hathach
cec747776d
rename dcd_init_handler to dcd_irq_handler to consistent with other ports
2020-04-10 14:47:02 +07:00
hathach
d122d7de88
remove commented code
2020-04-10 14:45:55 +07:00
hathach
a40d1e800d
try to fix racing condition with setup
2020-04-10 14:04:18 +07:00
Nathan Conrad
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
hathach
d6578823bb
rename static function for dcd_cxd56 to prevent conflict
2020-04-09 12:00:45 +07:00
hathach
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
Ha Thach
defea45d44
Merge branch 'master' into refactor-irqhandler
2020-04-09 11:22:20 +07:00
hathach
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
hathach
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
hathach
880595433c
use macro for easy enable/disable SOF
2020-04-08 15:41:16 +07:00
hathach
7b7a78ab2e
disable SOF interrupt since it is not used for now
2020-04-08 15:33:07 +07:00
Peter Lawrence
ccb65fcf6a
nuvoton: add dcd_disconnect() dcd_connect()
2020-04-07 10:51:55 -05:00
hathach
06e87b47a2
revert name to dcd_init_handler()
...
since the function signature is different
2020-04-06 21:28:02 +07:00
hathach
22a9b05834
rename dcd_int_handler to dcd_irq_handler for consistency with other port
2020-04-06 19:49:25 +07:00
hathach
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
hathach
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
hathach
050de0ec33
fix issue and typo with In token when Fifo empty
...
fix transmit packet endpoint's fifo
2020-04-06 16:32:55 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
hathach
1e7c3cf95e
update dcd esp32s2 fifo allocation to match current dcd synopsys
2020-04-03 17:09:38 +07:00
hathach
a3e50242b9
add dcd_esp32s2
...
skip esp32s2_saola for make build since idf use cmake
2020-04-01 17:07:28 +07:00
Ha Thach
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
Ha Thach
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
William D. Jones
6b5157fd28
dcd_msp430x5xx: Add dummy dcd_edpt0_status_complete handler. Add
...
comment which describes why it might be needed.
2020-03-24 00:03:12 -04:00
Nathan Conrad
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
hathach
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
hathach
a93548cfe9
update comment per review
2020-03-17 23:39:53 +07:00
hathach
a39d170672
follow up to pr #301
...
rename OPT_MCU_NUC505_USB_DMA to simply USE_DMA
2020-03-17 10:40:45 +07:00
Peter Lawrence
df05440d92
NUC505 : added comment on DMA choice
2020-03-16 13:20:17 -05:00
Peter Lawrence
fb56c02a6f
NUC505 : fix operation with net_lwip_webserver
2020-03-15 17:44:09 -05:00
hathach
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
hathach
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
hathach
c8247f0907
fix zlp for nrf52840
2020-03-08 14:20:28 +07:00
Ha Thach
5f5ee465a6
Merge pull request #291 from hathach/port-samg55
...
Port samg55
2020-03-07 16:38:59 +07:00
Peter Lawrence
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
hathach
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
hathach
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
hathach
087e3c7f56
Merge branch 'master' into port-samg55
2020-02-07 16:50:07 +07:00
hathach
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
Peter Lawrence
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
hathach
e2f60a5134
rt10xx: correct max endpoint count is 8
2020-01-17 17:09:23 +07:00
hathach
04d8671641
clean up, disable SOF for dcd trans since we don't use it for now
2020-01-17 12:59:00 +07:00
hathach
3208fe00b6
clean up
2020-01-17 12:06:59 +07:00
Ha Thach
1f95f439e1
Merge pull request #274 from tannewt/dcache
...
Clean and invalidate the DCache when we have one.
2020-01-17 09:47:38 +07:00
Scott Shawcroft
cd6454a330
Add if guards for dcache flushes.
2020-01-16 17:17:49 -08:00
Scott Shawcroft
ae68668df9
flush and invalidate the dcache
2020-01-15 21:59:15 -08:00
Ha Thach
12b191510a
Merge branch 'master' into nucbusreset
2020-01-16 11:22:33 +07:00
Ha Thach
537ceb0f65
Merge branch 'master' into line_endings
2020-01-16 10:55:14 +07:00
Peter Lawrence
2ed395bde3
nuc121: survive USB bus reset
2020-01-15 21:40:24 -06:00
Peter Lawrence
c04bc07c29
nuc121: enhanced driver and hopefully added readability
2020-01-15 20:09:50 -06:00
Nathan Conrad
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
Peter Lawrence
7f2db321bf
nuc121: better fix for handling large OUT transfers
2020-01-15 10:23:23 -06:00
Peter Lawrence
f2a5335417
nuc121: fix handling of OUT transfers larger than max packet size
2020-01-14 22:07:38 -06:00
Sean Cross
a6b916ba85
Merge pull request #269 from antmicro/volatile_buffers_fix
...
