added DA14695 DK USB bsp
This commit is contained in:
hathach
parent
2f946e765d
commit
463e978134
|
|
@ -31,6 +31,7 @@ Special thanks to all the people who spent their precious time and effort to hel
|
|||
The stack supports the following MCUs:
|
||||
|
||||
- **Espressif:** ESP32-S2
|
||||
- **Dialog:** DA1469x
|
||||
- **MicroChip:** SAMD21, SAMD51, SAME5x (device only)
|
||||
- **NordicSemi:** nRF52833, nRF52840
|
||||
- **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505
|
||||
|
|
|
|||
|
|
@ -14,6 +14,11 @@ This code base already had supported for a handful of following boards (sorted a
|
|||
- [ESP32-S2-Kaluga-1](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/hw-reference/esp32s2/user-guide-esp32-s2-kaluga-1-kit.html)
|
||||
- [ESP32-S2-Saola-1](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/hw-reference/esp32s2/user-guide-saola-1-v1.2.html)
|
||||
|
||||
### Dialog DA146xx
|
||||
|
||||
- [DA14695 Development Kit – USB](https://www.dialog-semiconductor.com/products/da14695-development-kit-usb)
|
||||
- [DA1469x Development Kit – Pro](https://www.dialog-semiconductor.com/products/da14695-development-kit-pro)
|
||||
|
||||
### MicroChip SAMD
|
||||
|
||||
- [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,59 @@
|
|||
CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
-mthumb-interwork \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m33+nodsp \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv5-sp-d16 \
|
||||
-nostdlib \
|
||||
-DCORE_M33 \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_DA1469X \
|
||||
-DCFG_TUD_ENDPOINT0_SIZE=8\
|
||||
|
||||
MCU_FAMILY_DIR = hw/mcu/dialog/da1469x
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/da1469x.ld
|
||||
|
||||
SRC_C += \
|
||||
$(MCU_FAMILY_DIR)/src/system_da1469x.c \
|
||||
$(MCU_FAMILY_DIR)/src/da1469x_clock.c \
|
||||
$(MCU_FAMILY_DIR)/src/hal_gpio.c \
|
||||
|
||||
SRC_S += $(TOP)/hw/bsp/$(BOARD)/gcc_startup_da1469x.S
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/bsp/$(BOARD) \
|
||||
$(TOP)/$(MCU_FAMILY_DIR)/include \
|
||||
$(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include \
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = dialog
|
||||
# While this is for da1469x chip, there is chance that da1468x chip family will also work
|
||||
CHIP_FAMILY = da146xx
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM33_NTZ/non_secure
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = DA14695
|
||||
JLINK_IF = swd
|
||||
|
||||
# flash using jlink but with some twists
|
||||
flash: flash-dialog
|
||||
|
||||
flash-dialog: $(BUILD)/$(BOARD)-firmware.bin
|
||||
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
|
||||
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
|
||||
mkimage da1469x $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/version.h $^.img
|
||||
cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
|
||||
cat $^.img >> $(BUILD)/$(BOARD)-image.bin
|
||||
@echo r > $(BUILD)/$(BOARD).jlink
|
||||
@echo halt >> $(BUILD)/$(BOARD).jlink
|
||||
@echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink
|
||||
@echo r >> $(BUILD)/$(BOARD).jlink
|
||||
@echo go >> $(BUILD)/$(BOARD).jlink
|
||||
@echo exit >> $(BUILD)/$(BOARD).jlink
|
||||
$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
|
||||
|
||||
|
|
@ -0,0 +1,127 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020 Jerzy Kasenberg
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "bsp/board.h"
|
||||
#include <hal/hal_gpio.h>
|
||||
#include <mcu/mcu.h>
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
void USB_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO TYPEDEF CONSTANT ENUM
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
#define LED_PIN 33 // P1.1
|
||||
#define LED_STATE_ON 1
|
||||
#define LED_STATE_OFF (1-LED_STATE_ON)
|
||||
|
||||
#define BUTTON_PIN 6
|
||||
|
||||
void UnhandledIRQ(void)
|
||||
{
|
||||
CRG_TOP->SYS_CTRL_REG = 0x80;
|
||||
__BKPT(1);
|
||||
while(1);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
// LED
|
||||
hal_gpio_init_out(LED_PIN, LED_STATE_ON);
|
||||
|
||||
hal_gpio_init_out(1, 0);
|
||||
hal_gpio_init_out(2, 0);
|
||||
hal_gpio_init_out(3, 0);
|
||||
hal_gpio_init_out(4, 0);
|
||||
hal_gpio_init_out(5, 0);
|
||||
|
||||
// Button
|
||||
hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE);
|
||||
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
|
||||
NVIC_SetPriority(USB_IRQn, 2);
|
||||
|
||||
/* Setup USB IRQ */
|
||||
NVIC_SetPriority(USB_IRQn, 2);
|
||||
NVIC_EnableIRQ(USB_IRQn);
|
||||
|
||||
/* Use PLL96 / 2 clock not HCLK */
|
||||
CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk;
|
||||
|
||||
mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
|
||||
mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF);
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
// button is active LOW
|
||||
return hal_gpio_read(BUTTON_PIN) ^ 1;
|
||||
}
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void)buf;
|
||||
(void)len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
(void)buf;
|
||||
(void)len;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,245 @@
|
|||
/*
|
||||
* Licensed to the Apache Software Foundation (ASF) under one
|
||||
* or more contributor license agreements. See the NOTICE file
|
||||
* distributed with this work for additional information
|
||||
* regarding copyright ownership. The ASF licenses this file
|
||||
* to you under the Apache License, Version 2.0 (the
|
||||
* "License"); you may not use this file except in compliance
|
||||
* with the License. You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing,
|
||||
* software distributed under the License is distributed on an
|
||||
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||
* KIND, either express or implied. See the License for the
|
||||
* specific language governing permissions and limitations
|
||||
* under the License.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/*
|
||||
* Flash is remapped at 0x0 by 1st stage bootloader, but this is done with
|
||||
* an offset derived from image header thus it is safer to use remapped
|
||||
* address space at 0x0 instead of QSPI_M address space at 0x16000000.
|
||||
* Bootloader partition is 32K, but 9K is currently reserved for product
|
||||
* header (8K) and image header (1K).
|
||||
* First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector
|
||||
* (there's no need to reallocate ISR vector) and thus cannot be used by
|
||||
* application.
|
||||
*/
|
||||
|
||||
FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024)
|
||||
RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024)
|
||||
}
|
||||
|
||||
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __HeapBase
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
* __bssnz_start__
|
||||
* __bssnz_end__
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
__text = .;
|
||||
|
||||
.text :
|
||||
{
|
||||
__isr_vector_start = .;
|
||||
KEEP(*(.isr_vector))
|
||||
/* ISR vector shall have exactly 512 bytes */
|
||||
