ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
30c23719f6
Merge pull request #528 from jgressmann/port-atsame51-to-tinyusb
...
Adds files for the open source D5035-01 hardware
2020-10-08 13:46:41 +07:00
ed94e944c9
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-07 13:15:58 -05:00
3295b5692b
D5035-01 bsp: fix typo
2020-10-07 19:27:55 +02:00
f02b5bfdfa
Address various issues raised by TinyUSB maintainers
...
- remove OPT_MCU_SAME51 in favor of OPT_MCU_SAME5X and working around
differences in the Atmel bsp locally in the D5035-01 bsp.
- rename board folder to d5035_01 for consistency with other boards
2020-10-07 19:19:30 +02:00
d407341d1e
fix usb pin config with idf latest
2020-10-07 19:15:53 +07:00
f92fe1e23e
D5035-01: more natural Makefile variable use
2020-10-06 17:39:36 +02:00
1730a5dcba
D5035-01 bsp: fix paths, default to hw rev 1 (automated build)
2020-10-05 20:30:04 +02:00
61aacf07d6
Adds files for the open source D5035-01 hardware
...
The board's files are here:
https://github.com/RudolphRiedel/USB_CAN-FD
2020-10-05 18:35:35 +02:00
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
10d5dac913
update doc
2020-09-04 11:20:09 +07:00
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
c7d2d0ae29
ohci work, tested with lpc1769
2020-09-02 01:40:04 +07:00
52b5748e8d
fix ci build
2020-09-02 00:56:43 +07:00
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
f4e3c6fd8e
clean up
2020-09-01 17:12:31 +07:00
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
7a443d6bea
add itsybitsy nrf52840 board support
2020-08-27 16:40:24 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
91f7ce9769
add support for SAMD11 devices / add samd11_xplained board
2020-08-21 13:15:07 -06:00
76fe8ac612
fix samg55 ci build
2020-08-21 12:19:38 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
798fad397a
Merge pull request #464 from hathach/improve-highspeed
...
Better support highspeed mode
2020-07-19 13:24:57 +07:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
9181ce55fb
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-14 21:51:31 -06:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
0477446224
more clean up
2020-06-30 16:31:59 +07:00
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
2dff40236c
add kaluga files
2020-06-29 18:40:23 +07:00
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
8e143fc962
Add board support for Dialog DA1469x-dk-pro
...
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
0bfa839ac0
clean up, update other example config
2020-06-15 23:06:17 +07:00
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
e0490ae786
fix idf usb pin init changes
2020-05-29 13:06:33 +07:00
227bffe04b
adding h743 uart, but not enabled yet since it conflict with OTG_FS2
2020-05-27 01:14:52 +07:00
0482f0d686
update h743eval with rhport=1 highspeed
2020-05-26 22:15:00 +07:00
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
62a746bdc7
wip
2020-05-26 12:18:36 +07:00
ba9c774a2a
board test work fine
2020-05-23 13:29:30 +07:00
4c01099a3d
update makefile to build with ohci host
...
update ses project for lpc1769 with rtt
2020-05-22 20:57:52 +07:00
f308990ab5
Merge branch 'master' into update-host
2020-05-22 15:28:22 +07:00
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
3c43009278
Add support for stm32f746nucleo board
2020-05-15 10:23:01 +02:00
615369a6eb
stm32l476disco: Fix system clock setup
...
Code suggested that PLL with MSI is used resulting in 80MHz clock.
When in fact PLL was not configured and system clock was left at MSI 48MHz.
This happens because PLL configuration requires that SysTick interrupt
has interrupt priority level configured correctly.
As it seems ST code intentionally setups variable uwTickPrio to invalid
value and later when it is not setup by user code configuration
of oscillator will fail before PLL is configured.
This simple changes systick priority to some valid value that
allows clock to use PLL.
2020-05-06 15:13:55 +02:00
d9e534f6f2
stm32l476disco: fix uninitialized filed usage
...
Field PLLState was not initialized in RCC_OscInitStruct.PLL in
function SystemClock_Config().
Value is used in HAL_RCC_OscConfig() regardless of oscillator.
In lucky case value would be 0 RCC_PLL_NONE and nothing would
happen.
If value was incorrect following line would end up in assert:
assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
If value was valid but no RCC_PLL_NONE pll could be configured
with some other random values.