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
2020-01-15 07:02:11 +10:00
Mateusz Holenko
c1781e5e7c
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
...
This makes `rx_buffer` and `tx_buffer` *pointers*
volatile in order to avoid caching them in a register.
The original notation meant "a pointer to a volatile value"
(equivalent of `volatile uint8_t *`). This resulted in
`while(rx_buffer[ep_num] != NULL) ;` loop to get stuck
forever, even though the IRQ handler set the `rx_buffer[ep_num] = NULL`.
2020-01-14 13:57:17 +01:00
Ha Thach
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
Peter Lawrence
5c5f876461
dcd_nuc121: allow user ZLP transfers to get a callback
2020-01-04 13:36:26 -06:00
Peter Lawrence
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
hathach
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
hathach
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
hathach
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
hathach
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
hathach
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
hathach
421221baa5
making more progress, but failed with WRITE10
...
incorrect queue 448 bytes instead of 512
2019-12-21 23:51:57 +07:00
hathach
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
Ha Thach
7a05b177a4
Merge pull request #236 from jeremyherbert/master
...
Update dcd_stm32_fsdev.c with note about F042Fx remapping
2019-12-12 10:17:40 +07:00
Jeremy Herbert
9d96b6d66e
Update dcd_stm32_fsdev.c
...
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
hathach
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
hathach
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
hathach
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
hathach
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
hathach
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
hathach
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
hathach
988edce745
fix build
2019-12-09 18:49:38 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
Sean Cross
26dcc19b18
valentyusb: eptri: don't double-advance read buffer
...
Due to an error, we were double-advancing the FIFO buffer. The end
result was that the second half of most reads were getting ignored.
This wasn't found during earlier testing because only 64-byte buffers
were tested.
This corrects this error by avoiding double-advancing the buffer.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-29 18:14:23 +08:00
hathach
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
hathach
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
hathach
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
hathach
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
hathach
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
hathach
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
hathach
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
hathach
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
Ha Thach
ca741dfc2a
Merge pull request #220 from hathach/develop
...
Port NXP iMX RT10XX
2019-11-22 15:16:41 +07:00
hathach
6123b600fc
rename dcd_lpc18_43 to dcd_transdimension
2019-11-22 14:47:07 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
fca4653b95
able to compile dcd 18/43 with rt1064
2019-11-22 12:34:41 +07:00
hathach
2ead26a12d
more clean up
2019-11-22 12:26:40 +07:00
hathach
ccb09db3b7
more clean up
2019-11-22 12:16:47 +07:00
hathach
7e16a9a1db
more constant rename clean up
2019-11-22 12:14:55 +07:00
hathach
8aacd1eacd
refactor dcd_lpc18_43, making it capatible with rt10xx
2019-11-22 12:11:13 +07:00
hathach
623b16af2e
clean up dcd lpc18_43
...
drop supporting both device mode on both ports.
2019-11-22 00:58:18 +07:00
hathach
1f52273d99
move dcd_lpc18_43.h into .c file
2019-11-22 00:38:22 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
Sean Cross
a9282eab51
eptri: clear proper endpoint when opening IN port
...
When opening a USB port, we ensure the buffer is NULL and has
a length of 0.
Due to a mistake in specifying the endpoint type, we never actually
cleared the value when opening an IN endpoint. This patch fixes
the comparison when opening an IN endpoint.
This fixes issue #218 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-20 17:45:21 +08:00
Sean Cross
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
e05e9801e4
fomu: gate debug/logging features
...
This gates the majority of the debug and logging features behind
testable macros.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
3292920933
fomu: first stable working commit
...
This appears to be stable, and works well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
1882a87212
fomu: remove reference to SETUP_CTRL.ACK
...
THis bit isn't used anymore, so remove it.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
729c8d073c
fomu: dcd_fomu: add next_ev support
...
