kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

Add board support for Dialog DA1469x-dk-pro 

This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
This commit is contained in:
Jerzy Kasenberg 2020-06-19 14:02:09 +02:00
parent 0635bafe0a
commit 8e143fc962
17 changed files with 2553 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
hw/bsp/board_mcu.h
View File

@ -113,6 +113,9 @@
#elif CFG_TUSB_MCU == OPT_MCU_ESP32S2
// no header needed
#elif CFG_TUSB_MCU == OPT_MCU_DA1469X
#include "DA1469xAB.h"
#else
#error "Missing MCU header"
#endif

64
hw/bsp/da1469x_dk_pro/board.mk Normal file
View File

@ -0,0 +1,64 @@
CFLAGS += \
-flto \
-mthumb \
-mthumb-interwork \
-mabi=aapcs \
-mcpu=cortex-m33+nodsp \
-mfloat-abi=hard \
-mfpu=fpv5-sp-d16 \
-nostdlib \
-DCORE_M33 \
-DCFG_TUSB_MCU=OPT_MCU_DA1469X \
-DCFG_TUD_ENDPOINT0_SIZE=8\
# mcu driver cause following warnings
# CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter
MCU_FAMILY_DIR = hw/mcu/dialog/da1469x
MCU_DIR = hw/mcu/dialog/da14699
# All source paths should be relative to the top level.
LD_FILE = hw/bsp/$(BOARD)/da1469x.ld
SRC_C += \
$(MCU_FAMILY_DIR)/src/system_da1469x.c \
$(MCU_FAMILY_DIR)/src/da1469x_clock.c \
$(MCU_FAMILY_DIR)/src/hal_gpio.c \
SRC_S += $(TOP)/hw/bsp/$(BOARD)/gcc_startup_da1469x.S
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/include \
$(TOP)/$(MCU_FAMILY_DIR)/include \
$(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include \
# For TinyUSB port source
VENDOR = dialog
# While this is for da1469x chip, there is chance that da1468x chip family will also work
CHIP_FAMILY = da146xx
# For freeRTOS port source
FREERTOS_PORT = ARM_CM33_NTZ/non_secure
# For flash-jlink target
JLINK_DEVICE = DA14699
JLINK_IF = swd
# flash using jlink but with some twists
flash: flash-dialog
flash-dialog: $(BUILD)/$(BOARD)-firmware.bin
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
mkimage da1469x $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/version.h $^.img
cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
cat $^.img >> $(BUILD)/$(BOARD)-image.bin
@echo r > $(BUILD)/$(BOARD).jlink
@echo halt >> $(BUILD)/$(BOARD).jlink
@echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink
@echo r >> $(BUILD)/$(BOARD).jlink
@echo go >> $(BUILD)/$(BOARD).jlink
@echo exit >> $(BUILD)/$(BOARD).jlink
$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink

245
hw/bsp/da1469x_dk_pro/da1469x.ld Normal file
View File

@ -0,0 +1,245 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
MEMORY
{
/*
* Flash is remapped at 0x0 by 1st stage bootloader, but this is done with
* an offset derived from image header thus it is safer to use remapped
* address space at 0x0 instead of QSPI_M address space at 0x16000000.
* Bootloader partition is 32K, but 9K is currently reserved for product
* header (8K) and image header (1K).
* First 512 bytes of SYSRAM are remapped at 0x0 and used as ISR vector
* (there's no need to reallocate ISR vector) and thus cannot be used by
* application.
*/
FLASH (r) : ORIGIN = (0x00000000), LENGTH = (1024 * 1024)
RAM (rw) : ORIGIN = (0x20000000), LENGTH = (512 * 1024)
}
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __HeapBase
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* __bssnz_start__
* __bssnz_end__
*/
ENTRY(Reset_Handler)
SECTIONS
{
__text = .;
.text :
{
__isr_vector_start = .;
KEEP(*(.isr_vector))
/* ISR vector shall have exactly 512 bytes */
. = __isr_vector_start + 0x200;
__isr_vector_end = .;
*(.text)
*(.text.*)
*(.libcmac.rom)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
*(.eh_frame*)
. = ALIGN(4);
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(4);
} > FLASH
__exidx_start = .;
.ARM :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
. = ALIGN(4);
} > FLASH
__exidx_end = .;
.intvect :
{
. = ALIGN(4);
__intvect_start__ = .;
. = . + (__isr_vector_end - __isr_vector_start);
. = ALIGN(4);
} > RAM
.sleep_state (NOLOAD) :
{
. = ALIGN(4);
*(sleep_state)
} > RAM
/* This section will be zeroed by RTT package init */
.rtt (NOLOAD):
{
. = ALIGN(4);
*(.rtt)
. = ALIGN(4);
} > RAM
__text_ram_addr = LOADADDR(.text_ram);
.text_ram :
{
. = ALIGN(4);
__text_ram_start__ = .;
*(.text_ram*)
. = ALIGN(4);
__text_ram_end__ = .;
} > RAM AT > FLASH
__etext = LOADADDR(.data);
.data :
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
*(.preinit_array)
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
*(SORT(.init_array.*))
*(.init_array)
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
*(SORT(.fini_array.*))
*(.fini_array)
PROVIDE_HIDDEN (__fini_array_end = .);
*(.jcr)
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM AT > FLASH
.bssnz :
{
. = ALIGN(4);
__bssnz_start__ = .;
*(.bss.core.nz*)
. = ALIGN(4);
__bssnz_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.cmac (NOLOAD) :
{
. = ALIGN(0x400);
*(.libcmac.ram)
} > RAM
/* Heap starts after BSS */
. = ALIGN(8);
__HeapBase = .;
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM
_ram_start = ORIGIN(RAM);
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Top of head is the bottom of the stack */
__HeapLimit = __StackLimit;
end = __HeapLimit;
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack")
/* Check that intvect is at the beginning of RAM */
ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM")
}

127
hw/bsp/da1469x_dk_pro/dialog_da1469x-dk-pro.c Normal file
View File

@ -0,0 +1,127 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020 Jerzy Kasenberg
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "bsp/board.h"
#include <hal/hal_gpio.h>
#include <mcu/mcu.h>
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_IRQHandler(void)
{
tud_int_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PIN 33
#define LED_STATE_ON 1
#define LED_STATE_OFF 0
#define BUTTON_PIN 6
void UnhandledIRQ(void)
{
CRG_TOP->SYS_CTRL_REG = 0x80;
__BKPT(1);
while(1);
}
void board_init(void)
{
// LED
hal_gpio_init_out(LED_PIN, LED_STATE_ON);
hal_gpio_init_out(1, 0);
hal_gpio_init_out(2, 0);
hal_gpio_init_out(3, 0);
hal_gpio_init_out(4, 0);
hal_gpio_init_out(5, 0);
// Button
hal_gpio_init_in(BUTTON_PIN, HAL_GPIO_PULL_NONE);
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
NVIC_SetPriority(USB_IRQn, 2);
/* Setup USB IRQ */
NVIC_SetPriority(USB_IRQn, 2);
NVIC_EnableIRQ(USB_IRQn);
/* Use PLL96 / 2 clock not HCLK */
CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_USB_CLK_SRC_Msk;
mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
hal_gpio_write(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF);
}
uint32_t board_button_read(void)
{
// button is active LOW
return hal_gpio_read(BUTTON_PIN) ^ 1;
}
int board_uart_read(uint8_t* buf, int len)
{
(void)buf;
(void)len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
(void)buf;
(void)len;
return 0;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

