aa682d7301
add fix for stm32l4 (version 3.10a) which generate transfer complete when setup recieved and control out data complete
2021-11-02 13:52:30 +07:00
5fb16a8f2c
samd21: enable SysTick only if running w/o OS
2021-11-01 18:01:18 +01:00
ba34f420db
Adds support for Adafruit Trinket M0
2021-10-31 12:34:53 +01:00
4ea8f1441d
correct freertos port for efm32gg
2021-10-31 00:19:17 +07:00
215e0595ab
change F207 to use new dwc2
2021-10-31 00:09:40 +07:00
9cd5a87c64
add support for EFM32GG
...
merge GG12 GG12 to simply OPT_MCU_EFM32GG
2021-10-30 20:42:55 +07:00
19a26729b0
Add Adafruit QT Py board
...
Straight copy of itsybitsy_m0/ with MCU changed to
ATSAMD21E18
LED and button are disabled.
LED is a neopixel so could be added later.
2021-10-29 18:00:23 +08:00
8e95b807f7
samd21: Make LED_PIN and BUTTON_PIN optional
...
Some boards don't have them, just ignore
2021-10-29 13:49:15 +08:00
7def380058
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 12:52:18 +07:00
6a658007a5
Changes to use ft90x-sdk as submodule or installed SDK from toolchain.
2021-10-27 12:30:51 +01:00
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
bb5dab5c2e
add hw config struct
2021-10-26 22:48:01 +07:00
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
32742571da
switch gd32 and stm32f4 to use new dwc2 driver
2021-10-25 00:06:57 +07:00
06de6b725c
adding generalized dwc2 driver
2021-10-24 23:24:46 +07:00
311c05b401
Merge branch 'master' into fix-warnings
2021-10-23 21:23:56 +07:00
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
826b34a8ac
enable -Wnull-dereference
2021-10-18 00:13:40 +07:00
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
a5f516893b
more with -Wcast-qual
2021-10-17 16:36:53 +07:00
0b249618b0
fix -Wcast-qual
2021-10-15 23:54:31 +07:00
7596cb3079
update some sense warning from -Wconversion
2021-10-15 15:54:32 +07:00
06d9555389
More warning cleanup
...
- physically suppress warnings in TinyUSB headers using pragmas so they don't break -Werror compilation of external files that include them
- fix compiler warnings in rp2040 port
- add cmake method to rp2040 port to allow an external project to suppress warnings in TinyUSB itself
2021-10-14 15:23:26 -05:00
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
b26cc2cc46
Add linkermap for size analysis ( #1136 )
...
* add NO_LTO option to make
* add linkermap submodule and linkermap target
* add linkermap to ci build
* linkermap doesn't work with esp32sx map file yet
* add note for linkermap target
2021-10-13 00:57:45 +07:00
379537cb6d
Merge branch 'master' into add_uvc
2021-10-12 22:01:02 +07:00
b6d09ca761
Add compile option to allocate video data into flash in video_capture example
2021-10-09 23:02:18 +09:00
a3a18c9ed3
Change the video image to scrolling color bars.
2021-10-09 19:51:51 +09:00
5e6edecaa3
Streamline settings for board.
2021-10-07 17:00:28 +01:00
8c40a74f29
Sort out board settings.
2021-10-06 17:13:44 +01:00
9966b8a5d6
Change author in header to Bridgetek Pte Ltd.
2021-10-06 16:54:52 +01:00
37c5eeb51d
Rename directories to indicate that FT930 and FT900 devices are both covered by the same SDK and src/portable code. Board makefile includes __FT900__ macro for FT90x and __FT930__ macro for boards with FT93x.
2021-10-06 16:50:55 +01:00
98ab8117d6
USB seems to init ok
2021-10-05 18:20:44 -07:00
62c613f6d2
Add initial port for FT9xx series from Bridgetek.
...
Add FT90X and FT93X to the list of devices in tusb_option.h. 1700 for FT90x and 1701 for FT93x.
Set endpoint attributes for FT90x and FT93x in dcd_attr.h.
