kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

refractor board and start to add support for SWO retarget

This commit is contained in:
hathach 2013-01-17 01:09:58 +07:00
parent 53739ccd28
commit aae51e985f
8 changed files with 192 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
demos/bsp/boards/board.h
View File

@ -57,31 +57,38 @@
#include <stdint.h>
#define BSP_TICKS_PER_SECOND 1000
#define BSP_UART_ENABLE 1
#define BSP_UART_BAUDRATE 115200
#define BOARD_AT86RF2XX 0
#define BOARD_LPCXPRESSO1347 1
#define BOARD_NGX4330 2
/// n-th Bit
#ifndef BIT_
#define BIT_(n) (1 << (n))
#endif
#define BOARD_AT86RF2XX 0
#define BOARD_LPCXPRESSO1347 1
#define BOARD_NGX4330 2
#define PRINTF_TARGET_DEBUG_CONSOLE 0 // IDE semihosting console
#define PRINTF_TARGET_UART 1
#define PRINTF_TARGET_SWO 2 // aka SWV, ITM
#if BOARD == BOARD_NGX4330
#include "board_ngx4330.h"
#elif BOARD == BOARD_LPCXPRESSO1347
#include "board_lpcxpresso1347.h"
#elif BOARD == BOARD_AT86RF2XX
#include "board_at86rf2xx.h"
#else
#error BOARD is not defined or supported yet
#endif
/// Init board peripherals : Clock, UART, LEDs, Buttons
//--------------------------------------------------------------------+
// Common Configuration
//--------------------------------------------------------------------+
#define CFG_TICKS_PER_SECOND 1000
#if CFG_PRINTF_TARGET == PRINTF_TARGET_UART
#define CFG_UART_ENABLE 1
#define CFG_UART_BAUDRATE 115200
#endif
//--------------------------------------------------------------------+
// Board Common API
//--------------------------------------------------------------------+
// Init board peripherals : Clock, UART, LEDs, Buttons
void board_init(void);
void board_leds(uint32_t mask, uint32_t state);
uint32_t board_uart_send(uint8_t *buffer, uint32_t length);

17
demos/bsp/boards/board_at86rf2xx.c
View File

@ -39,26 +39,17 @@
#if BOARD == BOARD_AT86RF2XX
#include "LPC11Uxx.h"
#include "lpc11uxx/gpio.h"
#include "lpc11uxx/uart.h"
#define CFG_LED_PORT (1)
#define CFG_LED_PIN (31)
#define CFG_LED_ON (0)
#define CFG_LED_OFF (1)
void board_init(void)
{
SystemInit();
SysTick_Config(SystemCoreClock / BSP_TICKS_PER_SECOND); // 1 msec tick timer
SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer
GPIOInit();
GPIOSetDir(CFG_LED_PORT, CFG_LED_PIN, 1);
board_leds(0x01, 0); // turn off the led first
#if BSP_UART_ENABLE
UARTInit(BSP_UART_BAUDRATE);
#if CFG_UART_ENABLE
UARTInit(CFG_UART_BAUDRATE);
#endif
}
@ -74,7 +65,7 @@ void board_leds(uint32_t mask, uint32_t state)
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
#if BSP_UART_ENABLE
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
UARTSend(buffer, length);

77
demos/bsp/boards/board_at86rf2xx.h Normal file
View File

@ -0,0 +1,77 @@
/*
* board_at86rf2xx.h
*
* Created on: Jan 17, 2013
* Author: hathach
*/
/*
* Software License Agreement (BSD License)
* Copyright (c) 2012, hathach (tinyusb.net)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the tiny usb stack.
*/
/** \file
* \brief TBD
*
* \note TBD
*/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_AT86RF2XX_H_
#define _TUSB_BOARD_AT86RF2XX_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC11Uxx.h"
#include "lpc11uxx/gpio.h"
#include "lpc11uxx/uart.h"
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#define CFG_LED_PORT (1)
#define CFG_LED_PIN (31)
#define CFG_LED_ON (0)
#define CFG_LED_OFF (1)
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_AT86RF2XX_H_ */
/** @} */