301
hw/bsp/da1469x_dk_pro/gcc_startup_da1469x.S Normal file
View File

@ -0,0 +1,301 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include "syscfg/syscfg.h"
.syntax unified
.arch armv7-m
.section .stack
.align 3
#ifdef __STACK_SIZE
.equ Stack_Size, __STACK_SIZE
#else
.equ Stack_Size, 0xC00
#endif
.equ SYS_CTRL_REG, 0x50000024
.equ CACHE_FLASH_REG, 0x100C0040
.equ RESET_STAT_REG, 0x500000BC
.globl __StackTop
.globl __StackLimit
__StackLimit:
.space Stack_Size
.size __StackLimit, . - __StackLimit
__StackTop:
.size __StackTop, . - __StackTop
.section .heap
.align 3
#ifdef __HEAP_SIZE
.equ Heap_Size, __HEAP_SIZE
#else
.equ Heap_Size, 0
#endif
.globl __HeapBase
.globl __HeapLimit
__HeapBase:
.if Heap_Size
.space Heap_Size
.endif
.size __HeapBase, . - __HeapBase
__HeapLimit:
.size __HeapLimit, . - __HeapLimit
.section .isr_vector
.align 2
.globl __isr_vector
__isr_vector:
.long __StackTop
.long Reset_Handler
/* Cortex-M33 interrupts */
.long NMI_Handler
.long HardFault_Handler
.long MemoryManagement_Handler
.long BusFault_Handler
.long UsageFault_Handler
.long SecureFault_Handler
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long SVC_Handler
.long DebugMonitor_Handler
.long 0 /* Reserved */
.long PendSV_Handler
.long SysTick_Handler
/* DA1469x interrupts */
.long SENSOR_NODE_IRQHandler
.long DMA_IRQHandler
.long CHARGER_STATE_IRQHandler
.long CHARGER_ERROR_IRQHandler
.long CMAC2SYS_IRQHandler
.long UART_IRQHandler
.long UART2_IRQHandler
.long UART3_IRQHandler
.long I2C_IRQHandler
.long I2C2_IRQHandler
.long SPI_IRQHandler
.long SPI2_IRQHandler
.long PCM_IRQHandler
.long SRC_IN_IRQHandler
.long SRC_OUT_IRQHandler
.long USB_IRQHandler
.long TIMER_IRQHandler
.long TIMER2_IRQHandler
.long RTC_IRQHandler
.long KEY_WKUP_GPIO_IRQHandler
.long PDC_IRQHandler
.long VBUS_IRQHandler
.long MRM_IRQHandler
.long MOTOR_CONTROLLER_IRQHandler
.long TRNG_IRQHandler
.long DCDC_IRQHandler
.long XTAL32M_RDY_IRQHandler
.long ADC_IRQHandler
.long ADC2_IRQHandler
.long CRYPTO_IRQHandler
.long CAPTIMER1_IRQHandler
.long RFDIAG_IRQHandler
.long LCD_CONTROLLER_IRQHandler
.long PLL_LOCK_IRQHandler
.long TIMER3_IRQHandler
.long TIMER4_IRQHandler
.long LRA_IRQHandler
.long RTC_EVENT_IRQHandler
.long GPIO_P0_IRQHandler
.long GPIO_P1_IRQHandler
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.size __isr_vector, . - __isr_vector
.text
.thumb
.thumb_func
.align 2
.globl Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Make sure interrupt vector is remapped at 0x0 */
ldr r1, =SYS_CTRL_REG
ldrh r2, [r1, #0]
orrs r2, r2, #8
strh r2, [r1, #0]
#if !MYNEWT_VAL(RAM_RESIDENT)
/*
* Flash is remapped at 0x0 with an offset, i.e. 0x0 does not correspond to
* 0x16000000 but to start of an image on flash. This is calculated from product
* header by 1st state bootloader and configured in CACHE_FLASH_REG. We need to
* retrieve proper offset value for calculations later.
*/
ldr r1, =CACHE_FLASH_REG
ldr r4, [r1, #0]
mov r2, r4
mov r3, #0xFFFF
bic r4, r4, r3 /* CACHE_FLASH_REG[FLASH_REGION_BASE] */
mov r3, #0xFFF0
and r2, r2, r3 /* CACHE_FLASH_REG[FLASH_REGION_OFFSET] */
lsr r2, r2, #2
orr r4, r4, r2
/* Copy ISR vector from flash to RAM */
ldr r1, =__isr_vector_start /* src ptr */
ldr r2, =__isr_vector_end /* src end */
ldr r3, =__intvect_start__ /* dst ptr */
/* Make sure we copy from QSPIC address range, not from remapped range */
cmp r1, r4
itt lt
addlt r1, r1, r4
addlt r2, r2, r4
.loop_isr_copy:
cmp r1, r2
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r3], #4
blt .loop_isr_copy
/* Copy QSPI code from flash to RAM */
ldr r1, =__text_ram_addr /* src ptr */
ldr r2, =__text_ram_start__ /* ptr */
ldr r3, =__text_ram_end__ /* dst end */
.loop_code_text_ram_copy:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .loop_code_text_ram_copy
/* Copy data from flash to RAM */
ldr r1, =__etext /* src ptr */
ldr r2, =__data_start__ /* dst ptr */
ldr r3, =__data_end__ /* dst end */
.loop_data_copy:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .loop_data_copy
#endif
/* Clear BSS */
movs r0, 0
ldr r1, =__bss_start__
ldr r2, =__bss_end__
.loop_bss_clear:
cmp r1, r2
itt lt
strlt r0, [r1], #4
blt .loop_bss_clear
ldr r0, =__HeapBase
ldr r1, =__HeapLimit
/* Call static constructors */
bl __libc_init_array
bl SystemInit
bl main
.pool
.size Reset_Handler, . - Reset_Handler
/* Default interrupt handler */
.type Default_Handler, %function
Default_Handler:
ldr r1, =SYS_CTRL_REG
ldrh r2, [r1, #0]
orrs r2, r2, #0x80 /* DEBUGGER_ENABLE */
strh r2, [r1, #0]
b .
.size Default_Handler, . - Default_Handler
/* Default handlers for all interrupts */
.macro IRQ handler
.weak \handler
.set \handler, Default_Handler
.endm
/* Cortex-M33 interrupts */
IRQ NMI_Handler
IRQ HardFault_Handler
IRQ MemoryManagement_Handler
IRQ BusFault_Handler
IRQ UsageFault_Handler
IRQ SecureFault_Handler
IRQ SVC_Handler
IRQ DebugMonitor_Handler
IRQ PendSV_Handler
IRQ SysTick_Handler
/* DA1469x interrupts */
IRQ SENSOR_NODE_IRQHandler
IRQ DMA_IRQHandler
IRQ CHARGER_STATE_IRQHandler
IRQ CHARGER_ERROR_IRQHandler
IRQ CMAC2SYS_IRQHandler
IRQ UART_IRQHandler
IRQ UART2_IRQHandler
IRQ UART3_IRQHandler
IRQ I2C_IRQHandler
IRQ I2C2_IRQHandler
IRQ SPI_IRQHandler
IRQ SPI2_IRQHandler
IRQ PCM_IRQHandler
IRQ SRC_IN_IRQHandler
IRQ SRC_OUT_IRQHandler
IRQ USB_IRQHandler
IRQ TIMER_IRQHandler
IRQ TIMER2_IRQHandler
IRQ RTC_IRQHandler
IRQ KEY_WKUP_GPIO_IRQHandler
IRQ PDC_IRQHandler
IRQ VBUS_IRQHandler
IRQ MRM_IRQHandler
IRQ MOTOR_CONTROLLER_IRQHandler
IRQ TRNG_IRQHandler
IRQ DCDC_IRQHandler
IRQ XTAL32M_RDY_IRQHandler
IRQ ADC_IRQHandler
IRQ ADC2_IRQHandler
IRQ CRYPTO_IRQHandler
IRQ CAPTIMER1_IRQHandler
IRQ RFDIAG_IRQHandler
IRQ LCD_CONTROLLER_IRQHandler
IRQ PLL_LOCK_IRQHandler
IRQ TIMER3_IRQHandler
IRQ TIMER4_IRQHandler
IRQ LRA_IRQHandler
IRQ RTC_EVENT_IRQHandler
IRQ GPIO_P0_IRQHandler
IRQ GPIO_P1_IRQHandler
IRQ RESERVED40_IRQHandler
IRQ RESERVED41_IRQHandler
IRQ RESERVED42_IRQHandler
IRQ RESERVED43_IRQHandler
IRQ RESERVED44_IRQHandler
IRQ RESERVED45_IRQHandler
IRQ RESERVED46_IRQHandler
IRQ RESERVED47_IRQHandler
.end

BIN
hw/bsp/da1469x_dk_pro/product_header.dump Normal file
View File

Binary file not shown.

34
hw/bsp/da1469x_dk_pro/syscfg/syscfg.h Normal file
View File

@ -0,0 +1,34 @@
/**
* This file was generated by Apache newt version: 1.9.0-dev
*/
#ifndef H_MYNEWT_SYSCFG_
#define H_MYNEWT_SYSCFG_
/**
* This macro exists to ensure code includes this header when needed. If code
* checks the existence of a setting directly via ifdef without including this
* header, the setting macro will silently evaluate to 0. In contrast, an
* attempt to use these macros without including this header will result in a
* compiler error.
*/
#define MYNEWT_VAL(_name) MYNEWT_VAL_ ## _name
#define MYNEWT_VAL_CHOICE(_name, _val) MYNEWT_VAL_ ## _name ## __ ## _val
#ifndef MYNEWT_VAL_RAM_RESIDENT
#define MYNEWT_VAL_RAM_RESIDENT (0)
#endif
#ifndef MYNEWT_VAL_MCU_GPIO_MAX_IRQ
#define MYNEWT_VAL_MCU_GPIO_MAX_IRQ (4)
#endif
#ifndef MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM
#define MYNEWT_VAL_MCU_GPIO_RETAINABLE_NUM (-1)
#endif
#ifndef MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US
#define MYNEWT_VAL_MCU_CLOCK_XTAL32M_SETTLE_TIME_US (2000)
#endif
#endif

228
hw/mcu/dialog/da1469x/da1469x.ld Normal file
View File

@ -0,0 +1,228 @@
/* Linker script for Dialog DA1469x devices
*
* Version: Sourcery G++ 4.5-1
* Support: https://support.codesourcery.com/GNUToolchain/
*
* Copyright (c) 2007, 2008, 2009, 2010 CodeSourcery, Inc.
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __HeapBase
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* __bssnz_start__
* __bssnz_end__
*/
ENTRY(Reset_Handler)
SECTIONS
{
.imghdr (NOLOAD):
{
. = . + _imghdr_size;
} > FLASH
__text = .;
.text :
{
__isr_vector_start = .;
KEEP(*(.isr_vector))
/* ISR vector shall have exactly 512 bytes */
. = __isr_vector_start + 0x200;
__isr_vector_end = .;
*(.text)
*(.text.*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
*(.eh_frame*)
. = ALIGN(4);
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
. = ALIGN(4);
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
. = ALIGN(4);
} > FLASH
__exidx_end = .;
.intvect :
{
. = ALIGN(4);
__intvect_start__ = .;
. = . + (__isr_vector_end - __isr_vector_start);
. = ALIGN(4);
} > RAM
.sleep_state (NOLOAD) :
{
. = ALIGN(4);
*(sleep_state)
} > RAM
/* This section will be zeroed by RTT package init */
.rtt (NOLOAD):
{
. = ALIGN(4);
*(.rtt)
. = ALIGN(4);
} > RAM
__text_ram_addr = LOADADDR(.text_ram);
.text_ram :
{
. = ALIGN(4);
__text_ram_start__ = .;
*(.text_ram*)
. = ALIGN(4);
__text_ram_end__ = .;
} > RAM AT > FLASH
__etext = LOADADDR(.data);
.data :
{
__data_start__ = .;
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
*(.preinit_array)
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
*(SORT(.init_array.*))
*(.init_array)
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
*(SORT(.fini_array.*))
*(.fini_array)
PROVIDE_HIDDEN (__fini_array_end = .);
*(.jcr)
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM AT > FLASH
.bssnz :
{
. = ALIGN(4);
__bssnz_start__ = .;
*(.bss.core.nz*)
. = ALIGN(4);
__bssnz_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.cmac (NOLOAD) :
{
. = ALIGN(0x400);
*(.libcmac.ram)
} > RAM
/* Heap starts after BSS */
. = ALIGN(8);
__HeapBase = .;
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM
_ram_start = ORIGIN(RAM);
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Top of head is the bottom of the stack */
__HeapLimit = __StackLimit;
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__HeapBase <= __HeapLimit, "region RAM overflowed with stack")
/* Check that intvect is at the beginning of RAM */
ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM")
}

