kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

change output filename to BOARD-Directory

This commit is contained in:
hathach 2021-01-26 12:46:24 +07:00
parent 0e585570a3
commit 4a0f5cbd63
57 changed files with 96 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
examples/device/audio_test/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
# use BOARD-Directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/board_test/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/cdc_dual_ports/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/cdc_msc/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

14
examples/device/cdc_msc_freertos/CMakeLists.txt
View File

@ -1,18 +1,18 @@
cmake_minimum_required(VERSION 3.5)
# use directory name for project id
# use BOARD-Directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")
get_filename_component(TOP "${TOP}" REALPATH)
# Check for -DFAMILY=
if(NOT DEFINED FAMILY)
if(FAMILY STREQUAL "esp32s2")
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
project(${PROJECT})
else()
message(FATAL_ERROR "Invalid FAMILY specified")
endif()
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
project(${PROJECT})
project(cdc_msc_freertos)

1
examples/device/dfu_rt/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/dynamic_configuration/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/hid_composite/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

14
examples/device/hid_composite_freertos/CMakeLists.txt
View File

@ -1,18 +1,18 @@
cmake_minimum_required(VERSION 3.5)
# use directory name for project id
# use BOARD-Directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")
get_filename_component(TOP "${TOP}" REALPATH)
# Check for -DFAMILY=
if(NOT DEFINED FAMILY)
if(FAMILY STREQUAL "esp32s2")
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
project(${PROJECT})
else()
message(FATAL_ERROR "Invalid FAMILY specified")
endif()
include(${TOP}/hw/bsp/${FAMILY}/family.cmake)
project(${PROJECT})
project(hid_composite_freertos)

1
examples/device/hid_generic_inout/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/hid_multiple_interface/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/midi_test/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/msc_dual_lun/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/net_lwip_webserver/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/uac2_headset/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/usbtmc/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/device/webusb_serial/CMakeLists.txt
View File

@ -1,5 +1,6 @@
# use directory name for project id
get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME)
set(PROJECT ${BOARD}-${PROJECT})
# TOP is absolute path to root directory of TinyUSB git repo
set(TOP "../../..")

1
examples/make.mk
View File

@ -4,6 +4,7 @@
# Build directory
BUILD = _build/$(BOARD)
PROJECT = $(BOARD)-$(notdir $(CURDIR))
# Handy check parameter function
check_defined = \

23
examples/rules.mk
View File

@ -43,6 +43,9 @@ all:
clean:
$(RM) -rf $(BUILD)
#copy-artifact:
# @$(CP)
else
# GNU Make build system
@ -100,9 +103,9 @@ endif
# Set all as default goal
.DEFAULT_GOAL := all
all: $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/$(BOARD)-firmware.hex size
all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size
uf2: $(BUILD)/$(BOARD)-firmware.uf2
uf2: $(BUILD)/$(PROJECT).uf2
OBJ_DIRS = $(sort $(dir $(OBJ)))
$(OBJ): | $(OBJ_DIRS)
@ -113,20 +116,20 @@ else
@$(MKDIR) -p $@
endif
$(BUILD)/$(BOARD)-firmware.elf: $(OBJ)
$(BUILD)/$(PROJECT).elf: $(OBJ)
@echo LINK $@
@$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
$(BUILD)/$(BOARD)-firmware.bin: $(BUILD)/$(BOARD)-firmware.elf
$(BUILD)/$(PROJECT).bin: $(BUILD)/$(PROJECT).elf
@echo CREATE $@
@$(OBJCOPY) -O binary $^ $@
$(BUILD)/$(BOARD)-firmware.hex: $(BUILD)/$(BOARD)-firmware.elf
$(BUILD)/$(PROJECT).hex: $(BUILD)/$(PROJECT).elf
@echo CREATE $@
@$(OBJCOPY) -O ihex $^ $@
UF2_FAMILY ?= 0x00
$(BUILD)/$(BOARD)-firmware.uf2: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex
@echo CREATE $@
$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY) -c -o $@ $^
@ -150,7 +153,7 @@ $(BUILD)/obj/%.o: %.S
@echo AS $(notdir $@)
@$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $<
size: $(BUILD)/$(BOARD)-firmware.elf
size: $(BUILD)/$(PROJECT).elf
-@echo ''
@$(SIZE) $<
-@echo ''
@ -178,7 +181,7 @@ endif
JLINK_IF ?= swd
# Flash using jlink
flash-jlink: $(BUILD)/$(BOARD)-firmware.hex
flash-jlink: $(BUILD)/$(PROJECT).hex
@echo halt > $(BUILD)/$(BOARD).jlink
@echo r > $(BUILD)/$(BOARD).jlink
@echo loadfile $^ >> $(BUILD)/$(BOARD).jlink
@ -188,11 +191,11 @@ flash-jlink: $(BUILD)/$(BOARD)-firmware.hex
$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
# flash STM32 MCU using stlink with STM32 Cube Programmer CLI
flash-stlink: $(BUILD)/$(BOARD)-firmware.elf
flash-stlink: $(BUILD)/$(PROJECT).elf
STM32_Programmer_CLI --connect port=swd --write $< --go
# flash with pyocd
flash-pyocd: $(BUILD)/$(BOARD)-firmware.hex
flash-pyocd: $(BUILD)/$(PROJECT).hex
pyocd flash -t $(PYOCD_TARGET) $<
pyocd reset -t $(PYOCD_TARGET)