. = __isr_vector_start + 0x200;
|
||||
__isr_vector_end = .;
|
||||
|
||||
*(.text)
|
||||
*(.text.*)
|
||||
|
||||
*(.libcmac.rom)
|
||||
|
||||
KEEP(*(.init))
|
||||
KEEP(*(.fini))
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
*(.eh_frame*)
|
||||
. = ALIGN(4);
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
. = ALIGN(4);
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
.intvect :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__intvect_start__ = .;
|
||||
. = . + (__isr_vector_end - __isr_vector_start);
|
||||
. = ALIGN(4);
|
||||
} > RAM
|
||||
|
||||
.sleep_state (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(sleep_state)
|
||||
} > RAM
|
||||
|
||||
/* This section will be zeroed by RTT package init */
|
||||
.rtt (NOLOAD):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rtt)
|
||||
. = ALIGN(4);
|
||||
} > RAM
|
||||
|
||||
__text_ram_addr = LOADADDR(.text_ram);
|
||||
|
||||
.text_ram :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__text_ram_start__ = .;
|
||||
*(.text_ram*)
|
||||
. = ALIGN(4);
|
||||
__text_ram_end__ = .;
|
||||
} > RAM AT > FLASH
|
||||
|
||||
__etext = LOADADDR(.data);
|
||||
|
||||
.data :
|
||||
{
|
||||
__data_start__ = .;
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
*(.preinit_array)
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
*(SORT(.init_array.*))
|
||||
*(.init_array)
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
|
||||
. = ALIGN(4);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
*(SORT(.fini_array.*))
|
||||
*(.fini_array)
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
*(.jcr)
|
||||
. = ALIGN(4);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
} > RAM AT > FLASH
|
||||
|
||||
.bssnz :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bssnz_start__ = .;
|
||||
*(.bss.core.nz*)
|
||||
. = ALIGN(4);
|
||||
__bssnz_end__ = .;
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bss_start__ = .;
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
} > RAM
|
||||
|
||||
.cmac (NOLOAD) :
|
||||
{
|
||||
. = ALIGN(0x400);
|
||||
*(.libcmac.ram)
|
||||
} > RAM
|
||||
|
||||
/* Heap starts after BSS */
|
||||
. = ALIGN(8);
|
||||
__HeapBase = .;
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
} > RAM
|
||||
|
||||
_ram_start = ORIGIN(RAM);
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Top of head is the bottom of the stack */
|
||||
__HeapLimit = __StackLimit;
|
||||
end = __HeapLimit;
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack")
|
||||
|
||||
/* Check that intvect is at the beginning of RAM */
|
||||
ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM")
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,301 @@
|
|||
/*
|
||||
* Licensed to the Apache Software Foundation (ASF) under one
|
||||
* or more contributor license agreements. See the NOTICE file
|
||||
* distributed with this work for additional information
|
||||
* regarding copyright ownership. The ASF licenses this file
|
||||
* to you under the Apache License, Version 2.0 (the
|
||||
* "License"); you may not use this file except in compliance
|
||||
* with the License. You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing,
|
||||
* software distributed under the License is distributed on an
|
||||
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||
* KIND, either express or implied. See the License for the
|
||||
* specific language governing permissions and limitations
|
||||
* under the License.
|
||||
*/
|
||||
|
||||
#include "syscfg/syscfg.h"
