3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
a98bae0d19
enhance serial host app
2013-10-27 20:56:41 +07:00
1d28b2bd10
refractor cdc serial host app.
...
fix RTOS cdc_serial_app_task executing forever
2013-10-27 20:44:06 +07:00
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
86b3e3174d
refine mouse demo
2013-10-16 12:05:48 +07:00
f28d2d1189
add supported class to greeting
2013-10-15 12:39:11 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
ef83b8e10a
wrap up msc demo
2013-10-01 17:05:02 +07:00
fffd613897
enhance cd command
2013-10-01 16:36:52 +07:00
18b3179bc6
refractor msc host app examples
2013-10-01 16:11:34 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
26f75d6cac
house keeping
2013-09-26 15:35:15 +07:00
238afb474f
house keeping
2013-09-26 15:15:16 +07:00
a6726f7d39
added mkdir command
2013-09-26 15:08:49 +07:00
0268e0b787
added clear screen command
2013-09-26 15:04:02 +07:00
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
4bdede53eb
refractor cli error handling
...
add cat command
2013-09-26 11:27:48 +07:00
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
b995e25308
enable long filename
2013-09-25 20:44:18 +07:00
89898acd5d
almost complete cli for msc
2013-09-25 19:52:05 +07:00
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
cf65f859be
working on fatfs integration
...
fix retarget input for lpcxpresso
2013-09-25 11:23:53 +07:00
bd9af2d57b
added cli support
2013-09-24 21:04:56 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
2db5fcdf0a
update keil project for freertos & cmsis
2013-09-21 01:05:54 +07:00
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
d8907c9a2b
IAR host none project working
2013-09-19 18:18:05 +07:00
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
9d87a1c62b
temporarily comment out all the lwip related code
2013-09-18 21:08:48 +07:00
1cd2d5cf36
able to build with newly added lwip folder
2013-09-16 16:38:46 +07:00
0c97131149
start to add lwip support
2013-09-14 15:24:59 +07:00
765ce19be1
update cmsis rtx keil project for LPC4357USB
2013-09-13 23:37:09 +07:00
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
ad0ef2e266
all project can run ok
2013-09-13 22:30:11 +07:00
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
1f573eecf2
added keil project for host_freertos
2013-09-12 15:55:54 +07:00
968c218f33
Merge branch 'master' of github.com:microbuilder/tinyusb
...
Conflicts:
demos/host/host_os_none/host_os_none.uvopt
2013-09-12 14:44:02 +07:00
ad5ce98c02
finshed upgrading lpc43xx cmsis
2013-09-12 14:42:08 +07:00
8a8537d7e5
updating lib *.c
2013-09-12 14:27:22 +07:00
239864c6cf
update history & freertos project
2013-09-12 14:20:22 +07:00
0769643814
update header files
2013-09-12 14:06:59 +07:00
dc6f6e3b3e
rename lpc43 cmsis folder, preparing to upgrade cmsis from v2.10 to 3.01
2013-09-12 13:58:33 +07:00
09dd83c05b
add set msg & get set cmplt for OID_GEN_CURRENT_PACKET_FILTER (default = 0 reject all) to
...
○ NDIS_PACKET_TYPE_DIRECTED
○ NDIS_PACKET_TYPE_MULTICAST
○ NDIS_PACKET_TYPE_BROADCAST
2013-09-11 15:03:37 +07:00
50d0e9bb8d
Apply power to USB
2013-09-10 09:20:59 +02:00
3e54ab7c9e
Added trace support for LPC4357USB boards
2013-09-10 09:09:22 +02:00
2d021e0728
added support for RETARGET SWO
2013-09-10 13:36:19 +07:00
e823862ed1
clean up
2013-09-10 13:15:21 +07:00
b0b56a417e
added LPC4357_USB board
2013-09-10 12:30:41 +07:00
6916515612
complete porting to keil
...