4
hw/bsp/da14695_dk_usb/board.mk
View File

@ -42,10 +42,10 @@ JLINK_DEVICE = DA14695
# flash using jlink but with some twists
flash: flash-dialog
flash-dialog: $(BUILD)/$(BOARD)-firmware.bin
flash-dialog: $(BUILD)/$(PROJECT).bin
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
mkimage da1469x $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/version.h $^.img
mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img
cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
cat $^.img >> $(BUILD)/$(BOARD)-image.bin
@echo r > $(BUILD)/$(BOARD).jlink

4
hw/bsp/da1469x_dk_pro/board.mk
View File

@ -42,10 +42,10 @@ JLINK_DEVICE = DA14699
# flash using jlink but with some twists
flash: flash-dialog
flash-dialog: $(BUILD)/$(BOARD)-firmware.bin
flash-dialog: $(BUILD)/$(PROJECT).bin
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
mkimage da1469x $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/version.h $^.img
mkimage da1469x $(BUILD)/$(PROJECT).bin $(BUILD)/version.h $^.img
cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
cat $^.img >> $(BUILD)/$(BOARD)-image.bin
@echo r > $(BUILD)/$(BOARD).jlink

2
hw/bsp/double_m33_express/board.mk
View File

@ -51,5 +51,5 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
JLINK_DEVICE = LPC55S69
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC55S69 $<

4
hw/bsp/fomu/board.mk
View File

@ -27,9 +27,9 @@ CHIP_FAMILY = eptri
FREERTOS_PORT = RISC-V
# flash using dfu-util
$(BUILD)/$(BOARD)-firmware.dfu: $(BUILD)/$(BOARD)-firmware.bin
$(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin
@echo "Create $@"
python $(TOP)/hw/bsp/$(BOARD)/dfu.py -b $^ -D 0x1209:0x5bf0 $@
flash: $(BUILD)/$(BOARD)-firmware.dfu
flash: $(BUILD)/$(PROJECT).dfu
dfu-util -D $^

2
hw/bsp/imxrt/boards/teensy_40/board.mk
View File

@ -6,5 +6,5 @@ JLINK_DEVICE = MIMXRT1062xxx6A
# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
# Make sure it is in your PATH
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
teensy_loader_cli --mcu=imxrt1062 -v -w $<

2
hw/bsp/lpcxpresso11u37/board.mk
View File

@ -42,5 +42,5 @@ FREERTOS_PORT = ARM_CM0
JLINK_DEVICE = LPC11U37/401
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t lpc11u37 $<

2
hw/bsp/lpcxpresso11u68/board.mk
View File

@ -39,5 +39,5 @@ FREERTOS_PORT = ARM_CM0
JLINK_DEVICE = LPC11U68
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t lpc11u68 $<

2
hw/bsp/lpcxpresso51u68/board.mk
View File

@ -43,5 +43,5 @@ FREERTOS_PORT = ARM_CM0
JLINK_DEVICE = LPC51U68
# flash using pyocd (51u68 is not supported yet)
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC51U68 $<

2
hw/bsp/lpcxpresso54114/board.mk
View File

@ -45,5 +45,5 @@ FREERTOS_PORT = ARM_CM4F
JLINK_DEVICE = LPC54114J256_M4
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC54114 $<

