hathach
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
hathach
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
hathach
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
hathach
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
hathach
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
hathach
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
hathach
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
hathach
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
hathach
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
hathach
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
hathach
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
hathach
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
hathach
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
hathach
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
hathach
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
hathach
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
hathach
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
hathach
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
hathach
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
hathach
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
hathach
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
hathach
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
hathach
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
hathach
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
hathach
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
hathach
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
hathach
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
hathach
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
hathach
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
hathach
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
hathach
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
hathach
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
hathach
9cb99d3716
house keeping
2013-11-08 19:37:26 +07:00
hathach
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
hathach
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
hathach
3945869cc2
refractor tusb_descriptor, adding support for cdc descriptor
2013-11-07 12:28:10 +07:00
hathach
8c9def8618
clean up tusb_descriptors
2013-11-07 11:51:39 +07:00
hathach
f1d47702e8
refractor mouse dev app
2013-11-06 20:06:28 +07:00
hathach
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
hathach
60d444b452
fix a bug with USB1, but still cannot get interrupt occurred on USB1
2013-11-06 14:53:18 +07:00
hathach
58b41a05db
refractor for device able to work on usb1 of lpc43xx. But could not get it work on EA4357
2013-11-06 14:20:45 +07:00
hathach
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
hathach
024858a605
complete msc device demo with 8KB ram disk
2013-11-05 14:55:58 +07:00
hathach
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
hathach
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
hathach
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
hathach
f797c4e02a
rename device project
2013-11-01 12:17:54 +07:00
hathach
077b6defe9
rename device project
2013-11-01 12:13:31 +07:00
hathach
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
hathach
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
hathach
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
hathach
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
hathach
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
hathach
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
hathach
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
hathach
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
hathach
a98bae0d19
enhance serial host app
2013-10-27 20:56:41 +07:00
hathach
1d28b2bd10
refractor cdc serial host app.
...
fix RTOS cdc_serial_app_task executing forever
2013-10-27 20:44:06 +07:00
hathach
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
hathach
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
hathach
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
hathach
86b3e3174d
refine mouse demo
2013-10-16 12:05:48 +07:00
hathach
f28d2d1189
add supported class to greeting
2013-10-15 12:39:11 +07:00
hathach
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
hathach
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
hathach
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
hathach
ef83b8e10a
wrap up msc demo
2013-10-01 17:05:02 +07:00
hathach
fffd613897
enhance cd command
2013-10-01 16:36:52 +07:00
hathach
18b3179bc6
refractor msc host app examples
2013-10-01 16:11:34 +07:00
hathach
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
hathach
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
hathach
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
hathach
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
hathach
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
hathach
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
26f75d6cac
house keeping
2013-09-26 15:35:15 +07:00
hathach
238afb474f
house keeping
2013-09-26 15:15:16 +07:00
hathach
a6726f7d39
added mkdir command
2013-09-26 15:08:49 +07:00
hathach
0268e0b787
added clear screen command
2013-09-26 15:04:02 +07:00
hathach
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
hathach
4bdede53eb
refractor cli error handling
...
add cat command
2013-09-26 11:27:48 +07:00
hathach
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
hathach
b995e25308
enable long filename
2013-09-25 20:44:18 +07:00
hathach
89898acd5d
almost complete cli for msc
2013-09-25 19:52:05 +07:00
hathach
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
hathach
cf65f859be
working on fatfs integration
...
fix retarget input for lpcxpresso
2013-09-25 11:23:53 +07:00
hathach
bd9af2d57b
added cli support
2013-09-24 21:04:56 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
hathach
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
hathach
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
hathach
2db5fcdf0a
update keil project for freertos & cmsis
2013-09-21 01:05:54 +07:00
hathach
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
hathach
d8907c9a2b
IAR host none project working
2013-09-19 18:18:05 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
hathach
9d87a1c62b
temporarily comment out all the lwip related code
2013-09-18 21:08:48 +07:00
hathach
1cd2d5cf36
able to build with newly added lwip folder
2013-09-16 16:38:46 +07:00
hathach
0c97131149
start to add lwip support
2013-09-14 15:24:59 +07:00
hathach
765ce19be1
update cmsis rtx keil project for LPC4357USB
2013-09-13 23:37:09 +07:00
hathach
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
hathach
ad0ef2e266
all project can run ok
2013-09-13 22:30:11 +07:00
hathach
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
hathach
1f573eecf2
added keil project for host_freertos
2013-09-12 15:55:54 +07:00
hathach
968c218f33
Merge branch 'master' of github.com:microbuilder/tinyusb
...