Now that we have the `USB_NEXT_EV` register, take advantage of
it to work around issue #207 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:09:38 -08:00
Sean Cross
913032ae1d
dcd_fomu: nearly there
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
835a72c595
fomu: semi-working dcd file
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
843136d0e4
fomu: commit latest version
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
22fd7bf85e
fomu: first fully-working release
...
This is able to transfer lots of data back and forth across MSC.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
0559fd13fb
fomu: fix some issues with dcd_fomu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
32bb68409e
portable: fomu: get msc to enumerate
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
Sean Cross
36ede44885
fomu: wip support
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
hathach
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
William D. Jones
5d585c03bd
dcd_msp430x5xx: Improve comments regarding SETUP packet handling.
2019-10-29 14:08:39 -04:00
William D. Jones
3f0f7cfd07
dcd_msp430x5xx: Clarify hardware STALL behavior and current vs ideal
...
behavior of driver in comments.
2019-10-29 12:52:56 -04:00
hathach
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
William D. Jones
d0146be00b
dcd_msp430x5xx: Fix typo in copy-paste in transmit_packet.
2019-10-10 04:19:48 -04:00
William D. Jones
c8e899fef0
dcd_msp430x5xx: Improve SETUP packet and EP0 NAK interactions, per
...
42.3.1.3 in Reference Manual; fix is incomplete but works.
2019-10-10 04:02:35 -04:00
hathach
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
Kamil Tomaszewski
0cea82568c
Disable/enable only USB interrupt
2019-10-08 09:58:56 +02:00
Kamil Tomaszewski
9923604221
Send SUSPEND and RESUME signals
2019-10-07 14:04:48 +02:00
Kamil Tomaszewski
b3872febe2
Disable/enable interrupt
2019-10-07 14:03:02 +02:00
Kamil Tomaszewski
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
hathach
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
William D. Jones
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
William D. Jones
05914de109
dcd_msp430x5xx: Fix typos in dcd_edpt_clear_stall.
2019-10-02 22:36:45 -04:00
William D. Jones
3edb5548e9
dcd_msp430x5xx: Ensure DBUF bit is cleared on endpoint open, as it
...
could get spuriously set in debugging sessions. cdc_msc functional.
2019-10-02 01:19:12 -04:00
hathach
820a3705f5
Merge branch 'master' into develop
2019-10-02 12:13:47 +07:00
hathach
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
Nathan Conrad
1e193212d7
Add testcase for EP0 stall recovery to USBTMC test script.
2019-10-02 00:31:47 -04:00
Nathan Conrad
e5f38e3e86
Remove references to EP kind.
2019-10-02 00:11:16 -04:00
Nathan Conrad
838cfe02c1
Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0
2019-10-02 00:09:07 -04:00
William D. Jones
19ee519926
dcd_msp430x5xx: Correct byte count masks in transmit/receive routines.
2019-10-02 00:01:58 -04:00
William D. Jones
54478aaa2a
dcd_msp430x5xx: Add STALL support for nonzero endpoints.
2019-10-01 23:28:41 -04:00
William D. Jones
fad44c03c8
dcd_msp430x5xx: Fix TOGGLE bit behavior, clear stall when endpoint
...
opened due to reset potentially not resetting everything.
2019-10-01 23:03:39 -04:00
hathach
d27291f288
Merge branch 'master' into develop
2019-09-30 14:45:34 +07:00
William D. Jones
b623e3023e
dcd_msp430x5xx: Implement receive_packet for all endpoints, correct
...
some mistakes in transmit_packet.
2019-09-29 03:58:30 -04:00
William D. Jones
549ad1d9b6
dcd_msp430x5xx: Fix missing mask when posting IN xfer events.
2019-09-29 03:02:59 -04:00
William D. Jones
838b431fac
dcd_msp430x5xx: Implement transmit_packet for nonzero endpoints. Untested.
2019-09-29 02:43:05 -04:00
William D. Jones
2247f132ca
Implement dcd_edpt_xfer for nonzero endpoints.
2019-09-29 02:22:09 -04:00
William D. Jones
ea0e799df6
dcd_msp430x5xx: Fix clear stall logic.
2019-09-29 02:17:59 -04:00
William D. Jones
529efcc0d2
dcd_msp430x5xx: Implement dcd_edpt_open.
2019-09-29 00:21:40 -04:00
William D. Jones
5d9f833915
dcd_msp430x5xx: Implement STALL logic for EP 0.
