hathach
2d041aaa1d
clean up
2019-09-01 08:11:22 +07:00
hathach
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
hathach
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
hathach
b7dbc98ab1
close #105 add tud_vendor_write_available()
2019-08-31 16:31:07 +07:00
William D. Jones
8b165e1024
stm32h7: Ensure FS (and the only) PHY is selected for OTG_HS2.
2019-08-30 22:07:35 -04:00
William D. Jones
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
William D. Jones
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
hathach
b3acce17cc
adding lpc51u68 support
2019-08-24 00:52:46 +07:00
hathach
48c7b80c57
fix warnings of template descriptor
2019-08-23 13:33:40 +07:00
Scott Shawcroft
00c440cb26
Merge pull request #99 from jepler/issue98-midi-program-change
...
midi_device: Send message classes C and D as 2 bytes
2019-08-15 23:34:42 -07:00
jepler
96d96a94b8
midi_device: Send message classes C and D as 2 bytes
...
.. sending these as two 1-byte messages with CIN of 0xF is
misinterpreted by OSes including Windows 10 and (reportedly)
Mac.
Testing performed: Ran the reproducer script, which sends Program
Change (0xCx) messages. I did not check with Change Pressure (0xDx)
messages, but expect the same thing.
Closes : #98
2019-08-14 19:15:29 -05:00
hathach
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
hathach
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
hathach
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
hathach
30de17a830
clean up
...
- remove TUD_WEBUSB_URL_DESCRIPTOR to avoid flexible array member (C++
forbid in strict mode)
- remove unused TUD_DESC_STRLEN/TUD_DESC_STR_HEADER/TUD_DESC_STR_HEADER
2019-08-01 13:20:00 +07:00
hathach
bd08d0edc9
add vendor peek, change cdc peek signature, change cdc read_char() return from signed char to int32_t
2019-08-01 10:46:27 +07:00
hathach
2c2db31b09
clean up
2019-07-30 20:28:39 +07:00
hathach
00a9e492cd
clean up
2019-07-30 00:48:31 +07:00
hathach
af3c301ea5
added BOS MS OS 2.0 descriptor to webusb example, it work with windows
2019-07-30 00:34:25 +07:00
hathach
cdaf455461
fix stall response with SET_INTERFACE/GET_INTERFACE
...
webusb work with linux & macos
2019-07-26 20:14:56 +07:00
hathach
d2b60b6755
webusb work great with linux
2019-07-26 11:36:30 +07:00
hathach
8ba71be6ee
more webusb + vendor
2019-07-25 16:52:20 +07:00
hathach
caf2b6d463
move tud_vendor_control_* to usbd.h
2019-07-24 23:12:31 +07:00
hathach
2a543c0e79
update vendor device similar to cdc read/write
...
maybe refactor later
2019-07-24 23:07:30 +07:00
hathach
56b656c768
Merge branch 'master' into develop
2019-07-24 17:08:19 +07:00
hathach
1ee9ef4f2b
change tud_msc_start_stop_cb() to return void -> bool
2019-07-24 16:19:12 +07:00
hathach
8ba78ee012
adding vendor
2019-07-24 16:08:43 +07:00
hathach
c63f2b30cb
rename tud_control_vendor_request_cb/complete_cb to tud_vendor_control_request_cb/complete_cb
2019-07-24 09:45:32 +07:00
hathach
8fad8fb5c2
Merge branch 'master' into develop
2019-07-22 19:23:48 +07:00
hathach
33de35504a
more house keeping
2019-07-19 20:20:13 +07:00
hathach
ae5dc435cb
house keeping
2019-07-19 16:49:04 +07:00
hathach
a3cb2dda9e
rename custom/custom-_* to vendor/vendor_*
2019-07-19 16:37:28 +07:00
hathach
6a076d8aae
rename CFG_TUSB_HOST_CUSTOM_CLASS to CFG_TUH_VENDOR
2019-07-19 16:31:51 +07:00
hathach
b0678e1050
rename CFG_TUD_CUSTOM_CLASS to CFG_TUD_VENDOR
2019-07-19 16:23:56 +07:00
hathach
ed6fa460e9
stm32 minor change
2019-07-19 10:59:35 +07:00
hathach
83f7aacbb1
clean up
2019-07-16 18:43:06 +07:00
hathach
036e858543
add tud_control_vendor_request_cb()/tud_control_vendor_complete_cb(), expose usbd control transfer
...