Add FT90x routines for USB device in src/portable/bridgetek/ft90x/dcd_ft90x.c
The location for hardware header files and libraries is hw/mcu/bridgetek/ft90x/hardware. There are no files in the repository, but files will be linked as a submodule in the future. The required files can be copied from or linked to the location "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware" once the toolchain is installed.
Makefile for the MM900EV1B board for developing with an FT900 device is present. Use "BOARD=mm900ev1b".
2021-10-05 13:54:47 +01:00
a867d87072
rename CFG_TUD_NET to CFG_TUD_ECM_RNDIS
2021-10-05 16:00:07 +07:00
31cfd5a684
Merge branch 'add_ncm' of https://github.com/majbthrd/tinyusb into majbthrd-add_ncm
2021-10-05 11:39:32 +07:00
0932d502c7
remove bcm files
2021-09-30 14:50:38 -07:00
a1788da410
Add video class entry to rp2040 building scripts
2021-09-30 22:14:29 +09:00
103309b88b
Merge branch 'master' of github.com:hathach/tinyusb into zhangslice-master
...
examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
2021-09-29 15:27:41 +07:00
3eeb79be4f
update mm32sdk submodule
2021-09-29 15:20:14 +07:00
7af57e41b5
add submodule hathach/mm32sdk
2021-09-29 14:58:47 +07:00
bbb68ffefb
remove official mm32sdk submodule
2021-09-29 14:55:20 +07:00
196a0da813
add support for the QMTech ATMSAME70N19A board
2021-09-27 06:13:07 +07:00
03d7988df3
add NCM driver in a compatible manner : hathach/tinyusb#550
2021-09-25 17:05:58 -05:00
73872a5df0
add CFG_TUSB_OS_INC_PATH for os include path
...
useful for freertos/ prefix with esp IDF
2021-09-25 16:16:55 +07:00
0a6ca65e3f
MMU works
2021-09-24 16:14:01 -07:00
417677aae4
da14695_dk_usb: Fix button configuration
...
Unlike da1469x_dk_pro, K1 pin (6) is connected to VCC when
active.
This adds required pull down and reverses active logic state.
2021-09-23 12:52:32 +02:00
dd2a518881
da1469x_dk_pro: Fix button setup
...
Button on board has 1k resistor to ground when pressed.
When not pressed pin 6 is floating.
This forces MCU pull-up for this pin for correct behavior.
2021-09-23 12:00:28 +02:00
829f92d00f
Trying to setup the mmu
2021-09-22 15:19:02 -07:00
3e569f8e79
Merge pull request #1094 from kasjer/kasjer/da146xx-vbus-handling
...
dcd_da146xx: Add VBUS handling
2021-09-18 23:12:40 +07:00
3333703d25
Merge branch 'master' into zhangslice-master
2021-09-18 13:35:26 +07:00
2499c9382d
rpi start. doesn't work
2021-09-17 16:51:34 -07:00
a71ac71d7f
da1469x_dk_xxx: Add VBUS handling
...
Two BSPs with DA146xx MCUs are now adopted to
VBUS handling changed introduced to dcd_da146xx driver.
da14695_dk_usb as bus-powered devices informs driver that
VBUS is present at startup.
da1469x-dk-pro has VBUS change interrupt handler that
informs driver about VBUS changes.
2021-09-17 12:20:57 +02:00
46bb821753
Add J1-19 pin setting as a button
2021-09-15 21:32:53 +09:00
ecbe8c3376
Change default LED state to off
2021-09-15 21:32:53 +09:00
f39656b6d7
Merge branch 'master' of github.com:hathach/tinyusb into kkitayam-impl_close_all_for_khci
2021-09-15 18:29:28 +07:00
1a87b605bd
Add support for Nucleo F412ZG
2021-09-13 13:21:25 +02:00
d7238d9a86
Remove heap memory area
2021-09-10 00:13:29 +09:00
f47e5402fa
add msc workaround for cxd56
2021-09-07 13:30:51 +07:00
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
a05ea0d83b
add CFG_EXAMPLE_MSC_READONLY for curiosity
...
allow family/board to exclude specific example. exclude
net_lwip_webserver from curiosity.
