kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

move nvic prio in hal/dcd to bsp for portability

This commit is contained in:
hathach 2018-11-29 22:59:00 +07:00
parent 57b85262b2
commit 522b0c11ef
6 changed files with 13 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
hw/bsp/board.h
View File

@ -52,20 +52,6 @@
#include "ansi_escape.h"
//--------------------------------------------------------------------+
// PRINTF TARGET DEFINE
//--------------------------------------------------------------------+
/** \defgroup group_printf Printf Retarget
* \brief Retarget the standard stdio printf/getchar to other IOs
* @{ */
#define PRINTF_TARGET_SEMIHOST 1 ///< Using the semihost support from toolchain, requires no hardware but is the slowest
#define PRINTF_TARGET_UART 2 ///< Using UART as stdio, this is the default for most of the board
#define PRINTF_TARGET_SWO 3 ///< Using non-instructive serial wire output (SWO), is the best option since it does not slow down MCU but requires supported from debugger and IDE
#define PRINTF_TARGET_NONE 4 ///< Using none at all.
/** @} */
#define PRINTF(...) printf(__VA_ARGS__)
#if defined BOARD_LPCXPRESSO11U14
#include "lpcxpresso11u14/board_lpcxpresso11u14.h"
#elif defined BOARD_LPCXPRESSO11U68

3
hw/bsp/lpcxpresso/board_lpcxpresso11u14.h
View File

@ -47,9 +47,6 @@
#include "lpc11uxx_gpio.h"
#include "lpc11uxx_uart.h"
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif

3
hw/bsp/lpcxpresso11u68/board_lpcxpresso11u68.h
View File

@ -47,9 +47,6 @@
#include "lpc11uxx_gpio.h"
#include "lpc11uxx_uart.h"
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif

18
hw/bsp/lpcxpresso1769/board_lpcxpresso1769.c
View File

@ -37,15 +37,18 @@
/**************************************************************************/
#include "bsp/board.h"
#include "tusb.h"
#ifdef BOARD_LPCXPRESSO1769
#include "LPC17xx.h"
#include "lpc17xx_clkpwr.h"
#include "lpc17xx_gpio.h"
#include "lpc17xx_uart.h"
#include "lpc17xx_pinsel.h"
#define BOARD_LED_PORT (0)
#define BOARD_LED_PIN (22)
#include "tusb.h"
#define BOARD_LED0_PORT (0)
static const struct {
uint8_t port;
@ -73,10 +76,13 @@ void board_init(void)
#if CFG_TUSB_OS == OPT_OS_NONE // TODO may move to main.c
SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
//------------- LED -------------//
GPIO_SetDir(BOARD_LED_PORT, BIT_(BOARD_LED_PIN), 1);
GPIO_SetDir(BOARD_LED0_PORT, BIT_(BOARD_LED0), 1);
//------------- BUTTON -------------//
for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIO_SetDir(buttons[i].port, BIT_(buttons[i].pin), 0);
@ -146,10 +152,10 @@ void board_led_control(uint32_t id, bool state)
if (state)
{
GPIO_SetValue(BOARD_LED_PORT, BIT_(BOARD_LED_PIN));
GPIO_SetValue(BOARD_LED0_PORT, BIT_(BOARD_LED0));
}else
{
GPIO_ClearValue(BOARD_LED_PORT, BIT_(BOARD_LED_PIN));
GPIO_ClearValue(BOARD_LED0_PORT, BIT_(BOARD_LED0));
}
}

6
hw/bsp/lpcxpresso1769/board_lpcxpresso1769.h
View File

@ -49,12 +49,8 @@
extern "C" {
#endif
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
#define BOARD_LED_NUM 1
#define BOARD_LED0 0
#define BOARD_LED0 22
#ifdef __cplusplus
}

10
src/portable/nxp/lpc17xx/dcd_lpc175x_6x.c
View File

@ -44,8 +44,6 @@
#include "dcd_lpc175x_6x.h"
#include "LPC17xx.h"
#include "osal/osal.h"
//--------------------------------------------------------------------+
// MACRO CONSTANT TYPEDEF
//--------------------------------------------------------------------+
@ -199,14 +197,6 @@ bool dcd_init(uint8_t rhport)
sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1); // connect
// USB IRQ priority should be set by application previously
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
#if CFG_TUSB_OS == OPT_OS_FREERTOS
if ( NVIC_GetPriority(USB_IRQn) < configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY )
{
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
}
#endif
NVIC_ClearPendingIRQ(USB_IRQn);
NVIC_EnableIRQ(USB_IRQn);