rename usbd_control_transfer/status to tud_control_transfer/status
2019-07-16 18:14:47 +07:00
hathach
cb4e6837e9
clean up, rename internal driver control_request_complete to simply control_complete
2019-07-12 22:03:40 +07:00
hathach
2b7acd554a
updating webusb with cdc
2019-07-12 19:38:04 +07:00
hathach
164b26ee6b
change TUD_HID_INOUT_DESCRIPTOR epout & epin order
...
clean up, adding template for BOS & BOS platform descriptor
2019-07-12 14:53:11 +07:00
hathach
3b6013e78f
clean up
2019-07-12 14:43:01 +07:00
hathach
e74aa41552
added tud_descriptor_bos_cb(), add support for BOS get descriptor
2019-07-12 00:12:14 +07:00
hathach
5ebb606ecd
add BOS descriptor and device capability constant
2019-07-11 22:35:17 +07:00
hathach
f554a50507
release as 0.5.0
2019-07-10 23:54:11 +07:00
hathach
64e9c11b41
fix incorrect midi descriptor template
2019-07-09 10:40:14 +07:00
hathach
216ccc6e93
midi only use audio 1.0 without IAD
2019-07-05 16:46:11 +07:00
hathach
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
hathach
1b242cb3c6
clean up
2019-07-04 01:31:56 +07:00
hathach
b0e5a1a9ec
remove tud_midi_write_flush() send asap. rename tud_midi_connected() to tud_midi_mounted()
2019-07-04 01:27:51 +07:00
hathach
50f4c61d7c
fix midi_write prototype
2019-07-03 01:22:41 +07:00
hathach
1a0e02fa1b
tested midi example
2019-07-03 00:52:25 +07:00
hathach
62d3b91691
clean up
2019-07-02 18:23:42 +07:00
hathach
3f3ef6f4e6
clean up
2019-07-02 16:42:12 +07:00
hathach
57433135ce
fix midi template
2019-07-01 23:19:14 +07:00
hathach
e702328093
fix compiling
2019-07-01 23:11:16 +07:00
hathach
6991b28532
improving midi support, adding midi exmaple
...
rename TUSB_DESC_CLASS_SPECIFIC to TUSB_DESC_CS_INTERFACE
2019-07-01 22:38:06 +07:00
hathach
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
hathach
7156bfb54d
fix build error with midi, use usbd_edpt_xfer/busy for midi to replace dcd_*
2019-06-10 18:46:00 +07:00
hathach
dcfaec9efc
add HID_ASCII_TO_KEYCODE
2019-06-06 18:06:24 +07:00
hathach
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
hathach
a0307bafda
added usbd_edpt_xfer/usbd_edpt_busy to replace dcd_edpt_transfer/dcd_edpt_busy()
...
- improve fifo write/read_n with only one lock
- use usbd_edpt_xfer/usbd_edpt_busy for hid/cdc/msc class driver
- replace cdc read's pending_read_from_host by usbd_edpt_busy()
2019-05-29 16:55:15 +07:00
hathach
5f34c63660
should fix and work with #58
...
- add hid_test_js
2019-05-24 12:33:56 +07:00
hathach
f4762ff012
host fix address alloc when it reach max devices
2019-05-23 10:59:43 +07:00
hathach
3846645a28
fix tud_cdc_read_char()/tud_cdc_peek() to return signed char
...