184
hw/mcu/dialog/da1469x/include/hal/hal_gpio.h Normal file
View File

@ -0,0 +1,184 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
/**
* @addtogroup HAL
* @{
* @defgroup HALGpio HAL GPIO
* @{
*/
#ifndef H_HAL_GPIO_
#define H_HAL_GPIO_
#ifdef __cplusplus
extern "C" {
#endif
/**
* The "mode" of the gpio. The gpio is either an input, output, or it is
* "not connected" (the pin specified is not functioning as a gpio)
*/
enum hal_gpio_mode_e {
/** Not connected */
HAL_GPIO_MODE_NC = -1,
/** Input */
HAL_GPIO_MODE_IN = 0,
/** Output */
HAL_GPIO_MODE_OUT = 1
};
typedef enum hal_gpio_mode_e hal_gpio_mode_t;
/*
* The "pull" of the gpio. This is either an input or an output.
*/
enum hal_gpio_pull {
/** Pull-up/down not enabled */
HAL_GPIO_PULL_NONE = 0,
/** Pull-up enabled */
HAL_GPIO_PULL_UP = 1,
/** Pull-down enabled */
HAL_GPIO_PULL_DOWN = 2
};
typedef enum hal_gpio_pull hal_gpio_pull_t;
/*
* IRQ trigger type.
*/
enum hal_gpio_irq_trigger {
HAL_GPIO_TRIG_NONE = 0,
/** IRQ occurs on rising edge */
HAL_GPIO_TRIG_RISING = 1,
/** IRQ occurs on falling edge */
HAL_GPIO_TRIG_FALLING = 2,
/** IRQ occurs on either edge */
HAL_GPIO_TRIG_BOTH = 3,
/** IRQ occurs when line is low */
HAL_GPIO_TRIG_LOW = 4,
/** IRQ occurs when line is high */
HAL_GPIO_TRIG_HIGH = 5
};
typedef enum hal_gpio_irq_trigger hal_gpio_irq_trig_t;
/* Function proto for GPIO irq handler functions */
typedef void (*hal_gpio_irq_handler_t)(void *arg);
/**
* Initializes the specified pin as an input
*
* @param pin Pin number to set as input
* @param pull pull type
*
* @return int 0: no error; -1 otherwise.
*/
int hal_gpio_init_in(int pin, hal_gpio_pull_t pull);
/**
* Initialize the specified pin as an output, setting the pin to the specified
* value.
*
* @param pin Pin number to set as output
* @param val Value to set pin
*
* @return int 0: no error; -1 otherwise.
*/
int hal_gpio_init_out(int pin, int val);
/**
* Deinitialize the specified pin to revert the previous initialization
*
* @param pin Pin number to unset
*
* @return int 0: no error; -1 otherwise.
*/
int hal_gpio_deinit(int pin);
/**
* Write a value (either high or low) to the specified pin.
*
* @param pin Pin to set
* @param val Value to set pin (0:low 1:high)
*/
void hal_gpio_write(int pin, int val);
/**
* Reads the specified pin.
*
* @param pin Pin number to read
*
* @return int 0: low, 1: high
*/
int hal_gpio_read(int pin);
/**
* Toggles the specified pin
*
* @param pin Pin number to toggle
*
* @return current gpio state int 0: low, 1: high
*/
int hal_gpio_toggle(int pin);
/**
* Initialize a given pin to trigger a GPIO IRQ callback.
*
* @param pin The pin to trigger GPIO interrupt on
* @param handler The handler function to call
* @param arg The argument to provide to the IRQ handler
* @param trig The trigger mode (e.g. rising, falling)
* @param pull The mode of the pin (e.g. pullup, pulldown)
*
* @return 0 on success, non-zero error code on failure.
*/
int hal_gpio_irq_init(int pin, hal_gpio_irq_handler_t handler, void *arg,
hal_gpio_irq_trig_t trig, hal_gpio_pull_t pull);
/**
* Release a pin from being configured to trigger IRQ on state change.
*
* @param pin The pin to release
*/
void hal_gpio_irq_release(int pin);
/**
* Enable IRQs on the passed pin
*
* @param pin The pin to enable IRQs on
*/
void hal_gpio_irq_enable(int pin);
/**
* Disable IRQs on the passed pin
*
* @param pin The pin to disable IRQs on
*/
void hal_gpio_irq_disable(int pin);
#ifdef __cplusplus
}
#endif
#endif /* H_HAL_GPIO_ */
/**
* @} HALGpio
* @} HAL
*/

138
hw/mcu/dialog/da1469x/include/mcu/da1469x_clock.h Normal file
View File

@ -0,0 +1,138 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#ifndef __MCU_DA1469X_CLOCK_H_
#define __MCU_DA1469X_CLOCK_H_
#include <stdint.h>
#include "mcu/da1469x_hal.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Initialize XTAL32M
*/
void da1469x_clock_sys_xtal32m_init(void);
/**
* Enable XTAL32M
*/
void da1469x_clock_sys_xtal32m_enable(void);
/**
* Wait for XTAL32M to settle
*/
void da1469x_clock_sys_xtal32m_wait_to_settle(void);
/**
* Switch sys_clk to XTAL32M
*
* Caller shall ensure that XTAL32M is already settled.
*/
void da1469x_clock_sys_xtal32m_switch(void);
/**
* Switch sys_clk to XTAL32M
*
* Waits for XTAL32M to settle before switching.
*/
void da1469x_clock_sys_xtal32m_switch_safe(void);
/**
* Disable RC32M
*/
void da1469x_clock_sys_rc32m_disable(void);
/**
* Enable AMBA clock(s)
*
* @param mask
*/
static inline void
da1469x_clock_amba_enable(uint32_t mask)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
CRG_TOP->CLK_AMBA_REG |= mask;
__HAL_ENABLE_INTERRUPTS(primask);
}
/**
* Disable AMBA clock(s)
*
* @param uint32_t mask
*/
static inline void
da1469x_clock_amba_disable(uint32_t mask)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
CRG_TOP->CLK_AMBA_REG &= ~mask;
__HAL_ENABLE_INTERRUPTS(primask);
}
/**
* Enable PLL96
*/
static inline void
da1469x_clock_sys_pll_enable(void)
{
CRG_XTAL->PLL_SYS_CTRL1_REG |= CRG_XTAL_PLL_SYS_CTRL1_REG_PLL_EN_Msk |
CRG_XTAL_PLL_SYS_CTRL1_REG_LDO_PLL_ENABLE_Msk;
}
/**
* Disable PLL96
*
* If PLL was used as SYS_CLOCK switches to XTAL32M.
*/
void da1469x_clock_sys_pll_disable(void);
/**
* Checks whether PLL96 is locked and can be use as system clock or USB clock
*
* @return 0 if PLL is off, non-0 it its running
*/
static inline int
da1469x_clock_is_pll_locked(void)
{
return 0 != (CRG_XTAL->PLL_SYS_STATUS_REG & CRG_XTAL_PLL_SYS_STATUS_REG_PLL_LOCK_FINE_Msk);
}
/**
* Waits for PLL96 to lock.
*/
void da1469x_clock_pll_wait_to_lock(void);
/**
* Switches system clock to PLL96
*
* Caller shall ensure that PLL is already locked.
*/
void da1469x_clock_sys_pll_switch(void);
#ifdef __cplusplus
}
#endif
#endif /* __MCU_DA1469X_CLOCK_H_ */

53
hw/mcu/dialog/da1469x/include/mcu/da1469x_hal.h Normal file
View File

@ -0,0 +1,53 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#ifndef __MCU_DA1469X_HAL_H_
#define __MCU_DA1469X_HAL_H_
#include <assert.h>
#include "mcu/mcu.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Helper functions to enable/disable interrupts. */
#define __HAL_DISABLE_INTERRUPTS(x) \
do { \
x = __get_PRIMASK(); \
__disable_irq(); \
} while (0)
#define __HAL_ENABLE_INTERRUPTS(x) \
do { \
if (!x) { \
__enable_irq(); \
} \
} while (0)
#define __HAL_ASSERT_CRITICAL() \
do { \
assert(__get_PRIMASK() & 1); \
} while (0)
#ifdef __cplusplus
}
#endif
#endif /* __MCU_DA1469X_HAL_H_ */

