5f8f046eaa
refractor remove tusbh_msc_is_failed
...
increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device
added task for msc host freeRTOS with stack = 300 (still cannot execute copy command)
2014-02-28 18:42:33 +07:00
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
a1978e20fe
merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h
2014-02-28 15:50:04 +07:00
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
03ad1afef9
clean up warnings
2014-01-24 22:04:59 +07:00
a982a52ab3
refractor __n2be_16
2014-01-24 21:51:24 +07:00
275e834bbe
add device_os_none keil project for all boards
2013-12-27 13:40:59 +07:00
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
736cbdc276
using PINSEL_ConfigPin for setting pinsel
2013-12-13 12:41:29 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
51b6c6ff41
implement inline bit manipulation function
2013-12-12 12:21:38 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
b35acbdcb2
add some doxygen
2013-12-10 10:57:59 +07:00
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
dbfad50d43
house keeping
2013-11-20 12:21:29 +07:00
d284ecaccb
add sw int_on_complete support for dcd lpc17xx
2013-11-20 12:03:04 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
d4a260c090
refractor usbd's get descriptor
2013-11-15 15:05:23 +07:00
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
8c9def8618
clean up tusb_descriptors
2013-11-07 11:51:39 +07:00
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
60d444b452
fix a bug with USB1, but still cannot get interrupt occurred on USB1
2013-11-06 14:53:18 +07:00
58b41a05db
refractor for device able to work on usb1 of lpc43xx. But could not get it work on EA4357
2013-11-06 14:20:45 +07:00
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
c760c69d51
clean up
2013-10-30 14:16:45 +07:00
3a37dd66cc
refractor hid device
...
add check dcd_pipe_open if endpoint is already used
refractor usbd : parse and auto open class driver
2013-10-30 14:13:06 +07:00
b8a7ea6d46
add dcd control pipe stall protocol
2013-10-30 12:52:25 +07:00
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
0d9e1163df
fix osal_none timeout, instant return with OSAL_TIMEOUT_NOTIMEOUT
2013-10-27 16:48:09 +07:00
eb39d88360
rndis document
2013-10-27 15:42:31 +07:00
f941f88549
rndis document
2013-10-27 15:15:28 +07:00
76e993c45c
rndis document
2013-10-26 20:25:14 +07:00
df8d56f485
more document
2013-10-26 20:14:12 +07:00
dae4fdc04f
cdc document
2013-10-26 20:12:39 +07:00
acd69a7692
document msc
2013-10-26 19:14:06 +07:00
621cdc7013
doxygen document for msc
2013-10-26 14:12:45 +07:00
d1d2bbdf5d
update doxygen
2013-10-26 12:42:27 +07:00
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
7bf5cbc3fc
move descriptor to common folder
2013-10-25 13:46:38 +07:00
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
6c629a18fc
partially document CDC & RNDIS
2013-10-24 17:26:06 +07:00
b1142ff065
document hub
2013-10-24 17:00:04 +07:00
5f584384eb
document msc host
2013-10-24 16:47:18 +07:00
d8d00ca768
refractor HID document
2013-10-24 15:48:57 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
7f4a3fc829
ignore multiple level of hub
2013-10-01 13:23:31 +07:00
71b2859fe5
handle unplug the hub itself
2013-10-01 13:09:52 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5eebec61f1
refractor hub
2013-09-30 17:14:44 +07:00
0f05d27ac9
refractor hub
2013-09-30 16:59:41 +07:00
9ecaec67b3
refractor hub
2013-09-30 16:40:02 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
09724c5d11
refractor msch
2013-09-26 00:17:45 +07:00
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
e32e901cd1
increase usb transaction time-out as host_cmsis_rtx easily timeouted
2013-09-14 00:00:05 +07:00
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
67453b89f0
fix task def with cmsis rtx
2013-09-13 23:01:43 +07:00
ad0ef2e266
all project can run ok
2013-09-13 22:30:11 +07:00
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
09dd83c05b
add set msg & get set cmplt for OID_GEN_CURRENT_PACKET_FILTER (default = 0 reject all) to
...
○ NDIS_PACKET_TYPE_DIRECTED
○ NDIS_PACKET_TYPE_MULTICAST
○ NDIS_PACKET_TYPE_BROADCAST
2013-09-11 15:03:37 +07:00
14a8e26697
able to get blinky + greeting
2013-09-10 10:43:24 +07:00
d3e83bc802
print out mac address
2013-07-19 12:08:04 +07:00
a522263a9d
add implementation for
...
