Rework rp2040 examples and CMake build:
- Examples should be CMake buildable from their own subdirectory; such a build will error out based on matching .skip.MCU_xxx or a mismatched .only.MCU_ - It should be possible to build from a higher level and use .skip.MCU_ and .only.MCU_ to filter which examples get built - The intention is for the CMakeLists.txts in the examples to be non family specific and without MCU based IFs. I have started this work, but am not really sure the state of the esp32 stuff; in any case the plan is to have everything encapsulated in the FAMILY/family.cmake - pico_examples now just includes examples/device/CMakeLists.txt and examples/host/CMakeLists.txt directly, as they also build correctly when included from there. Note that .skip.MCU_ for esp32 in the directories it wasn't previously avaiable has not been added, as the .skip is common to the regular Makefile builds also. It isn't clear whether these examples should build for esp32, but if not .skip should be added.
This commit is contained in:
parent
edbccb5e19
commit
95f2478146
|
@ -0,0 +1,27 @@
|
|||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
project(tinyusb_device_examples)
|
||||
family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# family_add_subdirectory will filter what to actually add based on selected FAMILY
|
||||
family_add_subdirectory(audio_4_channel_mic)
|
||||
family_add_subdirectory(audio_test)
|
||||
family_add_subdirectory(board_test)
|
||||
family_add_subdirectory(cdc_dual_ports)
|
||||
family_add_subdirectory(cdc_msc)
|
||||
family_add_subdirectory(cdc_msc_freertos)
|
||||
family_add_subdirectory(dfu)
|
||||
family_add_subdirectory(dfu_runtime)
|
||||
family_add_subdirectory(dynamic_configuration)
|
||||
family_add_subdirectory(hid_composite)
|
||||
family_add_subdirectory(hid_composite_freertos)
|
||||
family_add_subdirectory(hid_generic_inout)
|
||||
family_add_subdirectory(hid_multiple_interface)
|
||||
family_add_subdirectory(midi_test)
|
||||
family_add_subdirectory(msc_dual_lun)
|
||||
family_add_subdirectory(net_lwip_webserver)
|
||||
family_add_subdirectory(uac2_headset)
|
||||
family_add_subdirectory(usbtmc)
|
||||
family_add_subdirectory(webusb_serial)
|
|
@ -1,37 +1,28 @@
|
|||
# use BOARD-Directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
||||
|
|
|
@ -1,37 +1,28 @@
|
|||
# use BOARD-Directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,44 +1,41 @@
|
|||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# use BOARD-Directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY MATCHES "^esp32s[2-3]")
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
# use BOARD-Directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
elseif(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
else()
|
||||
|
||||
# Family chooses name based on passed name and vars (e.g. <BOARD>-<DIR_NAME>)
|
||||
get_filename_component(DIR_NAME ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
family_get_project_name(PROJECT "${DIR_NAME}")
|
||||
|
||||
project(${PROJECT})
|
||||
|
||||
add_executable(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
)
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
)
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
||||
endif()
|
||||
|
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,38 +1,29 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,38 +1,29 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,38 +1,29 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,84 +1,82 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# lwip Stack source
|
||||
set(SRC_LWIP
|
||||
${TOP}/lib/lwip/src/core/altcp.c
|
||||
${TOP}/lib/lwip/src/core/altcp_alloc.c
|
||||
${TOP}/lib/lwip/src/core/altcp_tcp.c
|
||||
${TOP}/lib/lwip/src/core/def.c
|
||||
${TOP}/lib/lwip/src/core/dns.c
|
||||
${TOP}/lib/lwip/src/core/inet_chksum.c
|
||||
${TOP}/lib/lwip/src/core/init.c
|
||||
${TOP}/lib/lwip/src/core/ip.c
|
||||
${TOP}/lib/lwip/src/core/mem.c
|
||||
${TOP}/lib/lwip/src/core/memp.c
|
||||
${TOP}/lib/lwip/src/core/netif.c
|
||||
${TOP}/lib/lwip/src/core/pbuf.c
|
||||
${TOP}/lib/lwip/src/core/raw.c
|
||||
${TOP}/lib/lwip/src/core/stats.c
|
||||
${TOP}/lib/lwip/src/core/sys.c
|
||||
${TOP}/lib/lwip/src/core/tcp.c
|
||||
${TOP}/lib/lwip/src/core/tcp_in.c
|
||||
${TOP}/lib/lwip/src/core/tcp_out.c
|
||||
${TOP}/lib/lwip/src/core/timeouts.c
|
||||
${TOP}/lib/lwip/src/core/udp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/autoip.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/dhcp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/etharp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/icmp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/igmp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c
|
||||
${TOP}/lib/lwip/src/netif/ethernet.c
|
||||
${TOP}/lib/lwip/src/netif/slipif.c
|
||||
${TOP}/lib/lwip/src/apps/http/httpd.c
|
||||
${TOP}/lib/lwip/src/apps/http/fs.c
|
||||
${TOP}/lib/networking/dhserver.c
|
||||
${TOP}/lib/networking/dnserver.c
|
||||
${TOP}/lib/networking/rndis_reports.c
|
||||
)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
${SRC_LWIP}
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
${TOP}/lib/lwip/src/include
|
||||
${TOP}/lib/lwip/src/include/ipv4
|
||||
${TOP}/lib/lwip/src/include/lwip/apps
|
||||
${TOP}/lib/networking
|
||||
)
|
||||
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${TOP}/lib/lwip/src/core/altcp.c
|
||||
${TOP}/lib/lwip/src/core/altcp_alloc.c
|
||||
${TOP}/lib/lwip/src/core/altcp_tcp.c
|
||||
${TOP}/lib/lwip/src/core/def.c
|
||||
${TOP}/lib/lwip/src/core/dns.c
|
||||
${TOP}/lib/lwip/src/core/inet_chksum.c
|
||||
${TOP}/lib/lwip/src/core/init.c
|
||||
${TOP}/lib/lwip/src/core/ip.c
|
||||
${TOP}/lib/lwip/src/core/mem.c
|
||||
${TOP}/lib/lwip/src/core/memp.c
|
||||
${TOP}/lib/lwip/src/core/netif.c
|
||||
${TOP}/lib/lwip/src/core/pbuf.c
|
||||
${TOP}/lib/lwip/src/core/raw.c
|
||||
${TOP}/lib/lwip/src/core/stats.c
|
||||
${TOP}/lib/lwip/src/core/sys.c
|
||||
${TOP}/lib/lwip/src/core/tcp.c
|
||||
${TOP}/lib/lwip/src/core/tcp_in.c
|
||||
${TOP}/lib/lwip/src/core/tcp_out.c
|
||||
${TOP}/lib/lwip/src/core/timeouts.c
|
||||
${TOP}/lib/lwip/src/core/udp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/autoip.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/dhcp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/etharp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/icmp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/igmp.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c
|
||||
${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c
|
||||
${TOP}/lib/lwip/src/netif/ethernet.c
|
||||
${TOP}/lib/lwip/src/netif/slipif.c
|
||||
${TOP}/lib/lwip/src/apps/http/httpd.c
|
||||
${TOP}/lib/lwip/src/apps/http/fs.c
|
||||
${TOP}/lib/networking/dhserver.c
|
||||
${TOP}/lib/networking/dnserver.c
|
||||
${TOP}/lib/networking/rndis_reports.c
|
||||
)
|
||||
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
PBUF_POOL_SIZE=2
|
||||
TCP_WND=2*TCP_MSS
|
||||
HTTPD_USE_CUSTOM_FSDATA=0
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
${TOP}/lib/lwip/src/include
|
||||
${TOP}/lib/lwip/src/include/ipv4
|
||||
${TOP}/lib/lwip/src/include/lwip/apps
|
||||
${TOP}/lib/networking
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
PBUF_POOL_SIZE=2
|
||||
TCP_WND=2*TCP_MSS
|
||||
HTTPD_USE_CUSTOM_FSDATA=0
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
|
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,38 +1,29 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
project(${PROJECT})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c
|
||||
)
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -1,37 +1,28 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_device_example(${PROJECT})
|
|
@ -0,0 +1,9 @@
|
|||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
project(tinyusb_host_examples)
|
||||
family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# family_add_subdirectory will filter what to actually add based on selected FAMILY
|
||||
family_add_subdirectory(cdc_msc_hid)
|
|
@ -1,38 +1,29 @@
|
|||
# use directory name for project id
|
||||
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
|
||||
set(PROJECT ${BOARD}-${PROJECT})
|
||||
cmake_minimum_required(VERSION 3.5)
|
||||
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake)
|
||||
|
||||
# Check for -DFAMILY=
|
||||
if(FAMILY STREQUAL "rp2040")
|
||||
cmake_minimum_required(VERSION 3.12)
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake)
|
||||
project(${PROJECT})
|
||||
add_executable(${PROJECT})
|
||||
# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>)
|
||||
family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
|
||||
project(${PROJECT})
|
||||
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
|
||||
)
|
||||
# Checks this example is valid for the family and initializes the project
|
||||
family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
|
||||
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
add_executable(${PROJECT})
|
||||
|
||||
# Example defines
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_OS=OPT_OS_PICO
|
||||
)
|
||||
# Example source
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c
|
||||
)
|
||||
|
||||
else()
|
||||
message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}")
|
||||
endif()
|
||||
# Example include
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${CMAKE_CURRENT_SOURCE_DIR}/src
|
||||
)
|
||||
|
||||
# Configure compilation flags and libraries for the example... see the corresponding function
|
||||
# in hw/bsp/FAMILY/family.cmake for details.
|
||||
family_configure_host_example(${PROJECT})
|
|
@ -4,3 +4,7 @@ cmake_minimum_required(VERSION 3.5)
|
|||
set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components")
|
||||
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
||||
set(SUPPORTED_TARGETS esp32s2)
|
||||
|
||||
# include basic family CMake functionality
|
||||
set(FAMILY_MCUS esp32s2 ESP32S2)
|
||||
include(${CMAKE_CURRENT_LIST_DIR}/../family.cmake)
|
||||
|
|
|
@ -4,3 +4,7 @@ cmake_minimum_required(VERSION 3.5)
|
|||
set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components")
|
||||
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
||||
set(SUPPORTED_TARGETS esp32s3)
|
||||
|
||||
# include basic family CMake functionality
|
||||
set(FAMILY_MCUS esp32s3 ESP32S3) # TODO MERGE THIS WITH supported targets?
|
||||
include(${CMAKE_CURRENT_LIST_DIR}/../family.cmake)
|
||||
|
|
|
@ -0,0 +1,61 @@
|
|||
if (NOT FAMILY_MCUS)
|
||||
set(FAMILY_MCUS ${FAMILY})
|
||||
endif()
|
||||
|
||||
# save it in case of re-inclusion
|
||||
set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "")
|
||||
|
||||
function(family_filter RESULT DIR)
|
||||
get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR})
|
||||
file(GLOB ONLYS "${DIR}/.only.MCU_*")
|
||||
if (ONLYS)
|
||||
foreach(MCU IN LISTS FAMILY_MCUS)
|
||||
if (EXISTS ${DIR}/.only.MCU_${MCU})
|
||||
set(${RESULT} 1 PARENT_SCOPE)
|
||||
return()
|
||||
endif()
|
||||
endforeach()
|
||||
else()
|
||||
foreach(MCU IN LISTS FAMILY_MCUS)
|
||||
if (EXISTS ${DIR}/.skip.MCU_${MCU})
|
||||
set(${RESULT} 0 PARENT_SCOPE)
|
||||
return()
|
||||
endif()
|
||||
endforeach()
|
||||
endif()
|
||||
set(${RESULT} 1 PARENT_SCOPE)
|
||||
endfunction()
|
||||
|
||||
function(family_add_subdirectory DIR)
|
||||
family_filter(SHOULD_ADD "${DIR}")
|
||||
if (SHOULD_ADD)
|
||||
add_subdirectory(${DIR})
|
||||
endif()
|
||||
endfunction()
|
||||
|
||||
function(family_get_project_name OUTPUT_NAME DIR)
|
||||
get_filename_component(SHORT_NAME ${DIR} NAME)
|
||||
if (TINYUSB_FAMILY_PROJECT_NAME_INCLUDES_BOARD OR NOT DEFINED TINYUSB_FAMILY_PROJECT_NAME_INCLUDES_BOARD)
|
||||
set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${BOARD}-${SHORT_NAME} PARENT_SCOPE)
|
||||
else()
|
||||
set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE)
|
||||
endif()
|
||||
endfunction()
|
||||
|
||||
function(family_initialize_project PROJECT DIR)
|
||||
family_filter(ALLOWED "${DIR}")
|
||||
if (NOT ALLOWED)
|
||||
get_filename_component(SHORT_NAME ${DIR} NAME)
|
||||
message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}")
|
||||
endif()
|
||||
endfunction()
|
||||
|
||||
# configure an executable target to link to tinyusb in device mode, and add the board implementation
|
||||
function(family_configure_device_example TARGET)
|
||||
# default implentation is empty, the function should be redefined in the FAMILY/family.cmake
|
||||
endfunction()
|
||||
|
||||
# configure an executable target to link to tinyusb in host mode, and add the board implementation
|
||||
function(family_configure_host_example TARGET)
|
||||
# default implentation is empty, the function should be redefined in the FAMILY/family.cmake
|
||||
endfunction()
|
|
@ -31,16 +31,20 @@
|
|||
extern "C" {
|
||||
#endif
|
||||
|
||||
#ifdef PICO_DEFAULT_LED_PIN
|
||||
#define LED_PIN PICO_DEFAULT_LED_PIN
|
||||
#define LED_STATE_ON 1
|
||||
#define LED_STATE_ON (!(PICO_DEFAULT_LED_PIN_INVERTED))
|
||||
#endif
|
||||
|
||||
// Button pin is BOOTSEL which is flash CS pin
|
||||
#define BUTTON_BOOTSEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
#define UART_DEV uart0
|
||||
#define UART_TX_PIN 0
|
||||
#define UART_RX_PIN 1
|
||||
#if defined(PICO_DEFAULT_UART_TX_PIN) && defined(PICO_DEFAULT_UART_RX_PIN) && defined(PICO_DEFAULT_UART)
|
||||
#define UART_DEV PICO_DEFAULT_UART
|
||||
#define UART_TX_PIN PICO_DEFAULT_UART_TX_PIN
|
||||
#define UART_RX_PIN PICO_DEFAULT_UART_RX_PIN
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
|
@ -1 +0,0 @@
|
|||
set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_generic_03h.S")
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define LED_PIN 13
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define NEOPIXEL_PIN 16
|
||||
#define NEOPIXEL_POWER_PIN 17
|
||||
#define NEOPIXEL_POWER_STATE 1
|
||||
|
||||
// Button pin is BOOTSEL which is flash CS pin
|
||||
#define BUTTON_BOOTSEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
#define UART_DEV uart0
|
||||
#define UART_TX_PIN 0
|
||||
#define UART_RX_PIN 1
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
|
@ -1 +0,0 @@
|
|||
set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S")
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define LED_PIN 11
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define NEOPIXEL_PIN 17
|
||||
#define NEOPIXEL_POWER_PIN 16
|
||||
#define NEOPIXEL_POWER_STATE 1
|
||||
|
||||
// Button pin is BOOTSEL which is flash CS pin
|
||||
#define BUTTON_BOOTSEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
#define UART_DEV uart0
|
||||
#define UART_TX_PIN 0
|
||||
#define UART_RX_PIN 1
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
|
@ -1 +0,0 @@
|
|||
set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S")
|
|
@ -1,55 +0,0 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// TODO QT RP2040 only has neopixel
|
||||
#define LED_PIN 11
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define NEOPIXEL_PIN 12
|
||||
#define NEOPIXEL_POWER_PIN 11
|
||||
#define NEOPIXEL_POWER_STATE 1
|
||||
|
||||
// Button pin is BOOTSEL which is flash CS pin
|
||||
#define BUTTON_BOOTSEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
|
||||
#define UART_DEV uart0
|
||||
#define UART_TX_PIN 0
|
||||
#define UART_RX_PIN 1
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
|
@ -1 +0,0 @@
|
|||
set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S")
|
|
@ -26,6 +26,7 @@
|
|||
*/
|
||||
|
||||
#include "pico/stdlib.h"
|
||||
#include "pico/binary_info.h"
|
||||
#include "hardware/gpio.h"
|
||||
#include "hardware/sync.h"
|
||||
#include "hardware/structs/ioqspi.h"
|
||||
|
@ -110,10 +111,14 @@ void stdio_rtt_init(void)
|
|||
|
||||
#endif
|
||||
|
||||
#ifdef UART_DEV
|
||||
static uart_inst_t *uart_inst;
|
||||
#endif
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#ifdef LED_PIN
|
||||
bi_decl(bi_1pin_with_name(LED_PIN, "LED"));
|
||||
gpio_init(LED_PIN);
|
||||
gpio_set_dir(LED_PIN, GPIO_OUT);
|
||||
#endif
|
||||
|
@ -123,7 +128,9 @@ void board_init(void)
|
|||
#endif
|
||||
|
||||
#ifdef UART_DEV
|
||||
stdio_uart_init_full(UART_DEV, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN);
|
||||
bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART));
|
||||
uart_inst = uart_get_instance(UART_DEV);
|
||||
stdio_uart_init_full(uart_inst, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN);
|
||||
#endif
|
||||
|
||||
#if defined(LOGGER_RTT)
|
||||
|
@ -164,7 +171,7 @@ int board_uart_read(uint8_t* buf, int len)
|
|||
{
|
||||
#ifdef UART_DEV
|
||||
for(int i=0;i<len;i++) {
|
||||
buf[i] = uart_getc(UART_DEV);
|
||||
buf[i] = uart_getc(uart_inst);
|
||||
}
|
||||
return len;
|
||||
#else
|
||||
|
@ -175,9 +182,9 @@ int board_uart_read(uint8_t* buf, int len)
|
|||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
#ifdef UART_DEV
|
||||
char const* bufch = (uint8_t const*) buf;
|
||||
char const* bufch = (char const*) buf;
|
||||
for(int i=0;i<len;i++) {
|
||||
uart_putc(UART_DEV, bufch[i]);
|
||||
uart_putc(uart_inst, bufch[i]);
|
||||
}
|
||||
return len;
|
||||
#else
|
||||
|
|
|
@ -1,77 +1,69 @@
|
|||
# Board specific define e.g boot stage2
|
||||
# PICO_DEFAULT_BOOT_STAGE2_FILE must be set before pico_sdk_init()
|
||||
include(${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake)
|
||||
cmake_minimum_required(VERSION 3.13)
|
||||
if (NOT TARGET _rp2040_family_inclusion_marker)
|
||||
add_library(_rp2040_family_inclusion_marker INTERFACE)
|
||||
|
||||
pico_sdk_init()
|
||||
# include basic family CMake functionality
|
||||
set(FAMILY_MCUS RP2040 rp2040)
|
||||
include(${CMAKE_CURRENT_LIST_DIR}/../family.cmake)
|
||||
|
||||
target_link_libraries(${PROJECT}
|
||||
pico_stdlib
|
||||
pico_bootsel_via_double_reset
|
||||
pico_fix_rp2040_usb_device_enumeration
|
||||
)
|
||||
if (BOARD AND NOT PICO_BOARD)
|
||||
message("Defaulting PICO_BOARD from BOARD ('${BOARD}')")
|
||||
set(PICO_BOARD ${BOARD})
|
||||
endif()
|
||||
|
||||
pico_add_extra_outputs(${PROJECT})
|
||||
pico_enable_stdio_uart(${PROJECT} 1)
|
||||
# add the SDK in case we are standalone tinyusb example (noop if already present)
|
||||
include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake)
|
||||
set(BOARD ${PICO_BOARD})
|
||||
|
||||
# TinyUSB Stack source
|
||||
set(SRC_TINYUSB
|
||||
${TOP}/src/tusb.c
|
||||
${TOP}/src/common/tusb_fifo.c
|
||||
${TOP}/src/device/usbd.c
|
||||
${TOP}/src/device/usbd_control.c
|
||||
${TOP}/src/class/audio/audio_device.c
|
||||
${TOP}/src/class/cdc/cdc_device.c
|
||||
${TOP}/src/class/dfu/dfu_device.c
|
||||
${TOP}/src/class/dfu/dfu_rt_device.c
|
||||
${TOP}/src/class/hid/hid_device.c
|
||||
${TOP}/src/class/midi/midi_device.c
|
||||
${TOP}/src/class/msc/msc_device.c
|
||||
${TOP}/src/class/net/net_device.c
|
||||
${TOP}/src/class/usbtmc/usbtmc_device.c
|
||||
${TOP}/src/class/vendor/vendor_device.c
|
||||
${TOP}/src/host/hub.c
|
||||
${TOP}/src/host/usbh.c
|
||||
${TOP}/src/host/usbh_control.c
|
||||
${TOP}/src/class/cdc/cdc_host.c
|
||||
${TOP}/src/class/hid/hid_host.c
|
||||
${TOP}/src/class/msc/msc_host.c
|
||||
${TOP}/src/portable/raspberrypi/${FAMILY}/rp2040_usb.c
|
||||
${TOP}/src/portable/raspberrypi/${FAMILY}/dcd_rp2040.c
|
||||
${TOP}/src/portable/raspberrypi/${FAMILY}/hcd_rp2040.c
|
||||
)
|
||||
# TOP is absolute path to root directory of TinyUSB git repo
|
||||
set(TOP "../../..")
|
||||
get_filename_component(TOP "${TOP}" REALPATH)
|
||||
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${TOP}/hw/bsp/${FAMILY}/family.c
|
||||
${SRC_TINYUSB}
|
||||
)
|
||||
# tinyusb_additions will hold our extra settings libraries
|
||||
add_library(tinyusb_additions INTERFACE)
|
||||
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${TOP}/hw
|
||||
${TOP}/src
|
||||
${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}
|
||||
)
|
||||
target_compile_definitions(tinyusb_additions INTERFACE
|
||||
PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
|
||||
)
|
||||
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
CFG_TUSB_MCU=OPT_MCU_RP2040
|
||||
PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
|
||||
)
|
||||
if(DEFINED LOG)
|
||||
target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG} )
|
||||
endif()
|
||||
|
||||
if(DEFINED LOG)
|
||||
target_compile_definitions(${PROJECT} PUBLIC CFG_TUSB_DEBUG=${LOG} )
|
||||
if(LOGGER STREQUAL "rtt")
|
||||
target_compile_definitions(tinyusb_additions INTERFACE
|
||||
LOGGER_RTT
|
||||
SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
|
||||
)
|
||||
|
||||
target_sources(tinyusb_additions INTERFACE
|
||||
${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
|
||||
)
|
||||
|
||||
target_include_directories(tinyusb_additions INTERFACE
|
||||
${TOP}/lib/SEGGER_RTT/RTT
|
||||
)
|
||||
endif()
|
||||
|
||||
function(family_configure_target TARGET)
|
||||
pico_add_extra_outputs(${TARGET})
|
||||
pico_enable_stdio_uart(${TARGET} 1)
|
||||
target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions)
|
||||
endfunction()
|
||||
|
||||
function(family_configure_device_example TARGET)
|
||||
family_configure_target(${TARGET})
|
||||
target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device)
|
||||
endfunction()
|
||||
|
||||
function(family_configure_host_example TARGET)
|
||||
family_configure_target(${TARGET})
|
||||
target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host)
|
||||
endfunction()
|
||||
|
||||
function(family_initialize_project PROJECT DIR)
|
||||
_family_initialize_project(${PROJECT} ${DIR})
|
||||
enable_language(C CXX ASM)
|
||||
pico_sdk_init()
|
||||
endfunction()
|
||||
endif()
|
||||
|
||||
if(LOGGER STREQUAL "rtt")
|
||||
target_compile_definitions(${PROJECT} PUBLIC
|
||||
LOGGER_RTT
|
||||
SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
|
||||
)
|
||||
|
||||
target_sources(${PROJECT} PUBLIC
|
||||
${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
|
||||
)
|
||||
|
||||
target_include_directories(${PROJECT} PUBLIC
|
||||
${TOP}/lib/SEGGER_RTT/RTT
|
||||
)
|
||||
endif()
|
||||
|
||||
|
|
|
@ -1 +1 @@
|
|||
Subproject commit f7087f04783c896627061fc151fa3527b73733c7
|
||||
Subproject commit 66b5a11995025426224e0ba6f377322e6e8893b6
|
|
@ -1 +1 @@
|
|||
Subproject commit 2ec2a1538362696118dc3fdf56f33dacaf8f4067
|
||||
Subproject commit b473b28a14a03f3d416b6e2c071bcfd4fb92cb63
|
2
lib/lwip
2
lib/lwip
|
@ -1 +1 @@
|
|||
Subproject commit 159e31b689577dbf69cf0683bbaffbd71fa5ee10
|
||||
Subproject commit 0192fe773ec28e11f66ec76f4e827fbb58b7e257
|
Loading…
Reference in New Issue