Nathan Conrad
5bd9d14fc1
stm32fsdev: set dcd_connect API definitions to strong, Modify documentation.
2020-04-10 10:26:41 -04:00
hathach
8953bc9255
added comment note for beta chip walkaround
2020-04-10 20:25:53 +07:00
hathach
c545cfc0bc
Correct dedicated FIFO SRAM size to 1024
...
add note for up to 5 active IN endpoints (including EP0 IN)
2020-04-10 15:42:50 +07:00
hathach
978eec73b3
remove 100us delay at the end of dcd_init()
2020-04-10 15:39:59 +07:00
hathach
30945ab9f3
revert name to dcd_int_handler due to function prototype warning
2020-04-10 15:27:23 +07:00
hathach
c0695b4b55
clear USB_RXFLVI_M before read_rx_fifo()
...
more format clean up
2020-04-10 15:13:12 +07:00
hathach
933e3cdfc7
change indent from 4 -> 2 spaces
2020-04-10 15:01:12 +07:00
hathach
cec747776d
rename dcd_init_handler to dcd_irq_handler to consistent with other ports
2020-04-10 14:47:02 +07:00
hathach
d122d7de88
remove commented code
2020-04-10 14:45:55 +07:00
hathach
a40d1e800d
try to fix racing condition with setup
2020-04-10 14:04:18 +07:00
hathach
1b3d1b52c9
fix uint32_t format with log
2020-04-10 13:54:50 +07:00
Nathan Conrad
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
hathach
d6578823bb
rename static function for dcd_cxd56 to prevent conflict
2020-04-09 12:00:45 +07:00
hathach
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
hathach
11201f1a06
adding dcd_connect/disconnect
2020-04-09 11:42:42 +07:00
Ha Thach
defea45d44
Merge branch 'master' into refactor-irqhandler
2020-04-09 11:22:20 +07:00
hathach
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
hathach
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
hathach
880595433c
use macro for easy enable/disable SOF
2020-04-08 15:41:16 +07:00
hathach
7b7a78ab2e
disable SOF interrupt since it is not used for now
2020-04-08 15:33:07 +07:00
Peter Lawrence
ccb65fcf6a
nuvoton: add dcd_disconnect() dcd_connect()
2020-04-07 10:51:55 -05:00
Ha Thach
bfc43bad81
Merge pull request #321 from pigrew/tweak20200331
...
Misc. tweaks, and fix for USBTMC descriptors without an INT EP
2020-04-07 12:12:44 +07:00
Nathan Conrad
06d7fdc228
Use #define for OSAL_TIMEOUT_WAIT_FOREVER.
2020-04-06 12:40:58 -04:00
hathach
06e87b47a2
revert name to dcd_init_handler()
...
since the function signature is different
2020-04-06 21:28:02 +07:00
hathach
22a9b05834
rename dcd_int_handler to dcd_irq_handler for consistency with other port
2020-04-06 19:49:25 +07:00
hathach
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
hathach
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
hathach
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
hathach
c026236824
house keeping
2020-04-06 16:33:04 +07:00
hathach
050de0ec33
fix issue and typo with In token when Fifo empty
...
fix transmit packet endpoint's fifo
2020-04-06 16:32:55 +07:00
hathach
5a00c6ca96
Merge branch 'master' into add-esp32s2
2020-04-06 14:43:49 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
hathach
c2606c0213
allow application to implement its own os
2020-04-05 18:22:16 +07:00
hathach
1e7c3cf95e
update dcd esp32s2 fifo allocation to match current dcd synopsys
2020-04-03 17:09:38 +07:00
Nathan Conrad
84a9715958
tu_verify: Change some define functions use do-while statement.
2020-04-02 23:22:48 -04:00
Nathan Conrad
55fd9fe392
Typo of usbtmc.
2020-04-02 23:16:28 -04:00
Nathan Conrad
0d5f3c7f04
Set OSAL_TIMEOUT_WAIT_FOREVER to be a const, to avoid a pedantic gcc warning about signedness.