2
hw/bsp/lpcxpresso55s69/board.mk
View File

@ -45,5 +45,5 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
JLINK_DEVICE = LPC55S69
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC55S69 $<

2
hw/bsp/mbed1768/board.mk
View File

@ -41,6 +41,6 @@ FREERTOS_PORT = ARM_CM3
JLINK_DEVICE = LPC1768
# flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t lpc1768 $<

4
hw/bsp/msp_exp430f5529lp/board.mk
View File

@ -28,9 +28,9 @@ endif
# flash target using TI MSP430-Flasher
# http://www.ti.com/tool/MSP430-FLASHER
# Please add its installation dir to PATH
flash: $(BUILD)/$(BOARD)-firmware.hex
flash: $(BUILD)/$(PROJECT).hex
MSP430Flasher -w $< -z [VCC]
# flash target using mspdebug.
flash-mspdebug: $(BUILD)/$(BOARD)-firmware.elf
flash-mspdebug: $(BUILD)/$(PROJECT).elf
$(MSPDEBUG) tilib "prog $<" --allow-fw-update

4
hw/bsp/nrf/boards/adafruit_clue/board.mk
View File

@ -1,10 +1,10 @@
MCU_VARIANT = nrf52840
CFLAGS += -DNRF52840_XXAA
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
# flash using adafruit-nrfutil dfu
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

2
hw/bsp/nrf/boards/arduino_nano33_ble/board.mk
View File

@ -8,6 +8,6 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld
# Add it to your PATH or change BOSSAC variable to match your installation
BOSSAC = bossac
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
$(BOSSAC) --port=$(SERIAL) -U -i -e -w $^ -R

4
hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk
View File

@ -1,10 +1,10 @@
MCU_VARIANT = nrf52840
CFLAGS += -DNRF52840_XXAA
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
# flash using adafruit-nrfutil dfu
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

4
hw/bsp/nrf/boards/feather_nrf52840_express/board.mk
View File

@ -1,10 +1,10 @@
MCU_VARIANT = nrf52840
CFLAGS += -DNRF52840_XXAA
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
# flash using adafruit-nrfutil dfu
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

4
hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk
View File

@ -1,10 +1,10 @@
MCU_VARIANT = nrf52840
CFLAGS += -DNRF52840_XXAA
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
# flash using adafruit-nrfutil dfu
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

4
hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk
View File

@ -1,10 +1,10 @@
MCU_VARIANT = nrf52840
CFLAGS += -DNRF52840_XXAA
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
# flash using adafruit-nrfutil dfu
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200

4
hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk
View File

@ -7,9 +7,9 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld
# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash
NRFUTIL = nrfutil
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
$(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
$(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200

4
hw/bsp/nrf/boards/pca10059/board.mk
View File

@ -7,9 +7,9 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld
# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash
NRFUTIL = nrfutil
$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex
$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
$(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@
flash: $(BUILD)/$(BOARD)-firmware.zip
flash: $(BUILD)/$(PROJECT).zip
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
$(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200

2
hw/bsp/nutiny_nuc121s/board.mk
View File

@ -52,5 +52,5 @@ JLINK_DEVICE = NUC121SC2AE
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"

2
hw/bsp/nutiny_nuc125s/board.mk
View File

@ -36,5 +36,5 @@ JLINK_DEVICE = NUC125SC2AE
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"

2
hw/bsp/nutiny_nuc126v/board.mk
View File

@ -56,5 +56,5 @@ JLINK_DEVICE = NUC126VG4AE
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"

2
hw/bsp/nutiny_sdk_nuc120/board.mk
View File

@ -52,5 +52,5 @@ JLINK_DEVICE = NUC120LE3
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit"

2
hw/bsp/nutiny_sdk_nuc505/board.mk
View File

@ -57,5 +57,5 @@ JLINK_DEVICE = NUC505YO13Y
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
openocd -f interface/nulink.cfg -f target/numicroM4.cfg -c "program $< reset exit"

2
hw/bsp/samd11_xplained/board.mk
View File

@ -42,5 +42,5 @@ FREERTOS_PORT = ARM_CM0
JLINK_DEVICE = ATSAMD11D14
# flash using edbg
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
edbg -b -t samd11 -e -pv -f $<