- tusbh_cdc_rndis_is_mounted
- tusbh_cdc_rndis_get_mac_addr
2013-07-19 02:30:22 +07:00
ce865721a5
add test & code to send rndis msg query for permanent address (MAC address)
2013-07-19 01:52:56 +07:00
3b12917fb0
extract send message & wait & get complete message to send_message_get_response_subtask
2013-07-14 08:33:39 +07:00
03873135a9
add some required NDIS OID define
2013-07-13 00:11:17 +07:00
0e14752c81
pass the initialize_cmplt
2013-07-06 19:06:30 +07:00
25304d142f
refractor qhd_xfer_error_isr (omit xfer_type para)
...
add accumulated total xferred byte for an endpoint until transfer with IOC set
- control xfer will have length of data phase in usbh_xfer_isr callback
2013-07-06 14:52:02 +07:00
68da489c2e
refractor ehci.c adding qhd_get_xfer_type
2013-07-06 13:41:48 +07:00
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
355fd7e648
adding subclass RNDIS-CDC driver API
...
- implement init
- close
- xfer_isr
- open
adding waiting for notification after send rndis_initalize_msg
2013-07-05 16:22:42 +07:00
e4ff63c604
fix a minor bug
2013-07-05 13:41:34 +07:00
7345a4515d
fix bug with rndis overshadow the normal cdc callback
2013-07-05 13:37:57 +07:00
374aea7a11
change usbh_control_xfer_subtask to use flat API instead of passing tusb_control_request_t struct
2013-07-05 13:23:42 +07:00
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
aed07d83db
host enum task use static control_request variable instead of literal of requests
...
increase enum task stack size from 128 to 150 as it comes dangerously close to overflow
2013-07-04 16:01:20 +07:00
0d37c4a319
refractor control request used in enumeration task to reduce task data
...
--> enum task now can work with 128 depth
2013-07-04 14:00:41 +07:00
97cbb39f6f
port osal_mutex to freeRTOS, able to mount mouse & cdc device
...
tinyusb host stack overflow though
2013-07-04 13:24:54 +07:00
391e132d6b
no big deal, only rename tusb_std_request_t to tusb_control_request_t
2013-07-04 12:25:39 +07:00
d3aed01874
add some printf when a class is mounted
...
add initial tests for rndis
2013-07-04 10:47:31 +07:00
c5afb9d50f
change class (hid/cdc) _mounted_isr to _mounted_cb
2013-07-04 09:45:20 +07:00
51e9a1817b
change some license text
2013-07-03 13:14:14 +07:00
4a8686e868
adding _mounted_isr & _umounted_isr callback for host keyboard & mouse
...
remove TUSB_EVENT_INTERFACE_OPEN & TUSB_EVENT_INTERFACE_CLOSE
2013-07-03 12:46:12 +07:00
b0f45b3651
temporarily check cdc mounted by pipe_in & pipe_out
...
add tests for tusbh_cdc_xfer_isr
2013-07-03 12:06:07 +07:00
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00
b3f98bc15a
rename cdc descriptor type
...
add tusbh_cdc_mounted_isr & tusbh_cdc_unmounted_isr
2013-07-03 10:53:16 +07:00
539c7cdbe1
update usbh_xfer_isr to take actual byte transferred and correct tests
2013-07-02 17:37:55 +07:00
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
6ce90e2bd8
add tusbh_cdc_send, t usbh_cdc_receive
...
add cdc_serial_app for virtual com demo
2013-07-02 16:41:13 +07:00
7e5c6ded2d
add tusbh_cdc_serial_is_mounted API
...
test for cdch close driver
2013-07-02 15:32:41 +07:00
b04b145965
add cdc_rndis enum & struct
2013-07-02 14:45:42 +07:00
12526b34a1
extract qhd_xfer_error_isr
...
add support for period list in xfer_error_isr
pass period TUSB_EVENT_XFER_ERROR & TUSB_EVENT_XFER_STALLED tests
2013-07-02 12:22:46 +07:00
9fea5291bf
refractor extract list_next
...
add support for TUSB_EVENT_XFER_STALL
add test for error/stall in periodic list
2013-07-02 12:01:51 +07:00
958d390a85
refractor code
2013-07-01 20:28:16 +07:00
3f9f3f08d2
add cdc host driver close cdch_close
...