2021-08-29 22:53:16 +07:00
b169db3fd6
Add PYOCD_OPTION
...
Added PYOCD_OPTION to pass board-specific options to build
2021-08-29 22:51:46 +07:00
90af8562b1
Added support for Microchip Curiosity Nano SAMD21 board (DM320119)
...
Added support for Microchip Curiosity Nano SAMD21 board (DM320119) under hw/bsp/samd21/boards/curiosity_nano
The nEDBG on this board requires dap_protocol be specified as SWD (changed in examples/rules.mk)
NOTE: requires entry (03eb:2175) for VID:PID of nEDBG be added to /etc/udev/rules for pyocd
2021-08-29 22:51:46 +07:00
4492a7021c
Merge branch 'master' into merge-waveshare-h7
2021-08-29 21:49:10 +07:00
6159252692
disable systick when running freertos on other stm families
2021-08-29 21:34:10 +07:00
00e66cf2e0
remove old openh743i, explicitly disable systick when using freertos for H7
2021-08-29 21:26:47 +07:00
5bd7788950
cleaned up unused code, only enalbing port clocks as needed
2021-08-23 16:36:58 -07:00
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
eda5b92e92
whitespace
2021-08-19 19:13:47 +07:00
175a6fbc5f
rename to stm32f103_bluepill
2021-08-19 18:53:55 +07:00
ebfd65a9ca
add stm32f103 mini v2.0 board
2021-08-19 18:51:51 +07:00
1992f49343
group stm32f1 board
2021-08-19 18:02:16 +07:00
a9279ece33
merge waveshare to h7 family
2021-08-19 17:27:53 +07:00
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
73f8fae036
change toolchain to riscv-none-embed-gcc-xpack for ci
2021-08-15 17:28:14 +07:00
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
1b6540a61c
Update systick reload value
...
The systick timer is driven by the AHB bus divided by 4, set the correct
reload value to generate a timer irq every ms.
2021-08-09 21:37:06 +02:00
27f147f421
Minor style changes
2021-08-07 14:08:18 +02:00
0399996ee5
Code style changes
2021-08-07 11:33:36 +02:00
66d566f8c0
Use functions provided by the nuclei-sdk hal
2021-08-07 11:33:36 +02:00
60d03110f7
Correctly initialize and handle the system tick
...
Forgot to reload the systick timer in the irq handler
2021-08-07 11:33:36 +02:00
1d2a57a9e1
Remove unsuitable clock configurations from init code
...
Only 48MHz, 72MHz, 96MHz and 120 MHz system clocks derived from an
external crystal are suitable for the usb peripheral, as the internal
oscillator is not stable enough. Also the usb-prescaler only supports
division by 1 (48MHZ), 1.5(72MHz), 2(96MHz) and 2.5(120Mhz).
120Mhz is also out of spec and not added here.
2021-08-07 11:33:36 +02:00
733a362436
Use nuclei-sdk functions for init code
...
Instead of using the HAL functions we can just use the defines from the
board support for the longan nano that comes with the nuclei-sdk. Also
we move some includes and defines to the header file.
2021-08-07 11:32:06 +02:00
6e287a7c5e
Cleanup include paths and use linker files from nuclei-sdk
2021-08-07 09:51:56 +02:00
b473923f42
Remove redundant linker files
...
We use the linker files provided by nuclei-sdk instead
2021-08-07 09:51:16 +02:00
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
e5bd6bdeff
Update nuclei-sdk with __riscv_flen fix
2021-08-03 20:01:10 +02:00
790d90bf26
Set FreeRTOS to RISC-V (doesn't compile)
2021-08-03 20:01:10 +02:00
23e3b1680b
Use JTAG for jlink flashing
2021-08-03 20:01:10 +02:00
3db2089aa9
Minor clean ups
2021-08-03 20:00:39 +02:00
19b971cb24
Add board support for gd32vf103 longan nano
2021-08-03 20:00:39 +02:00
8b5625bf4e
Move clock enable to BSP.
