kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

remove immediately reset when device plug. 

check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
This commit is contained in:
hathach 2013-12-19 13:55:22 +07:00
parent cfcef0558a
commit d020c2f609
4 changed files with 21 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
demos/host/src/tusb_config.h
View File

@ -60,14 +60,14 @@
//--------------------------------------------------------------------+
// HOST CONFIGURATION
//--------------------------------------------------------------------+
#define TUSB_CFG_HOST_DEVICE_MAX 1
#define TUSB_CFG_HOST_DEVICE_MAX 3 // TODO be a part of HUB config
#define TUSB_CFG_CONFIGURATION_MAX 1
//------------- USBD -------------//
#define TUSB_CFG_HOST_ENUM_BUFFER_SIZE 255
//------------- CLASS -------------//
#define TUSB_CFG_HOST_HUB 0
#define TUSB_CFG_HOST_HUB 1
#define TUSB_CFG_HOST_HID_KEYBOARD 0
#define TUSB_CFG_HOST_HID_MOUSE 1
#define TUSB_CFG_HOST_HID_GENERIC 0

11
tinyusb/host/ehci/ehci.c
View File

@ -154,11 +154,11 @@ void hcd_port_reset(uint8_t hostid)
regs->portsc_bit.port_enable = 0; // disable port before reset
regs->portsc_bit.port_reset = 1;
#ifndef _TEST_
// NXP specific, port reset will automatically be 0 when reset sequence complete
// there is chance device is unplugged while reset sequence is not complete
while( regs->portsc_bit.port_reset) {} // TODO use task delay to remove blocking
#endif
//#ifndef _TEST_
// // NXP specific, port reset will automatically be 0 when reset sequence complete
// // there is chance device is unplugged while reset sequence is not complete
// while( regs->portsc_bit.port_reset) {} // TODO use task delay to remove blocking
//#endif
}
bool hcd_port_connect_status(uint8_t hostid)
@ -570,6 +570,7 @@ static void port_connect_status_change_isr(uint8_t hostid)
// NOTE There is an sequence plug->unplug->…..-> plug if device is powering with pre-plugged device
if (regs->portsc_bit.current_connect_status)
{
// hcd_port_reset(hostid);
usbh_hcd_rhport_plugged_isr(hostid);
}else // device unplugged
{

2
tinyusb/host/ohci/ohci.c
View File

@ -666,7 +666,7 @@ void hcd_isr(uint8_t hostid)
{
if ( OHCI_REG->rhport_status_bit[0].current_connect_status )
{
OHCI_REG->rhport_status[0] = OHCI_RHPORT_PORT_RESET_STATUS_MASK;
// OHCI_REG->rhport_status[0] = OHCI_RHPORT_PORT_RESET_STATUS_MASK; // reset port immediately
usbh_hcd_rhport_plugged_isr(0);
}else
{

18
tinyusb/host/usbh.c
View File

@ -370,14 +370,19 @@ tusb_error_t enumeration_body_subtask(void)
usbh_devices[0].hub_port = enum_entry.hub_port;
usbh_devices[0].state = TUSB_DEVICE_STATE_UNPLUG;
//------------- connected/disconnected directly with roothub -------------//
if ( usbh_devices[0].hub_addr == 0)
{ // connected/disconnected directly with roothub
{
if( hcd_port_connect_status(usbh_devices[0].core_id) )
{ // connection event
osal_task_delay(200); // wait for port reset is complete & device is stable
// hcd_port_reset( usbh_devices[0].core_id ); // port must be reset to have correct speed operation
// osal_task_delay(50); // TODO reset is recommended to last 50 ms (NXP EHCI passes this)
usbh_devices[0].speed = hcd_port_speed_get( usbh_devices[0].core_id );
osal_task_delay(200); // wait until device is stable
if ( !hcd_port_connect_status(usbh_devices[0].core_id) ) SUBTASK_EXIT(TUSB_ERROR_NONE); // exit if device unplugged while delaying
hcd_port_reset( usbh_devices[0].core_id ); // port must be reset to have correct speed operation
osal_task_delay(50); // USB Specs: reset is recommended to last 50 ms
usbh_devices[0].speed = hcd_port_speed_get( usbh_devices[0].core_id );
}
else
{ // disconnection event
@ -386,8 +391,9 @@ tusb_error_t enumeration_body_subtask(void)
}
}
#if TUSB_CFG_HOST_HUB
//------------- connected/disconnected via hub -------------//
else
{ // connected/disconnected via hub
{
//------------- Get Port Status -------------//
OSAL_SUBTASK_INVOKED_AND_WAIT(
usbh_control_xfer_subtask( usbh_devices[0].hub_addr, bm_request_type(TUSB_DIR_DEV_TO_HOST, TUSB_REQUEST_TYPE_CLASS, TUSB_REQUEST_RECIPIENT_OTHER),