2020-04-02 23:07:31 -04:00
hathach
a3e50242b9
add dcd_esp32s2
...
skip esp32s2_saola for make build since idf use cmake
2020-04-01 17:07:28 +07:00
Peter Lawrence
794212d44e
revise argument order for TUD_CONFIG_DESCRIPTOR macro
2020-03-31 10:53:47 -05:00
Peter Lawrence
87f313da48
add provision for multiple configurations
2020-03-30 13:47:17 -05:00
Ha Thach
dc6f90eaf7
Merge pull request #311 from majbthrd/usbnet_ecm_macos
...
usbnet: tweak CDC-ECM after MacOS testing
2020-03-28 14:33:17 +07:00
Peter Lawrence
622a6c77a1
usbnet: tweak CDC-ECM after MacOS testing
2020-03-27 20:30:57 -05:00
Nathan Conrad
6606cf2896
USBD: Use tud_control_xfer only for data
2020-03-27 15:54:37 -04:00
Ha Thach
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
Ha Thach
9a48e98fad
Merge branch 'master' into develop
2020-03-24 12:16:15 +07:00
Ha Thach
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
William D. Jones
6b5157fd28
dcd_msp430x5xx: Add dummy dcd_edpt0_status_complete handler. Add
...
comment which describes why it might be needed.
2020-03-24 00:03:12 -04:00
hathach
8a22eba7b4
add TODO note to remove tud_network_mac_address
2020-03-23 15:24:30 +07:00
Nathan Conrad
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
hathach
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
hathach
a93548cfe9
update comment per review
2020-03-17 23:39:53 +07:00
hathach
a39d170672
follow up to pr #301
...
rename OPT_MCU_NUC505_USB_DMA to simply USE_DMA
2020-03-17 10:40:45 +07:00
Ha Thach
e47f992157
Merge pull request #301 from majbthrd/nuc505tweak
...
NUC505 : fix operation with net_lwip_webserver
2020-03-17 10:24:09 +07:00
Peter Lawrence
df05440d92
NUC505 : added comment on DMA choice
2020-03-16 13:20:17 -05:00
Ha Thach
14ab9bf2fe
Merge pull request #298 from pigrew/UART_CRLF
...
Use CRLF on UART log messages?
2020-03-16 11:23:07 +07:00
Ha Thach
f13835a2fb
Merge pull request #290 from majbthrd/usbnet-stm32rndis
...
usbnet RNDIS correction (STM32 RNDIS now valid)
2020-03-16 11:16:57 +07:00
Peter Lawrence
aafddfe637
following suggestion by @kasjer
2020-03-15 18:32:02 -05:00
Peter Lawrence
e7efcb6fd5
merge with current master
2020-03-15 18:28:13 -05:00
Peter Lawrence
fb56c02a6f
NUC505 : fix operation with net_lwip_webserver
2020-03-15 17:44:09 -05:00
Peter Lawrence
5e8ff1f7c2
usb RNDIS revision on @pigrew suggestions
2020-03-15 16:05:45 -05:00
Nathan Conrad
7f6316dbe1
Use CRLF on UART.
2020-03-14 14:26:14 -04:00
Ha Thach
41d9ab5056
Merge pull request #295 from hathach/develop
...
add webserver into ci build
2020-03-10 14:33:26 +07:00
hathach
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
hathach
85a3315a99
Adding lwip_webserver to ci
...
- buil_al.py skip specific MCU if .skip.MCU_ exists
- reduce stm32f070 heap & stack size to compile webserver
2020-03-09 15:51:29 +07:00
hathach
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
hathach
c8247f0907
fix zlp for nrf52840
2020-03-08 14:20:28 +07:00
hathach
7aa5a53652
fix log printf
2020-03-08 13:26:36 +07:00
Ha Thach
5f5ee465a6
Merge pull request #291 from hathach/port-samg55
...
Port samg55
2020-03-07 16:38:59 +07:00
Peter Lawrence
d74facfd0a
usbnet RNDIS correction
2020-03-04 17:54:11 -06:00
Ha Thach
093b1381f2
Merge pull request #287 from majbthrd/usbnet
...
add CDC-ECM/RNDIS/CDC-EEM network device class with example
2020-03-03 23:59:43 +07:00
Peter Lawrence
4a4682a80a
update net class to follow API naming convention
2020-03-03 10:31:46 -06:00
Ha Thach
048f5e34dc
Merge pull request #280 from majbthrd/nuc505
...
add Nuvoton NUC505
2020-03-03 21:35:06 +07:00
Peter Lawrence
fee79d7466
add CDC-ECM/RNDIS/CDC-EEM network device class with example
2020-03-02 21:15:01 -06:00
Chang Feng
b8ea0f0a6b
Add langid support to descriptor string callback.
...
Signed-off-by: Chang Feng <chang_196700@hotmail.com>
2020-02-26 13:07:15 +08:00
Andrei Gramakov
8d84bdff21
add a number for esp32-s2
2020-02-19 12:50:36 +01:00
Peter Lawrence
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
hathach
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
hathach
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
hathach
087e3c7f56
Merge branch 'master' into port-samg55
2020-02-07 16:50:07 +07:00
hathach
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
hathach
b6b9fe42af
more log for debugging
2020-02-07 16:43:44 +07:00
Peter Lawrence
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
hathach
e2f60a5134
rt10xx: correct max endpoint count is 8
2020-01-17 17:09:23 +07:00
hathach
04d8671641
clean up, disable SOF for dcd trans since we don't use it for now
2020-01-17 12:59:00 +07:00
hathach
3208fe00b6
clean up
2020-01-17 12:06:59 +07:00
hathach
c3f4c75cfc
Merge branch 'master' into develop
2020-01-17 10:58:04 +07:00
Ha Thach
1f95f439e1
Merge pull request #274 from tannewt/dcache
...
Clean and invalidate the DCache when we have one.
2020-01-17 09:47:38 +07:00
Scott Shawcroft
cd6454a330
Add if guards for dcache flushes.
2020-01-16 17:17:49 -08:00
Kay Sievers
73228a67ef
MIDI: Add packet interface
...
This changes the internal buffering to the raw 4-byte messages. The
conversion of the messages to a byte-stream moved to the read/write
methods.
It adds a raw packet interface to send and retrieve the raw 4-byte
USB MIDI message:
static inline bool tud_midi_receive (uint8_t packet[4]);
static inline bool tud_midi_send (uint8_t const packet[4]);
MIDI USB packets carry virtual cable/wire/plug data in the packet header,
which cannot be exported in the byte-stream interface. The raw packet
interface allows to send and and receive the complete USB message.
2020-01-16 10:11:37 +01:00
Scott Shawcroft
ae68668df9
flush and invalidate the dcache
2020-01-15 21:59:15 -08:00
Ha Thach
12b191510a
Merge branch 'master' into nucbusreset
2020-01-16 11:22:33 +07:00
hathach
05fd02194e
correct return value of midid_xfer_cb
2020-01-16 11:12:26 +07:00
Ha Thach
537ceb0f65
Merge branch 'master' into line_endings
2020-01-16 10:55:14 +07:00
Peter Lawrence
2ed395bde3
nuc121: survive USB bus reset
2020-01-15 21:40:24 -06:00
Peter Lawrence
c04bc07c29
nuc121: enhanced driver and hopefully added readability
2020-01-15 20:09:50 -06:00
Nathan Conrad
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
Peter Lawrence
7f2db321bf
nuc121: better fix for handling large OUT transfers
2020-01-15 10:23:23 -06:00
Peter Lawrence
f2a5335417
nuc121: fix handling of OUT transfers larger than max packet size
2020-01-14 22:07:38 -06:00
Sean Cross
a6b916ba85
Merge pull request #269 from antmicro/volatile_buffers_fix
...
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
2020-01-15 07:02:11 +10:00
Mateusz Holenko
c1781e5e7c
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
...
This makes `rx_buffer` and `tx_buffer` *pointers*
volatile in order to avoid caching them in a register.
The original notation meant "a pointer to a volatile value"
(equivalent of `volatile uint8_t *`). This resulted in
`while(rx_buffer[ep_num] != NULL) ;` loop to get stuck
forever, even though the IRQ handler set the `rx_buffer[ep_num] = NULL`.
2020-01-14 13:57:17 +01:00
Peter Lawrence
53732805b7
CDC device: help ensure code is consistent with the size of the buffers it operates on
2020-01-11 15:31:42 -06:00
Peter Lawrence
33c715bdd0
CDC device: fix behavior for transfers that are a whole multiple of endpoint buffer
2020-01-11 14:21:43 -06:00
Ha Thach
744674bb28
Merge pull request #240 from majbthrd/master
...
implement multiple interfaces support
2020-01-11 12:23:13 +07:00
Ha Thach
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
Ha Thach
d6a8d42bd6
Merge pull request #254 from majbthrd/multi-setconfig
...
gracefully handle multiple SET_CONFIGURATION requests
2020-01-05 17:48:55 +07:00
Peter Lawrence
5c5f876461
dcd_nuc121: allow user ZLP transfers to get a callback
2020-01-04 13:36:26 -06:00
Peter Lawrence
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
majbthrd
6b3eb5f173
fix missing parentheses in TU_MIN and TU_MAX macros ( #256 )
2019-12-30 23:12:18 +07:00
Jeremy Herbert
db24b2f372
Let device respond to endpoint requests on EP0 ( #251 )
...
Since endpoint 0 is used for control requests, it doesn't have a class driver attached to it. As such, the corresponding `_usbd_dev.ep2drv` entry points to driver `0xFF`, which is invalid and this makes the `TU_ASSERT(drvid < USBD_CLASS_DRIVER_COUNT);` line fail, and eventually causes an endpoint stall. So as-is the stack cannot respond to any endpoint requests on endpoint 0.
However, standard requests on endpoint 0 do not need a class driver to produce a valid response. This commit changes the order of execution so that the assert is only checked if the endpoint is not 0.
2019-12-30 10:58:06 +07:00
Peter Lawrence
e7bf66b29e
gracefully handle multiple SET_CONFIGURATION requests
2019-12-28 16:49:52 -06:00
Peter Lawrence
ff0e7d2bed
implement multiple interfaces support
2019-12-28 14:27:32 -06:00
hathach
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
hathach
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
hathach
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
hathach
605129eb66
invoke scsi complete callback before queue for csw status
...
there is racing issue with samd + qspi flash testing with arduino
otherwise.
2019-12-24 21:24:43 +07:00
hathach
2caa1ac078
Merge branch 'master' into develop
2019-12-24 21:13:05 +07:00
hathach
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
hathach
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
hathach
421221baa5
making more progress, but failed with WRITE10
...
incorrect queue 448 bytes instead of 512
2019-12-21 23:51:57 +07:00
hathach
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
hathach
a1e55e57a4
clean warnings
2019-12-20 17:09:42 +07:00
samveen
ba8a232970
add "`" and "~" to keycode -> ASCII table
2019-12-17 12:47:05 +05:30
samveen
fdce63b268
[tusb]fix typo in comment
2019-12-16 23:01:26 +05:30
Ha Thach
7a05b177a4
Merge pull request #236 from jeremyherbert/master
...
Update dcd_stm32_fsdev.c with note about F042Fx remapping
2019-12-12 10:17:40 +07:00
Jeremy Herbert
9d96b6d66e
Update dcd_stm32_fsdev.c
...
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
hathach
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
hathach
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
hathach
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
hathach
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
hathach
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
hathach
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
hathach
988edce745
fix build
2019-12-09 18:49:38 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
Jerzy Kasenberg
4a1f7d0243
Fix mynewt osal queue definition
...
Queue table has pointers instead of data os_event structs.
This resulted in crashes when elements were put to queue and
overwritten variables that were just after mpool desiged
for queue.
2019-12-01 12:38:36 +01:00
Sean Cross
26dcc19b18
valentyusb: eptri: don't double-advance read buffer
...
Due to an error, we were double-advancing the FIFO buffer. The end
result was that the second half of most reads were getting ignored.
This wasn't found during earlier testing because only 64-byte buffers
were tested.
This corrects this error by avoiding double-advancing the buffer.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-29 18:14:23 +08:00
hathach
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
hathach
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
hathach
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
hathach
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
hathach
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
hathach
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
hathach
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
hathach
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
hathach
302746d02c
Merge branch 'develop' into port-samg55
2019-11-27 12:35:59 +07:00
hathach
fe1eadf177
fix #229
2019-11-27 12:34:30 +07:00
hathach
8a1b6327ba
extract code to invoke_class_control()
...
- also rename usbd_class_drivers to _usbd_driver
2019-11-27 12:12:52 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
Ha Thach
ca741dfc2a
Merge pull request #220 from hathach/develop
...
Port NXP iMX RT10XX
2019-11-22 15:16:41 +07:00
hathach
6123b600fc
rename dcd_lpc18_43 to dcd_transdimension
2019-11-22 14:47:07 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
fca4653b95
able to compile dcd 18/43 with rt1064
2019-11-22 12:34:41 +07:00
hathach
2ead26a12d
more clean up
2019-11-22 12:26:40 +07:00
hathach
ccb09db3b7
more clean up
2019-11-22 12:16:47 +07:00
hathach
7e16a9a1db
more constant rename clean up
2019-11-22 12:14:55 +07:00
hathach
8aacd1eacd
refactor dcd_lpc18_43, making it capatible with rt10xx
2019-11-22 12:11:13 +07:00
hathach
623b16af2e
clean up dcd lpc18_43
...
drop supporting both device mode on both ports.
2019-11-22 00:58:18 +07:00
hathach
1f52273d99
move dcd_lpc18_43.h into .c file
2019-11-22 00:38:22 +07:00
hathach
03deeea465
fix segger host example
2019-11-22 00:33:10 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
Sean Cross
a9282eab51
eptri: clear proper endpoint when opening IN port
...
When opening a USB port, we ensure the buffer is NULL and has
a length of 0.
Due to a mistake in specifying the endpoint type, we never actually
cleared the value when opening an IN endpoint. This patch fixes
the comparison when opening an IN endpoint.
This fixes issue #218 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-20 17:45:21 +08:00
hathach
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
hathach
c2fb813658
Merge pull request #217 from xobs/valentyusb-eptri
...
WIP: Add Valentyusb eptri
2019-11-18 12:37:34 +07:00
hathach
56abce44f3
Merge pull request #208 from hathach/fix-issue-207
...
Fix issue 207
2019-11-14 10:10:42 +07:00
Sean Cross
cc73990530
tusb: rename `foosn` to `valentyusb`
...
Use the name `valentyusb` as the vendor for the `valentyusb`
project, rather than the manufacturer name of the Fomu device.
This is because the `valentyusb` core can be used across multiple
vendors, much like how other cores can be used across chip vendors.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
e05e9801e4
fomu: gate debug/logging features
...
This gates the majority of the debug and logging features behind
testable macros.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
3292920933
fomu: first stable working commit
...
This appears to be stable, and works well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
1882a87212
fomu: remove reference to SETUP_CTRL.ACK
...
THis bit isn't used anymore, so remove it.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
729c8d073c
fomu: dcd_fomu: add next_ev support
...
Now that we have the `USB_NEXT_EV` register, take advantage of
it to work around issue #207 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:09:38 -08:00
Sean Cross
913032ae1d
dcd_fomu: nearly there
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
835a72c595
fomu: semi-working dcd file
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
843136d0e4
fomu: commit latest version
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
22fd7bf85e
fomu: first fully-working release
...
This is able to transfer lots of data back and forth across MSC.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
4a8475b8a7
src: add eptri to tusb
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
0559fd13fb
fomu: fix some issues with dcd_fomu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
359189ea2d
tusb_verify: add riscv assert support
...
This simply executes an "ebreak" instruction.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
32bb68409e
portable: fomu: get msc to enumerate
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
Sean Cross
36ede44885
fomu: wip support
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
hathach
fc86a308f6
clean up
2019-11-05 11:45:02 +07:00
hathach
5209091c28
Merge branch 'master' into fix-issue-207
2019-11-05 10:20:30 +07:00
hathach
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
hathach
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
hathach
3c49ff153e
Merge pull request #149 from pigrew/ZLP_Request2
...
Zlp request2
2019-11-05 00:05:21 +07:00
Nathan Conrad
8d0fa158d7
Change one more TU_ASSERT to TU_VERIFY in usbd.
2019-11-04 11:33:14 -05:00
hathach
2727983a2d
fix #211
2019-11-04 22:52:29 +07:00
Nathan Conrad
a94fe05ecb
usbd: Change TU_ASSERT to TU_VERIFY as the assertion can be hit when bad data is sent from host.
2019-11-04 08:59:29 -05:00
Nathan Conrad
c98acd3873
Use control transfer function to send control data (in usbtmc)
2019-11-04 08:54:18 -05:00
hathach
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
hathach
44ad683bd6
fix tud_control_status() didn't update request
2019-11-04 11:21:57 +07:00
hathach
65e96e5d52
added optional dcd_control_status_complete()
2019-11-03 18:00:07 +07:00
hathach
62f8c14fae
add a bit of log1 for debugging
2019-11-03 14:08:38 +07:00
hathach
7bf01e218d
make control buf static
2019-11-03 11:43:07 +07:00
hathach
1b51b78eaf
hack the request length for the first get device descriptor if EP0 size =8 or 16
...
to prevent usbd control send out ZLP
2019-11-03 00:17:17 +07:00
hathach
a0cffdc843
Merge branch 'pigrew-ZLP_Request2' into cr1901-msp430f5529
2019-11-02 23:29:35 +07:00
hathach
79fbc0b23c
wait for scsi status complete before queueing for next scsi command
...