2021-07-30 12:07:23 +02:00
0953be9d7f
Small tidy up for waveshare openh743i BSP.
2021-07-27 12:07:19 +10:00
f01074681a
Added BSP for waveshare openh743i.
2021-07-27 11:58:20 +10:00
1c2bc47c07
Merge pull request #950 from HiFiPhile/dfu
...
DFU improvements
2021-07-22 11:17:01 +07:00
05f59fb8ed
clean up warning
2021-07-19 12:08:01 +07:00
d0dd3c77ff
Use USBHS_Handler
2021-07-18 22:03:45 +02:00
b194aa240b
Merge branch 'master' into dcd_same70
2021-07-17 12:10:35 +02:00
406832158d
skip lto for samd11 build
2021-07-15 21:08:10 +07:00
8de33ca557
Merge branch 'master' into kkitayam-fix_rtt_for_rx_family
2021-07-02 14:10:31 +07:00
ea9ec1fb43
extend stack areas to enable logging
...
add dummy functions to avoid warnings when logging is enable
remove codes regarding OPTLIB
2021-07-02 11:37:23 +09:00
ca98996e1f
better support for hid device set/get protocol
...
add caplock detection for hid_composite
2021-07-01 22:46:39 +07:00
b2fa7358cf
fix typo
2021-06-29 16:38:38 +07:00
2d423514ee
rename rx65n cloud kit to target
...
adding note for adding jlink support for rx65n_target board
2021-06-29 16:33:32 +07:00
01987ef86c
merge saml21 + saml22 = saml2x
2021-06-28 14:37:41 +07:00
7e449b710e
rename bsp saml22 to saml2x
2021-06-28 14:06:13 +07:00
b2feae15e4
Merge pull request #927 from hathach/add-rx65n-board
...
Add rx65n board
2021-06-28 13:53:42 +07:00
856dc0bab9
update doc and clean up
2021-06-28 12:59:53 +07:00
e3b1110cce
rename rx63n to simply rx
2021-06-28 12:51:11 +07:00
8c4641fc05
refactor rx6x bsp
2021-06-28 12:49:30 +07:00
17137bbfff
fix rx65n with freertos build
2021-06-28 12:35:12 +07:00
ec9bfe0333
update renesas rx submodule
2021-06-28 12:27:20 +07:00
239ecadeca
add options for e2l
2021-06-27 23:39:50 +09:00
511b2d47d1
add handling for software configurable interrupts.
2021-06-26 22:42:27 +09:00
60fedaa050
fix baudrate setting
2021-06-26 21:13:35 +09:00
dccb3b1a46
change stdio channel to SCI5 from SCI0.
...
change ports settings for LED and button.
add PLL setting for 240MHz based on HOCO into HardwareSetup().
2021-06-22 00:20:08 +09:00
fbda7d5837
adding rx65n
2021-06-20 15:04:39 +07:00
7dce27c732
fix build with saml21, update microchip driver submodule
2021-06-19 16:21:14 +07:00
82618d2d5f
fix build with mm32 board
2021-06-18 17:18:11 +07:00
0ae83458d5
dsp updata
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
b8ac5f1287
add mindmotion mm32sdk as submodule
...
remove the local copy of mm32
2021-06-18 12:46:27 +07:00
3ba72b53d8
Add MM32 SDK and USB driver
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
7bed7d70f0
add support SAML21
2021-06-15 00:01:28 -05:00
85fc423569
Rename SAM7X to SAMX7X
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 12:36:59 +02:00
776a770947
dcd: sam7x: rename family dcd to include the whole family
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:09:24 +01:00
28875c431b
bsp: same70_xplained: replace template vars from make
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:02:23 +01:00
71aae2743c
bsp: same70_xplained: fix unused variable warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:01:12 +01:00
fd7b18a4f6
Make examples standalone buildable via CMake
2021-06-10 10:11:20 -05:00
26b9fc38ed
Add MM32 SDK and USB driver ( #869 )
...
