4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
03ad1afef9
clean up warnings
2014-01-24 22:04:59 +07:00
a982a52ab3
refractor __n2be_16
2014-01-24 21:51:24 +07:00
275e834bbe
add device_os_none keil project for all boards
2013-12-27 13:40:59 +07:00
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
736cbdc276
using PINSEL_ConfigPin for setting pinsel
2013-12-13 12:41:29 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
51b6c6ff41
implement inline bit manipulation function
2013-12-12 12:21:38 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
b35acbdcb2
add some doxygen
2013-12-10 10:57:59 +07:00
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
dbfad50d43
house keeping
2013-11-20 12:21:29 +07:00
d284ecaccb
add sw int_on_complete support for dcd lpc17xx
2013-11-20 12:03:04 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
d4a260c090
refractor usbd's get descriptor
2013-11-15 15:05:23 +07:00
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
8c9def8618
clean up tusb_descriptors
2013-11-07 11:51:39 +07:00
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
60d444b452
fix a bug with USB1, but still cannot get interrupt occurred on USB1
2013-11-06 14:53:18 +07:00
58b41a05db
refractor for device able to work on usb1 of lpc43xx. But could not get it work on EA4357
2013-11-06 14:20:45 +07:00
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
c760c69d51
clean up
2013-10-30 14:16:45 +07:00
3a37dd66cc
refractor hid device
...
add check dcd_pipe_open if endpoint is already used
refractor usbd : parse and auto open class driver
2013-10-30 14:13:06 +07:00
b8a7ea6d46
add dcd control pipe stall protocol
2013-10-30 12:52:25 +07:00
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
0d9e1163df
fix osal_none timeout, instant return with OSAL_TIMEOUT_NOTIMEOUT
2013-10-27 16:48:09 +07:00
eb39d88360
rndis document
2013-10-27 15:42:31 +07:00
f941f88549
rndis document
2013-10-27 15:15:28 +07:00
76e993c45c
rndis document
2013-10-26 20:25:14 +07:00
df8d56f485
more document
2013-10-26 20:14:12 +07:00
dae4fdc04f
cdc document
2013-10-26 20:12:39 +07:00
acd69a7692
document msc
2013-10-26 19:14:06 +07:00
621cdc7013
doxygen document for msc
2013-10-26 14:12:45 +07:00
d1d2bbdf5d
update doxygen
2013-10-26 12:42:27 +07:00
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
7bf5cbc3fc
move descriptor to common folder
2013-10-25 13:46:38 +07:00
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
6c629a18fc
partially document CDC & RNDIS
2013-10-24 17:26:06 +07:00
b1142ff065
document hub
2013-10-24 17:00:04 +07:00
5f584384eb
document msc host
2013-10-24 16:47:18 +07:00
d8d00ca768
refractor HID document
2013-10-24 15:48:57 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
7f4a3fc829
ignore multiple level of hub
2013-10-01 13:23:31 +07:00
71b2859fe5
handle unplug the hub itself
2013-10-01 13:09:52 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5eebec61f1
refractor hub
2013-09-30 17:14:44 +07:00
0f05d27ac9
refractor hub
2013-09-30 16:59:41 +07:00
9ecaec67b3
refractor hub
2013-09-30 16:40:02 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
09724c5d11
refractor msch
2013-09-26 00:17:45 +07:00
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
e32e901cd1
increase usb transaction time-out as host_cmsis_rtx easily timeouted
2013-09-14 00:00:05 +07:00
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
67453b89f0
fix task def with cmsis rtx
2013-09-13 23:01:43 +07:00
ad0ef2e266
all project can run ok
2013-09-13 22:30:11 +07:00
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
09dd83c05b
add set msg & get set cmplt for OID_GEN_CURRENT_PACKET_FILTER (default = 0 reject all) to
...
○ NDIS_PACKET_TYPE_DIRECTED
○ NDIS_PACKET_TYPE_MULTICAST
○ NDIS_PACKET_TYPE_BROADCAST
2013-09-11 15:03:37 +07:00
hathach