Conflicts:
demos/host/host_os_none/host_os_none.uvopt
2013-09-12 14:44:02 +07:00
hathach
ad5ce98c02
finshed upgrading lpc43xx cmsis
2013-09-12 14:42:08 +07:00
hathach
8a8537d7e5
updating lib *.c
2013-09-12 14:27:22 +07:00
hathach
239864c6cf
update history & freertos project
2013-09-12 14:20:22 +07:00
hathach
0769643814
update header files
2013-09-12 14:06:59 +07:00
hathach
dc6f6e3b3e
rename lpc43 cmsis folder, preparing to upgrade cmsis from v2.10 to 3.01
2013-09-12 13:58:33 +07:00
hathach
09dd83c05b
add set msg & get set cmplt for OID_GEN_CURRENT_PACKET_FILTER (default = 0 reject all) to
...
○ NDIS_PACKET_TYPE_DIRECTED
○ NDIS_PACKET_TYPE_MULTICAST
○ NDIS_PACKET_TYPE_BROADCAST
2013-09-11 15:03:37 +07:00
Kevin Townsend
50d0e9bb8d
Apply power to USB
2013-09-10 09:20:59 +02:00
Kevin Townsend
3e54ab7c9e
Added trace support for LPC4357USB boards
2013-09-10 09:09:22 +02:00
hathach
2d021e0728
added support for RETARGET SWO
2013-09-10 13:36:19 +07:00
hathach
e823862ed1
clean up
2013-09-10 13:15:21 +07:00
hathach
b0b56a417e
added LPC4357_USB board
2013-09-10 12:30:41 +07:00
hathach
6916515612
complete porting to keil
...
- updated cgu
- require microlib for printf retarget
- cannot use fp enable option in keil (may require cmsis update)
2013-09-10 12:22:57 +07:00
hathach
9ed3e80582
keil project can mount mouse, but cannot mount rndis
2013-09-10 11:47:05 +07:00
hathach
14a8e26697
able to get blinky + greeting
2013-09-10 10:43:24 +07:00
hathach
7404894d6d
rename startup
2013-09-10 10:26:15 +07:00
hathach
23cb79372d
able to print hello world
2013-09-10 10:24:24 +07:00
hathach
1646fb2887
Merge branch 'master' of github.com:microbuilder/tinyusb
...
Conflicts:
demos/bsp/boards/microbuilder/board_lpc4357usb.c
demos/bsp/boards/microbuilder/board_lpc4357usb.h
2013-09-08 00:09:33 +07:00
hathach
25a22e169b
try to add lpc4357usb board
2013-09-08 00:01:20 +07:00
Kevin Townsend
1231fae04c
Added trace pin config
2013-07-31 23:30:17 +02:00
Kevin Townsend
781f8354ea
Added LPC4357USB board
2013-07-31 22:03:48 +02:00
hathach
d3e83bc802
print out mac address
2013-07-19 12:08:04 +07:00
hathach
23f4d7356f
change printf retarget to make \n to \r\n automatically
2013-07-19 12:05:25 +07:00
hathach
6fbb906d1e
add rndis_app files
2013-07-07 00:09:03 +07:00
hathach
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
hathach
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
hathach
9d50b0fa6a
update docs
2013-07-04 16:08:33 +07:00
hathach
97cbb39f6f
port osal_mutex to freeRTOS, able to mount mouse & cdc device
...