2019-09-28 02:09:03 -04:00
William D. Jones
63c94ff684
dcd_msp430x5xx: Improve EP0 IN handling (reuse short_packet field).
2019-09-28 01:51:05 -04:00
William D. Jones
030560792d
dcd_msp430x5xx: Implement dcd_set_address.
2019-09-27 21:59:45 -04:00
William D. Jones
3ac43076da
dcd_msp430x5xx: Implement EP0 IN xfers, clean up.
2019-09-27 21:22:19 -04:00
Nathan Conrad
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
Nathan Conrad
4ccdc5522d
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 12:41:46 -04:00
hathach
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
Nathan Conrad
f19082f02d
Reset TX and RX endpoints to NAK when receiving setup packet.
2019-09-25 20:55:15 -04:00
Nathan Conrad
048e0448c0
ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar.
2019-09-25 20:54:59 -04:00
William D. Jones
01b4115b0b
dcd_msp430x5xx: Fix Setup packet delay by actually enabling
...
corresponding interrupt.
2019-09-24 04:06:34 -04:00
William D. Jones
550e8215f3
dcd_msp430x5xx: Setup packets are now received successfully (with delay).
2019-09-24 03:43:51 -04:00
William D. Jones
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
William D. Jones
950614a841
msp430f5529: Implement dcd_int_enable/disable.
2019-09-23 22:58:49 -04:00
William D. Jones
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
William D. Jones
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
hathach
7ba8e81852
Merge pull request #177 from cr1901/fifo-fix
...
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-22 11:38:54 +07:00
William D. Jones
108f756e22
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-21 23:01:06 -04:00
Nathan Conrad
ce9f133d25
FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos.
2019-09-21 12:00:04 -04:00
hathach
94c9cf0eff
doc update
2019-09-20 16:14:35 +07:00
hathach
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
Nathan Conrad
525b4cdb72
Use ESOF for wakeup timing.
2019-09-19 09:51:40 -04:00
Nathan Conrad
642afeea8b
s/static const/define/
2019-09-19 09:30:16 -04:00
Nathan Conrad
85623584f9
Remove debug assertions.
2019-09-19 09:24:52 -04:00
Nathan Conrad
5fcc1468eb
Merge branch 'master' into fsdev_smallPacket
2019-09-19 09:16:48 -04:00
Nathan Conrad
89ffe78f84
ST FSDEV: No need to always reset the interrupt priority, also add some synchronization primitives after disabling interrupts.
2019-09-16 22:56:17 -04:00
Nathan Conrad
a33a854793
Include board header file... :X
2019-09-16 20:56:57 -04:00
Nathan Conrad
d341337c6a
Implement remote wakeup + perhaps better sleep?
2019-09-16 20:25:50 -04:00
Nathan Conrad
6b9783cead
s/unsigned int/uint32_t/
2019-09-16 09:20:15 -04:00
hathach
0c70948d0d
Merge pull request #163 from hathach/develop
...
fix #143
2019-09-16 16:37:27 +07:00
hathach
a37d2d64be
fix #143
2019-09-16 13:32:47 +07:00
Nathan Conrad
05c13342a3
Implement EP with size <64.
2019-09-15 23:51:42 -04:00
Nathan Conrad
18303e742e
Covert macros to inline functions.
2019-09-15 23:46:03 -04:00
Nathan Conrad
ae873a709e
Wrote TX instead of RX.
2019-09-15 23:33:36 -04:00
William D. Jones
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
Nathan Conrad
4ea212a432
This demonstrates that I don't pre-build things before committing them... oops.
2019-09-13 23:52:43 -04:00
Nathan Conrad
c831311a12
Off-by-one error in Synopsys assertions. (and move some braces to their own lines.
2019-09-13 23:38:58 -04:00
hathach
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
hathach
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
Nathan Conrad
d3507b0787
Merge remote-tracking branch 'origin/master' into stfsdev_cleanups
2019-09-11 20:36:48 -04:00
Nathan Conrad
3326b9d008
Use types with explicit bit widths.
2019-09-11 20:33:47 -04:00
hathach
7f166d860d
stm32f7 work with dcd synopsis
...
close #124
2019-09-11 22:48:07 +07:00
Nathan Conrad
7b93177890
Use TU_VERIFY_STATIC, use more uint instead of uint8_t/uint16_t. Create reg16_clear_bits function to reduce typec conversion warnings.
