add stm32f103 mini v2.0 board
This commit is contained in:
hathach
parent
1992f49343
commit
ebfd65a9ca
|
|
@ -307,10 +307,11 @@ ST STM32
|
|||
- `STM32 F070rb Nucleo <https://www.st.com/en/evaluation-tools/nucleo-f070rb.html>`__
|
||||
- `STM32 F072 Evaluation <https://www.st.com/en/evaluation-tools/stm32072b-eval.html>`__
|
||||
- `STM32 F072rb Discovery <https://www.st.com/en/evaluation-tools/32f072bdiscovery.html>`__
|
||||
- STM32 F103c Blue Pill
|
||||
- `STM32 F103c8 Blue Pill <https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill>`__
|
||||
- `STM32 F103rc Mini v2.0 <https://stm32-base.org/boards/STM32F103RCT6-STM32-Mini-V2.0>`__
|
||||
- `STM32 F207zg Nucleo <https://www.st.com/en/evaluation-tools/nucleo-f207zg.html>`__
|
||||
- `STM32 F303vc Discovery <https://www.st.com/en/evaluation-tools/stm32f3discovery.html>`__
|
||||
- STM32 F401cc Black Pill
|
||||
- `STM32 F401cc Black Pill <https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2>`__
|
||||
- `STM32 F407vg Discovery <https://www.st.com/en/evaluation-tools/stm32f4discovery.html>`__
|
||||
- `STM32 F411ce Black Pill <https://www.adafruit.com/product/4877>`__
|
||||
- `STM32 F411ve Discovery <https://www.st.com/en/evaluation-tools/32f411ediscovery.html>`__
|
||||
|
|
|
|||
|
|
@ -0,0 +1,167 @@
|
|||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
** File : STM32F103XB_FLASH.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F103xB Device with
|
||||
** 128KByte FLASH, 20KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20004FFF; /* end of RAM */
|
||||
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 48K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
|
@ -0,0 +1,92 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// LED
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_8
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// Button
|
||||
#define BUTTON_PORT GPIOA
|
||||
#define BUTTON_PIN GPIO_PIN_0
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
// UART
|
||||
//#define UART_DEV USART1
|
||||
//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE
|
||||
//#define UART_GPIO_PORT GPIOA
|
||||
//#define UART_GPIO_AF GPIO_AF1_USART1
|
||||
//#define UART_TX_PIN GPIO_PIN_9
|
||||
//#define UART_RX_PIN GPIO_PIN_10
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// RCC Clock
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void board_stm32f1_clock_init(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef clkinitstruct = {0};
|
||||
RCC_OscInitTypeDef oscinitstruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0};
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
oscinitstruct.HSEState = RCC_HSE_ON;
|
||||
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
|
||||
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
HAL_RCC_OscConfig(&oscinitstruct);
|
||||
|
||||
/* USB clock selection */
|
||||
rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
|
||||
HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2);
|
||||
}
|
||||
|
||||
static inline void board_vbus_sense_init(void)
|
||||
{
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f103rc
|
||||
|
||||
# flash target ROM bootloader
|
||||
flash: flash-jlink
|
||||
|
|
@ -41,7 +41,7 @@ _Min_Stack_Size = 0x400; /* required amount of stack */
|
|||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
}
|
||||
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = $(BOARD_PATH)/STM32F103XB_FLASH.ld
|
||||
LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
|
||||
|
||||
# For flash-jlink target
|
||||
|
|
|
|||
|
|
@ -75,14 +75,14 @@ void board_init(void)
|
|||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Pull = LED_STATE_ON ? GPIO_PULLDOWN : GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
// Button
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue