c691dc4cb2
update
2019-11-25 10:42:32 +07:00
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
64b05a1d5f
Merge pull request #225 from xobs/fomu-offset-fix
...
bsp: fomu: fix rom address for example programs
2019-11-24 11:18:53 +07:00
a106c5114b
bsp: fomu: fix rom address for example programs
...
During development, the ROM address was at offset 0x2001a000
(due to the fact that the test program was located immediately
following the bitstream).
In normal Fomus, the ROM address is at offset 0x20040000, in order
to take into account additional bitstreams and bootloaders.
Correct the address to the offset in order to get examples working
with existing Fomus.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 01:15:31 +00:00
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
d1d8ded43b
added iMX RT1060 EVK board support
...
board_text, cdc_msc, hid_composite all work
2019-11-22 17:36:04 +07:00
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
636c1475ba
clean up
2019-11-22 12:38:24 +07:00
627d9a2b33
adding irq to rt1064evk
2019-11-22 00:34:31 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
54d597b723
rt1064evk led, button, uart all work
2019-11-20 17:10:30 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
679821e917
fomu: bsp: don't call usb isr when usb is disabled
...
When compiled without usb support, we don't want to call the USB ISR.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:10:37 -08:00
67267a9399
fomu: bsp: remove unused messible functions
...
These functions are unused in the current implementation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:08:56 -08:00
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
25d5628063
fomu: csr: sync csr
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
f087cb1580
fomu: crt0: minor text refactor
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
77cf0b5bfd
fomu: csr: add version with next_ev register
...
The Fomu bitstream now includes a `USB_NEXT_EV` register to
indicate which is the next logical event to process. Add this
register to the CSR definition.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
83bca4a74f
fomu: semi-working commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
ef07427e06
bsp: fomu: update
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:13 -08:00
ba889eeb9e
bsp: fomu: fix linker script overlap
...
The end of the data section was overlapping the start of the bss.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
f152bed4b4
fomu: initial commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
23df777b30
update nxp_driver submodule for imx rt families
2019-11-11 12:14:54 +07:00
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
eca14a5ab3
re-add submodule nxp_driver
2019-11-11 11:38:30 +07:00
50cfc556d2
remove submodule lpc_driver
2019-11-11 11:33:50 +07:00
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
d65bc34bfe
added and tested nRF52833DK (pca10100)
2019-11-11 00:11:49 +07:00
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
2f19b9c100
update submodule nrfx to 2.0.0 for nrf52833 support
2019-11-10 21:04:55 +07:00
a19db3bdd2
added board nrf52840 mdk dongle
2019-11-10 20:07:43 +07:00
943b7467d8
correct LED, button and uart for feather_stm32f405
2019-11-09 00:08:32 +07:00
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
8cd19f88b9
clean up
2019-11-04 22:03:31 +07:00
42b55f6621
clean up
2019-11-04 15:00:44 +07:00
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
68a53e05fc
Merge pull request #2 from hathach/pigrew-ZLP_Request2
...
zlp request2. PR for PR (has issues with STM32F0 FSDEV)
2019-11-03 17:50:41 -05:00
cebc066813
Add UART HAL source file to stm32f070 makefile.
2019-11-03 15:25:55 -05:00
5839159742
Enable UART debugging on F070.
2019-11-03 09:54:02 -05:00
585aebeb12
add uart support for stm32f072disco
2019-11-03 12:54:05 +07:00
ffeb61a710
msp_exp430f5529lp: Use ti submodule for includes and linker files.
2019-10-29 11:43:26 -04:00
6e204ca567
add --allow-fw-update for convenience
2019-10-29 17:36:53 +07:00
71a4076e73
correct read()/write() retarget for msp430, fix msp430 button state
2019-10-29 16:24:09 +07:00
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
78bf82291e
add uart support for stm32f4nucleo board (via stlink cdc)
2019-10-19 18:19:59 +07:00
2f3f23fd94
change to use nrfx uarte
2019-10-18 18:30:09 +07:00
558b4dbde3
change DEBUG optimization option from O0 to Og
...
add uart write to board test example
2019-10-18 17:50:29 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
d9ef34276b
update doc
2019-10-11 11:26:19 +07:00
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
f86f0e54a9
added ti_driver submodule
2019-10-07 15:06:36 +07:00
ada73a57c6
add ti_driver as submodule
2019-10-07 14:27:02 +07:00
97af9e3332
msp_exp430f5529lp: Make board_millis atomic.
2019-10-06 20:44:06 -04:00
16ff152129
msp_exp430f5529lp: Set up UART functionality.