- depending on compiler option "char" can be intepreted as unsigned char
2019-05-22 00:54:21 +07:00
hathach
bcf9718f9a
clean up
2019-05-15 22:51:49 +07:00
hathach
8ccecde18e
lpc1769 work with makefile
2019-05-15 12:57:31 +07:00
hathach
6e443d1918
enable CFG_TUSB_DEBUG on DEBUG build
2019-05-14 17:36:03 +07:00
hathach
910a94e9ca
clean up
2019-05-14 13:12:16 +07:00
hathach
454496316f
more endian convert
2019-05-14 13:06:38 +07:00
hathach
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
hathach
81fc7b7e2b
clean up endian convert function
2019-05-14 12:14:51 +07:00
hathach
3e24daac79
remove deprecated tusb_task, clean up tusb compiler
2019-05-14 12:03:06 +07:00
hathach
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
hathach
6135019230
clean up
2019-05-14 11:46:22 +07:00
hathach
f3a5ea65a9
add index to tud_descriptor_configuration_cb()
2019-05-12 19:55:15 +07:00
hathach
1174949308
change tud_descriptor_string_cb() to be consistent with other descriptor callback
2019-05-12 15:38:15 +07:00
hathach
ba2136486c
add tud_hid_descriptor_report_cb()
...
- remove tud_desc_set.hid_report
- remove tud_desc_set_t
2019-05-12 14:09:35 +07:00
hathach
de56a0ca89
add tud_descriptor_string_cb() for getting string descriptor from application
...
- remove tud_desc_set.string_arr/string_count
2019-05-11 16:31:52 +07:00
hathach
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
hathach
7063a0dd03
msc device will stall READ_CAPACITY & READ_FORMAT_CAPACITY if tud_msc_capacity_cb() get zero size
2019-05-09 23:33:55 +07:00
hathach
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
hathach
81cb1c9510
clean up
2019-05-07 00:03:42 +07:00
hathach
6e4dc2f23d
adding msc Start Stop to buitin command, but not complate yet
...
add tud_msc_start_stop_cb() as optional callback
2019-05-06 16:48:50 +07:00
hathach
efefbd3a4e
add Test Unit Ready to builtin command, add tud_msc_test_unit_ready_cb()
...
- rename tud_msc_maxlun_cb to tud_msc_get_maxlun_cb
2019-05-06 15:01:38 +07:00
hathach
fae9aba68f
add tud_msc_inquiry_cb() remove CFG_TUD_MSC_VENDOR/PRODUCT/PRODUCT_REV
2019-05-03 23:46:01 +07:00
hathach
f9d9eebfe1
support hid generic inout #58
...
- add report descriptor template TUD_HID_REPORT_DESC_GENERIC_INOUT
- add TUD_HID_INOUT_DESCRIPTOR & TUD_HID_INOUT_DESC_LEN
- add hid_generic_inout example
2019-05-02 14:30:49 +07:00
hathach
3387b9fca5
use tud_hid_set_report_cb for hid epout
2019-05-02 13:27:32 +07:00
hathach
353d415d3f
clean up
2019-05-02 13:27:00 +07:00
hathach
1c0ec61aa1
add tud_hid_out_report_cb() for hid epout
2019-05-02 00:08:39 +07:00
hathach
a25ca701cd
text clean up
2019-05-01 23:26:52 +07:00
hathach
c8b9293d68
rename hid report_buf to epin_buf
...
add epout_buf and use it for SET_REPORT request buffer
2019-05-01 20:45:05 +07:00
hathach
2050778763
clean up
2019-05-01 20:41:26 +07:00
hathach
c006f3dbce
adding optional ep out for hid
...
refactor usbd_open_edpt_pair
2019-05-01 19:29:56 +07:00
hathach
90fdae94f8
clean up
2019-05-01 18:21:08 +07:00
hathach
9fa5c8025f
clean up
2019-05-01 17:07:33 +07:00
hathach
84f81f6b21
simplify hid keyboard & mouse report to one API each
2019-05-01 17:06:18 +07:00
hathach
0b6999a28e
add tud_hid_set_idle_cb
...
- rename tud_hid_mode_changed_cb to tud_hid_mode_changed_cb
- add mouse ac pan descriptor template support
2019-05-01 16:53:35 +07:00
hathach
0ef7edb446
osal clean up
2019-05-01 01:46:39 +07:00
hathach
89ace295ba
add TUD_ to HID_REPORT_DESC_* template
2019-04-28 00:43:36 +07:00
hathach
b74eca4f12
add msc multiple lun support
...
- remove CFG_TUD_MSC_MAXLUN
- add tud_msc_maxlun_cb()
- add msc_dual_lun exmaple
2019-04-26 15:54:42 +07:00
hathach
67aa45f75f
remove CFG_TUD_HID_ASCII_TO_KEYCODE_LOOKUP
2019-04-25 21:41:21 +07:00
hathach
ff8fe28c98
move interface descriptor template to usbd.h, update exmaple
2019-04-19 13:16:06 +07:00
hathach
23bcf1cc7a
remove auto descriptor and its option CFG_TUD_DESC_AUTO
2019-04-18 23:59:21 +07:00
hathach
307ba23046
wrap up hid device refactor
2019-04-18 22:31:35 +07:00
hathach
a30461b078
update tud_hid_keyboard/mouse helper
2019-04-18 13:27:06 +07:00
hathach
8d2db4dd70
add tud_hid_mode_changed_cb()
2019-04-18 12:32:19 +07:00
hathach
1ffcadd373
hid update
2019-04-18 11:52:23 +07:00
hathach
cc2fce31e5
refactor hid, rename hid_generic to simply hid_
2019-04-18 00:36:17 +07:00
hathach
516964b3d3
add interface descriptor template
2019-04-17 13:43:07 +07:00
hathach
72575534f8
remove auto device descriptor
...
Application should declare its own device descriptor
2019-04-11 00:51:28 +07:00
hathach
6102183193
clean up
2019-04-11 00:22:18 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
6564580c3d
clean up
2019-04-02 16:23:13 +07:00
hathach
4af16efea7
add tud_ready() to hid_ready()
2019-04-02 02:14:39 +07:00
hathach
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
hathach
491b5936d5
usbd better support suspend/resume
2019-04-02 01:30:01 +07:00
hathach
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
hathach
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
hathach
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
hathach
f3a954e7de
self powered and remote wakeup support are from configuration descriptor attribute
2019-03-30 17:38:00 +07:00
hathach
ee6ed084f4
clean up text
2019-03-30 15:03:48 +07:00
hathach
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
hathach
cabf6abb4f
added tud_set_self_powered(), fix #50 reponse to GET_STATUS request
2019-03-30 14:34:38 +07:00
hathach
d9682f8240
replaced config_num by configured
2019-03-30 13:48:15 +07:00
hathach
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
hathach
28610198df
clean up
2019-03-29 17:42:10 +07:00
hathach
7d9b68a7b9
clean up control req a bit
2019-03-29 16:55:58 +07:00
hathach
3a38cde53d
support set/clear feature Device_remote_wakeup
2019-03-29 16:37:08 +07:00
hathach
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
hathach
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
hathach
8fb9fbb0b1
add tud_mounted() check in tud_cdc_connected()
...
mark device as disconnected immed with DCD_EVENT_UNPLUGGED
2019-03-27 23:58:24 +07:00
hathach
c09d754654
remove tud_msc_ready()
2019-03-27 23:47:59 +07:00
hathach
801f3c9d8d
more clean up
2019-03-27 21:00:15 +07:00
hathach
da452d4ba6
cleanup, remove the use of _TINY_USB_SOURCE_FILE_
2019-03-27 17:48:42 +07:00
hathach
f26fbaf404
clean up remove usbd_control_stall()
2019-03-27 16:26:52 +07:00
hathach
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
hathach
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
hathach
852abba918
Merge branch 'master' into develop
2019-03-27 00:46:32 +07:00
hathach
89b9ee2f52
revert to use pending_read_from_host (temp) since
2019-03-27 00:39:14 +07:00
hathach
aaf5714268
follow up to pr #46
2019-03-25 11:38:16 +07:00
hathach
fad8720215
Merge pull request #46 from tannewt/fix_cdc_out
...
