6baa79b330
board test works
2019-11-04 14:54:04 +07:00
5d585c03bd
dcd_msp430x5xx: Improve comments regarding SETUP packet handling.
2019-10-29 14:08:39 -04:00
3f0f7cfd07
dcd_msp430x5xx: Clarify hardware STALL behavior and current vs ideal
...
behavior of driver in comments.
2019-10-29 12:52:56 -04:00
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
d0146be00b
dcd_msp430x5xx: Fix typo in copy-paste in transmit_packet.
2019-10-10 04:19:48 -04:00
c8e899fef0
dcd_msp430x5xx: Improve SETUP packet and EP0 NAK interactions, per
...
42.3.1.3 in Reference Manual; fix is incomplete but works.
2019-10-10 04:02:35 -04:00
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
0cea82568c
Disable/enable only USB interrupt
2019-10-08 09:58:56 +02:00
9923604221
Send SUSPEND and RESUME signals
2019-10-07 14:04:48 +02:00
b3872febe2
Disable/enable interrupt
2019-10-07 14:03:02 +02:00
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
05914de109
dcd_msp430x5xx: Fix typos in dcd_edpt_clear_stall.
2019-10-02 22:36:45 -04:00
3edb5548e9
dcd_msp430x5xx: Ensure DBUF bit is cleared on endpoint open, as it
...
could get spuriously set in debugging sessions. cdc_msc functional.
2019-10-02 01:19:12 -04:00
820a3705f5
Merge branch 'master' into develop
2019-10-02 12:13:47 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
1e193212d7
Add testcase for EP0 stall recovery to USBTMC test script.
2019-10-02 00:31:47 -04:00
e5f38e3e86
Remove references to EP kind.
2019-10-02 00:11:16 -04:00
838cfe02c1
Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0
2019-10-02 00:09:07 -04:00
19ee519926
dcd_msp430x5xx: Correct byte count masks in transmit/receive routines.
2019-10-02 00:01:58 -04:00
54478aaa2a
dcd_msp430x5xx: Add STALL support for nonzero endpoints.
2019-10-01 23:28:41 -04:00
fad44c03c8
dcd_msp430x5xx: Fix TOGGLE bit behavior, clear stall when endpoint
...
opened due to reset potentially not resetting everything.
2019-10-01 23:03:39 -04:00
d27291f288
Merge branch 'master' into develop
2019-09-30 14:45:34 +07:00
b623e3023e
dcd_msp430x5xx: Implement receive_packet for all endpoints, correct
...
some mistakes in transmit_packet.
2019-09-29 03:58:30 -04:00
549ad1d9b6
dcd_msp430x5xx: Fix missing mask when posting IN xfer events.
2019-09-29 03:02:59 -04:00
838b431fac
dcd_msp430x5xx: Implement transmit_packet for nonzero endpoints. Untested.
2019-09-29 02:43:05 -04:00
2247f132ca
Implement dcd_edpt_xfer for nonzero endpoints.
2019-09-29 02:22:09 -04:00
ea0e799df6
dcd_msp430x5xx: Fix clear stall logic.
2019-09-29 02:17:59 -04:00
529efcc0d2
dcd_msp430x5xx: Implement dcd_edpt_open.
2019-09-29 00:21:40 -04:00
5d9f833915
dcd_msp430x5xx: Implement STALL logic for EP 0.
2019-09-28 02:09:03 -04:00
63c94ff684
dcd_msp430x5xx: Improve EP0 IN handling (reuse short_packet field).
2019-09-28 01:51:05 -04:00
030560792d
dcd_msp430x5xx: Implement dcd_set_address.
2019-09-27 21:59:45 -04:00
3ac43076da
dcd_msp430x5xx: Implement EP0 IN xfers, clean up.
2019-09-27 21:22:19 -04:00
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
4ccdc5522d
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 12:41:46 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
f19082f02d
Reset TX and RX endpoints to NAK when receiving setup packet.
2019-09-25 20:55:15 -04:00
048e0448c0
ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar.
2019-09-25 20:54:59 -04:00
01b4115b0b
dcd_msp430x5xx: Fix Setup packet delay by actually enabling
...
corresponding interrupt.
2019-09-24 04:06:34 -04:00
550e8215f3
dcd_msp430x5xx: Setup packets are now received successfully (with delay).