2
hw/bsp/samd21/boards/luna/board.mk
View File

@ -6,6 +6,6 @@ LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld
JLINK_DEVICE = ATSAMD21G18
# flash using dfu-util
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $<

2
hw/bsp/samd21/family.mk
View File

@ -41,6 +41,6 @@ FREERTOS_PORT = ARM_CM0
# Add it to your PATH or change BOSSAC variable to match your installation
BOSSAC = bossac
flash-bossac: $(BUILD)/$(BOARD)-firmware.bin
flash-bossac: $(BUILD)/$(PROJECT).bin
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R

2
hw/bsp/samd51/family.mk
View File

@ -44,6 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# Add it to your PATH or change BOSSAC variable to match your installation
BOSSAC = bossac
flash-bossac: $(BUILD)/$(BOARD)-firmware.bin
flash-bossac: $(BUILD)/$(PROJECT).bin
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R

2
hw/bsp/same70_xplained/board.mk
View File

@ -54,5 +54,5 @@ JLINK_DEVICE = SAME70Q21B
# flash using edbg from https://github.com/ataradov/edbg
# Note: SAME70's GPNVM1 must be set to 1 to boot from flash with
# edbg -t same70 -F w0,1,1
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
edbg --verbose -t same70 -pv -f $<

2
hw/bsp/samg55xplained/board.mk
View File

@ -49,5 +49,5 @@ FREERTOS_PORT = ARM_CM4F
JLINK_DEVICE = ATSAMG55J19
# flash using edbg from https://github.com/ataradov/edbg
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
edbg --verbose -t samg55 -pv -f $<

8
hw/bsp/spresense/board.mk
View File

@ -61,13 +61,13 @@ LDFLAGS += \
VENDOR = sony
CHIP_FAMILY = cxd56
$(MKSPK): $(BUILD)/$(BOARD)-firmware.elf
$(MKSPK): $(BUILD)/$(PROJECT).elf
$(MAKE) -C $(TOP)/hw/mcu/sony/cxd56/mkspk
$(BUILD)/$(BOARD)-firmware.spk: $(MKSPK)
$(BUILD)/$(PROJECT).spk: $(MKSPK)
@echo CREATE $@
@$(MKSPK) -c 2 $(BUILD)/$(BOARD)-firmware.elf nuttx $@
@$(MKSPK) -c 2 $(BUILD)/$(PROJECT).elf nuttx $@
# flash
flash: $(BUILD)/$(BOARD)-firmware.spk
flash: $(BUILD)/$(PROJECT).spk
@$(TOP)/hw/mcu/sony/cxd56/tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $<

2
hw/bsp/stm32f103bluepill/board.mk
View File

@ -46,5 +46,5 @@ FREERTOS_PORT = ARM_CM3
JLINK_DEVICE = stm32f103c8
# flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
dfu-util -R -a 0 --dfuse-address 0x08000000 -D $<

2
hw/bsp/stm32f4/boards/feather_stm32f405/board.mk
View File

@ -8,5 +8,5 @@ SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
JLINK_DEVICE = stm32f405rg
# flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
dfu-util -R -a 0 --dfuse-address 0x08000000 -D $<

2
hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk
View File

@ -8,5 +8,5 @@ SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f401xc.s
JLINK_DEVICE = stm32f401cc
# flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
dfu-util -R -a 0 --dfuse-address 0x08000000 -D $<

2
hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
View File

@ -8,5 +8,5 @@ SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
JLINK_DEVICE = stm32f411ce
# flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin
flash: $(BUILD)/$(PROJECT).bin
dfu-util -R -a 0 --dfuse-address 0x08000000 -D $<

2
hw/bsp/stm32l0538disco/board.mk
View File

@ -50,5 +50,5 @@ JLINK_DEVICE = STM32L053R8
STM32Prog = STM32_Programmer_CLI
# flash target using on-board stlink
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
$(STM32Prog) --connect port=swd --write $< --go

2
hw/bsp/stm32l476disco/board.mk
View File

@ -53,5 +53,5 @@ JLINK_DEVICE = stm32l476vg
STM32Prog = STM32_Programmer_CLI
# flash target using on-board stlink
flash: $(BUILD)/$(BOARD)-firmware.elf
flash: $(BUILD)/$(PROJECT).elf
$(STM32Prog) --connect port=swd --write $< --go