2019-10-05 09:37:48 -04:00
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
13d37e4a36
lpcxpresso1549 board test running
2019-10-03 15:23:01 +07:00
7fd68efe7b
couldn't get 32L4 running with crystal less mode
2019-10-03 13:37:10 +07:00
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
0a20e91cc9
move linker file to blue pill bsp
2019-10-02 14:23:23 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
6479ee53d5
-Wno-error=cast-function-type is only available for gcc 8+, change travis dist to bionic
2019-10-01 15:43:28 +07:00
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
80b430fcfc
added stm32L0538 discovery board, board test exmaple works
2019-09-20 13:02:17 +07:00
49f2507b38
msp_exp430f5529lp: Implement enough functionality for board_test.
2019-09-19 01:21:29 -04:00
3440083bfd
added board feather stm32f045
2019-09-18 14:38:56 +07:00
772b0c17bf
rules.mk: Create an LDINC variable for linker script search path.
2019-09-14 21:16:10 -04:00
d464c26ab2
msp430f5529: Remove -nostdlib and -nostartfiles, as the compiler
...
provides them.
2019-09-14 21:06:57 -04:00
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
98a68d600c
Merge pull request #131 from cr1901/pyboard
...
Add PyBoard BSP
2019-09-14 16:31:43 +07:00
d7137e36ca
pyboardv11: Fix typo in HSE_VALUE define so that SysTick runs at correct
...
frequency.
2019-09-14 04:32:10 -04:00
9e96c10014
Merge pull request #151 from hathach/develop
...
fix #139 , correct usbd request intepreting, Non-STD request to Interf… … …ace must be forward to class driver
2019-09-13 13:14:18 +07:00
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
f830f6956e
Correct port assigned on the STM32F070 BSP
2019-09-12 14:53:53 -04:00
72046d957c
fix #145
2019-09-12 10:43:16 +07:00
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
6b79f399a1
Merge branch 'master' of https://github.com/hathach/tinyusb into pyboard
2019-09-11 14:14:02 -04:00
a3f1c269e9
added stm32f767nucleo board, board_test works
2019-09-11 18:02:27 +07:00
de659be83e
tested all the stm32f4 board, work great
2019-09-11 17:37:23 +07:00
8a2b228c3f
ported stm32f3, close #67
2019-09-11 16:56:26 +07:00
ec50b274fc
added stm32f072disco board
...
close #104
2019-09-11 12:05:55 +07:00
3f02c35983
fix #130
2019-09-11 11:55:16 +07:00
34b76898da
adding stm32f072disco board, board_test example running
2019-09-11 11:41:47 +07:00
bf76a1e49e
Merge pull request #136 from hathach/develop
...
fix #132
2019-09-11 11:16:47 +07:00
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
fc10ff2f05
Add pyboard (v1.1) BSP. cdc_msc_hid example tested.
2019-09-10 14:10:33 -04:00
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
b6a5cf83c4
update st_driver
2019-09-10 23:55:45 +07:00
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
2cf2f35fa3
Correct JLINK_DEVICE and FREERTOS_PORT in F070RB make file. FreeRTOS and j-link are untested.
2019-09-10 08:28:56 -04:00
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
b9b9f67698
ngx4330 usb0 work well
2019-09-09 17:30:43 +07:00
3497dd0264
adding ngx4330
2019-09-09 16:47:57 +07:00
218aaf94de
more clean up
2019-09-09 13:19:00 +07:00
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
8ac115a33e
clean up
2019-09-09 12:25:39 +07:00
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
642ff56b32
ported pca10059
2019-09-08 21:55:03 +07:00
8fd7836ff6
added board stm32f412 discovery, board_test exmaple run
2019-09-06 17:31:37 +07:00
b1296139d0
board test run with lpcxpresso 11u37
2019-09-06 15:49:42 +07:00
4ef3946a25
adding lpcxpresso11u37 board
2019-09-06 15:06:04 +07:00
192a95a96e
moving lpc11u6x
2019-09-06 12:07:48 +07:00
5fc6819ddb
update submodule st_driver with all stm32 families
2019-09-06 10:47:30 +07:00
aa50ba54ef
remove submodule stm32lib
2019-09-05 23:45:53 +07:00
fae8a944f0
swith stm32h7 to use st_driver
2019-09-05 23:39:09 +07:00
1d2223a116
switch stm32f3 to use st_driver
2019-09-05 22:41:58 +07:00
c4b384d22f
switch stm32f4 to use st_driver submodule
2019-09-05 22:12:43 +07:00
50b0826d4f
adding st_driver as submodule
2019-09-05 21:34:49 +07:00
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
dd07e743d8
added mbed lpc1768 board
2019-09-05 14:29:17 +07:00
2e00019aae
board_test work with lpcxpresso55s69
2019-09-03 13:25:36 +07:00
4ce8796b2a
board_stm32h743nucleo: Implement user button for mouse/keyboard demo.