165
hw/mcu/dialog/da1469x/include/mcu/mcu.h Normal file
View File

@ -0,0 +1,165 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#ifndef __MCU_MCU_H_
#define __MCU_MCU_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "DA1469xAB.h"
#define sec_text_ram_core __attribute__((section(".text_ram"))) __attribute__((noinline))
#define MCU_SYSVIEW_INTERRUPTS \
"I#1=Reset,I#2=MNI,I#3=HardFault,I#4=MemoryMgmt,I#5=BusFault,I#6=UsageFault," \
"I#7=SecureFault,I#11=SVCall,I#12=DebugMonitor,I#14=PendSV,I#15=SysTick," \
"I#16=SENSOR_NODE,I#17=DMA,I#18=CHARGER_STATE,I#19=CHARGER_ERROR," \
"I#20=CMAC2SYS,I#21=UART,I#22=UART2,I#23=UART3,I#24=I2C,I#25=I2C2,I#26=SPI," \
"I#27=SPI2,I#28=PCM,I#29=SRC_IN,I#30=SRC_OUT,I#31=USB,I#32=TIMER," \
"I#33=TIMER2,I#34=RTC,I#35=KEY_WKUP_GPIO,I#36=PDC,I#37=VBUS,I#38=MRM," \
"I#39=MOTOR_CONTROLLER,I#40=TRNG,I#41=DCDC,I#42=XTAL32M_RDY,I#43=ADC," \
"I#44=ADC2,I#45=CRYPTO,I#46=CAPTIMER1,I#47=RFDIAG,I#48=LCD_CONTROLLER," \
"I#49=PLL_LOCK,I#50=TIMER3,I#51=TIMER4,I#52=LRA,I#53=RTC_EVENT," \
"I#54=GPIO_P0,I#55=GPIO_P1"
/**
* \brief GPIO function
*
*/
typedef enum {
MCU_GPIO_FUNC_GPIO = 0, /**< GPIO */
MCU_GPIO_FUNC_UART_RX = 1, /**< GPIO as UART RX */
MCU_GPIO_FUNC_UART_TX = 2, /**< GPIO as UART TX */
MCU_GPIO_FUNC_UART2_RX = 3, /**< GPIO as UART2 RX */
MCU_GPIO_FUNC_UART2_TX = 4, /**< GPIO as UART2 TX */
MCU_GPIO_FUNC_UART2_CTSN = 5, /**< GPIO as UART2 CTSN */
MCU_GPIO_FUNC_UART2_RTSN = 6, /**< GPIO as UART2 RTSN */
MCU_GPIO_FUNC_UART3_RX = 7, /**< GPIO as UART3 RX */
MCU_GPIO_FUNC_UART3_TX = 8, /**< GPIO as UART3 TX */
MCU_GPIO_FUNC_UART3_CTSN = 9, /**< GPIO as UART3 CTSN */
MCU_GPIO_FUNC_UART3_RTSN = 10, /**< GPIO as UART3 RTSN */
MCU_GPIO_FUNC_ISO_CLK = 11, /**< GPIO as ISO CLK */
MCU_GPIO_FUNC_ISO_DATA = 12, /**< GPIO as ISO DATA */
MCU_GPIO_FUNC_SPI_DI = 13, /**< GPIO as SPI DI */
MCU_GPIO_FUNC_SPI_DO = 14, /**< GPIO as SPI DO */
MCU_GPIO_FUNC_SPI_CLK = 15, /**< GPIO as SPI CLK */
MCU_GPIO_FUNC_SPI_EN = 16, /**< GPIO as SPI EN */
MCU_GPIO_FUNC_SPI2_DI = 17, /**< GPIO as SPI2 DI */
MCU_GPIO_FUNC_SPI2_DO = 18, /**< GPIO as SPI2 DO */
MCU_GPIO_FUNC_SPI2_CLK = 19, /**< GPIO as SPI2 CLK */
MCU_GPIO_FUNC_SPI2_EN = 20, /**< GPIO as SPI2 EN */
MCU_GPIO_FUNC_I2C_SCL = 21, /**< GPIO as I2C SCL */
MCU_GPIO_FUNC_I2C_SDA = 22, /**< GPIO as I2C SDA */
MCU_GPIO_FUNC_I2C2_SCL = 23, /**< GPIO as I2C2 SCL */
MCU_GPIO_FUNC_I2C2_SDA = 24, /**< GPIO as I2C2 SDA */
MCU_GPIO_FUNC_USB_SOF = 25, /**< GPIO as USB SOF */
MCU_GPIO_FUNC_ADC = 26, /**< GPIO as ADC (dedicated pin) */
MCU_GPIO_FUNC_USB = 27, /**< GPIO as USB */
MCU_GPIO_FUNC_PCM_DI = 28, /**< GPIO as PCM DI */
MCU_GPIO_FUNC_PCM_DO = 29, /**< GPIO as PCM DO */
MCU_GPIO_FUNC_PCM_FSC = 30, /**< GPIO as PCM FSC */
MCU_GPIO_FUNC_PCM_CLK = 31, /**< GPIO as PCM CLK */
MCU_GPIO_FUNC_PDM_DATA = 32, /**< GPIO as PDM DATA */
MCU_GPIO_FUNC_PDM_CLK = 33, /**< GPIO as PDM CLK */
MCU_GPIO_FUNC_COEX_EXT_ACT = 34, /**< GPIO as COEX EXT ACT0 */
MCU_GPIO_FUNC_COEX_SMART_ACT = 35, /**< GPIO as COEX SMART ACT */
MCU_GPIO_FUNC_COEX_SMART_PRI = 36, /**< GPIO as COEX SMART PRI */
MCU_GPIO_FUNC_PORT0_DCF = 37, /**< GPIO as PORT0 DCF */
MCU_GPIO_FUNC_PORT1_DCF = 38, /**< GPIO as PORT1 DCF */
MCU_GPIO_FUNC_PORT2_DCF = 39, /**< GPIO as PORT2 DCF */
MCU_GPIO_FUNC_PORT3_DCF = 40, /**< GPIO as PORT3 DCF */
MCU_GPIO_FUNC_PORT4_DCF = 41, /**< GPIO as PORT4 DCF */
MCU_GPIO_FUNC_CLOCK = 42, /**< GPIO as CLOCK */
MCU_GPIO_FUNC_PG = 43, /**< GPIO as PG */
MCU_GPIO_FUNC_LCD = 44, /**< GPIO as LCD */
MCU_GPIO_FUNC_LCD_SPI_DC = 45, /**< GPIO as LCD SPI DC */
MCU_GPIO_FUNC_LCD_SPI_DO = 46, /**< GPIO as LCD SPI DO */
MCU_GPIO_FUNC_LCD_SPI_CLK = 47, /**< GPIO as LCD SPI CLK */
MCU_GPIO_FUNC_LCD_SPI_EN = 48, /**< GPIO as LCD SPI EN */
MCU_GPIO_FUNC_TIM_PWM = 49, /**< GPIO as TIM PWM */
MCU_GPIO_FUNC_TIM2_PWM = 50, /**< GPIO as TIM2 PWM */
MCU_GPIO_FUNC_TIM_1SHOT = 51, /**< GPIO as TIM 1SHOT */
MCU_GPIO_FUNC_TIM2_1SHOT = 52, /**< GPIO as TIM2 1SHOT */
MCU_GPIO_FUNC_TIM3_PWM = 53, /**< GPIO as TIM3 PWM */
MCU_GPIO_FUNC_TIM4_PWM = 54, /**< GPIO as TIM4 PWM */
MCU_GPIO_FUNC_AGC_EXT = 55, /**< GPIO as AGC EXT */
MCU_GPIO_FUNC_CMAC_DIAG0 = 56, /**< GPIO as CMAC DIAG0 */
MCU_GPIO_FUNC_CMAC_DIAG1 = 57, /**< GPIO as CMAC DIAG1 */
MCU_GPIO_FUNC_CMAC_DIAG2 = 58, /**< GPIO as CMAC DIAG2 */
MCU_GPIO_FUNC_CMAC_DIAGX = 59, /**< GPIO as CMAC DIAGX */
MCU_GPIO_FUNC_LAST,
} mcu_gpio_func;
#define MCU_GPIO_MODE_INPUT 0x000 /**< GPIO as an input */
#define MCU_GPIO_MODE_INPUT_PULLUP 0x100 /**< GPIO as an input with pull-up */
#define MCU_GPIO_MODE_INPUT_PULLDOWN 0x200 /**< GPIO as an input with pull-down */
#define MCU_GPIO_MODE_OUTPUT 0x300 /**< GPIO as an output */
#define MCU_GPIO_MODE_OUTPUT_OPEN_DRAIN 0x700 /**< GPIO as an open-drain output */
#define MCU_GPIO_PORT0_PIN_COUNT 32
#define MCU_GPIO_PORT0(pin) ((0 * 32) + (pin))
#define MCU_GPIO_PORT1(pin) ((1 * 32) + (pin))
#define MCU_DMA_CHAN_MAX 8
#define MCU_PIN_GPADC_SEL0 MCU_GPIO_PORT1(9)
#define MCU_PIN_GPADC_SEL1 MCU_GPIO_PORT0(25)
#define MCU_PIN_GPADC_SEL2 MCU_GPIO_PORT0(8)
#define MCU_PIN_GPADC_SEL3 MCU_GPIO_PORT0(9)
#define MCU_PIN_GPADC_SEL16 MCU_GPIO_PORT1(13)
#define MCU_PIN_GPADC_SEL17 MCU_GPIO_PORT1(12)
#define MCU_PIN_GPADC_SEL18 MCU_GPIO_PORT1(18)
#define MCU_PIN_GPADC_SEL19 MCU_GPIO_PORT1(19)
#define MCU_PIN_GPADC_DIFF0_P0 MCU_GPIO_PORT1(9)
#define MCU_PIN_GPADC_DIFF0_P1 MCU_GPIO_PORT0(25)
#define MCU_PIN_GPADC_DIFF1_P0 MCU_GPIO_PORT0(8)
#define MCU_PIN_GPADC_DIFF1_P1 MCU_GPIO_PORT0(9)
#define MCU_PIN_SDADC0 MCU_GPIO_PORT1(9)
#define MCU_PIN_SDADC1 MCU_GPIO_PORT0(25)
#define MCU_PIN_SDADC2 MCU_GPIO_PORT0(8)
#define MCU_PIN_SDADC3 MCU_GPIO_PORT0(9)
#define MCU_PIN_SDADC4 MCU_GPIO_PORT1(14)
#define MCU_PIN_SDADC5 MCU_GPIO_PORT1(20)
#define MCU_PIN_SDADC6 MCU_GPIO_PORT1(21)
#define MCU_PIN_SDADC7 MCU_GPIO_PORT1(22)
void mcu_gpio_set_pin_function(int pin, int mode, mcu_gpio_func func);
void mcu_gpio_enter_sleep(void);
void mcu_gpio_exit_sleep(void);
#define MCU_MEM_QSPIF_M_END_REMAP_ADDRESS (0x800000)
#define MCU_MEM_QSPIF_M_START_ADDRESS (0x16000000)
#define MCU_MEM_QSPIF_M_END_ADDRESS (0x18000000)
#define MCU_MEM_SYSRAM_START_ADDRESS (0x20000000)
#define MCU_MEM_SYSRAM_END_ADDRESS (0x20080000)
#define MCU_OTPM_BASE 0x30080000UL
#define MCU_OTPM_SIZE 4096
/* Largest group id seen on a DA14699 was 18 so far */
#define MCU_TRIMV_GROUP_ID_MAX (18)
#ifdef __cplusplus
}
#endif
#endif /* __MCU_MCU_H_ */

159
hw/mcu/dialog/da1469x/src/da1469x_clock.c Normal file
View File

@ -0,0 +1,159 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include "syscfg/syscfg.h"
#include "mcu/da1469x_hal.h"
#include "mcu/da1469x_clock.h"
static inline bool
da1469x_clock_is_xtal32m_settled(void)
{
return ((*(uint32_t *)0x5001001c & 0xff00) == 0) &&
((*(uint32_t *)0x50010054 & 0x000f) != 0xb);
}
void
da1469x_clock_sys_xtal32m_init(void)
{
uint32_t reg;
int xtalrdy_cnt;
/* Number of lp_clk cycles (~30.5us) */
xtalrdy_cnt = MYNEWT_VAL(MCU_CLOCK_XTAL32M_SETTLE_TIME_US) * 10 / 305;
reg = CRG_XTAL->XTALRDY_CTRL_REG;
reg &= ~(CRG_XTAL_XTALRDY_CTRL_REG_XTALRDY_CLK_SEL_Msk |
CRG_XTAL_XTALRDY_CTRL_REG_XTALRDY_CNT_Msk);
reg |= xtalrdy_cnt;
CRG_XTAL->XTALRDY_CTRL_REG = reg;
}
void
da1469x_clock_sys_xtal32m_enable(void)
{
PDC->PDC_CTRL0_REG = (2 << PDC_PDC_CTRL0_REG_TRIG_SELECT_Pos) |
(15 << PDC_PDC_CTRL0_REG_TRIG_ID_Pos) |
(1 << PDC_PDC_CTRL0_REG_PDC_MASTER_Pos) |
(1 << PDC_PDC_CTRL0_REG_EN_XTAL_Pos);
PDC->PDC_SET_PENDING_REG = 0;
PDC->PDC_ACKNOWLEDGE_REG = 0;
}
void
da1469x_clock_sys_xtal32m_switch(void)
{
if (CRG_TOP->CLK_CTRL_REG & CRG_TOP_CLK_CTRL_REG_RUNNING_AT_RC32M_Msk) {
CRG_TOP->CLK_SWITCH2XTAL_REG = CRG_TOP_CLK_SWITCH2XTAL_REG_SWITCH2XTAL_Msk;
} else {
CRG_TOP->CLK_CTRL_REG &= ~CRG_TOP_CLK_CTRL_REG_SYS_CLK_SEL_Msk;
}
while (!(CRG_TOP->CLK_CTRL_REG & CRG_TOP_CLK_CTRL_REG_RUNNING_AT_XTAL32M_Msk));
}
void
da1469x_clock_sys_xtal32m_wait_to_settle(void)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
NVIC_ClearPendingIRQ(XTAL32M_RDY_IRQn);
if (!da1469x_clock_is_xtal32m_settled()) {
NVIC_EnableIRQ(XTAL32M_RDY_IRQn);
while (!NVIC_GetPendingIRQ(XTAL32M_RDY_IRQn)) {
__WFI();
}
NVIC_DisableIRQ(XTAL32M_RDY_IRQn);
}
__HAL_ENABLE_INTERRUPTS(primask);
}
void
da1469x_clock_sys_xtal32m_switch_safe(void)
{
da1469x_clock_sys_xtal32m_wait_to_settle();
da1469x_clock_sys_xtal32m_switch();
}
void
da1469x_clock_sys_rc32m_disable(void)
{
CRG_TOP->CLK_RC32M_REG &= ~CRG_TOP_CLK_RC32M_REG_RC32M_ENABLE_Msk;
}
void
da1469x_clock_lp_xtal32k_enable(void)
{
CRG_TOP->CLK_XTAL32K_REG |= CRG_TOP_CLK_XTAL32K_REG_XTAL32K_ENABLE_Msk;
}
void
da1469x_clock_lp_xtal32k_switch(void)
{
CRG_TOP->CLK_CTRL_REG = (CRG_TOP->CLK_CTRL_REG &
~CRG_TOP_CLK_CTRL_REG_LP_CLK_SEL_Msk) |
(2 << CRG_TOP_CLK_CTRL_REG_LP_CLK_SEL_Pos);
}
void
da1469x_clock_pll_disable(void)
{
while (CRG_TOP->CLK_CTRL_REG & CRG_TOP_CLK_CTRL_REG_RUNNING_AT_PLL96M_Msk) {
CRG_TOP->CLK_SWITCH2XTAL_REG = CRG_TOP_CLK_SWITCH2XTAL_REG_SWITCH2XTAL_Msk;
}
CRG_XTAL->PLL_SYS_CTRL1_REG &= ~CRG_XTAL_PLL_SYS_CTRL1_REG_PLL_EN_Msk;
}
void
da1469x_clock_pll_wait_to_lock(void)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
NVIC_ClearPendingIRQ(PLL_LOCK_IRQn);
if (!da1469x_clock_is_pll_locked()) {
NVIC_EnableIRQ(PLL_LOCK_IRQn);
while (!NVIC_GetPendingIRQ(PLL_LOCK_IRQn)) {
__WFI();
}
NVIC_DisableIRQ(PLL_LOCK_IRQn);
}
__HAL_ENABLE_INTERRUPTS(primask);
}
void
da1469x_clock_sys_pll_switch(void)
{
/* CLK_SEL_Msk == 3 means PLL */
CRG_TOP->CLK_CTRL_REG |= CRG_TOP_CLK_CTRL_REG_SYS_CLK_SEL_Msk;
while (!(CRG_TOP->CLK_CTRL_REG & CRG_TOP_CLK_CTRL_REG_RUNNING_AT_PLL96M_Msk));
}

478
hw/mcu/dialog/da1469x/src/hal_gpio.c Normal file
View File

@ -0,0 +1,478 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include <assert.h>
#include <stddef.h>
#include "syscfg/syscfg.h"
#include "mcu/da1469x_hal.h"
#include <mcu/mcu.h>
#include "hal/hal_gpio.h"
/* GPIO interrupts */
#define HAL_GPIO_MAX_IRQ MYNEWT_VAL(MCU_GPIO_MAX_IRQ)
#define GPIO_REG(name) ((__IO uint32_t *)(GPIO_BASE + offsetof(GPIO_Type, name)))
#define WAKEUP_REG(name) ((__IO uint32_t *)(WAKEUP_BASE + offsetof(WAKEUP_Type, name)))
#define CRG_TOP_REG(name) ((__IO uint32_t *)(CRG_TOP_BASE + offsetof(CRG_TOP_Type, name)))
#ifndef MCU_GPIO_PORT0_PIN_COUNT
#define MCU_GPIO_PORT0_PIN_COUNT 32
#endif
#if (MCU_GPIO_PORT0_PIN_COUNT) == 32
#define GPIO_PORT(pin) (((unsigned)(pin)) >> 5U)
#define GPIO_PORT_PIN(pin) (((unsigned)(pin)) & 31U)
#else
#define GPIO_PORT(pin) (((unsigned)(pin)) < MCU_GPIO_PORT0_PIN_COUNT ? 0 : 1)
#define GPIO_PORT_PIN(pin) ((unsigned)(pin) < MCU_GPIO_PORT0_PIN_COUNT ? \
(pin) : (pin) - MCU_GPIO_PORT0_PIN_COUNT)
#endif
#define GPIO_PIN_BIT(pin) (1 << GPIO_PORT_PIN(pin))
#define GPIO_PIN_DATA_REG_ADDR(pin) (GPIO_REG(P0_DATA_REG) + GPIO_PORT(pin))
#define GPIO_PIN_DATA_REG(pin) *GPIO_PIN_DATA_REG_ADDR(pin)
#define GPIO_PIN_SET_DATA_REG_ADDR(pin) (GPIO_REG(P0_SET_DATA_REG) + GPIO_PORT(pin))
#define GPIO_PIN_SET_DATA_REG(pin) *GPIO_PIN_SET_DATA_REG_ADDR(pin)
#define GPIO_PIN_RESET_DATA_REG_ADDR(pin) (GPIO_REG(P0_RESET_DATA_REG) + GPIO_PORT(pin))
#define GPIO_PIN_RESET_DATA_REG(pin) *GPIO_PIN_RESET_DATA_REG_ADDR(pin)
#define GPIO_PIN_MODE_REG_ADDR(pin) (GPIO_REG(P0_00_MODE_REG) + (pin))
#define GPIO_PIN_MODE_REG(pin) *GPIO_PIN_MODE_REG_ADDR(pin)
#define GPIO_PIN_PADPWR_CTRL_REG_ADDR(pin) (GPIO_REG(P0_PADPWR_CTRL_REG) + GPIO_PORT(pin))
#define GPIO_PIN_PADPWR_CTRL_REG(pin) *GPIO_PIN_PADPWR_CTRL_REG_ADDR(pin)
#define GPIO_PIN_UNLATCH_ADDR(pin) (CRG_TOP_REG(P0_SET_PAD_LATCH_REG) + GPIO_PORT(pin) * 3)
#define GPIO_PIN_LATCH_ADDR(pin) (CRG_TOP_REG(P0_RESET_PAD_LATCH_REG) + GPIO_PORT(pin) * 3)
#define WKUP_CTRL_REG_ADDR (WAKEUP_REG(WKUP_CTRL_REG))
#define WKUP_RESET_IRQ_REG_ADDR (WAKEUP_REG(WKUP_RESET_IRQ_REG))
#define WKUP_SELECT_PX_REG_ADDR(pin) (WAKEUP_REG(WKUP_SELECT_P0_REG) + GPIO_PORT(pin))
#define WKUP_SELECT_PX_REG(pin) *(WKUP_SELECT_PX_REG_ADDR(pin))
#define WKUP_POL_PX_REG_ADDR(pin) (WAKEUP_REG(WKUP_POL_P0_REG) + GPIO_PORT(pin))
#define WKUP_POL_PX_SET_FALLING(pin) do { *(WKUP_POL_PX_REG_ADDR(pin)) |= GPIO_PIN_BIT(pin); } while (0)
#define WKUP_POL_PX_SET_RISING(pin) do { *(WKUP_POL_PX_REG_ADDR(pin)) &= ~GPIO_PIN_BIT(pin); } while (0)
#define WKUP_STAT_PX_REG_ADDR(pin) (WAKEUP_REG(WKUP_STATUS_P0_REG) + GPIO_PORT(pin))
#define WKUP_STAT(pin) ((*(WKUP_STAT_PX_REG_ADDR(pin)) >> GPIO_PORT_PIN(pin)) & 1)
#define WKUP_CLEAR_PX_REG_ADDR(pin) (WAKEUP_REG(WKUP_CLEAR_P0_REG) + GPIO_PORT(pin))
#define WKUP_CLEAR_PX(pin) do { (*(WKUP_CLEAR_PX_REG_ADDR(pin)) = GPIO_PIN_BIT(pin)); } while (0)
#define WKUP_SEL_GPIO_PX_REG_ADDR(pin) (WAKEUP_REG(WKUP_SEL_GPIO_P0_REG) + GPIO_PORT(pin))
#define WKUP_SEL_GPIO_PX_REG(pin) *(WKUP_SEL_GPIO_PX_REG_ADDR(pin))
/* Storage for GPIO callbacks. */
struct hal_gpio_irq {
int pin;
hal_gpio_irq_handler_t func;
void *arg;
};
static struct hal_gpio_irq hal_gpio_irqs[HAL_GPIO_MAX_IRQ];
#if MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM) >= 0
static uint32_t g_mcu_gpio_latch_state[2];
static uint8_t g_mcu_gpio_retained_num;
static struct da1469x_retreg g_mcu_gpio_retained[MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM)];
#endif
/*
* We assume that any latched pin has default configuration, i.e. was either
* not configured or was deinited. Any unlatched pin is considered to be used
* by someone.
*
* By default, all pins are assumed to have default configuration and are
* latched. This allows PD_COM to be disabled (if no other peripheral needs
* it) since we do not need GPIO mux to be active.
*
* Configuration of any pin shall be done as follows, with interrupts disabled:
* 1. call mcu_gpio_unlatch_prepare() to enable PD_COM if needed
* 2. configure pin
* 3. call mcu_gpio_unlatch() to actually unlatch pin
*
* Once pin is restored to default configuration it shall be latched again by
* calling mcu_gpio_latch().
*/
#if MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM) >= 0
static void
mcu_gpio_retained_add_port(uint32_t latch_val, volatile uint32_t *base_reg)
{
struct da1469x_retreg *retreg;
int pin;
retreg = &g_mcu_gpio_retained[g_mcu_gpio_retained_num];
while (latch_val) {
assert(g_mcu_gpio_retained_num < MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM));
pin = __builtin_ctz(latch_val);
latch_val &= ~(1 << pin);
da1469x_retreg_assign(retreg, &base_reg[pin]);
g_mcu_gpio_retained_num++;
retreg++;
}
}
#endif
static void
mcu_gpio_retained_refresh(void)
{
#if MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM) >= 0
g_mcu_gpio_retained_num = 0;
mcu_gpio_retained_add_port(CRG_TOP->P0_PAD_LATCH_REG, &GPIO->P0_00_MODE_REG);
mcu_gpio_retained_add_port(CRG_TOP->P1_PAD_LATCH_REG, &GPIO->P1_00_MODE_REG);
#endif
}
static inline void
mcu_gpio_unlatch_prepare(int pin)
{
__HAL_ASSERT_CRITICAL();
(void)pin;
/* Acquire PD_COM if first pin will be unlatched */
// if ((CRG_TOP->P0_PAD_LATCH_REG | CRG_TOP->P1_PAD_LATCH_REG) == 0) {
// da1469x_pd_acquire(MCU_PD_DOMAIN_COM);
// }
}
static inline void
mcu_gpio_unlatch(int pin)
{
__HAL_ASSERT_CRITICAL();
*GPIO_PIN_UNLATCH_ADDR(pin) = GPIO_PIN_BIT(pin);
mcu_gpio_retained_refresh();
}
static inline void
mcu_gpio_latch(int pin)
{
(void)pin;
// uint32_t primask;
// uint32_t latch_pre;
// uint32_t latch_post;
//
// __HAL_DISABLE_INTERRUPTS(primask);
//
// latch_pre = CRG_TOP->P0_PAD_LATCH_REG | CRG_TOP->P1_PAD_LATCH_REG;
//
// *GPIO_PIN_LATCH_ADDR(pin) = GPIO_PIN_BIT(pin);
// mcu_gpio_retained_refresh();
//
// latch_post = CRG_TOP->P0_PAD_LATCH_REG | CRG_TOP->P1_PAD_LATCH_REG;
//
// /* Release PD_COM if last pin was latched */
// if (latch_pre && !latch_post) {
// da1469x_pd_release(MCU_PD_DOMAIN_COM);
// }
//
// __HAL_ENABLE_INTERRUPTS(primask);
}
int
hal_gpio_init_in(int pin, hal_gpio_pull_t pull)
{
volatile uint32_t *px_xx_mod_reg = GPIO_PIN_MODE_REG_ADDR(pin);
uint32_t regval;
uint32_t primask;
switch (pull) {
case HAL_GPIO_PULL_UP:
regval = MCU_GPIO_FUNC_GPIO | MCU_GPIO_MODE_INPUT_PULLUP;
break;
case HAL_GPIO_PULL_DOWN:
regval = MCU_GPIO_FUNC_GPIO | MCU_GPIO_MODE_INPUT_PULLDOWN;
break;
case HAL_GPIO_PULL_NONE:
regval = MCU_GPIO_FUNC_GPIO | MCU_GPIO_MODE_INPUT;
break;
default:
return -1;
}
__HAL_DISABLE_INTERRUPTS(primask);
mcu_gpio_unlatch_prepare(pin);
*px_xx_mod_reg = regval;
mcu_gpio_unlatch(pin);
__HAL_ENABLE_INTERRUPTS(primask);
return 0;
}
int
hal_gpio_init_out(int pin, int val)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
mcu_gpio_unlatch_prepare(pin);
GPIO_PIN_MODE_REG(pin) = MCU_GPIO_MODE_OUTPUT;
if (val) {
GPIO_PIN_SET_DATA_REG(pin) = GPIO_PIN_BIT(pin);
} else {
GPIO_PIN_RESET_DATA_REG(pin) = GPIO_PIN_BIT(pin);
}
mcu_gpio_unlatch(pin);
__HAL_ENABLE_INTERRUPTS(primask);
return 0;
}
int
hal_gpio_deinit(int pin)
{
/* Reset mode to default value and latch pin */
GPIO_PIN_MODE_REG(pin) = 0x200;
GPIO_PIN_RESET_DATA_REG(pin) = GPIO_PIN_BIT(pin);
mcu_gpio_latch(pin);
return 0;
}
void
hal_gpio_write(int pin, int val)
{
if (val) {
GPIO_PIN_SET_DATA_REG(pin) = GPIO_PIN_BIT(pin);
} else {
GPIO_PIN_RESET_DATA_REG(pin) = GPIO_PIN_BIT(pin);
}
}
int
hal_gpio_read(int pin)
{
return (GPIO_PIN_DATA_REG(pin) >> GPIO_PORT_PIN(pin)) & 1;
}
int
hal_gpio_toggle(int pin)
{
int new_value = hal_gpio_read(pin) == 0;
hal_gpio_write(pin, new_value);
return new_value;
}
static void
hal_gpio_irq_handler(void)
{
struct hal_gpio_irq *irq;
uint32_t stat;
int i;
*WKUP_RESET_IRQ_REG_ADDR = 1;
NVIC_ClearPendingIRQ(KEY_WKUP_GPIO_IRQn);
for (i = 0; i < HAL_GPIO_MAX_IRQ; i++) {
irq = &hal_gpio_irqs[i];
/* Read latched status value from relevant GPIO port */
stat = WKUP_STAT(irq->pin);
if (irq->func && stat) {
irq->func(irq->arg);
}
WKUP_CLEAR_PX(irq->pin);
}
}
static void
hal_gpio_irq_setup(void)
{
static uint8_t irq_setup;
int sr;
if (!irq_setup) {
__HAL_DISABLE_INTERRUPTS(sr);
irq_setup = 1;
NVIC_ClearPendingIRQ(GPIO_P0_IRQn);
NVIC_ClearPendingIRQ(GPIO_P1_IRQn);
NVIC_SetVector(GPIO_P0_IRQn, (uint32_t)hal_gpio_irq_handler);
NVIC_SetVector(GPIO_P1_IRQn, (uint32_t)hal_gpio_irq_handler);
WAKEUP->WKUP_CTRL_REG = 0;
WAKEUP->WKUP_CLEAR_P0_REG = 0xFFFFFFFF;
WAKEUP->WKUP_CLEAR_P1_REG = 0x007FFFFF;
WAKEUP->WKUP_SELECT_P0_REG = 0;
WAKEUP->WKUP_SELECT_P1_REG = 0;
WAKEUP->WKUP_SEL_GPIO_P0_REG = 0;
WAKEUP->WKUP_SEL_GPIO_P1_REG = 0;
WAKEUP->WKUP_RESET_IRQ_REG = 0;
CRG_TOP->CLK_TMR_REG |= CRG_TOP_CLK_TMR_REG_WAKEUPCT_ENABLE_Msk;
__HAL_ENABLE_INTERRUPTS(sr);
NVIC_EnableIRQ(GPIO_P0_IRQn);
NVIC_EnableIRQ(GPIO_P1_IRQn);
}
}
static int
hal_gpio_find_empty_slot(void)
{
int i;
for (i = 0; i < HAL_GPIO_MAX_IRQ; i++) {
if (hal_gpio_irqs[i].func == NULL) {
return i;
}
}
return -1;
}
int
hal_gpio_irq_init(int pin, hal_gpio_irq_handler_t handler, void *arg,
hal_gpio_irq_trig_t trig, hal_gpio_pull_t pull)
{
int i;
hal_gpio_irq_setup();
i = hal_gpio_find_empty_slot();
/* If assert failed increase syscfg value MCU_GPIO_MAX_IRQ */
assert(i >= 0);
if (i < 0) {
return -1;
}
hal_gpio_init_in(pin, pull);
switch (trig) {
case HAL_GPIO_TRIG_RISING:
WKUP_POL_PX_SET_RISING(pin);
break;
case HAL_GPIO_TRIG_FALLING:
WKUP_POL_PX_SET_FALLING(pin);
break;
case HAL_GPIO_TRIG_BOTH:
/* Not supported */
default:
return -1;
}
hal_gpio_irqs[i].pin = pin;
hal_gpio_irqs[i].func = handler;
hal_gpio_irqs[i].arg = arg;
return 0;
}
void
hal_gpio_irq_release(int pin)
{
int i;
hal_gpio_irq_disable(pin);
for (i = 0; i < HAL_GPIO_MAX_IRQ; i++) {
if (hal_gpio_irqs[i].pin == pin && hal_gpio_irqs[i].func) {
hal_gpio_irqs[i].pin = -1;
hal_gpio_irqs[i].arg = NULL;
hal_gpio_irqs[i].func = NULL;
}
}
}
void
hal_gpio_irq_enable(int pin)
{
WKUP_SEL_GPIO_PX_REG(pin) |= GPIO_PIN_BIT(pin);
}
void
hal_gpio_irq_disable(int pin)
{
WKUP_SEL_GPIO_PX_REG(pin) &= ~GPIO_PIN_BIT(pin);
WKUP_CLEAR_PX(pin);
}
void
mcu_gpio_set_pin_function(int pin, int mode, mcu_gpio_func func)
{
uint32_t primask;
__HAL_DISABLE_INTERRUPTS(primask);
mcu_gpio_unlatch_prepare(pin);
GPIO_PIN_MODE_REG(pin) = (func & GPIO_P0_00_MODE_REG_PID_Msk) |
(mode & (GPIO_P0_00_MODE_REG_PUPD_Msk | GPIO_P0_00_MODE_REG_PPOD_Msk));
mcu_gpio_unlatch(pin);
__HAL_ENABLE_INTERRUPTS(primask);
}
void
mcu_gpio_enter_sleep(void)
{
#if MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM) >= 0
if (g_mcu_gpio_retained_num == 0) {
return;
}
g_mcu_gpio_latch_state[0] = CRG_TOP->P0_PAD_LATCH_REG;
g_mcu_gpio_latch_state[1] = CRG_TOP->P1_PAD_LATCH_REG;
da1469x_retreg_update(g_mcu_gpio_retained, g_mcu_gpio_retained_num);
CRG_TOP->P0_RESET_PAD_LATCH_REG = CRG_TOP_P0_PAD_LATCH_REG_P0_LATCH_EN_Msk;
CRG_TOP->P1_RESET_PAD_LATCH_REG = CRG_TOP_P1_PAD_LATCH_REG_P1_LATCH_EN_Msk;
da1469x_pd_release(MCU_PD_DOMAIN_COM);
#endif
}
void
mcu_gpio_exit_sleep(void)
{
#if MYNEWT_VAL(MCU_GPIO_RETAINABLE_NUM) >= 0
if (g_mcu_gpio_retained_num == 0) {
return;
}
da1469x_pd_acquire(MCU_PD_DOMAIN_COM);
da1469x_retreg_restore(g_mcu_gpio_retained, g_mcu_gpio_retained_num);
/* Set pins states to their latched values */
GPIO->P0_DATA_REG = GPIO->P0_DATA_REG;
GPIO->P1_DATA_REG = GPIO->P1_DATA_REG;
CRG_TOP->P0_PAD_LATCH_REG = g_mcu_gpio_latch_state[0];
CRG_TOP->P1_PAD_LATCH_REG = g_mcu_gpio_latch_state[1];
#endif
}