Fix slow CDC OUT by NAKing
2019-03-24 03:27:58 -07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
d866999bf0
remove idle rate enforcement, should be done in application level
2019-03-23 21:46:51 +07:00
hathach
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
hathach
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
hathach
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
Scott Shawcroft
909891325a
Fix slow CDC OUT by NAKing
...
This NAKs CDC OUT packets when the ring buffer doesn't have
enough space for it. This makes CDC OUT reliable rather than
allowing overwriting into the ring buffer.
2019-03-21 14:52:56 -07:00
hathach
3574688d26
more with mynewt
2019-03-21 00:54:42 +07:00
hathach
a1a6220ac8
update osal for mynewt
2019-03-21 00:36:52 +07:00
hathach
87962a222d
clean up
2019-03-20 23:12:12 +07:00
hathach
da55610f43
clean up
2019-03-20 20:19:21 +07:00
hathach
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
hathach
4647ad8136
clean up
2019-03-20 14:41:35 +07:00
hathach
f932cf3854
stm32 update fifo in comment
2019-03-17 15:16:52 +07:00
hathach
5e92d67015
stm32 update TX Fifo for edpt IN, both CDC + MSC work great
...
- call dcd_event_xfer_complete() when enough bytes received
- add dcd_get_frame_number()
2019-03-15 18:43:09 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
hathach
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
hathach
a19455d1ff
follow up to PR #39
2019-03-04 11:51:36 +07:00
Gregory P. Smith
fa8141f31f
Fixes #33 : Remove invalid use of strncpy().
...
This was causing a stringop-truncation compiler warning in gcc 8 when
the #defined values being copied from were string literals.
`error: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Werror=stringop-truncation]`
These fields aren't NUL terminated C strings, they are a fixed width buffer
that is supposed to be space (0x20) padded.
2019-03-03 19:41:41 -08:00
William D. Jones
c95ad426c6
stm32f4: Refactor IN and OUT endpoint interrupt handling into their own functions.
2019-02-27 11:01:08 -05:00
William D. Jones
f43161353c
stm32f4: Refactor RX FIFO read into its own function; remove RXFLVL
...
resetting (read only) and masking (no nested ints).
2019-02-27 10:39:37 -05:00
William D. Jones
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
hathach
f2d76a39eb
mscd: send scsi status before invoke read10/write10/scsi complete callback
2019-02-22 01:31:13 +07:00
Scott Shawcroft
c870efffc0
Fix write protected MSC. The bits were flipped.
2019-02-20 15:12:36 -08:00
William D. Jones
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
William D. Jones
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
William D. Jones
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b
) cleanups.
2019-02-08 12:05:44 -05:00
William D. Jones
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
William D. Jones
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
William D. Jones
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
William D. Jones
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
William D. Jones
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
William D. Jones
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
William D. Jones
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
William D. Jones
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
William D. Jones
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
William D. Jones
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
William D. Jones
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
William D. Jones
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
William D. Jones
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
59c1b4b427
zero init internal class/device data
2019-01-29 19:39:34 +07:00
hathach
e4e8413acc
add tusb_inited() API, check for inited() before running device/host task
2019-01-29 19:05:07 +07:00
hathach
777f41a066
clean up
2019-01-29 18:47:29 +07:00
William D. Jones
9e76635465
stm32f4: Clarify required FIFO sizes and observed behavior.
2019-01-24 04:18:53 -05:00
William D. Jones
fe7f304ad4
stm32f4: Start adding OUT interrupt handling, fix buffer sizes; RXFIFO
...
too low for some reason, TXFIFO EP0 used wrong bitmask.
2019-01-24 03:06:57 -05:00
hathach
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
William D. Jones
01117fb965
stm32f4: Finish dcd_edpt_xfer implementation (OUT xfers not functional yet).
2019-01-23 03:31:44 -05:00
William D. Jones
b41f610514
stm32f4: Remember to turn off TXFE when IN xfer is done; it not
...
automatically cleared like EPENA.