2019-09-24 03:43:51 -04:00
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
950614a841
msp430f5529: Implement dcd_int_enable/disable.
2019-09-23 22:58:49 -04:00
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
7ba8e81852
Merge pull request #177 from cr1901/fifo-fix
...
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-22 11:38:54 +07:00
108f756e22
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-21 23:01:06 -04:00
ce9f133d25
FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos.
2019-09-21 12:00:04 -04:00
94c9cf0eff
doc update
2019-09-20 16:14:35 +07:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
525b4cdb72
Use ESOF for wakeup timing.
2019-09-19 09:51:40 -04:00
642afeea8b
s/static const/define/
2019-09-19 09:30:16 -04:00
85623584f9
Remove debug assertions.
2019-09-19 09:24:52 -04:00
5fcc1468eb
Merge branch 'master' into fsdev_smallPacket
2019-09-19 09:16:48 -04:00
89ffe78f84
ST FSDEV: No need to always reset the interrupt priority, also add some synchronization primitives after disabling interrupts.
2019-09-16 22:56:17 -04:00
a33a854793
Include board header file... :X
2019-09-16 20:56:57 -04:00
d341337c6a
Implement remote wakeup + perhaps better sleep?
2019-09-16 20:25:50 -04:00
6b9783cead
s/unsigned int/uint32_t/
2019-09-16 09:20:15 -04:00
0c70948d0d
Merge pull request #163 from hathach/develop
...
fix #143
2019-09-16 16:37:27 +07:00
a37d2d64be
fix #143
2019-09-16 13:32:47 +07:00
05c13342a3
Implement EP with size <64.
2019-09-15 23:51:42 -04:00
18303e742e
Covert macros to inline functions.
2019-09-15 23:46:03 -04:00
ae873a709e
Wrote TX instead of RX.
2019-09-15 23:33:36 -04:00
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
4ea212a432
This demonstrates that I don't pre-build things before committing them... oops.
2019-09-13 23:52:43 -04:00
c831311a12
Off-by-one error in Synopsys assertions. (and move some braces to their own lines.
2019-09-13 23:38:58 -04:00
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
d3507b0787
Merge remote-tracking branch 'origin/master' into stfsdev_cleanups
2019-09-11 20:36:48 -04:00
3326b9d008
Use types with explicit bit widths.
2019-09-11 20:33:47 -04:00
7f166d860d
stm32f7 work with dcd synopsis
...
close #124
2019-09-11 22:48:07 +07:00
7b93177890
Use TU_VERIFY_STATIC, use more uint instead of uint8_t/uint16_t. Create reg16_clear_bits function to reduce typec conversion warnings.
2019-09-11 09:45:48 -04:00
784dc52b62
Update header comments.
2019-09-11 09:44:25 -04:00
4cf2b30759
Fix bug where the EPREGs were not being initialized as expected.
2019-09-11 09:43:57 -04:00
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
23d39f2b15
Remove OPT_MCU_STM for L and G series.
2019-09-10 12:13:36 -04:00
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
49c58be4ce
Fix silly typo in the F3xx support.
2019-09-10 01:31:14 -04:00
bc2a65b20b
A few bug fixes, remove the unstested device notices, note supported boards in READMEs, and implement PMA
...
access stride (used on MCU's with 512 byte USB buffers).
2019-09-10 01:03:24 -04:00
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
5ec59c2a30
Add STM32 FSDEV driver.
2019-09-09 14:55:39 -04:00
b4c8a09f20
Remove STM32 F3 port.
2019-09-09 13:29:26 -04:00
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
82cd4b5350
dcd_stm32f4: Merge relevant changes from dcd_stm32h7.
2019-09-09 10:27:46 -04:00
3efc81b285
dcd_stm32h7: Merge relevant changes from dcd_stm32f4. USB2 -> USB works as alias.
2019-09-09 10:14:20 -04:00
e123cad7bb
enhance dcd stm32f4 to support max 4 or 6 endpoints on 407 or 412
2019-09-08 23:10:51 +07:00
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
56f1ccd68a
fix #97
2019-09-05 21:59:19 +07:00
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
8f8ca77a91
stm32h7: Mark USB FIFOs as volatile, otherwise optimizations will remove
...
reads/writes to the FIFOs.