2019-09-11 09:45:48 -04:00
Nathan Conrad
784dc52b62
Update header comments.
2019-09-11 09:44:25 -04:00
Nathan Conrad
4cf2b30759
Fix bug where the EPREGs were not being initialized as expected.
2019-09-11 09:43:57 -04:00
hathach
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
Nathan Conrad
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
Nathan Conrad
23d39f2b15
Remove OPT_MCU_STM for L and G series.
2019-09-10 12:13:36 -04:00
Nathan Conrad
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
Nathan Conrad
49c58be4ce
Fix silly typo in the F3xx support.
2019-09-10 01:31:14 -04:00
Nathan Conrad
bc2a65b20b
A few bug fixes, remove the unstested device notices, note supported boards in READMEs, and implement PMA
...
access stride (used on MCU's with 512 byte USB buffers).
2019-09-10 01:03:24 -04:00
Nathan Conrad
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
Nathan Conrad
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
Nathan Conrad
5ec59c2a30
Add STM32 FSDEV driver.
2019-09-09 14:55:39 -04:00
Nathan Conrad
b4c8a09f20
Remove STM32 F3 port.
2019-09-09 13:29:26 -04:00
William D. Jones
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
William D. Jones
82cd4b5350
dcd_stm32f4: Merge relevant changes from dcd_stm32h7.
2019-09-09 10:27:46 -04:00
William D. Jones
3efc81b285
dcd_stm32h7: Merge relevant changes from dcd_stm32f4. USB2 -> USB works as alias.
2019-09-09 10:14:20 -04:00
hathach
e123cad7bb
enhance dcd stm32f4 to support max 4 or 6 endpoints on 407 or 412
2019-09-08 23:10:51 +07:00
hathach
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
hathach
56f1ccd68a
fix #97
2019-09-05 21:59:19 +07:00
hathach
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
hathach
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
hathach
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
William D. Jones
8f8ca77a91
stm32h7: Mark USB FIFOs as volatile, otherwise optimizations will remove
...
reads/writes to the FIFOs.
2019-09-04 01:06:07 -04:00
William D. Jones
910fd867c7
stm32h7: Fix indentation error where OUT XFER interrupt wasn't handled
...
in the correct scope.
2019-09-03 01:37:44 -04:00
William D. Jones
1a3dc9cba1
stm32h7: USB_OTG_FS -> USB2_OTG_FS.
2019-09-03 01:28:41 -04:00
William D. Jones
f703a74daa
stm32h7: Implement STALL logic for endpoints.
2019-09-03 01:28:41 -04:00
William D. Jones
28b131ea94
stm32h7: Implement dcd_edpt_open. cdc_msc_hid demo functional.
2019-09-03 00:37:50 -04:00
William D. Jones
d4302dacc5
stm32h7: Fix accidental overwrite of STUPCNT field in DOEPTSIZ register.
2019-09-03 00:25:21 -04:00
William D. Jones
9210167603
stm32h7: Implement dcd_set_address.
2019-09-02 21:00:30 -04:00
William D. Jones
0d0b802ee0
stm32h7: Implement IN and OUT receive for EP0; device descriptor returned.
2019-09-02 19:32:11 -04:00
William D. Jones
f602534536
stm32h7: Implement setup packet events.
2019-09-02 13:34:33 -04:00
hathach
074681da8b
dma of lpc54114 can also execute up to 64 bytes each transfer
...
There is still issue with cdc_msc_hid example
2019-09-01 17:05:34 +07:00
hathach
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
hathach
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
hathach
957201fc58
fix undef __ARM_ARCH_6M__
2019-09-01 11:59:50 +07:00
hathach
2d041aaa1d
clean up
2019-09-01 08:11:22 +07:00
hathach
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
hathach
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
William D. Jones
8b165e1024
stm32h7: Ensure FS (and the only) PHY is selected for OTG_HS2.
2019-08-30 22:07:35 -04:00
William D. Jones
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
William D. Jones
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
hathach
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
hathach
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
hathach
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
hathach
ed6fa460e9
stm32 minor change
2019-07-19 10:59:35 +07:00
hathach
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
hathach
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
hathach
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
hathach
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
hathach
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
hathach
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
hathach
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
hathach
2050778763
clean up
2019-05-01 20:41:26 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
hathach
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
hathach
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
hathach
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
hathach
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
hathach
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
hathach
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
hathach
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
hathach
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
hathach
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
hathach
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
hathach
da55610f43
clean up
2019-03-20 20:19:21 +07:00
hathach
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
hathach
f932cf3854
stm32 update fifo in comment
2019-03-17 15:16:52 +07:00
hathach
5e92d67015
stm32 update TX Fifo for edpt IN, both CDC + MSC work great
...