fix #207
2019-11-01 18:43:18 +07:00
hathach
838173efc3
remove TEST_FAIL() from TU_ASSERT, since it prevents we testing how stack response with failed assert
2019-11-01 18:27:15 +07:00
hathach
d0d87d98f6
add assert to prevent div by zero
2019-11-01 18:03:43 +07:00
hathach
5b68cc91ad
adding TEST_FAIL() for TU_ASSERT()
2019-11-01 17:50:40 +07:00
hathach
164d0db825
Merge branch 'ZLP_Request2' into pigrew-ZLP_Request2
2019-11-01 10:16:59 +07:00
hathach
981e64d8a1
implement pigrew review
2019-11-01 10:07:56 +07:00
Nathan Conrad
d35f86993f
Merge remote-tracking branch 'origin/master' into ZLP_Request2
2019-10-31 12:23:54 -04:00
hathach
f58726887a
update doc, hid set report
2019-10-31 21:28:46 +07:00
hathach
cacbb80a90
zlp should work with control in, tested with Unity framework
2019-10-31 21:14:06 +07:00
hathach
6de9eb4b1a
add more tests, fix an issue with tud_descriptor_configuration_cb() return NULL
2019-10-31 13:06:57 +07:00
hathach
d9ba4d90a8
move function around, more rename
2019-10-31 12:26:36 +07:00
hathach
0029b58417
rename
2019-10-31 12:18:41 +07:00
hathach
e6857d8ee0
clean up
2019-10-31 11:25:41 +07:00
hathach
8a57997c0f
Merge branch 'master' into pigrew-ZLP_Request2
2019-10-31 09:57:52 +07:00
hathach
4d329d46cc
Merge pull request #206 from hathach/develop
...
Added a couple of unit testing with Ceedling/Cmock/Unity
2019-10-31 08:29:11 +07:00
hathach
a0002cc709
rename usbd_init() to tud_init()
2019-10-30 23:26:34 +07:00
hathach
16665672a4
initally adding test_usbd.c
2019-10-30 12:24:07 +07:00
hathach
880ac1e398
move dcd event helper to be dcd.h as inline function
2019-10-30 11:35:25 +07:00
William D. Jones
5d585c03bd
dcd_msp430x5xx: Improve comments regarding SETUP packet handling.
2019-10-29 14:08:39 -04:00
William D. Jones
3f0f7cfd07
dcd_msp430x5xx: Clarify hardware STALL behavior and current vs ideal
...
behavior of driver in comments.
2019-10-29 12:52:56 -04:00
William D. Jones
66faa96f16
tusb_option.h: Assign msp430 ID range 500+ to avoid conflict with Sony.
2019-10-29 11:33:34 -04:00
hathach
a29eb87c38
Merge branch 'ZLP_Request2' of https://github.com/pigrew/tinyusb into pigrew-ZLP_Request2
2019-10-29 18:19:10 +07:00
hathach
f6a65720e5
should fix #184
...
only response up to EP0 size with get device descriptor if not
addressed.
2019-10-29 16:25:32 +07:00
hathach
de333a6f18
clean up warning, msp430 gcc 8.3 fixed the library lto issue
2019-10-29 16:21:31 +07:00
hathach
78523301bb
Merge pull request #202 from smunaut/dfu-rt
...
Add support for DFU Runtime class for devices
2019-10-28 22:56:14 +07:00
Sylvain Munaut
ec4ecfa817
Add support for DFU Runtime class for devices
...
This is really just a few descriptors and then answering to the
request from the host to reboot into DFU mode.
That latter part is delegated to the app since this is platform
specific.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-10-28 16:11:08 +01:00
hathach
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
hathach
6ab0663c1a
adding more log
2019-10-24 12:00:06 +07:00
hathach
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
hathach
90b6b5d137
clean up tusb_verify
2019-10-18 16:38:02 +07:00
hathach
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
William D. Jones
d0146be00b
dcd_msp430x5xx: Fix typo in copy-paste in transmit_packet.
2019-10-10 04:19:48 -04:00
William D. Jones
c8e899fef0
dcd_msp430x5xx: Improve SETUP packet and EP0 NAK interactions, per
...
42.3.1.3 in Reference Manual; fix is incomplete but works.
2019-10-10 04:02:35 -04:00
hathach
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
Kamil Tomaszewski
0cea82568c
Disable/enable only USB interrupt
2019-10-08 09:58:56 +02:00
Kamil Tomaszewski
9923604221
Send SUSPEND and RESUME signals
2019-10-07 14:04:48 +02:00
Kamil Tomaszewski
b3872febe2
Disable/enable interrupt
2019-10-07 14:03:02 +02:00
Kamil Tomaszewski
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
hathach
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
William D. Jones
a01b0a73c1
Remove accidentally-commited debug var.
2019-10-03 23:59:22 -04:00