- updated cgu
- require microlib for printf retarget
- cannot use fp enable option in keil (may require cmsis update)
2013-09-10 12:22:57 +07:00
9ed3e80582
keil project can mount mouse, but cannot mount rndis
2013-09-10 11:47:05 +07:00
14a8e26697
able to get blinky + greeting
2013-09-10 10:43:24 +07:00
7404894d6d
rename startup
2013-09-10 10:26:15 +07:00
23cb79372d
able to print hello world
2013-09-10 10:24:24 +07:00
1646fb2887
Merge branch 'master' of github.com:microbuilder/tinyusb
...
Conflicts:
demos/bsp/boards/microbuilder/board_lpc4357usb.c
demos/bsp/boards/microbuilder/board_lpc4357usb.h
2013-09-08 00:09:33 +07:00
25a22e169b
try to add lpc4357usb board
2013-09-08 00:01:20 +07:00
1231fae04c
Added trace pin config
2013-07-31 23:30:17 +02:00
781f8354ea
Added LPC4357USB board
2013-07-31 22:03:48 +02:00
d3e83bc802
print out mac address
2013-07-19 12:08:04 +07:00
23f4d7356f
change printf retarget to make \n to \r\n automatically
2013-07-19 12:05:25 +07:00
6fbb906d1e
add rndis_app files
2013-07-07 00:09:03 +07:00
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
9d50b0fa6a
update docs
2013-07-04 16:08:33 +07:00
97cbb39f6f
port osal_mutex to freeRTOS, able to mount mouse & cdc device
...
tinyusb host stack overflow though
2013-07-04 13:24:54 +07:00
8c0bc38713
house keeping
2013-07-04 10:54:51 +07:00
d3aed01874
add some printf when a class is mounted
...
add initial tests for rndis
2013-07-04 10:47:31 +07:00
c5afb9d50f
change class (hid/cdc) _mounted_isr to _mounted_cb
2013-07-04 09:45:20 +07:00
544b48183a
opt out hardfault handler in board.c which causes problem in compiling with asm inline
2013-07-03 13:48:11 +07:00
4a8686e868
adding _mounted_isr & _umounted_isr callback for host keyboard & mouse
...
remove TUSB_EVENT_INTERFACE_OPEN & TUSB_EVENT_INTERFACE_CLOSE
2013-07-03 12:46:12 +07:00
b0f45b3651
temporarily check cdc mounted by pipe_in & pipe_out
...
add tests for tusbh_cdc_xfer_isr
2013-07-03 12:06:07 +07:00
294ddd0acc
complete CDC serial demo (in a quick hacking way)
2013-07-03 11:39:09 +07:00
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00
b3f98bc15a
rename cdc descriptor type
...
add tusbh_cdc_mounted_isr & tusbh_cdc_unmounted_isr
2013-07-03 10:53:16 +07:00
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
6ce90e2bd8
add tusbh_cdc_send, t usbh_cdc_receive
...
add cdc_serial_app for virtual com demo
2013-07-02 16:41:13 +07:00
e94ce81b04
fix compilation error
2013-07-01 10:43:55 +07:00
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
a943cce991
test refractor
2013-06-29 21:00:33 +07:00
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
ea2e63a332
remove app_os_prio.h in os_none configure
...
remove instance_num in hidh API
temporarily pause device stack developement
should fix travis-ci build error
2013-06-26 18:00:05 +07:00
c7f7bc9808
increase sequence each 64 byte packet
2013-06-23 14:26:56 +07:00
a531d27a49
should fix problem with demo bulk out
2013-06-23 14:21:44 +07:00
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
34b4332ff4
remove redundant project files
2013-06-21 22:17:49 +07:00
4239da1188
add cmsis for lpc11u
...
remove app_os_prio.h in host_os_none demo
2013-06-21 21:03:23 +07:00
4f8faebbab
add files for bulk custom test
2013-06-21 20:57:20 +07:00
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
4103cc374f
add coreid to hidd_init
...
temporarily implement hidd_init using dcd from lpc17xx
add more test for dcd lp176x
implement dcd_endpoint_configure
2013-06-12 21:06:43 +07:00
ee57a6f13f
clean up
2013-06-12 14:06:41 +07:00
503d279af5
ADDING LPC176X device
...
implementing dcd_lpc175x_6x.c
add usbd_dcd.h
add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event
parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0)
--> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor).
uncomment write zero length will cause issue, no more interrupt ?
2013-06-08 02:50:10 +07:00
3394b4beaa
re-create ngx4330.h
...
remove some rom driver dependency on upper layer
introduce CAP_DEVICE_ROMDRIVER to overwrite TUSB_CFG_DEVICE_USE_ROM_DRIVER within the lib
add support for lpc175x_6x
- able to build and blink led on lpcxpresso1769 with device (without any class enabled)
2013-06-04 13:36:18 +07:00
7f8752b38b
add LPC175x_6x cmiss (got from xpresso example)
...
add LPC175x_6x driver lib (got from http://git.lpcware.com//lpc175x_6x.git
2013-06-04 11:45:01 +07:00
cdc830782f
rename tusb_device_is_configured
...
remove dcd_lpc18xx_lpc43xx.h and dcd_lpc11uxx_lpc13xx move define to hal
2013-06-04 10:43:58 +07:00
f982a10b6b
house keeping
2013-06-03 16:04:03 +07:00
9f9adca03b
add TUSB_CFG_PROUDCT_ID check
...
move USB_MAX_EP_NUM to device dependency
- lpc43 --> 6
- lpc11/13 --> 5
2013-06-03 15:56:14 +07:00
52f18f3784
refractor device mouse main.c & tusbd_hid_mouse_send_report
2013-06-03 14:37:41 +07:00
b527e6ec4a
refractor tusb_descriptors
...
usbd device_class_driver
added & tested HID mouse for device (work together with hid keyboard)
rename DEVICE_ROM_REG_BASE, DEVICE_ROM_DRIVER_ADDR
2013-06-03 14:31:17 +07:00
9e49056721
refractor change tusbd_hid_keyboard_send_report API
2013-05-31 21:24:40 +07:00
03d85acfc7
refractor string descriptors, allow one-stop configure descriptor for
...
- manufacturer, product etc ... (only english now)
2013-05-31 18:21:31 +07:00
abf1054745
refractor & beautify string descriptors
2013-05-31 16:37:40 +07:00
376482558a
clean up device main.c demo code
2013-05-31 14:53:26 +07:00
ed64401e61
rename descriptor variables
2013-05-31 14:42:38 +07:00
3b9a616ca9
change at86rf to 1ghznode
...
rom device runs ok with lpc11uxx
2013-05-31 13:57:57 +07:00
04a641f067
ea4357 can be enumerated, but get setconfiugre value of 0
2013-05-29 16:56:15 +07:00
d5836751d9
keyboard example works with lpc1347 xpresso
2013-05-29 15:23:07 +07:00
dda0808ebb
fix lpcxpresso1347 board_leds
...
temp change USBD_API to ROM_API
add lpc13xx device support
fix romdriver pointer
able to init rom driver
2013-05-29 14:39:14 +07:00
1e5bd82af2
rename NGX to ngx
...
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx)
add dcd_nxp_romdriver for handling usb rom driver
add BIT_TEST_ in binary.h
remove mw_usbd_hid.h include due to lexical conflict
2013-05-28 15:24:27 +07:00
7ae986de95
move board files
2013-05-27 11:57:16 +07:00
ed217948b8
rename descriptor type, hid descriptor type
2013-05-25 17:19:18 +07:00
ae02263d81
add stub function to able to build device with EA4357
...
- dcd_controller_reset
- dcd_controller_connect
2013-05-25 16:03:40 +07:00
9b7f24bef2
add files for hitex4350 but fail to get it power on USB0 host connector
2013-05-23 17:19:28 +07:00
c4e6eec4ac
LED init for mcb4300
2013-05-23 15:14:57 +07:00
132c3996ea
move scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2) to hal/hal_lpc43xx.c
...