- call dcd_event_xfer_complete() when enough bytes received
- add dcd_get_frame_number()
2019-03-15 18:43:09 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
hathach
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
William D. Jones
c95ad426c6
stm32f4: Refactor IN and OUT endpoint interrupt handling into their own functions.
2019-02-27 11:01:08 -05:00
William D. Jones
f43161353c
stm32f4: Refactor RX FIFO read into its own function; remove RXFLVL
...
resetting (read only) and masking (no nested ints).
2019-02-27 10:39:37 -05:00
William D. Jones
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
William D. Jones
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
William D. Jones
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
William D. Jones
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b
) cleanups.
2019-02-08 12:05:44 -05:00
William D. Jones
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
William D. Jones
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
William D. Jones
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
William D. Jones
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
William D. Jones
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
William D. Jones
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
William D. Jones
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
William D. Jones
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
William D. Jones
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
William D. Jones
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
William D. Jones
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
William D. Jones
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
William D. Jones
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
777f41a066
clean up
2019-01-29 18:47:29 +07:00
William D. Jones
9e76635465
stm32f4: Clarify required FIFO sizes and observed behavior.
2019-01-24 04:18:53 -05:00
William D. Jones
fe7f304ad4
stm32f4: Start adding OUT interrupt handling, fix buffer sizes; RXFIFO
...
too low for some reason, TXFIFO EP0 used wrong bitmask.
2019-01-24 03:06:57 -05:00
hathach
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
William D. Jones
01117fb965
stm32f4: Finish dcd_edpt_xfer implementation (OUT xfers not functional yet).
2019-01-23 03:31:44 -05:00
William D. Jones
b41f610514
stm32f4: Remember to turn off TXFE when IN xfer is done; it not
...
automatically cleared like EPENA.
2019-01-23 02:24:29 -05:00
William D. Jones
836d13fc4b
stm32f4: Fix FIFO write logic (requires 32 bit writes).
2019-01-23 02:06:07 -05:00
William D. Jones
aa9a7e882c
stm32f4: Properly set control endpoint max packet size.
2019-01-23 00:55:45 -05:00
William D. Jones
17e418bce4
stm32f4: Fix incorrect xfer length for short packet IN xfers.
2019-01-23 00:44:55 -05:00
William D. Jones
d1150432fe
stm32f4: Remove assumption that EP 0 is only control endpoint.
2019-01-23 00:12:33 -05:00
William D. Jones
51c0ce3f6b
stm32f4: Implement interrupt handling for IN packets (first signs of life).
2019-01-22 23:51:58 -05:00
William D. Jones
43c890615a
stm32f4: Start implementing dcd_edpt_xfer.
2019-01-22 00:42:43 -05:00
William D. Jones
69f5f18fd6
stm32f4: Remove some template commented code.
2019-01-21 23:45:40 -05:00
William D. Jones
71e1b9d045
stm32f4: Setup packet events in tinyusb now functional.
2019-01-19 21:12:20 -05:00
William D. Jones
5720aef7bb
stm32f4: Implement setup packing receive, fix typo in FIFO receive size.
2019-01-19 20:03:18 -05:00
William D. Jones
06c15bf913
stm32f4: Complete initialization for EP0 (packet handling not implemented).
2019-01-19 17:56:53 -05:00
William D. Jones
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
William D. Jones
03cbd406cb
dcd_stm32f4: Add USB init skeleton based on manual (does not enumerate).
2019-01-11 19:53:24 -05:00
William D. Jones
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
William D. Jones
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
William D. Jones
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
hathach
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
hathach
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
hathach
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
hathach
e3514b8054
rename hcd_device_remove to hcd_device_close
2018-12-12 11:34:09 +07:00
hathach
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
hathach
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
hathach
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
hathach
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
hathach
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
hathach
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
hathach
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
hathach
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
hathach
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
hathach
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
hathach
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
hathach
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
hathach
658c2ff570
rename
2018-11-30 12:56:09 +07:00
hathach
723e02780d
clean up
2018-11-30 12:51:54 +07:00
hathach
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00