tinyusb host stack overflow though
2013-07-04 13:24:54 +07:00
hathach
8c0bc38713
house keeping
2013-07-04 10:54:51 +07:00
hathach
d3aed01874
add some printf when a class is mounted
...
add initial tests for rndis
2013-07-04 10:47:31 +07:00
hathach
c5afb9d50f
change class (hid/cdc) _mounted_isr to _mounted_cb
2013-07-04 09:45:20 +07:00
hathach
544b48183a
opt out hardfault handler in board.c which causes problem in compiling with asm inline
2013-07-03 13:48:11 +07:00
hathach
4a8686e868
adding _mounted_isr & _umounted_isr callback for host keyboard & mouse
...
remove TUSB_EVENT_INTERFACE_OPEN & TUSB_EVENT_INTERFACE_CLOSE
2013-07-03 12:46:12 +07:00
hathach
b0f45b3651
temporarily check cdc mounted by pipe_in & pipe_out
...
add tests for tusbh_cdc_xfer_isr
2013-07-03 12:06:07 +07:00
hathach
294ddd0acc
complete CDC serial demo (in a quick hacking way)
2013-07-03 11:39:09 +07:00
hathach
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00
hathach
b3f98bc15a
rename cdc descriptor type
...
add tusbh_cdc_mounted_isr & tusbh_cdc_unmounted_isr
2013-07-03 10:53:16 +07:00
hathach
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
hathach
6ce90e2bd8
add tusbh_cdc_send, t usbh_cdc_receive
...
add cdc_serial_app for virtual com demo
2013-07-02 16:41:13 +07:00
hathach
e94ce81b04
fix compilation error
2013-07-01 10:43:55 +07:00
hathach
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
hathach
a943cce991
test refractor
2013-06-29 21:00:33 +07:00
hathach
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
hathach
ea2e63a332
remove app_os_prio.h in os_none configure
...
remove instance_num in hidh API
temporarily pause device stack developement
should fix travis-ci build error
2013-06-26 18:00:05 +07:00
hathach
c7f7bc9808
increase sequence each 64 byte packet
2013-06-23 14:26:56 +07:00
hathach
a531d27a49
should fix problem with demo bulk out
2013-06-23 14:21:44 +07:00
hathach
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
hathach
34b4332ff4
remove redundant project files
2013-06-21 22:17:49 +07:00
hathach
4239da1188
add cmsis for lpc11u
...
remove app_os_prio.h in host_os_none demo
2013-06-21 21:03:23 +07:00
hathach
4f8faebbab
add files for bulk custom test
2013-06-21 20:57:20 +07:00
hathach
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
hathach
4103cc374f
add coreid to hidd_init
...
temporarily implement hidd_init using dcd from lpc17xx
add more test for dcd lp176x
implement dcd_endpoint_configure
2013-06-12 21:06:43 +07:00
hathach
ee57a6f13f
clean up
2013-06-12 14:06:41 +07:00
hathach
503d279af5
ADDING LPC176X device
...
implementing dcd_lpc175x_6x.c
add usbd_dcd.h
add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event
parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0)
--> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor).
uncomment write zero length will cause issue, no more interrupt ?
2013-06-08 02:50:10 +07:00
hathach
3394b4beaa
re-create ngx4330.h
...
remove some rom driver dependency on upper layer
introduce CAP_DEVICE_ROMDRIVER to overwrite TUSB_CFG_DEVICE_USE_ROM_DRIVER within the lib
add support for lpc175x_6x
- able to build and blink led on lpcxpresso1769 with device (without any class enabled)
2013-06-04 13:36:18 +07:00
hathach
7f8752b38b
add LPC175x_6x cmiss (got from xpresso example)
...
add LPC175x_6x driver lib (got from http://git.lpcware.com//lpc175x_6x.git
2013-06-04 11:45:01 +07:00
hathach
cdc830782f
rename tusb_device_is_configured
...