dual host run without problem with mcb4300
2013-05-23 14:56:11 +07:00
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
d7ae21203c
fix issue with osal_none queue def
2013-05-21 17:57:21 +07:00
f4887b3981
adding support for keil's rtx cmsis-rtos
2013-05-15 13:39:28 +07:00
40503b913b
abstract os priority for application tasks
2013-05-14 21:32:13 +07:00
f8d1c3da3e
rename tusbh_hid_keyboard/mouse_is_supported to tusbh_hid_keyboard/mouse_is_mounted
2013-05-14 03:03:54 +07:00
834869ffcd
filter out unused driver files in CMSIS lpc43xxx
2013-05-13 01:21:57 +07:00
446038fd36
move cmsis to bsp/lpc43xx to keep all in repos for travis-ci run
...
update setting for all project file respectively
2013-05-09 15:23:04 +07:00
fd49cff8e8
add stub for msc host & hub driver
2013-05-06 20:09:06 +07:00
4fa7f77ee2
adding keil mcb4300 support
...
- implement board_leds & board_uart routines
2013-05-06 15:06:08 +07:00
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
c202bfe556
move ngx4330 to ngx folder in boards
2013-04-29 20:43:16 +07:00
c2b453c8a0
make NGX4330 build runs ok with host_freertos demo
2013-04-29 17:47:48 +07:00
fdd98e2fa9
clean up main
2013-04-28 00:00:48 +07:00
d68f882a25
refractor mouse & keyboard app
2013-04-27 16:50:58 +07:00
38172d3d3c
fix bug with osal_queue for freeRTOS
...
implement process mouser report to clarify mouse app task
2013-04-27 16:40:18 +07:00
8bd077fa5c
fix bug (wrong logic) with osal_task_delay in non OS configure
...
complete keyboard app with key state & event TODO handle & check for non-printable(control) keycode
add unit test for osal_task_delay for non OS
2013-04-27 00:24:15 +07:00
33feba5cbc
add hid_keycode_to_ascii_tbl for hid class
...
improve keyboard_app, should display all displayable characters
improve the de-bouncing keyboard (still got some issues)
2013-04-26 02:08:22 +07:00
3763e22c9a
change OSAL_TASK_DEF to decouple variable name with task name
...
implement osal_task_delay for freeRTOS & non_os
getting both no_os & freertos running with mouse + keyboard
2013-04-25 16:41:00 +07:00
1ae5484320
finally able to get freeRTOS run with current mouse + keyboard example
...
NOTES: print_greeting if is executed before the start of freeRTOS scheduler --> hardfault
- print_greeting->vsprintf->systick -> bunch of ISR --> hardfault.
printf using serial after the start of scheduler is ok though
2013-04-25 15:43:33 +07:00
92994c8192
add attribute warn unused result for osal_create_* function
...
taskify keyboard_app mouse_app & led_blinking
2013-04-25 11:55:24 +07:00
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
d4a2600ecc
- change OSAL_TASK_FUNCTION to have void* parameter (to be consistent with most popular RTOS)
...
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
2013-04-24 17:53:43 +07:00
73d5f00a40
rename OSAL_TASK_DECLARE to OSAL_TASK_FUNCTION
...
removing TASK_ASSERT to avoid using goto/continue statement with rtos configure
2013-04-23 15:35:27 +07:00
0b9f553f81
house keeping
2013-04-22 12:46:36 +07:00
8cc4c6f52d
change the board_leds API to on_mask, off_mask
...
getting led toggling per second on host demo
add greeting message
2013-04-22 12:10:52 +07:00
799c709524
adding oem base board lib for ea4357
2013-04-22 11:22:56 +07:00
ea1b5ec355
house cleaning
2013-04-22 11:16:12 +07:00
0d55f7d290
moving things around
2013-04-22 11:03:18 +07:00
c20071c55c
fix compiler error for USB1 to none in ehci.c
...
rename and moving bsp ea4357
2013-04-22 11:00:43 +07:00
3f9a73a34d
change config to use USB0 only
...
fix some compiler warnings
2013-04-22 10:44:51 +07:00
a493fab753
separate fake ehci's run async & period list
...
refractor list_find_previous_item & list_remove_qhd to act on ehci_link_t* instead of ehci_qhd_t*
fully support 1ms, 2ms, 4ms, 8ms for period list (each list has a dummy queue head)
- change period list structure
limit the maximum polling interval to 256 ms
add max_loop static MAX number of iteration for list_find_previous_item
add test for close 256ms polling interrupt
2013-04-21 15:09:54 +07:00
357888a5e5
rename nxp_sof_received to nxp_int_sof
...