2019-09-03 01:28:41 -04:00
ee57113981
trying to add LPC55xx support
2019-09-02 15:53:12 +07:00
85fae75fba
clean up
2019-09-02 15:34:47 +07:00
6268f395eb
add button for stm32f407 and stm32f411 board
2019-09-02 14:58:46 +07:00
f2bbb75695
clean up
2019-09-01 22:44:56 +07:00
67d2cf39d5
clean up
2019-09-01 21:04:43 +07:00
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
403662a1d6
board_test run with lpc54114
2019-09-01 15:58:42 +07:00
fb1ca24b02
adding lpc54114 port
2019-09-01 15:30:25 +07:00
96f0f8d2d7
update lpc_driver
2019-09-01 15:13:56 +07:00
e99ff703dc
more lpc51u68 driver clean up
2019-09-01 15:11:09 +07:00
a5a768e5f7
update lpc51u68 linker
2019-09-01 14:58:36 +07:00
803d06d685
clean up
2019-09-01 14:51:40 +07:00
c18a7fd9ad
Port new board circuitplayground_bluefruit, close #109
2019-09-01 11:51:12 +07:00
7010ea79c4
added new board circuit playground express, close #110
2019-09-01 11:44:55 +07:00
c6f356b4f4
change feather/metro m4_express button to D5
2019-09-01 11:20:22 +07:00
f02a24a10f
change metro_m0_express button to D5
2019-09-01 11:11:26 +07:00
bb21568875
ported feather m0 express close #108
2019-09-01 11:10:28 +07:00
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
c782cc5429
add lpc_driver submobule
2019-08-31 23:20:18 +07:00
237c7018d9
remove submodule lpcopen
2019-08-31 23:19:35 +07:00
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
c70c61ce26
add button read to board_test example
2019-08-31 17:52:24 +07:00
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
0afbf1a9bb
board_stm32h743nucleo: Route USB clock and pins.
2019-08-26 16:48:24 -04:00
1ef98e503a
board_stm32h743nucleo: Route major clocks and LED pins.
2019-08-26 14:20:13 -04:00
fa796de6cd
board_test example run with lpcxpresso51u68
2019-08-26 12:24:46 +07:00
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
d4895c4af6
add board_test example for testing new board
2019-08-24 23:30:35 +07:00
b3acce17cc
adding lpc51u68 support
2019-08-24 00:52:46 +07:00
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
ba056de982
clean up
2019-08-05 22:12:20 +07:00
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
2b43bba453
add missing conf file
2019-07-22 18:54:13 +07:00
1594a9de71
stm32f411 usb work with example
2019-07-22 18:53:52 +07:00
be4eeeb943
refactor stm32f407 to use st hal api
2019-07-22 18:45:12 +07:00
cb8a33ca87
able to blink LED with stm32f411
2019-07-20 22:59:24 +07:00
ed698069d3
clean up
2019-07-20 22:41:45 +07:00
6ec87071ed
able to flash and turn on LED
2019-07-20 22:38:46 +07:00
fa12a0e786
adding stm32f411 disco
...
compile ok
2019-07-19 21:19:06 +07:00
e909270843
rename bsp of stm32 board
2019-07-19 20:37:38 +07:00
d2f53c552a
added adafruit feather m4 express board
2019-07-01 22:57:23 +07:00
90fea785c6
use adafruit-nrfutil dfu as default flash target for feather nrf52840
2019-05-29 16:56:26 +07:00
a619511631
run tud_task() in board_delay()
2019-05-29 16:55:54 +07:00
ce6976f400
better fix for #72 millis overthrow
2019-05-21 13:31:02 +07:00
73c7db38f7
fix #72 address overflow with board_delay
2019-05-21 11:38:46 +07:00
6861b670fc
add uf2 target for uf2 bootloader board: metro m0/m4 feather nrf52840
2019-05-20 12:35:33 +07:00
6e9324e29c
clean up
2019-05-15 18:16:48 +07:00
3278a9765b
ea4357 build with makefile, add to travis
2019-05-15 18:01:58 +07:00
7bd16aaf9b
add button for ea4357
2019-05-15 17:52:29 +07:00
15076006ca
ea4088 quickstart build with makefile
2019-05-15 17:24:21 +07:00
6e6f470b58
board clean up, add button for ea4088
2019-05-15 17:15:02 +07:00
b73047e350
change stm32lib submodule to our folk for now for flexibility
2019-05-15 16:58:08 +07:00
9863230a8d
update button for mcb1800
2019-05-15 16:17:46 +07:00
2d58f3118e
mcb1800 build and blinky with makefile
2019-05-15 16:09:44 +07:00
8ccecde18e
lpc1769 work with makefile
2019-05-15 12:57:31 +07:00
2582dfb3af
lpcxpresso 1769 build with makefile but not blinky yet
2019-05-15 11:34:40 +07:00
2e07a09b0d
add makefile support for lpcxpresso1347
2019-05-14 18:34:57 +07:00
3e1897b943
makefile work with lpc11u68
2019-05-14 17:51:05 +07:00
b1f8aa175e
add linker and startup for lpcxpresso11u68 board
...