17
demos/bsp/boards/board_lpcxpresso1347.c
View File

@ -39,27 +39,18 @@
#if BOARD == BOARD_LPCXPRESSO1347
#include "LPC13Uxx.h"
#include "lpc13uxx/gpio.h"
#include "lpc13uxx/uart.h"
#define CFG_LED_PORT (0)
#define CFG_LED_PIN (7)
#define CFG_LED_ON (1)
#define CFG_LED_OFF (0)
void board_init(void)
{
SystemInit();
SysTick_Config(SystemCoreClock / BSP_TICKS_PER_SECOND); // 1 msec tick timer
SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer
GPIOInit();
// Leds Init
GPIOSetDir(CFG_LED_PORT, CFG_LED_PIN, 1);
LPC_GPIO->CLR[CFG_LED_PORT] = (1 << CFG_LED_PIN);
#if BSP_UART_ENABLE
UARTInit(BSP_UART_BAUDRATE);
#if CFG_UART_ENABLE
UARTInit(CFG_UART_BAUDRATE);
#endif
}
@ -77,7 +68,7 @@ void board_leds(uint32_t mask, uint32_t state)
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
#if BSP_UART_ENABLE
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
UARTSend(buffer, length);

75
demos/bsp/boards/board_lpcxpresso1347.h Normal file
View File

@ -0,0 +1,75 @@
/*
* board_lpcxpresso1347.h
*
* Created on: Jan 17, 2013
* Author: hathach
*/
/*
* Software License Agreement (BSD License)
* Copyright (c) 2012, hathach (tinyusb.net)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the tiny usb stack.
*/
/** \file
* \brief TBD
*
* \note TBD
*/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_LPCXPRESSO1347_H_
#define _TUSB_BOARD_LPCXPRESSO1347_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC13Uxx.h"
#include "lpc13uxx/gpio.h"
#include "lpc13uxx/uart.h"
#define CFG_LED_PORT (0)
#define CFG_LED_PIN (7)
#define CFG_LED_ON (1)
#define CFG_LED_OFF (0)
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_LPCXPRESSO1347_H_ */
/** @} */

9
demos/bsp/boards/board_ngx4330.c
View File

@ -49,6 +49,11 @@
#include "lpc43xx_i2s.h"
#include "lpc43xx_emc.h"
// TODO abstract later: n-th Bit
#ifndef BIT_
#define BIT_(n) (1 << (n))
#endif
#define BOARD_MAX_LEDS 2
const static struct {
uint8_t port;
@ -58,7 +63,7 @@ const static struct {
void board_init(void)
{
CGU_Init();
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/BSP_TICKS_PER_SECOND ); /* 1 ms Timer */
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
// USB Pin init
/* Turn on 5V USB VBUS TODO Should be Host-only */
@ -83,7 +88,7 @@ void board_init(void)
scu_pinmux(0x6 ,5, MD_PDN|MD_EZI, FUNC2); // UART0_RXD
UART_ConfigStructInit(&UARTConfigStruct); // default: baud = 9600, 8 bit data, 1 stop bit, no parity
UARTConfigStruct.Baud_rate = BSP_UART_BAUDRATE; // Re-configure baudrate
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; // Re-configure baudrate
UART_Init((LPC_USARTn_Type*) LPC_USART0, &UARTConfigStruct); // Initialize UART port
UART_TxCmd((LPC_USARTn_Type*) LPC_USART0, ENABLE); // Enable UART

2
demos/bsp/boards/printf_retarget.c
View File

@ -40,7 +40,7 @@
//-------------------------------------------------------------------- +
// LPCXpresso printf redirection +
//-------------------------------------------------------------------- +
#if BSP_UART_ENABLE
#if CFG_PRINTF_TARGET != PRINTF_TARGET_DEBUG_CONSOLE
// Called by bottom level of printf routine within RedLib C library to write
// a character. With the default semihosting stub, this would write the character
// to the debugger console window . But this version writes

2
demos/device/keyboard/.cproject
View File

@ -27,7 +27,7 @@
<folderInfo id="com.crt.advproject.config.exe.debug.856400198." name="/" resourcePath="">
<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.469819926" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.548956113" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
<builder buildPath="${workspace_loc:/device_keyboard/Debug}" enableAutoBuild="false" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.1029932398" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
<builder buildPath="${workspace_loc:/device_keyboard/Debug}" enableAutoBuild="false" enabledIncrementalBuild="true" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.1029932398" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
<tool id="com.crt.advproject.cpp.exe.debug.1119457813" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.2040685134" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
<option id="com.crt.advproject.gcc.arch.658802474" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>