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
2013-04-21 00:28:25 +07:00
a9010c1786
getting build with freertos & host demo
2013-04-16 16:48:19 +08:00
cb4981dd2d
adding host_freertos configure & build etc
2013-04-16 16:30:36 +08:00
115c1f2552
create lpcxpresso project for host_freertos
2013-04-16 15:04:46 +08:00
528cadf3ff
rename and "host" to "host_os_none" demo in prepare for creating host_freertos demo
2013-04-16 14:49:20 +08:00
91d64ebbb3
clear keyboard & mouse report
2013-04-15 18:04:26 +08:00
1821681816
move project files to os_none
2013-04-15 17:49:02 +08:00
54221bb73b
move code in host demo to /src in prepare for support freeRTOS projects
2013-04-15 17:30:36 +08:00
2d7fbb5153
change keyboard_app.c & mouse_app.c from polling API to interrupt-based (callback isr)
...
and using OSAL for task-base demo
- fix ehci error with XFER_COMPLETE callback to usbh_isr, TD need to be freed & unlink before invoking
callback
- fix bug in usbh.c set device state to CONFIGURED right after SET_CONFIGURE control xfer
2013-04-10 02:34:40 +07:00
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data)
...
- support any size queue message (instead of fixed uint32_t)
2013-04-10 01:18:32 +07:00
11dff6f978
add Lib_OemBaseBoard to bsp/board but current exclude from all builds (added when needed later)
2013-04-09 02:30:33 +07:00
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1)
...
add back port reset after get 8 bytes of device descriptor
2013-04-09 02:13:18 +07:00
b0a54cbf8f
amend last commit
2013-04-08 15:01:04 +07:00
94e25880dc
- add scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence
...
- USB1 host run ok with NGX4330
2013-04-08 14:57:00 +07:00
ef850984da
move MCU define to tusb_option.h, fix the ATTR with USB RAM
...
hack: add delay before the very first xfer when enumerating (finalize later
after reading USB 2.0 specs)
2013-04-08 03:45:31 +07:00
95df92055c
fix board uart init with NGX4330 (use UART0)
...
add USB1_PWR_EN (GPIO5[6])
2013-04-08 02:36:43 +07:00
4b63a2bc5c
- fix HID_MOUSEBUTTON right & left
...
- add mouse app to mount mouse interface
2013-04-07 19:33:40 +07:00
1776bb53f6
add hal init for USB1 and trying to get USB1 working
...
add hack delay 100 ms after a port reset (huge) for correct speed detection
2013-04-07 03:40:24 +07:00
e658e67ebe
fix the damn bug within 10 line of code in keyboard_app.c
2013-03-29 00:20:27 +07:00
d95c6cf2e0
quick fix for a bug in keyboard app.
...
still have unplug/plug event after receiving report from keyboard devices
2013-03-27 15:42:45 +07:00
7b5d9edc5a
add test for pipe_interrupt_xfer
...
implement keyboard app code
- forcefully place keyboard_report in RAM section 3
change used bit in qtd from reserved in buffer[1] to alternate link
add code for fake ehci controller runs on period interrupt
change signature of tusbh_hid_keyboard_get_report
- tusb_keyboard_report_t* to uint8_t*
implement period (interrupt) complete isr processing
2013-03-27 11:51:44 +07:00
03d045ecde
- put ATTR_UNUSED to hardfault handler variables to discard compiler warning
...
- change host_class_driver_t: open_subtask signature to accept tusb_descriptor_interface_t const * instead of uint8_t*
2013-03-26 12:14:04 +07:00
c026a9f2e0
remove obsolete TUSB_CFG_HOST_HID_KEYBOARD_ENDPOINT_SIZE
...
temporarily ignore test for hid_host.c due to ceedling linking issue with weak symbol
implement hidh_open_subtask driver to subclass open
rename hidh_keyboard_install to hidh_keyboard_open_subtask
2013-03-25 16:02:24 +07:00
56cd8be75e
change website from tinyusb.net to tinyusb.org
2013-03-25 11:46:30 +07:00
c7c993d6cc
refractor hidh keyboard
...
changing class hidh behavior
2013-03-24 21:40:49 +07:00
a1b17be681
add class flags
...
change keyboard_info_pool to keyboard_data
2013-03-24 17:29:07 +07:00
ce63980386
clean up:
...
- refractor tusb_handle_device_t device_hdl to uint8_t dev_addr
add keyboard_app.c/h
2013-03-24 15:50:49 +07:00
9c5ffa9932
house keeping
2013-03-24 14:32:54 +07:00
ae9b9ead7a
continue clean up ehci
2013-03-23 10:23:37 +07:00
dbaf6c0d30
- fix bug when unplugged unmounted-already device (mostly plugged when power on)
...
- add hal_debugger_is_attached & hal_debugger_breakpoint
- assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed
- fix get control qhd function when dev_addr is not zero (shifted 1)
- fix wrong logic for unsupported class
2013-03-22 17:08:51 +07:00
97c9001d40
add hard fault handler to bsp.c
...
rename class_install_subtask to class_open_subtask
add class_close for unmount
adding code for usbh_device_unplugged_isr & invoke it in hcd_isr
2013-03-13 10:57:30 +07:00
79e277d323
go through all the enumeration (up to get full configuration)
...
- fix init_qhd for address 0 (clear queue head --> ehci controller halted)
- fix bug in usbh_init missing address0 for semaphore create
TUSB_CFG_DEBUG == 3: --> ATTR_ALWAYS_INLINE is null --> allow gcc to export "normal inline" function
2013-03-13 00:02:45 +07:00
d2bd80109e
add semaphore post in usbh_isr for control pipe
...
add osal_queue_send in usbh_device_plugged
add macro for placing breakpoint macros
fix ehci init:
- regs->cmd or (add run_stop)
- enable port power in portsc
add tusb_task_runner in main loop
2013-03-12 20:04:29 +07:00
c6b220c327
update keil file
2013-03-12 15:08:35 +07:00
453ea39865
add project file for keil
...
fix binary.h compiler specific
add hal_init code to reset & set usbmode --> able to get USB ISR
remove const qualifier from return function of
- get_operational_register
- get_period_frame_list
- get_async_head
- get_period_head
- get_control_qhd
add stub for
- hcd_port_connect_status
- hcd_port_speed
2013-03-12 12:06:40 +07:00
a259be6edf
refractor
...
- remove TUSB_CFG_HOST_CONTROLLER_START_INDEX
2013-03-04 18:01:05 +07:00
e1033b9b3c
replace TUSB_CFG_HOST by MODE_HOST_SUPPORTED
...
move stuffs around
2013-03-04 17:07:14 +07:00
94c004724c
allow configure host/device by controller basic
...
- make changes to adapt
add mcu_capacity.h
2013-03-04 16:21:41 +07:00
0c397c6b8d
house keeping
...
- correct initialization call sequence
- move hcd_init to ehci.c
2013-02-27 18:49:28 +07:00
49da210860
add osal subtask support
...
add usbh_control_xfer_subtask as xfer and wait
fix potential error when update device info & open control pipe for new address
fix build error with hal_****.c
add STATIC_ASSSERT to perform compile time checking with sizeof later
update osal_queue_receive and osal_semaphore_wait for osal_none to support subtask
2013-02-26 17:28:05 +07:00
489b98cb93
add TUSB_CFG_HOST_CONTROLLER_START_INDEX
...
update usbh_init and test code for TUSB_CFG_HOST_CONTROLLER_START_INDEX
clean up some
2013-02-08 12:12:10 +07:00
aeccdfde3f
remove TUSB prefix for class enum definitions
...
add most of HID USAGE TABLE and definitions etc ...
2013-02-05 13:57:06 +07:00
9a1bda1633
house keeping
2013-01-27 16:19:18 +07:00
535f330026
update license year from 2012 to 2013
2013-01-27 13:50:40 +07:00
7edda37518
add more test code for keyboard hid application API
...
refractor, restructure, rename several thing regarding host, keyboard etc ...