|
||||
|
||||
.syntax unified
|
||||
.arch armv7-m
|
||||
|
||||
.section .stack
|
||||
.align 3
|
||||
#ifdef __STACK_SIZE
|
||||
.equ Stack_Size, __STACK_SIZE
|
||||
#else
|
||||
.equ Stack_Size, 0xC00
|
||||
#endif
|
||||
.equ SYS_CTRL_REG, 0x50000024
|
||||
.equ CACHE_FLASH_REG, 0x100C0040
|
||||
.equ RESET_STAT_REG, 0x500000BC
|
||||
|
||||
.globl __StackTop
|
||||
.globl __StackLimit
|
||||
__StackLimit:
|
||||
.space Stack_Size
|
||||
.size __StackLimit, . - __StackLimit
|
||||
__StackTop:
|
||||
.size __StackTop, . - __StackTop
|
||||
|
||||
.section .heap
|
||||
.align 3
|
||||
#ifdef __HEAP_SIZE
|
||||
.equ Heap_Size, __HEAP_SIZE
|
||||
#else
|
||||
.equ Heap_Size, 0
|
||||
#endif
|
||||
.globl __HeapBase
|
||||
.globl __HeapLimit
|
||||
__HeapBase:
|
||||
.if Heap_Size
|
||||
.space Heap_Size
|
||||
.endif
|
||||
.size __HeapBase, . - __HeapBase
|
||||
__HeapLimit:
|
||||
.size __HeapLimit, . - __HeapLimit
|
||||
|
||||
.section .isr_vector
|
||||
.align 2
|
||||
.globl __isr_vector
|
||||
__isr_vector:
|
||||
.long __StackTop
|
||||
.long Reset_Handler
|
||||
/* Cortex-M33 interrupts */
|
||||
.long NMI_Handler
|
||||
.long HardFault_Handler
|
||||
.long MemoryManagement_Handler
|
||||
.long BusFault_Handler
|
||||
.long UsageFault_Handler
|
||||
.long SecureFault_Handler
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long SVC_Handler
|
||||
.long DebugMonitor_Handler
|
||||
.long 0 /* Reserved */
|
||||
.long PendSV_Handler
|
||||
.long SysTick_Handler
|
||||
/* DA1469x interrupts */
|
||||
.long SENSOR_NODE_IRQHandler
|
||||
.long DMA_IRQHandler
|
||||
.long CHARGER_STATE_IRQHandler
|
||||
.long CHARGER_ERROR_IRQHandler
|
||||
.long CMAC2SYS_IRQHandler
|
||||
.long UART_IRQHandler
|
||||
.long UART2_IRQHandler
|
||||
.long UART3_IRQHandler
|
||||
.long I2C_IRQHandler
|
||||
.long I2C2_IRQHandler
|
||||
.long SPI_IRQHandler
|
||||
.long SPI2_IRQHandler
|
||||
.long PCM_IRQHandler
|
||||
.long SRC_IN_IRQHandler
|
||||
.long SRC_OUT_IRQHandler
|
||||
.long USB_IRQHandler
|
||||
.long TIMER_IRQHandler
|
||||
.long TIMER2_IRQHandler
|
||||
.long RTC_IRQHandler
|
||||
.long KEY_WKUP_GPIO_IRQHandler
|
||||
.long PDC_IRQHandler
|
||||
.long VBUS_IRQHandler
|
||||
.long MRM_IRQHandler
|
||||
.long MOTOR_CONTROLLER_IRQHandler
|
||||
.long TRNG_IRQHandler
|
||||
.long DCDC_IRQHandler
|
||||
.long XTAL32M_RDY_IRQHandler
|
||||
.long ADC_IRQHandler
|
||||
.long ADC2_IRQHandler
|
||||
.long CRYPTO_IRQHandler
|
||||
.long CAPTIMER1_IRQHandler
|
||||
.long RFDIAG_IRQHandler
|
||||
.long LCD_CONTROLLER_IRQHandler
|
||||
.long PLL_LOCK_IRQHandler
|
||||
.long TIMER3_IRQHandler
|
||||
.long TIMER4_IRQHandler
|
||||
.long LRA_IRQHandler
|
||||
.long RTC_EVENT_IRQHandler
|
||||
.long GPIO_P0_IRQHandler
|
||||
.long GPIO_P1_IRQHandler
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.long 0 /* Reserved */
|
||||
.size __isr_vector, . - __isr_vector
|
||||
|
||||
.text
|
||||
.thumb
|
||||
.thumb_func
|
||||
.align 2
|
||||
.globl Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
/* Make sure interrupt vector is remapped at 0x0 */
|
||||
ldr r1, =SYS_CTRL_REG
|
||||
ldrh r2, [r1, #0]
|
||||
orrs r2, r2, #8
|
||||
strh r2, [r1, #0]
|
||||
|
||||
#if !MYNEWT_VAL(RAM_RESIDENT)
|
||||
/*
|
||||
* Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to
|
||||
* 0x16000000 but to start of an image on flash. This is calculated from product
|
||||
* header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to
|
||||
* retrieve proper offset value for calculations later.
|
||||
*/
|
||||
ldr r1, =CACHE_FLASH_REG
|
||||
ldr r4, [r1, #0]
|
||||
mov r2, r4
|
||||
mov r3, #0xFFFF
|
||||
bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */
|
||||
mov r3, #0xFFF0
|
||||
and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */
|
||||
lsr r2, r2, #2
|
||||
orr r4, r4, r2
|
||||
|
||||
/* Copy ISR vector from flash to RAM */
|
||||
ldr r1, =__isr_vector_start /* src ptr */
|
||||
ldr r2, =__isr_vector_end /* src end */
|
||||
ldr r3, =__intvect_start__ /* dst ptr */
|
||||
/* Make sure we copy from QSPIC address range, not from remapped range */
|
||||
cmp r1, r4
|
||||
itt lt
|
||||
addlt r1, r1, r4
|
||||
addlt r2, r2, r4
|
||||
.loop_isr_copy:
|
||||
cmp r1, r2
|
||||
ittt lt
|
||||
ldrlt r0, [r1], #4
|
||||
strlt r0, [r3], #4
|
||||
blt .loop_isr_copy
|
||||
|
||||
/* Copy QSPI code from flash to RAM */
|
||||
ldr r1, =__text_ram_addr /* src ptr */
|
||||
ldr r2, =__text_ram_start__ /* ptr */
|
||||
ldr r3, =__text_ram_end__ /* dst end */
|
||||
.loop_code_text_ram_copy:
|
||||
cmp r2, r3
|
||||
ittt lt
|
||||
ldrlt r0, [r1], #4
|
||||
strlt r0, [r2], #4
|
||||
blt .loop_code_text_ram_copy
|
||||
|
||||
/* Copy data from flash to RAM */
|
||||
ldr r1, =__etext /* src ptr */
|
||||
ldr r2, =__data_start__ /* dst ptr */
|
||||
ldr r3, =__data_end__ /* dst end */
|
||||
.loop_data_copy:
|
||||
cmp r2, r3
|
||||
ittt lt
|
||||
ldrlt r0, [r1], #4
|
||||
strlt r0, [r2], #4
|
||||
blt .loop_data_copy
|
||||
#endif
|
||||
|
||||
/* Clear BSS */
|
||||
movs r0, 0
|
||||
ldr r1, =__bss_start__
|
||||
ldr r2, =__bss_end__
|
||||
.loop_bss_clear:
|
||||
cmp r1, r2
|
||||
itt lt
|
||||
strlt r0, [r1], #4
|
||||
blt .loop_bss_clear
|
||||
|
||||
ldr r0, =__HeapBase
|
||||
ldr r1, =__HeapLimit
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
|
||||
bl SystemInit
|
||||
bl main
|
||||
|
||||
.pool
|
||||
.size Reset_Handler, . - Reset_Handler
|
||||
|
||||
/* Default interrupt handler */
|
||||
.type Default_Handler, %function
|
||||
Default_Handler:
|
||||
ldr r1, =SYS_CTRL_REG
|
||||
ldrh r2, [r1, #0]
|
||||
orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */
|
||||
strh r2, [r1, #0]
|
||||
b .
|
||||
|
||||
.size Default_Handler, . - Default_Handler
|
||||
|
||||
/* Default handlers for all interrupts */
|
||||
.macro IRQ handler
|
||||
.weak \handler
|
||||
.set \handler, Default_Handler
|
||||
.endm
|
||||
|
||||
/* Cortex-M33 interrupts */
|
||||
IRQ NMI_Handler
|
||||
IRQ HardFault_Handler
|
||||
IRQ MemoryManagement_Handler
|
||||
IRQ BusFault_Handler
|
||||
IRQ UsageFault_Handler
|
||||
IRQ SecureFault_Handler
|
||||
IRQ SVC_Handler
|
||||
IRQ DebugMonitor_Handler
|
||||
IRQ PendSV_Handler
|
||||
IRQ SysTick_Handler
|
||||
/* DA1469x interrupts */
|
||||
IRQ SENSOR_NODE_IRQHandler
|
||||
IRQ DMA_IRQHandler
|
||||
IRQ CHARGER_STATE_IRQHandler
|
||||
IRQ CHARGER_ERROR_IRQHandler
|
||||
IRQ CMAC2SYS_IRQHandler
|
||||
IRQ UART_IRQHandler
|
||||
IRQ UART2_IRQHandler
|
||||
IRQ UART3_IRQHandler
|
||||
IRQ I2C_IRQHandler
|
||||
IRQ I2C2_IRQHandler
|
||||
IRQ SPI_IRQHandler
|
||||
IRQ SPI2_IRQHandler
|
||||
IRQ PCM_IRQHandler
|
||||
IRQ SRC_IN_IRQHandler