2019-01-23 02:24:29 -05:00
William D. Jones
836d13fc4b
stm32f4: Fix FIFO write logic (requires 32 bit writes).
2019-01-23 02:06:07 -05:00
William D. Jones
aa9a7e882c
stm32f4: Properly set control endpoint max packet size.
2019-01-23 00:55:45 -05:00
William D. Jones
17e418bce4
stm32f4: Fix incorrect xfer length for short packet IN xfers.
2019-01-23 00:44:55 -05:00
William D. Jones
d1150432fe
stm32f4: Remove assumption that EP 0 is only control endpoint.
2019-01-23 00:12:33 -05:00
William D. Jones
51c0ce3f6b
stm32f4: Implement interrupt handling for IN packets (first signs of life).
2019-01-22 23:51:58 -05:00
William D. Jones
43c890615a
stm32f4: Start implementing dcd_edpt_xfer.
2019-01-22 00:42:43 -05:00
William D. Jones
69f5f18fd6
stm32f4: Remove some template commented code.
2019-01-21 23:45:40 -05:00
William D. Jones
71e1b9d045
stm32f4: Setup packet events in tinyusb now functional.
2019-01-19 21:12:20 -05:00
William D. Jones
5720aef7bb
stm32f4: Implement setup packing receive, fix typo in FIFO receive size.
2019-01-19 20:03:18 -05:00
William D. Jones
06c15bf913
stm32f4: Complete initialization for EP0 (packet handling not implemented).
2019-01-19 17:56:53 -05:00
William D. Jones
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
William D. Jones
03cbd406cb
dcd_stm32f4: Add USB init skeleton based on manual (does not enumerate).
2019-01-11 19:53:24 -05:00
William D. Jones
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
William D. Jones
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
William D. Jones
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
Scott Shawcroft
52abbec7c5
Remove txbuf in favor of fifo.
...
Fifo incurs a second copy into a USB buffer but this ensures the
correct USB buffer alignment. Some LPC chips require 64 byte
alignment that txbuf couldn't do.
2019-01-08 14:10:40 -08:00
Scott Shawcroft
048fc9694c
Split out txbuf and add unit test.
2019-01-04 18:27:00 -08:00
Scott Shawcroft
a3173b8de4
Add USB Midi support.
...
It also introduces a txbuffer which copies data into it but passes
the buffer straight to the USB rather than another copy.
2019-01-04 12:16:27 -08:00
hathach
257d60fe1a
white spaces
2018-12-21 12:58:53 +07:00
hathach
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
hathach
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
hathach
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
hathach
351f0d7d78
merge binary.h into tusb_common.h
2018-12-14 15:45:49 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
a3713f801d
clean up compiler attribute
2018-12-14 13:08:21 +07:00
hathach
a6b9432600
clean up error enum
2018-12-13 14:57:21 +07:00
hathach
1c49c479ca
seperate tusb_task() to tud_task() and tuh_task()
...
tusb_task() still exists for backward compatible
2018-12-13 14:51:37 +07:00
hathach
af1ffe4675
remove task void* param
2018-12-13 13:53:43 +07:00
hathach
bc46dc6edf
osal clean up
...
remove OSAL_TASK_DEF, osal_task_create. Applicaton should create a task
and call tinyusb_task(). This make API consistent with NO OS.