Setting PLLState to RCC_PLL_NONE eliminates potential problem.
2020-05-06 14:25:46 +02:00
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
4a3a448340
clean up things, add makefile for host example
2020-05-04 00:29:52 +07:00
9538ca7d74
add uart for mcb1800
2020-05-03 14:50:12 +07:00
94fed7db0e
fix esp32 ci adding FREERTOS STATIC to sdkconfig default
2020-04-29 11:31:04 +07:00
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
afc4042375
add LOGGER option to use rtt
...
update example readme for debug log. Update bug template to ask for LOG
as well.
2020-04-22 17:08:41 +07:00
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
989cca5b1a
update per review
2020-04-17 09:29:02 +07:00
bb2669fbc0
add dfu generate target for fomu
2020-04-16 22:24:48 +07:00
a009775745
dcd disconnect/connect for transdimension ip
2020-04-16 16:56:16 +07:00
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
d8d5902ccb
change saola-1 led to pin 18 by default
2020-04-10 15:44:50 +07:00
cefbd9579c
add neopixel led strip driver for saola, make saola as an component
2020-04-09 11:02:16 +07:00
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
fc9170b2c1
clean up
2020-04-08 15:15:52 +07:00
70df1aff13
add TODO for saola on-board neopixel
2020-04-08 15:00:16 +07:00
a2dee7fb50
rename saola to saola_1
2020-04-07 23:07:25 +07:00
6a9f971882
add saola button pin support, esp32 build with board_test
2020-04-07 13:42:48 +07:00
a344427e3f
fix CROSS_COMPILE for esp32s2
2020-04-06 20:39:20 +07:00
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
748cc88769
add saola board.mk
2020-04-03 12:20:06 +07:00
19f977a274
add esp32s2 saola bsp
...
update cdc_msc_freertos main.c to work with esp32s2
add CMake file
2020-04-01 20:24:46 +07:00
a582674b91
Merge pull request #312 from hathach/develop
...
house keeping work
2020-03-29 00:40:36 +07:00
3926b28faa
Update UARTs for stm32f4xx discovery boards. Other minor cleanups.
2020-03-28 12:05:30 -04:00
ad2824df8b
add ENTRY(Reset_Handler) to linker of samd21 and samd51 board
...
fix #303
2020-03-28 22:25:07 +07:00
4191363c55
Update F4 BSP with new HAL config
2020-03-28 10:58:36 -04:00
07c1ce76b8
Update F3 BSP for new HAL
2020-03-28 10:58:36 -04:00
62a68034d9
Update F0 BSP for new HAL
2020-03-28 10:58:36 -04:00
1712b61ab6
added Arduino Nano 33 BLE with/without Sense
2020-03-28 21:34:42 +07:00
69698ed2e0
Merge branch 'master' into develop
2020-03-28 15:31:39 +07:00
705d43cda7
Modify include of HAL, and remove CMSIS clock configuration code, and implement UART for STM32F407Disco
2020-03-26 10:10:06 -04:00
d74a92bf45
makefile clean up
...
allow board to define CROSS_COMPILE (default to arm gcc)
2020-03-25 14:06:51 +07:00
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
f2b761fee9
Merge pull request #306 from jeremyherbert/master
...
add support for seeeduino xiao
2020-03-24 14:37:38 +07:00
01820061b2
add support for seeeduino xiao
2020-03-23 23:39:53 -07:00
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
7e78e47444
msp_exp430f5529lp: Fix board.mk, remove .travis.yml.bck.
2020-03-24 00:40:25 -04:00
27efedc9e6
msp_exp430f5529lp: Allow user to choose mspdebug as alternate programmer.
2020-03-23 23:45:22 -04:00
905c4b71d1
nrf use new cmsis_4 submodule for core header
2020-03-24 08:51:11 +07:00
056d0bb4bf
remove -Wnested-externs since many driver does this including CMSIS_5
2020-03-23 22:52:59 +07:00
9e0ffbe30f
house keeping
2020-03-23 22:51:17 +07:00
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
acbb535668
change msp430 flash tool from mspdebug to TI MSP430Flasher
2020-03-22 19:11:24 +07:00
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
45e32a787b
clean up
2020-03-11 14:13:34 +07:00
5fa1e6e242
hack to undef LITTLE_ENDIAN for samg55
2020-03-11 12:32:29 +07:00
ba74223c2e
fix more build
2020-03-11 00:58:28 +07:00
6a1416d18a
fix cortex M7, M23, M33 freertos build
2020-03-11 00:47:13 +07:00
487b887f80
freertos demo use static only for most optmized sram
2020-03-11 00:09:37 +07:00
65578dec44
update freertos example
...
work with samd21 samd51 and nrf
2020-03-10 23:16:09 +07:00
41d9ab5056
Merge pull request #295 from hathach/develop
...
add webserver into ci build
2020-03-10 14:33:26 +07:00
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
85a3315a99
Adding lwip_webserver to ci
...
- buil_al.py skip specific MCU if .skip.MCU_ exists
- reduce stm32f070 heap & stack size to compile webserver
2020-03-09 15:51:29 +07:00
b638aabad8
add uart for feather nrf52840
2020-03-08 13:25:14 +07:00
659fc4f29e
added itsybitsy m0, m4
2020-03-07 18:26:39 +07:00
bdc5e3d3bc
added feather sense and CLUE
2020-03-07 18:02:54 +07:00
3ea95c2ab6
clean up LD_FILE using $(BOARD)
...
make it easier to duplicate bsp
2020-03-07 17:49:30 +07:00
800330cdf0
added feather nrf52840 sense
2020-03-07 17:27:59 +07:00
6ab799c7eb
atomic GPIO operation in BSP
2020-02-11 14:34:07 -06:00
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
a8e66f0111
added CFG_EXAMPLE_MSC_READONLY to NuTuny-SDK-NUC120 board.mk
2020-01-25 13:32:31 -06:00
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
0c1fff735d
skip nuc flash verify
2020-01-14 18:19:33 +07:00
4de9439fb1
more nuvoton support
...
- add LED for nutiny nuc 121, 125s, 126v
- flash target to use nuvoton's openocd fork
2020-01-14 18:13:42 +07:00
64b435cf6e
correct apparent Adafruit typo in SAMD21 board.mk
2020-01-11 18:25:38 -06:00
43eff66d40
add raytac mdbt50q rx dongle
2020-01-10 16:51:24 +07:00
82c2674b19
clean up
2020-01-10 15:22:45 +07:00
287d45155d
added stm32f401 blackpill
2020-01-10 15:19:33 +07:00
4494720dbc
clean up HSE_VALUE for stm32
2020-01-10 15:14:37 +07:00
04cf337b79
clean up flash-stlink
2020-01-10 15:09:59 +07:00
dd6313a6ca
added stm32f411 blackpill
2020-01-10 00:28:46 +07:00
84bbe54e17
follow up to #261
...
- fix button pullup
- flash using teensy_loader_cli
- update boards.md
2020-01-09 22:04:11 +07:00
8ead416865
add a rough bsp. UART on D0/D1, LED on D13, button on D12
2020-01-09 00:59:48 -05:00
8aef8d4b85
fix ci build
...
- nuc 121/125: add CFG_EXAMPLE_MSC_READONLY since it is not enough SRAM
to hold MSC disk
- nuc 126: drop i2c source files in compile list due to SDK driver
issue.
2020-01-07 16:57:18 +07:00
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
97c216bc04
Merge pull request #257 from gsnxp/rt1010fix
...
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2020-01-01 13:35:36 +07:00
e06f4a3ffe
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2019-12-30 09:11:52 -08:00
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
0b540fa55d
Merge pull request #234 from hathach/stm32f4-blackpill
...
move VBUS sense out of dcd_synosys to bsp
2019-12-12 10:00:17 +07:00
88bdb12ee5
close #204 define HSE_VALUE in _hal_conf instead of board.mk
2019-12-11 15:19:51 +07:00
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
4c9c13c767
add uart sync support
2019-11-26 18:21:46 +07:00
387384c0d9
fix samg55 with newlib missing end symbol
2019-11-26 17:39:51 +07:00
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
64b05a1d5f
Merge pull request #225 from xobs/fomu-offset-fix
...
bsp: fomu: fix rom address for example programs
2019-11-24 11:18:53 +07:00
a106c5114b
bsp: fomu: fix rom address for example programs
...
During development, the ROM address was at offset 0x2001a000
(due to the fact that the test program was located immediately
following the bitstream).
In normal Fomus, the ROM address is at offset 0x20040000, in order
to take into account additional bitstreams and bootloaders.