able to build and blink LED
2019-05-14 17:37:11 +07:00
851cf5426a
more makefile clean up
2019-05-14 14:07:06 +07:00
8094bdce23
makefile clean up
2019-05-14 13:59:45 +07:00
62f0eb16d6
clean up
2019-05-14 13:31:12 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
6446b02ae7
add hid_test.py for testing #58
...
add feather nrf52840 express to supported board
2019-05-02 18:10:06 +07:00
8a5bd30fa6
freertos cdc_msc_hid makefile compile
2019-05-01 16:01:44 +07:00
0f3da42db8
add make.mk and rules.mk to help new makefile example
2019-05-01 14:27:17 +07:00
4d29decafc
upgrade nrfx to 1.7
2019-05-01 13:52:21 +07:00
307ba23046
wrap up hid device refactor
2019-04-18 22:31:35 +07:00
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
5f3ab2afe1
rename board_led_control to board_led_write
2019-04-02 18:16:04 +07:00
2c1072c0ab
fix build error with stm32
2019-04-02 02:16:54 +07:00
e9851f5042
clean up
2019-04-02 01:20:51 +07:00
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
38f7d281d4
more board clean up
2019-03-27 21:06:44 +07:00
3dfb251c1e
clean up
2019-03-27 16:32:07 +07:00
315076375f
fix timer prio for freertos to blink led
2019-03-25 00:40:51 +07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
29e075b8b9
clean up bsp, adde board_millis()
2019-03-23 22:31:07 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
2533f4004e
adding stm32f3 support
2019-03-22 15:27:03 +07:00
8b7c4ade71
clean up
2019-03-22 14:55:00 +07:00
20fb416783
clean board uart read & write
2019-03-20 20:58:27 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
6787fbeff0
move lpcopen to its own repo (submodule)
2019-03-20 12:37:25 +07:00
f2f3f5a772
fix pca10056 build error due to nrfx undef usage
2019-03-20 01:35:52 +07:00
e6612ab82c
move -nostdlib (-nostartfiles) into board.mk
...
since nrf5x require the use of std startup. Add verbose mode to makefile
2019-03-20 01:23:49 +07:00
d22dea4976
update nrfx to 1.6.2
2019-03-19 19:09:08 +07:00
1062910348
readme clean up
2019-03-19 16:51:41 +07:00
0fcd263df3
stm32f place startup*.o first in linking order due to gcc flto bug
...
ref: https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966
2019-03-19 16:41:00 +07:00
11eed2f026
update flash-jlink target for m0 and m4 board
2019-03-17 15:42:57 +07:00
d56e7fd913
adding flash (jlink)
2019-03-16 01:34:26 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
ddfc32f5ec
adding segger project for stm32f4
2019-03-10 01:24:13 +07:00
0ff7d609f0
add flash target for stm32 board using stm32cubeprogammger cli
2019-03-09 01:04:26 +07:00
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
49aa6ec251
st: Use submodules for system files when possible, use more up to date
...
files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect
changes.
2019-03-04 10:41:05 -05:00
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
6752a71264
usb work when sd is init first
2019-01-29 18:02:25 +07:00
c81b56eb45
nrf5x usb init before sd works
2019-01-29 17:05:53 +07:00
d8b361fdaa
add S140 v6 build config for nrf5x
2019-01-29 14:15:13 +07:00
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
e73e016a8c
bsp.stm32f407g_disc1: Initialize USB clock and pins.
2019-01-11 10:20:14 -05:00
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
e6224bccf9
adding makefile support for nrf5x
...
got undefined reference to `_start'
2019-01-02 22:35:42 +07:00
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
b562fa741b
Update readme.md
2018-12-12 23:08:08 +07:00
hathach