8de33ca557
Merge branch 'master' into kkitayam-fix_rtt_for_rx_family
2021-07-02 14:10:31 +07:00
ea9ec1fb43
extend stack areas to enable logging
...
add dummy functions to avoid warnings when logging is enable
remove codes regarding OPTLIB
2021-07-02 11:37:23 +09:00
ca98996e1f
better support for hid device set/get protocol
...
add caplock detection for hid_composite
2021-07-01 22:46:39 +07:00
b2fa7358cf
fix typo
2021-06-29 16:38:38 +07:00
2d423514ee
rename rx65n cloud kit to target
...
adding note for adding jlink support for rx65n_target board
2021-06-29 16:33:32 +07:00
01987ef86c
merge saml21 + saml22 = saml2x
2021-06-28 14:37:41 +07:00
7e449b710e
rename bsp saml22 to saml2x
2021-06-28 14:06:13 +07:00
b2feae15e4
Merge pull request #927 from hathach/add-rx65n-board
...
Add rx65n board
2021-06-28 13:53:42 +07:00
856dc0bab9
update doc and clean up
2021-06-28 12:59:53 +07:00
e3b1110cce
rename rx63n to simply rx
2021-06-28 12:51:11 +07:00
8c4641fc05
refactor rx6x bsp
2021-06-28 12:49:30 +07:00
17137bbfff
fix rx65n with freertos build
2021-06-28 12:35:12 +07:00
ec9bfe0333
update renesas rx submodule
2021-06-28 12:27:20 +07:00
239ecadeca
add options for e2l
2021-06-27 23:39:50 +09:00
511b2d47d1
add handling for software configurable interrupts.
2021-06-26 22:42:27 +09:00
60fedaa050
fix baudrate setting
2021-06-26 21:13:35 +09:00
dccb3b1a46
change stdio channel to SCI5 from SCI0.
...
change ports settings for LED and button.
add PLL setting for 240MHz based on HOCO into HardwareSetup().
2021-06-22 00:20:08 +09:00
fbda7d5837
adding rx65n
2021-06-20 15:04:39 +07:00
7dce27c732
fix build with saml21, update microchip driver submodule
2021-06-19 16:21:14 +07:00
82618d2d5f
fix build with mm32 board
2021-06-18 17:18:11 +07:00
0ae83458d5
dsp updata
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
b8ac5f1287
add mindmotion mm32sdk as submodule
...
remove the local copy of mm32
2021-06-18 12:46:27 +07:00
3ba72b53d8
Add MM32 SDK and USB driver
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
7bed7d70f0
add support SAML21
2021-06-15 00:01:28 -05:00
85fc423569
Rename SAM7X to SAMX7X
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 12:36:59 +02:00
776a770947
dcd: sam7x: rename family dcd to include the whole family
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:09:24 +01:00
28875c431b
bsp: same70_xplained: replace template vars from make
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:02:23 +01:00
71aae2743c
bsp: same70_xplained: fix unused variable warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:01:12 +01:00
fd7b18a4f6
Make examples standalone buildable via CMake
2021-06-10 10:11:20 -05:00
26b9fc38ed
Add MM32 SDK and USB driver ( #869 )
...
* Add MM32 SDK and USB driver
* add mindmotion mm32sdk as submodule
remove the local copy of mm32
* mit license
Signed-off-by: zhangslice <1304224508@qq.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-07 17:32:46 +07:00
de436e1f76
undo search replace error
2021-06-02 11:30:42 -05:00
1fb211f390
minor comment change to force rebuild
2021-06-02 09:52:49 -05:00
bef33d108a
move core definition of source file includes from SDK into family.cmake
...
only build webserver example if lwip submodule initialized
2021-06-02 09:33:23 -05:00
109d02531e
remove TINYUSB_FAMILT_PROJECT_NAME_INCLUDES_BOARD setting
2021-06-01 11:21:19 -05:00
ebf6461c42
damn submodules!
2021-06-01 10:58:44 -05:00
6e29bf6e54
rename family.cmake to family_common.cmake
2021-06-01 09:09:25 -05:00
8782d0b8df
fix rp2040 examples build from local tinyusb tree
2021-06-01 09:04:08 -05:00
f5572e24b2
restore unintentionally modified submodules
2021-05-31 11:49:15 -05:00
90d7483d92
guard stdio_uart_init_full with LIB_PICO_STDUI_UART as the function doesn't exist otherwise
2021-05-31 11:18:26 -05:00
13951b43c2
set PICO_TINYUSB_PATH for when building from within tinyusb without pico-sdk/tinyusb submodule
2021-05-31 10:58:14 -05:00
5d161b79bb
Fix up build_family style builds:
...
- added back pre-existing board directories which now just select PICO_BOARD
- added boards/pico_sdk which just uses the pre-existing PICO_BOARD setting
- fixed rp2040/family.cmake to include the magic string "CFG_TUSB_MCU=OPT_MCU_RP2040" expected by build_family.py
2021-05-31 10:06:12 -05:00
95f2478146
Rework rp2040 examples and CMake build:
...
- Examples should be CMake buildable from their own subdirectory; such a build will error out based on
matching .skip.MCU_xxx or a mismatched .only.MCU_
- It should be possible to build from a higher level and use .skip.MCU_ and .only.MCU_ to filter which
examples get built
- The intention is for the CMakeLists.txts in the examples to be non family specific and without MCU based IFs. I have
started this work, but am not really sure the state of the esp32 stuff; in any case the plan is to have
everything encapsulated in the FAMILY/family.cmake
- pico_examples now just includes examples/device/CMakeLists.txt and examples/host/CMakeLists.txt directly, as they
also build correctly when included from there.
Note that .skip.MCU_ for esp32 in the directories it wasn't previously avaiable has not been added, as the .skip is common to the regular Makefile builds also. It isn't clear whether these examples should build for esp32, but if not .skip should be added.
2021-05-30 20:13:47 -05:00
f9c542aa52
fix dfu example build
2021-05-26 18:16:56 +07:00
689d74a595
fix board test example build with nrf
2021-05-26 16:41:17 +07:00
954056da0c
fix warnings cast function type for nrf, fix pico osal warning
...
add TODO for overflow in tusb_fifo.c
2021-05-25 21:02:40 +07:00
e70fb7fd41
fix mkl25z ci
2021-04-29 00:33:03 +07:00
cf64b2214b
fix build with mkl25z
2021-04-29 00:22:28 +07:00
d70af332c0
fixed build with lpc51
2021-04-28 23:44:04 +07:00
fdda9f75db
add lpc54628 but usb clock;phy doesn't seem to be right
2021-04-28 23:25:07 +07:00
8a9f412788
fix lpc54 button
2021-04-28 22:34:56 +07:00
71a1f57ccd
generalize lpc54 family
2021-04-28 21:34:26 +07:00
9a6552c4b3
fix build with lpc54
2021-04-28 20:02:17 +07:00
fcedb2eecb
fix lpc55 build
2021-04-28 19:53:31 +07:00
810057bdb2
fix build with imxrt
2021-04-28 19:30:23 +07:00
af0db342df
update lpc mcu sdk path
2021-04-28 18:30:19 +07:00
aaa8c9928c
add official nxp mcux-sdk submodule
2021-04-28 18:26:04 +07:00
e115e08728
add nxp_lpcopen as submodule
2021-04-28 18:11:49 +07:00
62c5fa1056
remove submodule hw/mcu/nxp
2021-04-28 18:07:26 +07:00
3da76ae449
making new family lpc54
2021-04-28 16:13:43 +07:00
c1c4b2f6bf
complete lpc15 family
2021-04-28 15:16:36 +07:00
bbc6d4f9e8
create new lpc15 family
2021-04-28 15:10:31 +07:00
6882a7af3b
lpc1549 work well now
2021-04-28 14:53:46 +07:00
b5339caa17
clean up lpc55 boards
2021-04-26 21:40:58 +07:00
f4475ea85b
change lpc55s28 default port to 1
2021-04-26 21:26:13 +07:00
7abafbb1bd
Merge pull request #807 from UweBonnes/lpc55-port1-hs
...
mcu-link: Board support for MCU-LINK with LPC55S69JBD64
2021-04-26 20:28:47 +07:00
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
fd7337fe04
mcu_link: Board support for MCU_LINK with LPC55S69JBD64
2021-04-26 10:26:46 +02:00
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
5c5d4b189f
add lpc55 uart write
2021-04-22 19:24:19 +07:00
a2be6c1472
correct boot stage2 for itsybitsy and qt rp2040
2021-04-19 14:03:29 +07:00
01801c881b
Merge pull request #783 from alisitsyn/esp-based_on_334e95f
...
WIP: Add new Espressif target esp32s3 for tinyUSB
2021-04-19 13:01:50 +07:00
faae19f560
update ci build
2021-04-18 15:44:50 +07:00
0517377dcb
add stm32f072eval to group
2021-04-18 15:44:34 +07:00
4c8750badb
add f070 nucleo to group
2021-04-18 14:26:07 +07:00
a5b406da51
create stm32f0 group
2021-04-18 13:24:34 +07:00
9fceed39fc
When used with FreeRTOS, lower the interrupt priority for OTG_FS_IRQn
2021-04-17 23:43:03 +01:00
38cc459c93
Merge branch 'master' into alisitsyn-esp-based_on_334e95f
2021-04-18 01:30:19 +07:00
70c89da7ba
Change LED_STATE_ON to 0 for f401 and f411 blackpill boards
2021-04-16 15:51:19 +01:00
f5e02e72ed
espressif: group boards using target name as a family
...
`hw\bsp` separate one family folder to esp32s2, esp32s3
add board specific board.cmake file to override board specific options(features)
fix examples and test scripts to use new family approach
2021-04-16 15:41:42 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
62a0d5b42d
Changed LED_PIN to 17, LED_STATE_ON to 0
2021-04-15 16:12:19 +01:00
c8bb0020ea
update rp2040 to use pico-sdk externally
...
also try to update ci
2021-04-11 13:37:07 +07:00
bebc910447
remove pico-sdk as submodule
2021-04-11 13:19:51 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
65a04f02b6
add sltb009a bsp
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-31 23:45:33 +01:00
ff2978d95f
added comments for JLink connection work.
2021-03-31 22:15:03 +09:00
25057022e3
add a submodule of Renesas RX family to `hw/mcu/renesas/rx`
2021-03-31 21:53:15 +09:00
74c8887c8e
removed a submodule for Renesas
2021-03-31 21:50:53 +09:00
5a0c594c71
move rx63n into its own family
2021-03-29 23:54:44 +07:00
30687daf9b
added a submodule dependency
2021-03-28 16:45:53 +09:00
0e0f9a8da3
added a submodule for RX63N
2021-03-28 00:46:08 +09:00
0b76a2da88
added a setting for RX63X
2021-03-28 00:34:29 +09:00
5f4e6dafc5
added short-enums into CFLAGS
2021-03-28 00:10:53 +09:00
4c832a9195
Set newlib as the default library
2021-03-27 22:21:47 +09:00
eab214e07c
added settings for LWIP and FreeRTOS
2021-03-27 19:12:34 +09:00
e48b2c681e
fixed definitions for stack areas
2021-03-27 16:00:56 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
18be454011
added board files
2021-03-26 19:30:53 +09:00
fb661a99bd
added efm32gg12 family cmsis
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 19:00:50 +00:00
143582870c
add efm32gg12 family
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 18:59:21 +00:00
8e6f298aa1
Merge upstream TinyUSB master
2021-03-21 09:53:57 +01:00
1f9b7b0c48
SAM54 Xplained Pro: update board setup documentation
2021-03-21 09:48:49 +01:00
1a5a113655
SAM54 Xplained Pro: reduce board setup code for maintenance
...
The board now runs off the internal oscillator at 48 MHz.
This is sufficient to run the TinyUSB examples.
A better performing clock setup is keep in the file as init_clock_xtal()
as an example.
2021-03-21 09:43:29 +01:00
a2006ce214
SAM 54 Xplained Pro: remove board specific define
2021-03-21 09:38:02 +01:00
5e74a7b548
Fixed case in linker script name
2021-03-19 12:27:44 -07:00
2f6f931553
Removed asserts
2021-03-19 12:12:09 -07:00
aa54135087
Initial commit; copied from stmf072-disco and modified for -EVAL board
2021-03-19 10:57:58 -07:00
249852d25c
use boot2_generic_03h for adafruit feather rp2040
...
- also use boot2_generic_03h for now for itsy bitsy and qt rp2040
- change default flash target for rp2040 to flash-pyocd
2021-03-18 19:53:39 +07:00
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
b221cedf80
spaces
2021-03-17 21:36:52 +07:00
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
01ec0d49ca
SAM E54 XPlained Pro: use proper defines SPI->USART for board init
2021-03-13 14:51:16 +01:00
bcf9c8cb27
SAM E54 XPlained Pro: free up DPLL1 for application
2021-03-13 14:50:55 +01:00
1cdd1b0209
Update pico sdk 1.1.0 ( #712 )
...
* update pico-sdk to 1.1.0
also correct fetch_submodule_if_empty behavior
2021-03-10 13:26:14 +07:00
7afe1d9e16
clean up
...
some how lpc55 ci cannot build without pre-checkout lib/sct_neopixel
2021-03-05 22:49:29 +07:00
ca6abea97d
nrf add lib/CMSIS_5 to DEPS_SUBMODULES
2021-03-05 22:30:03 +07:00
7d877e286a
update DEPS_SUBMODULES to optimize ci
2021-03-05 22:24:03 +07:00
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
b846ded487
merge no-family example build
...
specify FAMILY_SUBMODULES for all boards
2021-03-04 22:50:45 +07:00
8cabbb28df
fix enum walkaround forever check for SE0 when pull up is disabled
2021-03-04 18:36:18 +07:00
16f501a14e
clean up
2021-03-03 20:25:44 +07:00
5d226ee733
add h745disco to family group
2021-03-03 20:22:55 +07:00
5799c471f1
group h743eval and h743nucleo into stm32h7
...
tested and work well
2021-03-03 20:07:17 +07:00
e1966f8d91
mcb1800 and lpc18s37 work well with both device and host demo
2021-03-03 17:29:30 +07:00
0dc1a3d3af
add lpc18 family
2021-03-03 16:03:21 +07:00
d91979cfef
rp2040 able to get log with rtt
...
add note for segger rtt block search range
2021-03-02 23:18:44 +07:00
ce942baad2
update pico-sdk to more recent commit
...
- move target_link_libraries() to family.cmake
- enable pico_bootsel_via_double_reset
2021-03-02 22:57:33 +07:00
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
b066fdc2c6
move fomu to its own family, update ci with build risv
2021-03-02 12:24:12 +07:00
71313d934d
update ci for msp430 family
2021-03-02 11:50:57 +07:00
a2366fce53
move msp430 into family
2021-03-02 11:08:44 +07:00
c34b6b2324
remove lib/CMSIS_4 submodule, move nrf to lib/CMSIS_5
2021-03-02 01:18:34 +07:00
76b4b3f827
fix ci build for same board
2021-03-01 21:54:57 +07:00
26d9897551
update microchip_driver
2021-03-01 21:24:11 +07:00
9bc921b342
update family submodule
...
temporarily disable other orphaned and esp32s2 build
2021-03-01 20:48:30 +07:00
c222f6f111
try to fetch needed mcu submodule while running make
2021-03-01 20:25:55 +07:00
e9059b5d84
added lpcxpresso 55s28
2021-03-01 12:31:31 +07:00
2e42858537
move lpc55 into its own family
2021-03-01 00:39:48 +07:00
7d9cddccd2
SAM E54 Xplained Pro: applies reviewer feedback
2021-02-28 08:14:17 +01:00
d2575009a1
SAM 54 Xplained Pro: fix inverted logic for board led
2021-02-28 06:19:25 +01:00
fa8c7bc334
fix indent
2021-02-26 14:08:57 +07:00
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
1dbbfdfe45
clean up
2021-02-24 12:34:23 +07:00
ebc6253bd4
rt1011 msc host work
2021-02-23 10:20:11 +07:00
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
16c8f75637
Adds support for Microchip SAM E54 Xplained Pro
2021-02-20 16:00:27 +01:00
be9f86ca9e
Merge pull request #660 from hathach/fix-typo-midi-write24
...
Fix typo midi write24
2021-02-19 11:22:21 +07:00
c245305f72
update adafruit rp2040 board define
2021-02-19 10:50:50 +07:00
2145ab7664
rp2040/family.c: allow LED_PIN to be undefined
2021-02-18 11:53:18 +00:00
1b678eccf5
add basic support for rt-thread
2021-02-08 20:46:49 +08:00
2997e78da3
bsp: rename SAMD21 LUNA variant to luna_d21
...
We now have SAMD21 and SAMD11 variants of LUNA; so we'll rename the
existing LUNA BSP to be more specific / reflect its version.
2021-02-03 13:35:07 -07:00
6f02e5f1f8
add BSP for SAMD11 variant of Great Scott Gadgets' LUNA boards (SAMD11)
2021-02-03 13:33:40 -07:00
b739c5a837
added pyportal
2021-02-03 13:19:34 +07:00
d24c702b63
add pybadge
...
also correct other samd51 tx,rx pin (not used yet)
2021-02-03 13:12:02 +07:00
4153d9e1b6
update pico-sdk to 1.0.1
2021-02-03 12:39:30 +07:00
8d973a36ed
add adafruit esp32s2 boards
...
- metro esp32s2
- feather esp32s2
- magtag 29" gray
2021-02-01 15:16:38 +07:00
8e954a4391
added enumerate walkaround for RP2040-E5
...
- PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
- target linke pico_fix_rp2040_usb_device_enumeration
2021-02-01 13:37:37 +07:00
ba69da1d8f
add support for LOG=2
...
LOGGER=rtt is not tested since jlink doesn't support rp2040 just yet
2021-01-29 11:24:05 +07:00
4fef2ddb4c
rp2040 move uart id to board specific
2021-01-27 16:37:31 +07:00
e230d683ca
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
4a0f5cbd63
change output filename to BOARD-Directory
2021-01-26 12:46:24 +07:00
045674745a
Merge pull request #604 from kamtom480/spresense-sdk-2.0.2
...
Update Spresense SDK and fix dcd issues
2021-01-25 22:55:46 +07:00
aabf02fe29
add adafruit feather, itsy bitsy and qt rp2040
...
not tested, purely based on schematic
2021-01-25 17:23:33 +07:00
36064e3d7d
Update Spresense SDK to 2.0.2
2021-01-25 10:54:39 +01:00
83614418b5
get all device example build with rp2040 (except freeRTOS)
2021-01-25 13:28:23 +07:00
959a94b98d
rp2040 audio_test compile
2021-01-24 00:44:17 +07:00
ffad6eaf80
cmake esp32s2 and rp2040 getting along
2021-01-24 00:22:23 +07:00
cdd1c45306
improve ci for esp32s2
2021-01-23 18:09:57 +07:00
50e0b81713
add pico-sdk as submodule
2021-01-23 01:05:09 +07:00
c58c8c4229
rp2040 cdc_msc work well
2021-01-23 00:59:50 +07:00
a780a8762b
rp2040 better support multiple boards
2021-01-23 00:32:14 +07:00
b8847de802
get board_test running with pico on both led and button
2021-01-23 00:12:10 +07:00
b6e9c42b02
update cmake build to work with esp32s2 and rp2040
2021-01-22 14:58:32 +07:00
0cf2b02791
Merge branch 'master' into group-boards-into-family
2021-01-22 11:17:10 +07:00
755d4180c9
revert submodules changes
2021-01-21 16:57:10 +07:00
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
d7cfd8b91d
replaced variable name to CMDEXE from UNAME.
...
removed the rule that .d files are converted to .P files.
2021-01-14 01:19:43 +09:00
4f41501fc7
move luna into samd21 group
2021-01-13 16:59:55 +07:00
4b2714acb2
clean up
2021-01-13 16:50:28 +07:00
75c58e08e5
add f746nucleo to group f7
2021-01-13 16:41:00 +07:00
6eba383009
add f746disco into f7 group
2021-01-13 16:34:42 +07:00
39d2c219b5
add stlinkv3mini to f7 group
2021-01-13 15:52:54 +07:00
fecad9bab4
add stm32f769disco into f7 family
2021-01-13 14:17:15 +07:00
e252fade2c
add f767nucleo to stm32f7 group
2021-01-13 13:46:21 +07:00
55566bb188
adding stm32f7 family
2021-01-13 13:20:09 +07:00
fc69dd70cf
Changed some source file paths for SRC_C to relative paths.
...
Added statements to validate GCCVERSION on Windows Command Prompt.
2021-01-12 01:02:17 +09:00
f4300afb1c
moving sct neopixel driver to shared library
2021-01-10 18:31:40 +00:00
5ca7c285f5
moved neopixel to its own files with additional features
2021-01-10 05:17:49 +00:00
0f11858b0e
working neopixel minor refactor
2021-01-03 23:26:54 +00:00
33f0d4b314
working neopixel
2021-01-03 23:01:18 +00:00
f44c588dd7
8 state implementation, still not working
2021-01-03 18:53:55 +00:00
7f98d11454
24 state implementation, only upsdates first LED
2021-01-03 18:31:45 +00:00
06642910f4
neopixel driver one byte at a time non-func
2021-01-03 18:11:13 +00:00
56acdf67ba
adding double_m33_express board
2021-01-02 22:53:15 +00:00
3951a940fd
update readme, contributor and doc for new port KL25
...
update nxp_driver
2020-12-25 23:10:57 +07:00
2bbfc56bd8
added support for frdm_kl25z
2020-12-18 00:07:50 +09:00
e9e3000ff9
clean up
2020-11-30 09:41:01 +07:00
0dd78aa916
group all stm32f4 boards
2020-11-29 22:48:21 +07:00
daf9d06c0e
move teensy 4.0 to imxrt
2020-11-29 20:44:35 +07:00
2dec21f81b
complete grouping imxrt boards
2020-11-29 20:41:30 +07:00
89205438c2
move xiao to samd21 group
2020-11-29 17:09:53 +07:00
a6c7467fd3
grouping samd51 boards
2020-11-28 12:10:29 +07:00
a3fff24fbc
group more nrf board
2020-11-28 11:54:53 +07:00
50977eef0e
grouping more samd21 boards
2020-11-28 11:45:24 +07:00
fac9151c73
grouping samd21
2020-11-28 11:11:55 +07:00
630692d81b
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
f0ffe7b984
group more nrf52840 boards
2020-11-28 01:06:10 +07:00
658194ccc4
group more nrf boards
2020-11-28 00:45:44 +07:00
4130c50b01
grouping nrf boards
2020-11-28 00:16:28 +07:00
b572983cc8
group esp32s2 board into its group
2020-11-27 22:31:47 +07:00
496c7c701a
fix ci
2020-11-09 01:23:19 +07:00
7ab3da1e03
same70 xplained uart via edbg work with board_test
2020-11-09 01:01:05 +07:00
89b92b54a7
same70 xplained led and button works wiht board_test example
2020-11-09 00:13:56 +07:00
5456afa8ee
update microchipo driver submodule
2020-11-08 18:09:53 +07:00
a708ab6254
Merge pull request #553 from hathach/host-async-control
...
Host async control
2020-11-07 10:52:14 +07:00
958a4e1b5d
use same51 driver to adafruit asf4 submodule
2020-11-02 15:44:12 +07:00
1e7af854c2
remove st_driver submodule
2020-10-30 14:21:29 +07:00
a6efe475e7
use cmsis 5 for all stm32
2020-10-30 14:14:28 +07:00
6e7f2064cf
add more stm mcu
2020-10-30 14:05:01 +07:00
3b890d2391
l4 use offical st driver repo
2020-10-30 14:01:05 +07:00
ac231d7b2d
l0 use offical st driver repo
2020-10-30 13:40:20 +07:00
3659d8e89a
h7 use offical st driver repo
2020-10-30 13:28:14 +07:00
b9ca7e91df
f7 use offical st driver repo
2020-10-30 13:20:09 +07:00
1e02f6e066
f3 use offical st driver repo
2020-10-30 13:11:23 +07:00
bbcf2d7e01
f2 use offical st driver repo
2020-10-30 13:01:01 +07:00
8850ea90b4
f1 use offical st driver repo
2020-10-30 12:55:54 +07:00
092f7baec0
random clean up
2020-10-30 12:49:43 +07:00
41a36b1256
f0 use offical st driver repo
2020-10-30 12:48:34 +07:00
e4eb2de401
f4 use offical st driver repo
2020-10-30 12:15:04 +07:00
042ca2375e
bsp: atsamd21_xpro: removed no longer needed workaround
2020-10-14 09:15:26 -05:00
e10358bfab
bsp: add ATSAMD21-XPRO eval board
2020-10-11 12:06:15 -05:00
b5d4c8185d
Merge branch 'master' into host-async-control
2020-10-11 16:22:12 +07:00
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
7fda95f508
Remap USB IRQs on STM32F303 BSP
2020-10-11 09:27:43 +02:00
b8e7e2b7c9
update microchip driver
...
also skip audio_test for same5x for now due to assert() macro conflict
2020-10-11 13:33:06 +07:00
89bf4fa04c
Merge branch 'master' into house-keeping
2020-10-09 13:49:05 +07:00
344d589a35
use pyocd for iMXRT boards
2020-10-09 13:48:08 +07:00
6f8d0d2c34
Merge pull request #531 from majbthrd/mimxrt1010stack
...
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-09 00:48:08 +07:00
e8b3af038e
add flash-pyocd support
2020-10-08 17:19:48 +07:00
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
30c23719f6
Merge pull request #528 from jgressmann/port-atsame51-to-tinyusb
...
Adds files for the open source D5035-01 hardware
2020-10-08 13:46:41 +07:00
ed94e944c9
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-07 13:15:58 -05:00
3295b5692b
D5035-01 bsp: fix typo
2020-10-07 19:27:55 +02:00
f02b5bfdfa
Address various issues raised by TinyUSB maintainers
...
- remove OPT_MCU_SAME51 in favor of OPT_MCU_SAME5X and working around
differences in the Atmel bsp locally in the D5035-01 bsp.
- rename board folder to d5035_01 for consistency with other boards
2020-10-07 19:19:30 +02:00
d407341d1e
fix usb pin config with idf latest
2020-10-07 19:15:53 +07:00
f92fe1e23e
D5035-01: more natural Makefile variable use
2020-10-06 17:39:36 +02:00
1730a5dcba
D5035-01 bsp: fix paths, default to hw rev 1 (automated build)
2020-10-05 20:30:04 +02:00
862f6ac81e
Update Microchip submodule commit
2020-10-05 20:17:27 +02:00
61aacf07d6
Adds files for the open source D5035-01 hardware
...
The board's files are here:
https://github.com/RudolphRiedel/USB_CAN-FD
2020-10-05 18:35:35 +02:00
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
10d5dac913
update doc
2020-09-04 11:20:09 +07:00
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
c7d2d0ae29
ohci work, tested with lpc1769
2020-09-02 01:40:04 +07:00
52b5748e8d
fix ci build
2020-09-02 00:56:43 +07:00
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
f4e3c6fd8e
clean up
2020-09-01 17:12:31 +07:00
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
7a443d6bea
add itsybitsy nrf52840 board support
2020-08-27 16:40:24 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
91f7ce9769
add support for SAMD11 devices / add samd11_xplained board
2020-08-21 13:15:07 -06:00
76fe8ac612
fix samg55 ci build
2020-08-21 12:19:38 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
798fad397a
Merge pull request #464 from hathach/improve-highspeed
...
Better support highspeed mode
2020-07-19 13:24:57 +07:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
9181ce55fb
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-14 21:51:31 -06:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
0477446224
more clean up
2020-06-30 16:31:59 +07:00
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
2b9466dbc0
Merge pull request #445 from hathach/add-kaluga-bsp
...
added esp32s2 kaluga bsp
2020-06-29 19:16:09 +07:00
2dff40236c
add kaluga files
2020-06-29 18:40:23 +07:00
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
8e143fc962
Add board support for Dialog DA1469x-dk-pro
...
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00
7c94176b4b
Update NRFX to v2.2.0
2020-06-24 15:07:28 +02:00
hathach