2013-01-26 01:37:15 +07:00
38ce3f7534
start to support
...
- usbd host
- osal
some global define
#define TUSB_CFG_HOST_CONTROLLER_NUM
#define TUSB_CFG_HOST_DEVICE_MAX
#define TUSB_CFG_CONFIGURATION_MAX
rename & refractor HID type structure & enum
use CException to test asssertion library
add test for hid_host_keyboard with usbd configure get & osal queue get stubs
update test for assertion library
refractor ASSERT_STATUS in assertion library
update tusb_error_t values
rename usb basic type & enum in tusb_types.h and std_descriptors.h
2013-01-22 17:41:06 +07:00
cfe7a3d23b
change error type to lower case for more consistency
...
change Error Enum to TUSB prefix for more consistency
start to add check for OS configure
2013-01-19 00:57:58 +07:00
d8c8b9e38a
add ASSERT POINTER support
...
add hid host and separate hid host & device
update host project setting with EA4357 board
add para checking test for hid host
2013-01-18 14:39:42 +07:00
25f6cee73b
add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver add
...
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application
remove power_api.h (mcu dependency)
2013-01-18 11:49:51 +07:00
c16632da0b
add UART support for ea4357 (tested)
2013-01-17 14:40:46 +07:00
480ddb4fec
start to add bsp and build configuration for embedded artist 4357
2013-01-17 11:03:43 +07:00
10009cba99
add initial support for output using ITM via SWO (not tested though)
2013-01-17 02:04:47 +07:00
aae51e985f
refractor board and start to add support for SWO retarget
2013-01-17 01:09:58 +07:00
c004cd4387
add uart for lpc11uxx and retarget successfully
2013-01-16 12:43:17 +07:00
0cec7910a0
update project setting to have most warning option enable with simple switch on/off (off for faster compiling time)
2013-01-15 14:41:19 +07:00
6e0818c901
re-target printf to uart successful on LPCXpresso1347
2013-01-11 22:43:54 +07:00
e935f29541
tested keyboard device with lpcXpresso1347 board
2013-01-11 20:49:46 +07:00
d76df54003
add external configure file: tusb_config.h
...
rename the internal/default configure from tusb_cfg.h to tusb_option.h
2013-01-11 16:55:47 +07:00
a6e5197b58
use X Macros to remove #undef in errors.
2013-01-11 16:28:57 +07:00
83bb44510a
update makefile project
...
back to use lpcxpresso project file (instead of make target project)
2013-01-11 16:10:16 +07:00
1f3c9ed69d
start add makefile for keyboard demo
2013-01-10 16:46:52 +07:00
f4fa62e032
clean up
2012-12-27 02:33:51 +07:00
a2e1fc4a73
fix device example build errors
2012-12-20 17:13:22 +07:00
8c2ec83c59
rename macro configure in examples
2012-12-20 16:59:43 +07:00
ec4a3f6048
cleaning
2012-12-18 15:08:30 +07:00
e4a69a6f71
running blinking example
2012-12-10 16:10:24 +07:00
4ec23ea786
add build and project settings for lpc43xx
2012-12-10 15:59:10 +07:00
3eb7465e5e
abstract usb enable/disable interrupt to hal layer
2012-12-10 14:58:25 +07:00
b52b3b1cef
finalize building process. Now I can focus on developing the stack (finally)
2012-12-07 18:09:01 +07:00
70e3a13951
change building process yes, again
2012-12-07 17:59:46 +07:00
cd74f4f0ed
work with lpc11u37 (lpc11uxx) on kevin's board
2012-12-07 16:22:47 +07:00
cc45f35d70
fix descriptors for device
2012-12-07 10:53:52 +07:00
6049b6d0df
make fundamental changes in project building
...
add some makefile.defs
2012-12-07 01:31:09 +07:00
f31ade6151
add board abstract layer
...
rename arch to mcu
2012-12-04 18:18:29 +07:00
8f00307986
fixed building errors with device example
2012-12-04 11:30:34 +07:00
6ea85a569a
added IAD descriptor
2012-12-03 18:43:35 +07:00
hathach