refractor
- add helper function in ehci qhd_next & qtd_next
- extract function qhd_create_pipe_handle
rename tusb_transfer_type_t to tusb_xfer_type_t
add some handling for stall
2013-07-01 18:53:25 +07:00
d8bd749c75
change control xfer check in usbh_xfer_isr
...
rename
- async_list_process_isr to async_list_xfer_complete_isr
- period_list_process_isr to period_list_xfer_complete_isr
extract function void qhd_xfer_complete_isr(ehci_qhd_t * p_qhd, tusb_transfer_type_t xfer_type)
2013-07-01 16:14:46 +07:00
3f0d740776
rename usbh_isr to usbh_xfer_isr
2013-07-01 15:30:29 +07:00
35adca5ba3
house keeping
2013-07-01 11:37:53 +07:00
e1883fcd26
add acm_capability saving to host data & its test
2013-07-01 11:29:23 +07:00
e94ce81b04
fix compilation error
2013-07-01 10:43:55 +07:00
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
a943cce991
test refractor
2013-06-29 21:00:33 +07:00
9e607f6dee
add SUBTASK_EXIT in osal.h for TDD project
2013-06-29 16:20:24 +07:00
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
d4f31e149a
adding descriptor, structure, enum support for cdc
2013-06-29 15:56:32 +07:00
a07ff5a3ce
use SUBTASK_EXIT to restart & exit task without "assert"
2013-06-27 16:32:54 +07:00
3bca56665c
add mutex support for osal
...
add test for mutex in test_osal_none.c
implement usbh_control_xfer using mutex to get access to queue xfer on control pipe
(while semaphore is used to sync with hcd DMA)
failed to issue control xfer: set idle & get report descriptor in hidh_open_subtask (more to work on)
2013-06-27 16:19:22 +07:00
c81c4bb817
add set idle request for hidh_open_subtask
...
add interface number to hidh_interface_info_t
refractor hidh_open_subtask to be a true subtask
cannot run with set idle code ON because of semaphore misuse
2013-06-27 03:20:14 +07:00
ea2e63a332
remove app_os_prio.h in os_none configure
...
remove instance_num in hidh API
temporarily pause device stack developement
should fix travis-ci build error
2013-06-26 18:00:05 +07:00
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
fe53297b17
fix bug with custom class that terminate xfer after the first QTD
2013-06-22 22:26:00 +07:00
54c065b1d5
fix license
2013-06-22 12:54:47 +07:00
07f36e8a61
fix a stupid bug
2013-06-21 14:52:18 +07:00
5c564df8c1
add api for hcd: hcd_pipe_is_idle
...
add api for usbh: tusbh_device_get_mounted_class_flag
implement api for custom class
- is mounted
- read
2013-06-21 14:20:08 +07:00
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
743e5a7a93
house keeping
2013-06-16 15:39:09 +07:00
4d6121d44a
refractor set endpoint max packet size
2013-06-16 15:32:08 +07:00
357e8d32ec
clean up some & add code for managing control request targeting interface
2013-06-16 14:41:48 +07:00
77e0834f34
use dcd_pipe_control_read in endpoint_control_isr
2013-06-14 19:10:11 +07:00
f219a9c77d
add dcd_pipe_control_read
2013-06-14 19:06:33 +07:00
40b65b265c
implement hidd_control_request including std & class specific to interface number.
...
refractor usbd_setup_received
2013-06-14 18:22:40 +07:00
4103cc374f
add coreid to hidd_init
...
temporarily implement hidd_init using dcd from lpc17xx
add more test for dcd lp176x
implement dcd_endpoint_configure
2013-06-12 21:06:43 +07:00
ee57a6f13f
clean up
2013-06-12 14:06:41 +07:00
17a27f7398
[lpc176x][device] pass set configure control request
2013-06-11 17:53:33 +07:00
5ae9c72f84
[lpc176x][device] get pass get string descriptors
2013-06-11 17:35:53 +07:00
cae19b8f56
fix bug with setup packet received (wrong increasement of pointer)
2013-06-11 17:12:44 +07:00
049a22f2cc
refractor dcd_pipe_control_write_zero_length to use dcd_pipe_control_write
2013-06-11 16:30:06 +07:00
d55f9ecef1
get pass set address
2013-06-11 16:13:50 +07:00
72b5b61597
able to xfer device descriptor on control endpoint of lpc176x
2013-06-11 16:01:30 +07:00
503d279af5
ADDING LPC176X device
...
implementing dcd_lpc175x_6x.c
add usbd_dcd.h
add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event
parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0)
--> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor).
uncomment write zero length will cause issue, no more interrupt ?
