kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stm32f4: Setup packet events in tinyusb now functional.

This commit is contained in:
William D. Jones 2019-01-19 21:12:10 -05:00
parent 5720aef7bb
commit 71e1b9d045
1 changed files with 26 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
src/portable/stm/stm32f4/dcd_stm32f4.c
View File

@ -53,7 +53,7 @@
static ATTR_ALIGNED(4) uint32_t _setup_packet[6];
static uint8_t _setup_cnt; // We store up to 3 setup packets.
static uint8_t _setup_offs; // We store up to 3 setup packets.
// Setup the control endpoint 0.
static void bus_reset(void) {
@ -80,6 +80,8 @@ static void bus_reset(void) {
USB_OTG_FS->DIEPTXF0_HNPTXFSIZ = 16; // 16 32-bit words = 64 bytes
out_ep[0].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos);
USB_OTG_FS->GINTMSK |= USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IEPINT;
}
static void end_of_reset(void) {
@ -335,6 +337,7 @@ USB_TRFAIL1_PERR_0, USB_TRFAIL1_PERR_1, USB_TRFAIL1_PERR_2,
USB_TRFAIL1_PERR_3, USB_TRFAIL1_PERR_4, USB_TRFAIL1_PERR_5,
USB_TRFAIL1_PERR_6, USB_TRFAIL1_PERR_7, USB_UPRSM, USB_WAKEUP */
void OTG_FS_IRQHandler(void) {
USB_OTG_DeviceTypeDef * dev = DEVICE_BASE;
USB_OTG_OUTEndpointTypeDef * out_ep = OUT_EP_BASE;
uint32_t * rx_fifo = FIFO_BASE(0);
@ -355,7 +358,7 @@ void OTG_FS_IRQHandler(void) {
dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
}
// Read a packet here; the FIFO must be cleared in order for the core
// Read a packet here; the RX FIFO must be cleared in order for the core
// to continue processing. So read into an intermediate buffer.
if(int_status & USB_OTG_GINTSTS_RXFLVL) {
USB_OTG_FS->GINTSTS = USB_OTG_GINTSTS_RXFLVL;
@ -376,7 +379,7 @@ void OTG_FS_IRQHandler(void) {
case 0x03: // Out packet done (Interrupt)
break;
case 0x04: // Setup packet done (Interrupt)
_setup_cnt = 3 - ((out_ep[0].DOEPTSIZ & USB_OTG_DOEPTSIZ_STUPCNT_Msk) >> USB_OTG_DOEPTSIZ_STUPCNT_Pos);
_setup_offs = 2 - ((out_ep[0].DOEPTSIZ & USB_OTG_DOEPTSIZ_STUPCNT_Msk) >> USB_OTG_DOEPTSIZ_STUPCNT_Pos);
out_ep[0].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos);
break;
case 0x06: // Setup packet recvd
@ -396,7 +399,26 @@ void OTG_FS_IRQHandler(void) {
}
// OUT endpoint interrupt handling.
// if(int_status & )
if(int_status & USB_OTG_GINTSTS_OEPINT) {
// DAINT for a given EP clears when DOEPINTx is cleared.
// OEPINT will be cleared when DAINT's out bits are cleared.
for(int n = 0; n < 4; n++) {
if(dev->DAINT & (1 << (USB_OTG_DAINT_OEPINT_Pos + n))) {
// SETUP packet Setup Phase done.
if(out_ep[n].DOEPINT & USB_OTG_DOEPINT_STUP) {
out_ep[n].DOEPINT = USB_OTG_DOEPINT_STUP;
dcd_event_setup_received(0, (uint8_t*) &_setup_packet[2*_setup_offs], true);
_setup_offs = 0;
// TODO: Endpoint zero can't be disabled, but apparently the
// ENdpoint ENAble bit being cleared still applies. Check whether
// EPENA clear actually disables EP0.
// out_ep[n].DOEPCTL |= USB_OTG_DOEPCTL_EPENA;
}
}
}
}
// uint32_t int_status = USB->DEVICE.INTFLAG.reg;