add files for hitex4350 but fail to get it power on USB0 host connector

demos/bsp/boards/board.h

@@ -68,6 +68,7 @@
 #define BOARD_NGX4330               3
 #define BOARD_EA4357                4
 #define BOARD_MCB4300               5
+#define BOARD_HITEX4350             6
 
 //--------------------------------------------------------------------+
 // PRINTF TARGET DEFINE
@@ -91,6 +92,8 @@
   #include "embedded_artists/board_ea4357.h"
 #elif BOARD == BOARD_MCB4300
   #include "keil/board_mcb4300.h"
+#elif BOARD == BOARD_HITEX4350
+  #include "hitex/board_hitex4350.h"
 #else
   #error BOARD is not defined or supported yet
 #endif

demos/bsp/boards/hitex/board_hitex4350.c

@@ -0,0 +1,110 @@
+/**************************************************************************/
+/*!
+    @file     board_hitex4350.c
+    @author   hathach (tinyusb.org)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+#include "../board.h"
+
+#if BOARD == BOARD_HITEX4350
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF
+//--------------------------------------------------------------------+
+
+//--------------------------------------------------------------------+
+// INTERNAL OBJECT & FUNCTION DECLARATION
+//--------------------------------------------------------------------+
+
+//--------------------------------------------------------------------+
+// IMPLEMENTATION
+//--------------------------------------------------------------------+
+void board_init(void)
+{
+  SystemInit();
+  CGU_Init();
+  SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
+
+  //------------- USB Bus power HOST ONLY-------------//
+  // Hitex VBUS0 is P2_3
+  scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7);     	// USB0_PWR_EN, USB0 VBus function
+  scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1);     		// P6_3 USB0_PWR_EN, USB0 VBus function
+
+  // Hitex VBUS1 is P9_5
+  scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2);				// USB1_PWR_EN, USB1 VBus function
+
+  //------------- LEDs init -------------//
+  // TODO Leds for hitex
+
+  //------------- UART init -------------//
+  #if CFG_UART_ENABLE
+	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN             , FUNC1);
+	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
+
+	UART_CFG_Type UARTConfigStruct;
+  UART_ConfigStructInit(&UARTConfigStruct);
+	UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
+	UARTConfigStruct.Clock_Speed = 0;
+
+	UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
+	UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
+  #endif
+
+}
+
+//--------------------------------------------------------------------+
+// LEDS
+//--------------------------------------------------------------------+
+void board_leds(uint32_t on_mask, uint32_t off_mask)
+{
+  // TODO LED for hitex
+}
+
+//--------------------------------------------------------------------+
+// UART
+//--------------------------------------------------------------------+
+#if CFG_UART_ENABLE
+uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
+{
+  return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
+}
+
+uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
+{
+  return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
+}
+#endif
+
+#endif

demos/bsp/boards/hitex/board_hitex4350.h

@@ -0,0 +1,67 @@
+/**************************************************************************/
+/*!
+    @file     board_hitex4350.h
+    @author   hathach (tinyusb.org)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+/** \ingroup TBD
+ *  \defgroup TBD
+ *  \brief TBD
+ *
+ *  @{
+ */
+
+#ifndef _TUSB_BOARD_HITEX4350_H_
+#define _TUSB_BOARD_HITEX4350_H_
+
+#include "LPC43xx.h"
+#include "lpc43xx_scu.h"
+#include "lpc43xx_cgu.h"
+#include "lpc43xx_gpio.h"
+#include "lpc43xx_uart.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define CFG_PRINTF_TARGET       PRINTF_TARGET_DEBUG_CONSOLE
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_BOARD_HITEX4350_H_ */
+
+/** @} */