2018-12-13 13:49:09 +07:00
hathach
a76d3a8726
clean up
2018-12-12 14:53:11 +07:00
hathach
bb544a0951
minor update
2018-12-12 14:43:45 +07:00
hathach
c1c501e0c2
change usbd xfer_cb return type to bool
2018-12-12 13:12:06 +07:00
hathach
b6cb4757d2
change class driver open return type to bool
2018-12-12 13:00:59 +07:00
hathach
5fd60e5761
clean up
2018-12-12 12:36:40 +07:00
hathach
6c0b0917e1
rename descriptor_* helper to tu_desc_*
2018-12-12 12:01:15 +07:00
hathach
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
hathach
e3514b8054
rename hcd_device_remove to hcd_device_close
2018-12-12 11:34:09 +07:00
hathach
c88e16bd11
clean up
2018-12-12 00:48:53 +07:00
hathach
aaf65831d8
update ohci for hcd_device_remove
2018-12-12 00:48:41 +07:00
hathach
def20ce35b
clean up ehci warnings
2018-12-12 00:13:48 +07:00
hathach
67d6d753d6
replace all hcd pipe close by hcd_device_remove
2018-12-12 00:00:33 +07:00
hathach
c94df51503
more clean up
2018-12-11 19:35:08 +07:00
hathach
364666c206
ehci clean up
2018-12-11 17:05:56 +07:00
hathach
d05021009b
more ohci clean up
2018-12-11 16:29:43 +07:00
hathach
600fac1845
fix build error with ohci
2018-12-11 16:18:56 +07:00
hathach
dbc560658a
more hcd_pipe to hcd_edpt rename
2018-12-11 13:15:05 +07:00
hathach
0d04e6eb96
rename to hcd_edpt_open()
2018-12-11 13:12:21 +07:00
hathach
7deac61d5f
clean up
2018-12-11 13:09:40 +07:00
hathach
b8c63ff624
ehci struct rename
2018-12-11 13:01:07 +07:00
hathach
b0717275c8
ehci periodic
2018-12-11 10:50:05 +07:00
hathach
73e6bb6f5d
clean up
2018-12-11 01:06:10 +07:00
hathach
7c2056defb
remove pipe handle in host msc
2018-12-11 01:03:15 +07:00
hathach
7a626dbc8b
completely remove pipe handle for cdc/hub/ehci
2018-12-11 00:56:21 +07:00
hathach
e863c99a6f
fix msc host
2018-12-10 23:15:53 +07:00
hathach
212deaf2f8
usbh name change
2018-12-10 22:19:01 +07:00
hathach
9c3c782b64
host msc built but got hardfault with inquiry command
2018-12-10 22:11:02 +07:00
hathach
dffe9b335e
clean up host pipe api
2018-12-10 20:26:47 +07:00
hathach
5886ccdb03
ehci clean up
2018-12-10 20:16:26 +07:00
hathach
4e7596ca9c
add tuh_mount_cb/tuh_umount_cb
2018-12-10 19:25:57 +07:00
hathach
9c4c797502
add ep addr to host cdc
2018-12-10 19:01:28 +07:00
hathach
0ae8a1aa89
remove pipe handle.dev_addr
2018-12-10 16:58:17 +07:00
hathach
a486da33ee
usbh clean up
2018-12-10 05:55:02 +07:00
hathach
57233cead7
rename usbh_xfer_isr to hcd_event_xfer_complete
2018-12-10 05:47:33 +07:00
hathach
a31f83dbb0
removing pipe handle
2018-12-10 05:44:08 +07:00
hathach
75baedf27d
removing pipe handle, remove xfer type
2018-12-10 05:33:25 +07:00
hathach
8ef93ef85d
usbh remove class code in xfer isr callback
2018-12-10 05:19:08 +07:00
hathach
ac67e0ea3f
clean up
2018-12-10 05:15:49 +07:00
hathach
6a6e7d0ecb
refactor usbh class driver
2018-12-10 05:07:22 +07:00
hathach
05913a7350
change usbh class driver open signature
2018-12-09 12:34:05 +07:00
hathach
637285e9ae
clean up ehci
2018-12-09 00:10:49 +07:00
hathach
f6f0910778
hub clean up
2018-12-08 20:56:56 +07:00
hathach
d3ac4c14a3
refactor hcd api
2018-12-08 20:51:48 +07:00
hathach
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
hathach
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
hathach
98dd0c4d4d
clean up
2018-12-07 23:28:51 +07:00
hathach
e4fd9fbaf4
seperate control xfer to 3 tds for ohci
...
- ohci only work with 1st transfer with specific timing. TODO fix it
later
2018-12-07 23:16:06 +07:00
hathach
6c49848d59
ohci got device not response condition in control transfer
2018-12-07 22:01:26 +07:00
hathach
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
hathach
e6e3679136
simple cdc host demo work
2018-12-07 17:37:54 +07:00
hathach
13d08cd636
adding new hcd api, tested working with control xfer.