Correct the address to the offset in order to get examples working
with existing Fomus.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 01:15:31 +00:00
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
d1d8ded43b
added iMX RT1060 EVK board support
...
board_text, cdc_msc, hid_composite all work
2019-11-22 17:36:04 +07:00
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
636c1475ba
clean up
2019-11-22 12:38:24 +07:00
627d9a2b33
adding irq to rt1064evk
2019-11-22 00:34:31 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
54d597b723
rt1064evk led, button, uart all work
2019-11-20 17:10:30 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
679821e917
fomu: bsp: don't call usb isr when usb is disabled
...
When compiled without usb support, we don't want to call the USB ISR.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:10:37 -08:00
67267a9399
fomu: bsp: remove unused messible functions
...
These functions are unused in the current implementation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:08:56 -08:00
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
25d5628063
fomu: csr: sync csr
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
f087cb1580
fomu: crt0: minor text refactor
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
77cf0b5bfd
fomu: csr: add version with next_ev register
...
The Fomu bitstream now includes a `USB_NEXT_EV` register to
indicate which is the next logical event to process. Add this
register to the CSR definition.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
83bca4a74f
fomu: semi-working commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
ef07427e06
bsp: fomu: update
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:13 -08:00
ba889eeb9e
bsp: fomu: fix linker script overlap
...
The end of the data section was overlapping the start of the bss.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
f152bed4b4
fomu: initial commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
d65bc34bfe
added and tested nRF52833DK (pca10100)
2019-11-11 00:11:49 +07:00
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
a19db3bdd2
added board nrf52840 mdk dongle
2019-11-10 20:07:43 +07:00
943b7467d8
correct LED, button and uart for feather_stm32f405
2019-11-09 00:08:32 +07:00
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
8cd19f88b9
clean up
2019-11-04 22:03:31 +07:00
42b55f6621
clean up
2019-11-04 15:00:44 +07:00
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
68a53e05fc
Merge pull request #2 from hathach/pigrew-ZLP_Request2
...
zlp request2. PR for PR (has issues with STM32F0 FSDEV)
2019-11-03 17:50:41 -05:00
cebc066813
Add UART HAL source file to stm32f070 makefile.
2019-11-03 15:25:55 -05:00
5839159742
Enable UART debugging on F070.
2019-11-03 09:54:02 -05:00
585aebeb12
add uart support for stm32f072disco
2019-11-03 12:54:05 +07:00
ffeb61a710
msp_exp430f5529lp: Use ti submodule for includes and linker files.
2019-10-29 11:43:26 -04:00
6e204ca567
add --allow-fw-update for convenience
2019-10-29 17:36:53 +07:00
71a4076e73
correct read()/write() retarget for msp430, fix msp430 button state
2019-10-29 16:24:09 +07:00
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
78bf82291e
add uart support for stm32f4nucleo board (via stlink cdc)
2019-10-19 18:19:59 +07:00
2f3f23fd94
change to use nrfx uarte
2019-10-18 18:30:09 +07:00
558b4dbde3
change DEBUG optimization option from O0 to Og
...
add uart write to board test example
2019-10-18 17:50:29 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
97af9e3332
msp_exp430f5529lp: Make board_millis atomic.
2019-10-06 20:44:06 -04:00
16ff152129
msp_exp430f5529lp: Set up UART functionality.
2019-10-05 09:37:48 -04:00
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
13d37e4a36
lpcxpresso1549 board test running
2019-10-03 15:23:01 +07:00
7fd68efe7b
couldn't get 32L4 running with crystal less mode
2019-10-03 13:37:10 +07:00
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
0a20e91cc9
move linker file to blue pill bsp
2019-10-02 14:23:23 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
6479ee53d5
-Wno-error=cast-function-type is only available for gcc 8+, change travis dist to bionic
2019-10-01 15:43:28 +07:00
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
80b430fcfc
added stm32L0538 discovery board, board test exmaple works
2019-09-20 13:02:17 +07:00
49f2507b38
msp_exp430f5529lp: Implement enough functionality for board_test.
2019-09-19 01:21:29 -04:00
3440083bfd
added board feather stm32f045
2019-09-18 14:38:56 +07:00
772b0c17bf
rules.mk: Create an LDINC variable for linker script search path.
2019-09-14 21:16:10 -04:00
hathach