* Add MM32 SDK and USB driver
* add mindmotion mm32sdk as submodule
remove the local copy of mm32
* mit license
Signed-off-by: zhangslice <1304224508@qq.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-07 17:32:46 +07:00
de436e1f76
undo search replace error
2021-06-02 11:30:42 -05:00
1fb211f390
minor comment change to force rebuild
2021-06-02 09:52:49 -05:00
bef33d108a
move core definition of source file includes from SDK into family.cmake
...
only build webserver example if lwip submodule initialized
2021-06-02 09:33:23 -05:00
109d02531e
remove TINYUSB_FAMILT_PROJECT_NAME_INCLUDES_BOARD setting
2021-06-01 11:21:19 -05:00
ebf6461c42
damn submodules!
2021-06-01 10:58:44 -05:00
6e29bf6e54
rename family.cmake to family_common.cmake
2021-06-01 09:09:25 -05:00
8782d0b8df
fix rp2040 examples build from local tinyusb tree
2021-06-01 09:04:08 -05:00
f5572e24b2
restore unintentionally modified submodules
2021-05-31 11:49:15 -05:00
90d7483d92
guard stdio_uart_init_full with LIB_PICO_STDUI_UART as the function doesn't exist otherwise
2021-05-31 11:18:26 -05:00
13951b43c2
set PICO_TINYUSB_PATH for when building from within tinyusb without pico-sdk/tinyusb submodule
2021-05-31 10:58:14 -05:00
5d161b79bb
Fix up build_family style builds:
...
- added back pre-existing board directories which now just select PICO_BOARD
- added boards/pico_sdk which just uses the pre-existing PICO_BOARD setting
- fixed rp2040/family.cmake to include the magic string "CFG_TUSB_MCU=OPT_MCU_RP2040" expected by build_family.py
2021-05-31 10:06:12 -05:00
95f2478146
Rework rp2040 examples and CMake build:
...
- Examples should be CMake buildable from their own subdirectory; such a build will error out based on
matching .skip.MCU_xxx or a mismatched .only.MCU_
- It should be possible to build from a higher level and use .skip.MCU_ and .only.MCU_ to filter which
examples get built
- The intention is for the CMakeLists.txts in the examples to be non family specific and without MCU based IFs. I have
started this work, but am not really sure the state of the esp32 stuff; in any case the plan is to have
everything encapsulated in the FAMILY/family.cmake
- pico_examples now just includes examples/device/CMakeLists.txt and examples/host/CMakeLists.txt directly, as they
also build correctly when included from there.
Note that .skip.MCU_ for esp32 in the directories it wasn't previously avaiable has not been added, as the .skip is common to the regular Makefile builds also. It isn't clear whether these examples should build for esp32, but if not .skip should be added.
2021-05-30 20:13:47 -05:00
f9c542aa52
fix dfu example build
2021-05-26 18:16:56 +07:00
689d74a595
fix board test example build with nrf
2021-05-26 16:41:17 +07:00
954056da0c
fix warnings cast function type for nrf, fix pico osal warning
...
add TODO for overflow in tusb_fifo.c
2021-05-25 21:02:40 +07:00
e70fb7fd41
fix mkl25z ci
2021-04-29 00:33:03 +07:00
cf64b2214b
fix build with mkl25z
2021-04-29 00:22:28 +07:00
d70af332c0
fixed build with lpc51
2021-04-28 23:44:04 +07:00
fdda9f75db
add lpc54628 but usb clock;phy doesn't seem to be right
2021-04-28 23:25:07 +07:00
8a9f412788
fix lpc54 button
2021-04-28 22:34:56 +07:00
71a1f57ccd
generalize lpc54 family
2021-04-28 21:34:26 +07:00
9a6552c4b3
fix build with lpc54
2021-04-28 20:02:17 +07:00
fcedb2eecb
fix lpc55 build
2021-04-28 19:53:31 +07:00
810057bdb2
fix build with imxrt
2021-04-28 19:30:23 +07:00
af0db342df
update lpc mcu sdk path
2021-04-28 18:30:19 +07:00
aaa8c9928c
add official nxp mcux-sdk submodule
2021-04-28 18:26:04 +07:00
e115e08728
add nxp_lpcopen as submodule
2021-04-28 18:11:49 +07:00
62c5fa1056
remove submodule hw/mcu/nxp
2021-04-28 18:07:26 +07:00
3da76ae449
making new family lpc54
2021-04-28 16:13:43 +07:00
c1c4b2f6bf
complete lpc15 family
2021-04-28 15:16:36 +07:00
bbc6d4f9e8
create new lpc15 family
2021-04-28 15:10:31 +07:00
6882a7af3b
lpc1549 work well now
2021-04-28 14:53:46 +07:00
b5339caa17
clean up lpc55 boards
2021-04-26 21:40:58 +07:00
f4475ea85b
change lpc55s28 default port to 1
2021-04-26 21:26:13 +07:00
7abafbb1bd
Merge pull request #807 from UweBonnes/lpc55-port1-hs
...
