kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

try to add lpc4357usb board

This commit is contained in:
hathach 2013-09-08 00:01:20 +07:00
parent d3e83bc802
commit 25a22e169b
5 changed files with 1302 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
demos/bsp/boards/board.h
View File

@ -73,6 +73,8 @@
#define BOARD_HITEX4350 6
#define BOARD_LPCXPRESSO1769 7
#define BOARD_LPC4357USB 8
//--------------------------------------------------------------------+
// PRINTF TARGET DEFINE
//--------------------------------------------------------------------+
@ -99,6 +101,8 @@
#include "hitex/board_hitex4350.h"
#elif BOARD == BOARD_LPCXPRESSO1769
#include "lpcxpresso/board_lpcxpresso1769.h"
#elif BOARD == BOARD_LPC4357USB
#include "microbuilder/board_lpc4357usb.h"
#else
#error BOARD is not defined or supported yet
#endif

6
demos/bsp/boards/embedded_artists/board_ea4357.c
View File

@ -42,9 +42,9 @@
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
void board_init(void)
{

123
demos/bsp/boards/microbuilder/board_lpc4357usb.c Normal file
View File

@ -0,0 +1,123 @@
/**************************************************************************/
/*!
@file board_lpc4357usb.c
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "../board.h"
#if BOARD == BOARD_LPC4357USB
#define BOARD_MAX_LEDS 1
const static struct {
uint8_t port;
uint8_t pin;
}leds[BOARD_MAX_LEDS] = { {6, 1} };
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
void board_init(void)
{
SystemInit();
CGU_Init();
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
//------------- USB Bus power HOST ONLY-------------//
// scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
//
// scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
// GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
// GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
//------------- Led Init -------------//
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC4);
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
#if CFG_UART_ENABLE
//------------- UART init -------------//
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
UART_CFG_Type UARTConfigStruct;
UART_ConfigStructInit(&UARTConfigStruct);
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
}
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
if ( on_mask & BIT_(i))
{
GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
}else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
{
GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
}
}
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
}
uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
{
return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
}
#endif
#endif

67
demos/bsp/boards/microbuilder/board_lpc4357usb.h Normal file
View File

@ -0,0 +1,67 @@
/**************************************************************************/
/*!
@file board_lpc4357usb.h
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_LPC4357USB_H_
#define _TUSB_BOARD_LPC4357USB_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC43xx.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"
#include "lpc43xx_gpio.h"
#include "lpc43xx_uart.h"
#define CFG_PRINTF_TARGET PRINTF_TARGET_DEBUG_CONSOLE // PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_LPC4357USB_H_ */
/** @} */

1105
demos/host/host_os_none/.cproject
View File

File diff suppressed because it is too large Load Diff