIPH_EP1 through PERIPH_EP7 */
enum ep_enum ep_index;
uint32_t mask;
struct xfer_ctl_t *xfer;
USBD_EP_T *ep;
for (ep_index = PERIPH_EP1, mask = (2UL << USBD_INTSTS_EPEVT_Pos), xfer = &xfer_table[PERIPH_EP1], ep = &USBD->EP[PERIPH_EP1]; ep_index < PERIPH_MAX_EP; ep_index++, mask <<= 1, xfer++, ep++)
{
if(status & mask)
{
USBD->INTSTS = mask;
uint16_t const available_bytes = ep->MXPLD;
uint8_t const ep_addr = decode_ep_addr(ep);
bool const out_ep = !(ep_addr & TUSB_DIR_IN_MASK);
if (out_ep)
{
/* copy the data from the PC to the previously provided buffer */
memcpy(xfer->data_ptr, (uint8_t *)(USBD_BUF_BASE + ep->BUFSEG), available_bytes);
xfer->out_bytes_so_far += available_bytes;
xfer->data_ptr += available_bytes;
/* when the transfer is finished, alert TinyUSB; otherwise, accept more data */
if ( (xfer->total_bytes == xfer->out_bytes_so_far) || (available_bytes < xfer->max_packet_size) )
dcd_event_xfer_complete(0, ep_addr, xfer->out_bytes_so_far, XFER_RESULT_SUCCESS, true);
else
ep->MXPLD = xfer->max_packet_size;
}
else
{
/* update the bookkeeping to reflect the data that has now been sent to the PC */
xfer->in_remaining_bytes -= available_bytes;
xfer->data_ptr += available_bytes;
/* if more data to send, send it; otherwise, alert TinyUSB that we've finished */
if (xfer->in_remaining_bytes)
dcd_in_xfer(xfer, ep);
else
dcd_event_xfer_complete(0, ep_addr, xfer->total_bytes, XFER_RESULT_SUCCESS, true);
}
}
}
}
/* acknowledge all interrupts */
USBD->INTSTS = status & enabled_irqs;
}
void dcd_isr(uint8_t rhport)
{
(void) rhport;
USBD_IRQHandler();
}
#endif

1
src/tusb_option.h
View File

@ -79,6 +79,7 @@
#define OPT_MCU_NUC121 800
#define OPT_MCU_NUC126 801
#define OPT_MCU_NUC120 802
/** @} */