|
||||
IRQ SRC_OUT_IRQHandler
|
||||
IRQ USB_IRQHandler
|
||||
IRQ TIMER_IRQHandler
|
||||
IRQ TIMER2_IRQHandler
|
||||
IRQ RTC_IRQHandler
|
||||
IRQ KEY_WKUP_GPIO_IRQHandler
|
||||
IRQ PDC_IRQHandler
|
||||
IRQ VBUS_IRQHandler
|
||||
IRQ MRM_IRQHandler
|
||||
IRQ MOTOR_CONTROLLER_IRQHandler
|
||||
IRQ TRNG_IRQHandler
|
||||
IRQ DCDC_IRQHandler
|
||||
IRQ XTAL32M_RDY_IRQHandler
|
||||
IRQ ADC_IRQHandler
|
||||
IRQ ADC2_IRQHandler
|
||||
IRQ CRYPTO_IRQHandler
|
||||
IRQ CAPTIMER1_IRQHandler
|
||||
IRQ RFDIAG_IRQHandler
|
||||
IRQ LCD_CONTROLLER_IRQHandler
|
||||
IRQ PLL_LOCK_IRQHandler
|
||||
IRQ TIMER3_IRQHandler
|
||||
IRQ TIMER4_IRQHandler
|
||||
IRQ LRA_IRQHandler
|
||||
IRQ RTC_EVENT_IRQHandler
|
||||
IRQ GPIO_P0_IRQHandler
|
||||
IRQ GPIO_P1_IRQHandler
|
||||
IRQ RESERVED40_IRQHandler
|
||||
IRQ RESERVED41_IRQHandler
|
||||
IRQ RESERVED42_IRQHandler
|
||||
IRQ RESERVED43_IRQHandler
|
||||
IRQ RESERVED44_IRQHandler
|
||||
IRQ RESERVED45_IRQHandler
|
||||
IRQ RESERVED46_IRQHandler
|
||||
IRQ RESERVED47_IRQHandler
|
||||
|
||||
.end
|
||||
Binary file not shown.
|
|
@ -0,0 +1,34 @@
|
|||
/**
|
||||
* This file was generated by Apache newt version: 1.9.0-dev
|
||||
*/
|
||||
|
||||
#ifndef H_MYNEWT_SYSCFG_
|
||||
#define H_MYNEWT_SYSCFG_
|
||||
|
||||
/**
|
||||
* This macro exists to ensure code includes this header when needed. If code
|
||||
* checks the existence of a setting directly via ifdef without including this
|
||||
* header, the setting macro will silently evaluate to 0. In contrast, an
|
||||
* attempt to use these macros without including this header will result in a
|
||||
* compiler error.
|
||||
*/
|
||||
#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name
|
||||
#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val
|
||||
|
||||
#ifndef MYNEWT_VAL_RAM_RESIDENT
|
||||
#define MYNEWT_VAL_RAM_RESIDENT (0)
|
||||
#endif
|
||||
|
||||
#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ
|
||||
#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4)
|
||||
#endif
|
||||
|
||||
#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM
|
||||
#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1)
|
||||
#endif
|
||||
|
||||
#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US
|
||||
#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000)
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -11,11 +11,7 @@
|
|||
-DCFG_TUSB_MCU=OPT_MCU_DA1469X \
|
||||
-DCFG_TUD_ENDPOINT0_SIZE=8\
|
||||
|
||||
# mcu driver cause following warnings
|
||||
# CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter
|
||||
|
||||
MCU_FAMILY_DIR = hw/mcu/dialog/da1469x
|
||||
MCU_DIR = hw/mcu/dialog/da14699
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/da1469x.ld
|
||||
|
|
@ -28,8 +24,7 @@ SRC_C += \
|
|||
SRC_S += $(TOP)/hw/bsp/$(BOARD)/gcc_startup_da1469x.S
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/bsp/$(BOARD) \
|
||||
$(TOP)/$(MCU_DIR)/include \
|
||||
$(TOP)/hw/bsp/$(BOARD) \
|
||||
$(TOP)/$(MCU_FAMILY_DIR)/include \
|
||||
$(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include \
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue