kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

get board_test running with pico on both led and button

This commit is contained in:
hathach 2021-01-23 00:12:10 +07:00
parent b6e9c42b02
commit b8847de802
2 changed files with 88 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
examples/device/board_test/CMakeLists.txt
View File

@ -4,13 +4,40 @@ cmake_minimum_required(VERSION 3.5)
set(TOP "../../..")
get_filename_component(TOP "${TOP}" REALPATH)
set(PROJECT board_test)
# Check for -DFAMILY=
if(NOT DEFINED FAMILY)
message(FATAL_ERROR "Invalid FAMILY specified")
endif()
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
project(${PROJECT})
project(board_test)
if(FAMILY STREQUAL "rp2040")
include(${TOP}/hw/bsp/${FAMILY}/family_extra.cmake OPTIONAL)
pico_sdk_init()
add_executable(${PROJECT})
target_sources(${PROJECT} PRIVATE
src/main.c
"${TOP}/hw/bsp/rp2040/boards/raspberry_pi_pico/board_raspberry_pi_pico.c"
)
target_include_directories(${PROJECT} PRIVATE
"src/"
"${TOP}/hw"
"${TOP}/src"
)
target_compile_definitions(${PROJECT} PUBLIC
CFG_TUSB_MCU=OPT_MCU_RP2040
CFG_TUSB_OS=OPT_OS_PICO
)
target_link_libraries(${PROJECT} pico_stdlib)
pico_add_extra_outputs(${PROJECT})
endif()

74
hw/bsp/rp2040/boards/raspberry_pi_pico/board_raspberry_pi_pico.c
View File

@ -25,21 +25,73 @@
*/
#include "pico/stdlib.h"
#include "../board.h"
#include "hardware/gpio.h"
#include "hardware/sync.h"
#include "hardware/structs/ioqspi.h"
#include "hardware/structs/sio.h"
#ifndef LED_PIN
#define LED_PIN PICO_DEFAULT_LED_PIN
#endif
#include "bsp/board.h"
#define LED_PIN PICO_DEFAULT_LED_PIN
#define LED_STATE_ON 1
// Button pin is BOOTSEL which is flash CS pin
// #define BUTTON_PIN
#define BUTTON_STATE_ACTIVE 0
// This example blinks the Picoboard LED when the BOOTSEL button is pressed.
//
// Picoboard has a button attached to the flash CS pin, which the bootrom
// checks, and jumps straight to the USB bootcode if the button is pressed
// (pulling flash CS low). We can check this pin in by jumping to some code in
// SRAM (so that the XIP interface is not required), floating the flash CS
// pin, and observing whether it is pulled low.
//
// This doesn't work if others are trying to access flash at the same time,
// e.g. XIP streamer, or the other core.
bool __no_inline_not_in_flash_func(get_bootsel_button)() {
const uint CS_PIN_INDEX = 1;
// Must disable interrupts, as interrupt handlers may be in flash, and we
// are about to temporarily disable flash access!
uint32_t flags = save_and_disable_interrupts();
// Set chip select to Hi-Z
hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl,
GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB,
IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS);
// Note we can't call into any sleep functions in flash right now
for (volatile int i = 0; i < 1000; ++i);
// The HI GPIO registers in SIO can observe and control the 6 QSPI pins.
// Note the button pulls the pin *low* when pressed.
bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX));
// Need to restore the state of chip select, else we are going to have a
// bad time when we return to code in flash!
hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl,
GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB,
IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS);
restore_interrupts(flags);
return button_state;
}
void board_init(void)
{
setup_default_uart();
gpio_init(LED_PIN);
gpio_set_dir(LED_PIN, 1);
gpio_set_dir(LED_PIN, GPIO_OUT);
// Button
// todo probably set up device mode?
#if TUSB_OPT_DEVICE_ENABLED
#endif
#if TUSB_OPT_HOST_ENABLED
// set portfunc to host !!!
@ -66,12 +118,12 @@ void board_init(void)
void board_led_write(bool state)
{
gpio_put(LED_PIN, state);
gpio_put(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
return 0;
return BUTTON_STATE_ACTIVE == get_bootsel_button();
}
int board_uart_read(uint8_t* buf, int len)
@ -84,16 +136,8 @@ int board_uart_read(uint8_t* buf, int len)
int board_uart_write(void const * buf, int len)
{
// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
for(int i=0;i<len;i++) {
uart_putc(uart_default, ((char *)buf)[i]);
}
return 0;
}
#if CFG_TUSB_OS == OPT_OS_NONE
uint32_t board_millis(void)
{
return to_ms_since_boot(get_absolute_time());
}
#endif