2013-06-08 02:50:10 +07:00
e3bb5e9f2f
change buffer_start_addr from uint8_t* to uint32_t due to travis linux 64bit
2013-06-05 11:56:55 +07:00
f69fefefa9
added dcd_dma_descriptor_t typdef
...
reorganize test project, multiple test projects each is specifically for an MCU
2013-06-05 11:23:41 +07:00
3394b4beaa
re-create ngx4330.h
...
remove some rom driver dependency on upper layer
introduce CAP_DEVICE_ROMDRIVER to overwrite TUSB_CFG_DEVICE_USE_ROM_DRIVER within the lib
add support for lpc175x_6x
- able to build and blink led on lpcxpresso1769 with device (without any class enabled)
2013-06-04 13:36:18 +07:00
cdc830782f
rename tusb_device_is_configured
...
remove dcd_lpc18xx_lpc43xx.h and dcd_lpc11uxx_lpc13xx move define to hal
2013-06-04 10:43:58 +07:00
a3ed66344d
fix compiler bug with ceedling tests
2013-06-03 16:40:02 +07:00
9f9adca03b
add TUSB_CFG_PROUDCT_ID check
...
move USB_MAX_EP_NUM to device dependency
- lpc43 --> 6
- lpc11/13 --> 5
2013-06-03 15:56:14 +07:00
52f18f3784
refractor device mouse main.c & tusbd_hid_mouse_send_report
2013-06-03 14:37:41 +07:00
b527e6ec4a
refractor tusb_descriptors
...
usbd device_class_driver
added & tested HID mouse for device (work together with hid keyboard)
rename DEVICE_ROM_REG_BASE, DEVICE_ROM_DRIVER_ADDR
2013-06-03 14:31:17 +07:00
7d78fc1baf
rename romdriver handle
...
forming API for USBD-CLASS driver (abstract away from rom driver)
separate buffer of hid class from buffer of core driver
2013-06-01 21:54:08 +07:00
9e49056721
refractor change tusbd_hid_keyboard_send_report API
2013-05-31 21:24:40 +07:00
03d85acfc7
refractor string descriptors, allow one-stop configure descriptor for
...
- manufacturer, product etc ... (only english now)
2013-05-31 18:21:31 +07:00
ed64401e61
rename descriptor variables
2013-05-31 14:42:38 +07:00
3b9a616ca9
change at86rf to 1ghznode
...
rom device runs ok with lpc11uxx
2013-05-31 13:57:57 +07:00
04a641f067
ea4357 can be enumerated, but get setconfiugre value of 0
2013-05-29 16:56:15 +07:00
d5836751d9
keyboard example works with lpc1347 xpresso
2013-05-29 15:23:07 +07:00
dda0808ebb
fix lpcxpresso1347 board_leds
...
temp change USBD_API to ROM_API
add lpc13xx device support
fix romdriver pointer
able to init rom driver
2013-05-29 14:39:14 +07:00
1e5bd82af2
rename NGX to ngx
...
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx)
add dcd_nxp_romdriver for handling usb rom driver
add BIT_TEST_ in binary.h
remove mw_usbd_hid.h include due to lexical conflict
2013-05-28 15:24:27 +07:00
ed217948b8
rename descriptor type, hid descriptor type
2013-05-25 17:19:18 +07:00
ae02263d81
add stub function to able to build device with EA4357
...
- dcd_controller_reset
- dcd_controller_connect
2013-05-25 16:03:40 +07:00
132c3996ea
move scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2) to hal/hal_lpc43xx.c
...
dual host run without problem with mcb4300
2013-05-23 14:56:11 +07:00
94fc55ba2c
fix host build error (problem with conflict name in hid.h)
2013-05-23 13:29:46 +07:00
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
d7ae21203c
fix issue with osal_none queue def
2013-05-21 17:57:21 +07:00
40503b913b
abstract os priority for application tasks
2013-05-14 21:32:13 +07:00
f8d1c3da3e
rename tusbh_hid_keyboard/mouse_is_supported to tusbh_hid_keyboard/mouse_is_mounted
2013-05-14 03:03:54 +07:00
cc49607434
test refractor
2013-05-12 19:32:32 +07:00
81780008e9
add cardinality_of function to return number of set bits
...
