kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

Move clock enable to BSP.

This commit is contained in:
MasterPhi 2021-07-30 12:03:35 +02:00
parent b6b5a33806
commit 8b5625bf4e
1 changed files with 23 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
hw/bsp/same70_xplained/same70_xplained.c
View File

@ -59,51 +59,41 @@ static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr)
//------------- IMPLEMENTATION -------------//
void board_init(void)
{
init_mcu();
init_mcu();
/* Disable Watchdog */
hri_wdt_set_MR_WDDIS_bit(WDT);
/* Disable Watchdog */
hri_wdt_set_MR_WDDIS_bit(WDT);
// LED
_pmc_enable_periph_clock(ID_PIOC);
gpio_set_pin_level(LED_PIN, false);
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
// LED
_pmc_enable_periph_clock(ID_PIOC);
gpio_set_pin_level(LED_PIN, false);
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
// Button
_pmc_enable_periph_clock(ID_PIOA);
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
// Button
_pmc_enable_periph_clock(ID_PIOA);
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
// Uart via EDBG Com
_pmc_enable_periph_clock(ID_USART1);
gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1);
gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1);
// Uart via EDBG Com
_pmc_enable_periph_clock(ID_USART1);
gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1);
gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1);
usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async());
usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE);
usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM);
// usart_async_register_callback(&EDBG_COM, USART_ASYNC_RXC_CB, rx_cb_EDBG_COM);
usart_async_enable(&edbg_com);
usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async());
usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE);
usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM);
usart_async_enable(&edbg_com);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer (samd SystemCoreClock may not correct)
SysTick_Config(CONF_CPU_FREQUENCY / 1000);
#endif
#if 0
// USB Pin, Clock init
// Enable USB clock
_pmc_enable_periph_clock(ID_USBHS);
/* Clear SYSIO 10 & 11 for USB DM & DP */
hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11);
// Enable clock
_pmc_enable_periph_clock(ID_UDP);
/* USB Device mode & Transceiver active */
hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE);
#endif
}
//--------------------------------------------------------------------+