remove dcd_lpc18xx_lpc43xx.h and dcd_lpc11uxx_lpc13xx move define to hal
2013-06-04 10:43:58 +07:00
hathach
f982a10b6b
house keeping
2013-06-03 16:04:03 +07:00
hathach
9f9adca03b
add TUSB_CFG_PROUDCT_ID check
...
move USB_MAX_EP_NUM to device dependency
- lpc43 --> 6
- lpc11/13 --> 5
2013-06-03 15:56:14 +07:00
hathach
52f18f3784
refractor device mouse main.c & tusbd_hid_mouse_send_report
2013-06-03 14:37:41 +07:00
hathach
b527e6ec4a
refractor tusb_descriptors
...
usbd device_class_driver
added & tested HID mouse for device (work together with hid keyboard)
rename DEVICE_ROM_REG_BASE, DEVICE_ROM_DRIVER_ADDR
2013-06-03 14:31:17 +07:00
hathach
9e49056721
refractor change tusbd_hid_keyboard_send_report API
2013-05-31 21:24:40 +07:00
hathach
03d85acfc7
refractor string descriptors, allow one-stop configure descriptor for
...
- manufacturer, product etc ... (only english now)
2013-05-31 18:21:31 +07:00
hathach
abf1054745
refractor & beautify string descriptors
2013-05-31 16:37:40 +07:00
hathach
376482558a
clean up device main.c demo code
2013-05-31 14:53:26 +07:00
hathach
ed64401e61
rename descriptor variables
2013-05-31 14:42:38 +07:00
hathach
3b9a616ca9
change at86rf to 1ghznode
...
rom device runs ok with lpc11uxx
2013-05-31 13:57:57 +07:00
hathach
04a641f067
ea4357 can be enumerated, but get setconfiugre value of 0
2013-05-29 16:56:15 +07:00
hathach
d5836751d9
keyboard example works with lpc1347 xpresso
2013-05-29 15:23:07 +07:00
hathach
dda0808ebb
fix lpcxpresso1347 board_leds
...
temp change USBD_API to ROM_API
add lpc13xx device support
fix romdriver pointer
able to init rom driver
2013-05-29 14:39:14 +07:00
hathach
1e5bd82af2
rename NGX to ngx
...
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx)
add dcd_nxp_romdriver for handling usb rom driver
add BIT_TEST_ in binary.h
remove mw_usbd_hid.h include due to lexical conflict
2013-05-28 15:24:27 +07:00
hathach
7ae986de95
move board files
2013-05-27 11:57:16 +07:00
hathach
ed217948b8
rename descriptor type, hid descriptor type
2013-05-25 17:19:18 +07:00
hathach
ae02263d81
add stub function to able to build device with EA4357
...
- dcd_controller_reset
- dcd_controller_connect
2013-05-25 16:03:40 +07:00
hathach
9b7f24bef2
add files for hitex4350 but fail to get it power on USB0 host connector
2013-05-23 17:19:28 +07:00
hathach
c4e6eec4ac
LED init for mcb4300
2013-05-23 15:14:57 +07:00
hathach
132c3996ea
move scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2) to hal/hal_lpc43xx.c
...
dual host run without problem with mcb4300
2013-05-23 14:56:11 +07:00
hathach
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
hathach
d7ae21203c
fix issue with osal_none queue def
2013-05-21 17:57:21 +07:00
hathach
f4887b3981
adding support for keil's rtx cmsis-rtos
2013-05-15 13:39:28 +07:00
hathach
40503b913b
abstract os priority for application tasks
2013-05-14 21:32:13 +07:00
hathach
f8d1c3da3e
rename tusbh_hid_keyboard/mouse_is_supported to tusbh_hid_keyboard/mouse_is_mounted
2013-05-14 03:03:54 +07:00
hathach
834869ffcd
filter out unused driver files in CMSIS lpc43xxx
2013-05-13 01:21:57 +07:00
hathach
446038fd36
move cmsis to bsp/lpc43xx to keep all in repos for travis-ci run
...
update setting for all project file respectively
2013-05-09 15:23:04 +07:00