mcu-link: Board support for MCU-LINK with LPC55S69JBD64
2021-04-26 20:28:47 +07:00
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
fd7337fe04
mcu_link: Board support for MCU_LINK with LPC55S69JBD64
2021-04-26 10:26:46 +02:00
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
5c5d4b189f
add lpc55 uart write
2021-04-22 19:24:19 +07:00
a2be6c1472
correct boot stage2 for itsybitsy and qt rp2040
2021-04-19 14:03:29 +07:00
01801c881b
Merge pull request #783 from alisitsyn/esp-based_on_334e95f
...
WIP: Add new Espressif target esp32s3 for tinyUSB
2021-04-19 13:01:50 +07:00
faae19f560
update ci build
2021-04-18 15:44:50 +07:00
0517377dcb
add stm32f072eval to group
2021-04-18 15:44:34 +07:00
4c8750badb
add f070 nucleo to group
2021-04-18 14:26:07 +07:00
a5b406da51
create stm32f0 group
2021-04-18 13:24:34 +07:00
9fceed39fc
When used with FreeRTOS, lower the interrupt priority for OTG_FS_IRQn
2021-04-17 23:43:03 +01:00
38cc459c93
Merge branch 'master' into alisitsyn-esp-based_on_334e95f
2021-04-18 01:30:19 +07:00
70c89da7ba
Change LED_STATE_ON to 0 for f401 and f411 blackpill boards
2021-04-16 15:51:19 +01:00
f5e02e72ed
espressif: group boards using target name as a family
...
`hw\bsp` separate one family folder to esp32s2, esp32s3
add board specific board.cmake file to override board specific options(features)
fix examples and test scripts to use new family approach
2021-04-16 15:41:42 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
62a0d5b42d
Changed LED_PIN to 17, LED_STATE_ON to 0
2021-04-15 16:12:19 +01:00
c8bb0020ea
update rp2040 to use pico-sdk externally
...
also try to update ci
2021-04-11 13:37:07 +07:00
bebc910447
remove pico-sdk as submodule
2021-04-11 13:19:51 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
65a04f02b6
add sltb009a bsp
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-31 23:45:33 +01:00
ff2978d95f
added comments for JLink connection work.
2021-03-31 22:15:03 +09:00
25057022e3
add a submodule of Renesas RX family to `hw/mcu/renesas/rx`
2021-03-31 21:53:15 +09:00
74c8887c8e
removed a submodule for Renesas
2021-03-31 21:50:53 +09:00
5a0c594c71
move rx63n into its own family
2021-03-29 23:54:44 +07:00
30687daf9b
added a submodule dependency
2021-03-28 16:45:53 +09:00
0e0f9a8da3
added a submodule for RX63N
2021-03-28 00:46:08 +09:00
0b76a2da88
added a setting for RX63X
2021-03-28 00:34:29 +09:00
5f4e6dafc5
added short-enums into CFLAGS
2021-03-28 00:10:53 +09:00
4c832a9195
Set newlib as the default library
2021-03-27 22:21:47 +09:00
eab214e07c
added settings for LWIP and FreeRTOS
2021-03-27 19:12:34 +09:00
e48b2c681e
fixed definitions for stack areas
2021-03-27 16:00:56 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
hathach