136
hw/mcu/dialog/da1469x/src/hal_system.c Normal file
View File

@ -0,0 +1,136 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include <assert.h>
#include "syscfg/syscfg.h"
#include "mcu/da1469x_clock.h"
#include "mcu/da1469x_lpclk.h"
#include "mcu/da1469x_pd.h"
#include "mcu/da1469x_pdc.h"
#include "mcu/da1469x_prail.h"
#include "hal/hal_system.h"
#include "os/os_cputime.h"
#if !MYNEWT_VAL(BOOT_LOADER)
static enum hal_reset_reason g_hal_reset_reason;
#endif
void
hal_system_init(void)
{
#if MYNEWT_VAL(MCU_DCDC_ENABLE)
da1469x_prail_dcdc_enable();
#endif
/*
* RESET_STAT_REG has to be cleared to allow HW set bits during next reset
* so we should read it now and keep result for application to check at any
* time. This does not happen for bootloader since reading reset reason in
* bootloader would prevent application from reading it.
*/
#if !MYNEWT_VAL(BOOT_LOADER)
uint32_t reg;
reg = CRG_TOP->RESET_STAT_REG;
CRG_TOP->RESET_STAT_REG = 0;
if (reg & CRG_TOP_RESET_STAT_REG_PORESET_STAT_Msk) {
g_hal_reset_reason = HAL_RESET_POR;
} else if (reg & CRG_TOP_RESET_STAT_REG_WDOGRESET_STAT_Msk) {
g_hal_reset_reason = HAL_RESET_WATCHDOG;
} else if (reg & CRG_TOP_RESET_STAT_REG_SWRESET_STAT_Msk) {
g_hal_reset_reason = HAL_RESET_SOFT;
} else if (reg & CRG_TOP_RESET_STAT_REG_HWRESET_STAT_Msk) {
g_hal_reset_reason = HAL_RESET_PIN;
} else {
g_hal_reset_reason = 0;
}
#endif
}
void
hal_system_reset(void)
{
#if MYNEWT_VAL(HAL_SYSTEM_RESET_CB)
hal_system_reset_cb();
#endif
while (1) {
HAL_DEBUG_BREAK();
CRG_TOP->SYS_CTRL_REG = 0x20;
NVIC_SystemReset();
}
}
int
hal_debugger_connected(void)
{
return CRG_TOP->SYS_STAT_REG & CRG_TOP_SYS_STAT_REG_DBG_IS_ACTIVE_Msk;
}
void
hal_system_clock_start(void)
{
/* Reset clock dividers to 0 */
CRG_TOP->CLK_AMBA_REG &= ~(CRG_TOP_CLK_AMBA_REG_HCLK_DIV_Msk | CRG_TOP_CLK_AMBA_REG_PCLK_DIV_Msk);
/* PD_TIM is already started in SystemInit */
da1469x_clock_sys_xtal32m_init();
da1469x_clock_sys_xtal32m_enable();
#if MYNEWT_VAL(MCU_PLL_ENABLE)
da1469x_clock_sys_pll_enable();
#endif
#if MYNEWT_VAL_CHOICE(MCU_SYSCLK_SOURCE, PLL96)
da1469x_clock_pll_wait_to_lock();
da1469x_clock_sys_pll_switch();
#endif
#if MYNEWT_VAL_CHOICE(MCU_SYSCLK_SOURCE, XTAL32M)
/* Switch to XTAL32M and disable RC32M */
da1469x_clock_sys_xtal32m_switch_safe();
#endif
da1469x_clock_sys_rc32m_disable();
#if MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, RCX)
/* Switch to RCX and calibrate it */
da1469x_clock_lp_rcx_enable();
da1469x_clock_lp_rcx_switch();
da1469x_clock_lp_rcx_calibrate();
da1469x_lpclk_enabled();
#else
/*
* We cannot switch lp_clk to XTAL32K here since it needs some time to
* settle, so we just disable RCX (we don't need it) and then we'll handle
* switch to XTAL32K from sysinit since we need os_cputime for this.
*/
da1469x_clock_lp_rcx_disable();
#endif
}
enum hal_reset_reason
hal_reset_cause(void)
{
#if MYNEWT_VAL(BOOT_LOADER)
return 0;
#else
return g_hal_reset_reason;
#endif
}