refractor tests in ehci
2013-05-11 00:40:21 +07:00
327519a5a6
refractor test
...
try to add travis-ci
2013-05-09 13:48:11 +07:00
63add70139
test clean up
2013-05-09 12:49:52 +07:00
861f02943d
add log2_of and use this function in get_period_head
2013-05-06 20:51:34 +07:00
41fee0f488
house keeping
2013-05-06 20:25:38 +07:00
fd49cff8e8
add stub for msc host & hub driver
2013-05-06 20:09:06 +07:00
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
fdd98e2fa9
clean up main
2013-04-28 00:00:48 +07:00
38172d3d3c
fix bug with osal_queue for freeRTOS
...
implement process mouser report to clarify mouse app task
2013-04-27 16:40:18 +07:00
4db386525f
reduce delay after reset to 20ms
...
correct freeRTOS configCPU_CLOCK_HZ to correct M4 mcu clock
2013-04-27 14:17:06 +07:00
8bd077fa5c
fix bug (wrong logic) with osal_task_delay in non OS configure
...
complete keyboard app with key state & event TODO handle & check for non-printable(control) keycode
add unit test for osal_task_delay for non OS
2013-04-27 00:24:15 +07:00
33feba5cbc
add hid_keycode_to_ascii_tbl for hid class
...
improve keyboard_app, should display all displayable characters
improve the de-bouncing keyboard (still got some issues)
2013-04-26 02:08:22 +07:00
c0104b996e
implement hcd_port_speed_get
...
move port reset & speed detection from isr context to usbh enumeration task
- decrease time in isr significantly from 50 ms to 580us
fix bug with osal_task_delay for freeRTOS buil
2013-04-25 17:48:55 +07:00
3763e22c9a
change OSAL_TASK_DEF to decouple variable name with task name
...
implement osal_task_delay for freeRTOS & non_os
getting both no_os & freertos running with mouse + keyboard
2013-04-25 16:41:00 +07:00
1ae5484320
finally able to get freeRTOS run with current mouse + keyboard example
...
NOTES: print_greeting if is executed before the start of freeRTOS scheduler --> hardfault
- print_greeting->vsprintf->systick -> bunch of ISR --> hardfault.
printf using serial after the start of scheduler is ok though
2013-04-25 15:43:33 +07:00
92994c8192
add attribute warn unused result for osal_create_* function
...
taskify keyboard_app mouse_app & led_blinking
2013-04-25 11:55:24 +07:00
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
d4a2600ecc
- change OSAL_TASK_FUNCTION to have void* parameter (to be consistent with most popular RTOS)
...
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
2013-04-24 17:53:43 +07:00
574710dde5
move main work in usbh_enumeration_task to its body subtask for task_assert style
2013-04-24 13:45:42 +07:00
d312be7006
fix potential error with usbh_control_xfer_subtask in subtask_assert
...
change back to use task_assert style in usbh_enumeraion
change test to task->subtask->subtask style in test/test_osal_none.c
2013-04-24 12:20:56 +07:00
73d5f00a40
rename OSAL_TASK_DECLARE to OSAL_TASK_FUNCTION
...
removing TASK_ASSERT to avoid using goto/continue statement with rtos configure
2013-04-23 15:35:27 +07:00
c20071c55c
fix compiler error for USB1 to none in ehci.c
...
rename and moving bsp ea4357
2013-04-22 11:00:43 +07:00
3f9a73a34d
change config to use USB0 only
...
fix some compiler warnings
2013-04-22 10:44:51 +07:00
ee9d53477a
complete the support for correct polling of 1ms 2ms 4ms 8ms
2013-04-21 16:24:42 +07:00
a493fab753
separate fake ehci's run async & period list
...
refractor list_find_previous_item & list_remove_qhd to act on ehci_link_t* instead of ehci_qhd_t*
fully support 1ms, 2ms, 4ms, 8ms for period list (each list has a dummy queue head)
- change period list structure
limit the maximum polling interval to 256 ms
add max_loop static MAX number of iteration for list_find_previous_item
add test for close 256ms polling interrupt
2013-04-21 15:09:54 +07:00
357888a5e5
rename nxp_sof_received to nxp_int_sof
...
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
2013-04-21 00:28:25 +07:00
a9010c1786
getting build with freertos & host demo
2013-04-16 16:48:19 +08:00
fffe8b547d
- ehci: free error TD for recovery
2013-04-10 02:40:09 +07:00
2d7fbb5153
change keyboard_app.c & mouse_app.c from polling API to interrupt-based (callback isr)
...
and using OSAL for task-base demo
- fix ehci error with XFER_COMPLETE callback to usbh_isr, TD need to be freed & unlink before invoking
callback
- fix bug in usbh.c set device state to CONFIGURED right after SET_CONFIGURE control xfer
2013-04-10 02:34:40 +07:00
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data)
...
- support any size queue message (instead of fixed uint32_t)
2013-04-10 01:18:32 +07:00
e6a44b3fe9
add test & code for TUSB_EVENT_INTERFACE_OPEN for tusbh_hid_keyboard_isr tusbh_hid_mouse_isr
2013-04-09 13:28:07 +07:00
a6cf4f228e
add tusbh_hid_mouse_isr & tusbh_hid_keyboard_isr callback with xfer_complete & error event
2013-04-09 03:13:27 +07:00
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1)
...
add back port reset after get 8 bytes of device descriptor
2013-04-09 02:13:18 +07:00
94e25880dc
- add scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence
...
- USB1 host run ok with NGX4330
2013-04-08 14:57:00 +07:00
ef850984da
move MCU define to tusb_option.h, fix the ATTR with USB RAM
...
hack: add delay before the very first xfer when enumerating (finalize later
after reading USB 2.0 specs)
2013-04-08 03:45:31 +07:00
4b63a2bc5c
- fix HID_MOUSEBUTTON right & left
...
- add mouse app to mount mouse interface
2013-04-07 19:33:40 +07:00
dfe2b94248
refractor extract hidh_interface_get_report from keyboard_get_report
2013-04-07 18:38:32 +07:00
ff63a86a4d
add complete isr for hidh mouse
...
refractor hid_host.c
- extract hidh_interface_open from hidh_keyboard_open
- extract hidh_interface_close from hidh_keyboard_close
-
2013-04-07 18:29:30 +07:00
058e2a9837
add test code & implement
...
- hidh_mouse_open
- tusbh_hid_mouse_status
- tusbh_hid_mouse_get_report
2013-04-07 18:10:01 +07:00
10c08ab404
add test for mouse_open
...
add hid descriptor for mouse & mouse interface to descriptor_test
refractor extract function hidh_interface_status
fix error with MACRO HID_REPORT_ITEM with zero data size --> redundant semicolon
2013-04-07 15:48:01 +07:00
3d8a4ef8c8
remove hcd_port_reset before set address in enumeration
...
add test & implement tusbh_hid_mouse_is_supported
2013-04-07 14:44:53 +07:00
27f860db9f
rename hidh_keyboard_info_t to hidh_interface_info_t
...
rename tusb_bus_event_t to tusb_event_t
add test_mouse_init and more stuff for hidh mouse
move delay after port reset to only for speed detection
prioritize port change interrupt over xfer interrupt
- in case of unplugged, current connect change & xfer error both set
- xfer error only break to debugger if not because of unplugged
fix bug: set dev addr0 state to UNPLUG after close its control pipe in enumeration process
2013-04-07 05:09:18 +07:00
24ade0458e
fix compiling error for tests project
...
start to add support for host hid mouse
2013-04-07 03:53:53 +07:00
1776bb53f6
add hal init for USB1 and trying to get USB1 working
...
add hack delay 100 ms after a port reset (huge) for correct speed detection
2013-04-07 03:40:24 +07:00
68dddefe7b
add control xfer for ehci controller fake: ehci_controller_control_xfer_proceed
...
refractor test code
2013-04-05 14:00:37 +07:00
fcb8e295ec
clean up, update tests for hcd_port_reset after 8 byte descriptor & set configure before open class driver
2013-03-29 23:37:59 +07:00
e658e67ebe
fix the damn bug within 10 line of code in keyboard_app.c
2013-03-29 00:20:27 +07:00
7b5d9edc5a
add test for pipe_interrupt_xfer
...
implement keyboard app code
- forcefully place keyboard_report in RAM section 3
change used bit in qtd from reserved in buffer[1] to alternate link
add code for fake ehci controller runs on period interrupt
change signature of tusbh_hid_keyboard_get_report
- tusb_keyboard_report_t* to uint8_t*
implement period (interrupt) complete isr processing
2013-03-27 11:51:44 +07:00
b0ff7a7e23
add code & test for hidh_isr (set status for keyboard)
2013-03-26 17:04:55 +07:00
ac905a8d09
rename pipe_status_t to tusb_interface_status_t
...
add tusbh_hid_keyboard_status & test code
2013-03-26 16:39:25 +07:00
0b08dc7724
fix bug with enum task skipping decriptor
2013-03-26 14:18:14 +07:00
205a21ff04
add code for hidh close
...
refractor the full configure descriptor parsing in enum task
2013-03-26 13:45:14 +07:00
3c767e9f44
add field to endpoint maxpacketsize (mult)
...
refractor hidh_open_subtask & hidh_keyboard_open
add ATTR_PACKED_STRUCT(x)
- TODO remove ugly pre_pack & post pack
2013-03-26 13:07:42 +07:00
03d045ecde
- put ATTR_UNUSED to hardfault handler variables to discard compiler warning
...
- change host_class_driver_t: open_subtask signature to accept tusb_descriptor_interface_t const * instead of uint8_t*
2013-03-26 12:14:04 +07:00
54acee1fc8
start merge hidh_keyboard back to hidh
2013-03-26 11:41:41 +07:00
a7e8a2ba9a
pass all the current tests
2013-03-26 02:06:30 +07:00
086a8e4a2d
add flag_supported_class to usbh_devices
...
remove all ATTR_WEAK in init,open,isr,close driver functions of USBH-CLASS API
- prefer testing
2013-03-26 02:02:54 +07:00
ff03b452d9
remove multiple instances per device for hidh keyboard (no needed)
...
- API retain though
2013-03-25 22:06:00 +07:00
a2031e6218
refractor hidh_keyboard_open
2013-03-25 20:57:27 +07:00
f5e7644a1e
fix const discard warning
2013-03-25 18:07:33 +07:00
2622cc487b
add more test and complete keyboard open
2013-03-25 17:57:33 +07:00
d0a73f4b0d
add several helper function
...
add test & code for hidh_keyboard_open_subtask
- skip parsing HID descriptor for keyboard
2013-03-25 17:39:22 +07:00
c026a9f2e0
remove obsolete TUSB_CFG_HOST_HID_KEYBOARD_ENDPOINT_SIZE
...
temporarily ignore test for hid_host.c due to ceedling linking issue with weak symbol
implement hidh_open_subtask driver to subclass open
rename hidh_keyboard_install to hidh_keyboard_open_subtask
2013-03-25 16:02:24 +07:00
45db7b4a53
able to build test hidh
...
hack include in hid_host_keyboard.h
2013-03-25 13:51:44 +07:00
ddeec330fa
separate hidh_keyboard from hid_host
...
move test hid related to its own folder
2013-03-25 13:08:40 +07:00
56cd8be75e
change website from tinyusb.net to tinyusb.org
2013-03-25 11:46:30 +07:00
20a22d956d
changing the hcd_pipe_close behavior
...
- bulk/int/iso pipe can only be closed as part of unmount/safe remove process
add test for interrupt_close
2013-03-25 11:04:37 +07:00
b15694bc5f
fix potential bug when insert new queue head to list
2013-03-24 22:24:27 +07:00
62f5ec8a0f
period_frame_list0 is not existed if period list is not required
2013-03-24 21:53:41 +07:00
c7c993d6cc
refractor hidh keyboard
...
changing class hidh behavior
2013-03-24 21:40:49 +07:00
a1b17be681
add class flags
...
change keyboard_info_pool to keyboard_data
2013-03-24 17:29:07 +07:00
92c137243d
refractor
...
- rename usbh_device_info_pool to usbh_devices
- create a struct for control pipe in usbh_device_info_t
2013-03-24 16:44:59 +07:00
ea04815bbc
rename sem_hdl in usbh_device_info_t control_sem_hdl
2013-03-24 16:22:58 +07:00
55ce5cc4a2
add TUSB_DEVICE_STATE_INVALID_PARAMETER to tusb_device_state_t
2013-03-24 16:05:50 +07:00
439a3134b9
refractor
...
- rename tusbh_device_status_get to tusbh_device_get_state
- replace tusbh_device_status_t by tusb_device_state_t
2013-03-24 16:02:45 +07:00
ce63980386
clean up:
...
- refractor tusb_handle_device_t device_hdl to uint8_t dev_addr
add keyboard_app.c/h
2013-03-24 15:50:49 +07:00
e6630af5a4
clean up
2013-03-23 23:43:25 +07:00
0c5e0ef0f3
- add control_pipe_status for usbh_device_info_t to reflect the status transfer of control pipe
...
- fix bug with hcd_port_reset
+ remove regs->portsc_bit.port_enable in the wait loop as device unplugged can cause this to always fails
- correct the timeout for hcd_controll_stop/reset 16 uframes ~ 2 ms
- potentially fix bugs device unplugged when new address is not assigned
2013-03-23 18:36:43 +07:00
44e09cc397
enhance some tests
...
add test for usbh_isr error invoke
fix bug if device unplugged before is set to new address
- clean up & close control addr0 in usbh_device_unplugged_isr
2013-03-23 17:31:51 +07:00
4adfc6a6d8
change signature usbh_isr to add tusb_bus_event_t parameter
...
change singature of call_isr as well
2013-03-23 15:00:56 +07:00
e6b8166a58
house keeping
2013-03-23 14:27:32 +07:00
e14864759d
refractor
...
- rename TUSB_DEVICE_STATE_READY to TUSB_DEVICE_STATE_CONFIGURED
- move device_state to core/tusb_types.h
- remove usbh_device_hcd_data_cleaned_up_cb, hcd now set the state directly
2013-03-23 12:13:02 +07:00
d7ba86c85e
refractor
...
- rename usbh_device_info_t.status to state
- rename enum TUSB_DEVICE_STATUS_* to TUSB_DEVICE_STATE_*
2013-03-23 11:34:51 +07:00
0c6d406ddf
- house keeping
...
- add controller id for hal_interrupt_enable/disable
2013-03-23 10:56:41 +07:00
ae9b9ead7a
continue clean up ehci
2013-03-23 10:23:37 +07:00
58b252b3f1
clean up ehci
2013-03-23 10:14:47 +07:00
8beb749761
clean up
2013-03-23 09:57:08 +07:00
660440d69c
refractor extract to function qtd_remove_1st_from_qhd
2013-03-23 02:56:17 +07:00
eddaa8394b
fix issue with Interrupt Async Advance
...
- only acknowledge interrupt that we check
2013-03-23 02:51:41 +07:00
53a4164b39
use DO PING for highspeed out bulk
2013-03-22 21:50:07 +07:00
397d62db10
fix bug: adjust all bulk queue head from ehci_data.device
2013-03-22 21:21:00 +07:00
f6acca6664
add callback for hcd when it cleaned up all cache data for a device (previously mark as removing).
2013-03-22 18:55:45 +07:00
dbaf6c0d30
- fix bug when unplugged unmounted-already device (mostly plugged when power on)
...
- add hal_debugger_is_attached & hal_debugger_breakpoint
- assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed
- fix get control qhd function when dev_addr is not zero (shifted 1)
- fix wrong logic for unsupported class
2013-03-22 17:08:51 +07:00
cd2915e78c
house keeping
2013-03-13 21:45:06 +07:00
9bc30f7694
add some test for usbh_hcd integration
...
- add tests for pipe_close (while TDs are active)
- add tests for device unplugged
add tesst & implement the async_advance_isr to clean up "REMOVING" queue head
- add helper find previous qhd
- add remove qhd from async list
- add is_removing field for async advance isr to clean up
add pipe close for control pipe & bulk pipe (with tests)
add helper get qhd from pipe_handle
2013-03-13 21:42:19 +07:00
dbd3d9618d
refractor rename field inactive_next_xact of ehci_qhd_t
2013-03-13 12:29:44 +07:00
1a932e7437
refractor ehci test files
...
adding some code for async_advance_isr
add test for async_advance_isr
2013-03-13 12:25:27 +07:00
97c436a16e
add usbh_pipe_control_close (in conjunction with usbh pipe control open)
...
close control pipe when unplugged
2013-03-13 11:20:02 +07:00
97c9001d40
add hard fault handler to bsp.c
...
rename class_install_subtask to class_open_subtask
add class_close for unmount
adding code for usbh_device_unplugged_isr & invoke it in hcd_isr
2013-03-13 10:57:30 +07:00
63765b37c7
forget to add test file for ehci isr
2013-03-13 00:17:02 +07:00
79e277d323
go through all the enumeration (up to get full configuration)
...
- fix init_qhd for address 0 (clear queue head --> ehci controller halted)
- fix bug in usbh_init missing address0 for semaphore create
TUSB_CFG_DEBUG == 3: --> ATTR_ALWAYS_INLINE is null --> allow gcc to export "normal inline" function
2013-03-13 00:02:45 +07:00
hathach