...
- hcd_edpt_open
- hcd_edpt_xfer
- hcd_edpt_xfer
2018-12-07 17:31:35 +07:00
hathach
9b74f0e98f
add connect to cdc for testing
2018-12-07 15:07:00 +07:00
hathach
366ab79776
able to build host hid
2018-12-07 14:57:58 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
89820a36a1
able to build with host msc
2018-12-07 12:56:42 +07:00
hathach
9478c647e3
change usbh_control_xfer name and signature
2018-12-07 12:23:37 +07:00
hathach
c93fb23693
usbh rename vars
2018-12-07 00:47:16 +07:00
hathach
2fe9abe71f
change usbh queue to generic event queue
2018-12-06 23:45:24 +07:00
hathach
ac829c0a87
minor clean up
2018-12-06 22:56:58 +07:00
hathach
07c3fd5e1e
clean up hub
2018-12-06 22:47:49 +07:00
hathach
7d3ff7aff6
rename CFG_TUSB_HOST_CDC/MSC to CFG_TUH_CDC/MSC
2018-12-06 22:24:31 +07:00
hathach
5b09774ae0
clean up usbh, rename doxygen folder to docs
2018-12-06 21:46:34 +07:00
hathach
1d3583785f
change osal_semaphore_wait to return bool
2018-12-06 17:31:25 +07:00
hathach
5f7d7a34f5
able to complete enumeration with os none blocking
2018-12-06 00:38:00 +07:00
hathach
5a7493ed42
fix more host build error
2018-12-05 21:12:10 +07:00
hathach
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
hathach
4537ba66e5
fixing build error with host stack
2018-12-05 20:26:55 +07:00
hathach
27793cbd3d
fix travis build
2018-12-05 17:43:09 +07:00
hathach
d887829b4c
change usbd_init() return to bool for simplicity
2018-12-05 17:30:04 +07:00
hathach
3dc0653d70
clean up
2018-12-05 17:09:30 +07:00
hathach
6f3898572d
add role to OSAL_QUEUE_DEF() to disable correct dcd/hcd isr
2018-12-05 17:01:19 +07:00
hathach
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
hathach
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
hathach
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
hathach
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
hathach
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
hathach
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
hathach
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
hathach
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
804c60304e
adding ses lpc13xx
2018-11-30 13:25:58 +07:00
hathach
3c49bfb588
remove obsolete example
2018-11-30 13:05:20 +07:00
hathach
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
hathach
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
hathach
658c2ff570
rename
2018-11-30 12:56:09 +07:00
hathach
723e02780d
clean up
2018-11-30 12:51:54 +07:00
hathach
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
hathach
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
hathach
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
hathach
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
hathach
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
hathach
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
hathach
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
hathach
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
hathach
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
hathach
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
hathach
8b03b6d3b4
add Auto descriptor endpoint num config to support lpc17xx
...
CFG_TUD_DESC_*_EPNUM
2018-11-28 16:10:31 +07:00
Scott Shawcroft
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
hathach
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
Scott Shawcroft
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
Scott Shawcroft
47fabe42ed
One tweak to make -Wdiscarded-qualifiers happy.
2018-11-23 12:48:55 -08:00
Scott Shawcroft
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
Scott Shawcroft
246c28db1a
Turn off interrupts when working with the event queue.
2018-11-23 11:18:53 -08:00
Scott Shawcroft
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
hathach
394a22ecf7
remove pragma GCC diagnostic
2018-11-23 15:25:25 +07:00
hathach
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
hathach
a619ff88a3
rename xfer complete enum
2018-11-23 15:17:43 +07:00
hathach
cb8782e5f2
rename tusb_event_t to xfer_result_t
2018-11-23 15:14:47 +07:00
hathach
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
hathach
4e8400e6fb
more clean up
2018-11-22 21:58:06 +07:00