177
hw/mcu/dialog/da1469x/src/hal_system_start.c Normal file
View File

@ -0,0 +1,177 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include <assert.h>
#include <stdint.h>
#include "mcu/mcu.h"
#include "mcu/da1469x_hal.h"
#include <flash_map/flash_map.h>
#include <mcu/da1469x_clock.h>
#if MCUBOOT_MYNEWT
#include "bootutil/bootutil.h"
#include "bootutil/image.h"
#include "bootutil/bootutil_log.h"
#include "mcu/da1469x_dma.h"
#include "mcu/da1469x_otp.h"
#endif
#if MYNEWT_VAL(BOOT_CUSTOM_START) && MCUBOOT_MYNEWT
sec_text_ram_core
#endif
void __attribute__((naked))
hal_system_start(void *img_start)
{
uint32_t img_data_addr;
uint32_t *img_data;
img_data_addr = MCU_MEM_QSPIF_M_START_ADDRESS + (uint32_t)img_start;
assert(img_data_addr < MCU_MEM_QSPIF_M_END_ADDRESS);
img_data = (uint32_t *)img_data_addr;
asm volatile (".syntax unified \n"
/* 1st word is stack pointer */
" msr msp, %0 \n"
/* 2nd word is a reset handler (image entry) */
" bx %1 \n"
: /* no output */
: "r" (img_data[0]), "r" (img_data[1]));
}
void
hal_system_restart(void *img_start)
{
uint32_t primask __attribute__((unused));
int i;
/*
* Disable interrupts, and leave them disabled.
* They get re-enabled when system starts coming back again.
*/
__HAL_DISABLE_INTERRUPTS(primask);
for (i = 0; i < sizeof(NVIC->ICER) / sizeof(NVIC->ICER[0]); i++) {
NVIC->ICER[i] = 0xffffffff;
}
hal_system_start(img_start);
}
#if MYNEWT_VAL(BOOT_CUSTOM_START) && MCUBOOT_MYNEWT
#define IMAGE_TLV_AES_NONCE 0x50
#define IMAGE_TLV_SECRET_ID 0x60
sec_text_ram_core void
boot_custom_start(uintptr_t flash_base, struct boot_rsp *rsp)
{
int rc;
struct image_tlv_iter it;
const struct flash_area *fap;
uint32_t off;
uint16_t len;
uint16_t type;
uint8_t buf[8];
uint8_t key;
uint32_t nonce[2];
bool has_aes_nonce;
bool has_secret_id;
DMA_Type *dma_regs = DMA;
uint32_t jump_offset = rsp->br_image_off + rsp->br_hdr->ih_hdr_size;
BOOT_LOG_INF("Custom initialization");
/* skip to booting if we are running nonsecure mode */
if (!(CRG_TOP->SECURE_BOOT_REG & 0x1)) {
hal_system_start((void *)(flash_base + jump_offset));
}
rc = flash_area_open(flash_area_id_from_image_slot(0), &fap);
assert(rc == 0);
rc = bootutil_tlv_iter_begin(&it, rsp->br_hdr, fap, IMAGE_TLV_ANY, true);
assert(rc == 0);
has_aes_nonce = has_secret_id = false;
while (true) {
rc = bootutil_tlv_iter_next(&it, &off, &len, &type);
assert(rc >= 0);
if (rc > 0) {
break;
}
if (type == IMAGE_TLV_AES_NONCE) {
assert(len == 8);
rc = flash_area_read(fap, off, buf, len);
assert(rc == 0);
nonce[0] = __builtin_bswap32(*(uint32_t *)buf);
nonce[1] = __builtin_bswap32(*(uint32_t *)(buf + 4));
has_aes_nonce = true;
} else if (type == IMAGE_TLV_SECRET_ID) {
assert(len == 4);
rc = flash_area_read(fap, off, buf, len);
assert(rc == 0);
key = buf[0];
has_secret_id = true;
}
}
assert(has_aes_nonce && has_secret_id && key <= 7);
/* enable OTP clock and set in read mode */
da1469x_clock_amba_enable(CRG_TOP_CLK_AMBA_REG_OTP_ENABLE_Msk);
da1469x_otp_set_mode(OTPC_MODE_READ);
/* disable decrypt on the fly and program start and end addresses */
QSPIC->QSPIC_CTR_CTRL_REG = 0;
QSPIC->QSPIC_CTR_SADDR_REG = jump_offset;
QSPIC->QSPIC_CTR_EADDR_REG = QSPIC->QSPIC_CTR_SADDR_REG +
rsp->br_hdr->ih_img_size - 1;
/* securely DMA hardware key from secret storage to QSPI decrypt engine */
dma_regs->DMA_REQ_MUX_REG |= 0xf000;
dma_regs->DMA7_LEN_REG = 8;
dma_regs->DMA7_A_START_REG = MCU_OTPM_BASE + OTP_SEGMENT_QSPI_FW_KEYS +
(32 * key);
dma_regs->DMA7_B_START_REG = (uint32_t)&QSPIC->QSPIC_CTR_KEY_0_3_REG;
dma_regs->DMA7_CTRL_REG = DMA_DMA7_CTRL_REG_AINC_Msk |
DMA_DMA7_CTRL_REG_BINC_Msk |
(MCU_DMA_BUS_WIDTH_4B << DMA_DMA7_CTRL_REG_BW_Pos) |
DMA_DMA7_CTRL_REG_DMA_ON_Msk;
while (dma_regs->DMA7_IDX_REG != 8);
/* program NONCE */
QSPIC->QSPIC_CTR_NONCE_0_3_REG = nonce[0];
QSPIC->QSPIC_CTR_NONCE_4_7_REG = nonce[1];
/* turn back on decrypt on the fly */
QSPIC->QSPIC_CTR_CTRL_REG = 1;
/* set OTP to standby and turn off clock */
da1469x_otp_set_mode(OTPC_MODE_STBY);
da1469x_clock_amba_disable(CRG_TOP_CLK_AMBA_REG_OTP_ENABLE_Msk);
hal_system_start((void *)(flash_base + jump_offset));
}
#endif

61
hw/mcu/dialog/da1469x/src/system_da1469x.c Normal file
View File

@ -0,0 +1,61 @@
/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include "mcu/mcu.h"
#include <mcu/da1469x_clock.h>
extern uint8_t __StackLimit;
uint32_t SystemCoreClock = 32000000;
void
SystemInit(void)
{
/* Enable FPU when using hard-float */
#if (__FPU_USED == 1)
SCB->CPACR |= (3UL << 20) | (3UL << 22);
__DSB();
__ISB();
#endif
/* Freez watchdog */
GPREG->SET_FREEZE_REG |= GPREG_SET_FREEZE_REG_FRZ_SYS_WDOG_Msk;
/* Initialize power domains (disable radio only) */
CRG_TOP->PMU_CTRL_REG = CRG_TOP_PMU_CTRL_REG_RADIO_SLEEP_Msk;
CRG_TOP->P0_SET_PAD_LATCH_REG = CRG_TOP_P0_PAD_LATCH_REG_P0_LATCH_EN_Msk;
CRG_TOP->P1_SET_PAD_LATCH_REG = CRG_TOP_P1_PAD_LATCH_REG_P1_LATCH_EN_Msk;
/* Reset clock dividers to 0 */
CRG_TOP->CLK_AMBA_REG &= ~(CRG_TOP_CLK_AMBA_REG_HCLK_DIV_Msk | CRG_TOP_CLK_AMBA_REG_PCLK_DIV_Msk);
/* PD_TIM is already started in SystemInit */
da1469x_clock_sys_xtal32m_init();
da1469x_clock_sys_xtal32m_enable();
da1469x_clock_sys_pll_enable();
da1469x_clock_pll_wait_to_lock();
/* Switch to XTAL32M and disable RC32M */
da1469x_clock_sys_xtal32m_switch_safe();
da1469x_clock_sys_rc32m_disable();
}
void _init(void)
{
}