2019-09-04 01:06:07 -04:00
910fd867c7
stm32h7: Fix indentation error where OUT XFER interrupt wasn't handled
...
in the correct scope.
2019-09-03 01:37:44 -04:00
1a3dc9cba1
stm32h7: USB_OTG_FS -> USB2_OTG_FS.
2019-09-03 01:28:41 -04:00
f703a74daa
stm32h7: Implement STALL logic for endpoints.
2019-09-03 01:28:41 -04:00
28b131ea94
stm32h7: Implement dcd_edpt_open. cdc_msc_hid demo functional.
2019-09-03 00:37:50 -04:00
d4302dacc5
stm32h7: Fix accidental overwrite of STUPCNT field in DOEPTSIZ register.
2019-09-03 00:25:21 -04:00
9210167603
stm32h7: Implement dcd_set_address.
2019-09-02 21:00:30 -04:00
0d0b802ee0
stm32h7: Implement IN and OUT receive for EP0; device descriptor returned.
2019-09-02 19:32:11 -04:00
f602534536
stm32h7: Implement setup packet events.
2019-09-02 13:34:33 -04:00
074681da8b
dma of lpc54114 can also execute up to 64 bytes each transfer
...
There is still issue with cdc_msc_hid example
2019-09-01 17:05:34 +07:00
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
957201fc58
fix undef __ARM_ARCH_6M__
2019-09-01 11:59:50 +07:00
2d041aaa1d
clean up
2019-09-01 08:11:22 +07:00
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
8b165e1024
stm32h7: Ensure FS (and the only) PHY is selected for OTG_HS2.
2019-08-30 22:07:35 -04:00
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
ed6fa460e9
stm32 minor change
2019-07-19 10:59:35 +07:00
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
2050778763
clean up
2019-05-01 20:41:26 +07:00
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
da55610f43
clean up
2019-03-20 20:19:21 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
f932cf3854
stm32 update fifo in comment
2019-03-17 15:16:52 +07:00
5e92d67015
stm32 update TX Fifo for edpt IN, both CDC + MSC work great
...
- call dcd_event_xfer_complete() when enough bytes received
- add dcd_get_frame_number()
2019-03-15 18:43:09 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
c95ad426c6
stm32f4: Refactor IN and OUT endpoint interrupt handling into their own functions.
2019-02-27 11:01:08 -05:00
f43161353c
stm32f4: Refactor RX FIFO read into its own function; remove RXFLVL
...
resetting (read only) and masking (no nested ints).
2019-02-27 10:39:37 -05:00
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b) cleanups.
2019-02-08 12:05:44 -05:00
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
777f41a066
clean up
2019-01-29 18:47:29 +07:00
9e76635465
stm32f4: Clarify required FIFO sizes and observed behavior.
2019-01-24 04:18:53 -05:00
fe7f304ad4
stm32f4: Start adding OUT interrupt handling, fix buffer sizes; RXFIFO
...
too low for some reason, TXFIFO EP0 used wrong bitmask.
2019-01-24 03:06:57 -05:00
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
01117fb965
stm32f4: Finish dcd_edpt_xfer implementation (OUT xfers not functional yet).
2019-01-23 03:31:44 -05:00
b41f610514
stm32f4: Remember to turn off TXFE when IN xfer is done; it not
...
automatically cleared like EPENA.
2019-01-23 02:24:29 -05:00
836d13fc4b
stm32f4: Fix FIFO write logic (requires 32 bit writes).
2019-01-23 02:06:07 -05:00
aa9a7e882c
stm32f4: Properly set control endpoint max packet size.
2019-01-23 00:55:45 -05:00
17e418bce4
stm32f4: Fix incorrect xfer length for short packet IN xfers.
2019-01-23 00:44:55 -05:00
d1150432fe
stm32f4: Remove assumption that EP 0 is only control endpoint.
2019-01-23 00:12:33 -05:00
51c0ce3f6b
stm32f4: Implement interrupt handling for IN packets (first signs of life).
2019-01-22 23:51:58 -05:00
43c890615a
stm32f4: Start implementing dcd_edpt_xfer.
2019-01-22 00:42:43 -05:00
69f5f18fd6
stm32f4: Remove some template commented code.
2019-01-21 23:45:40 -05:00
71e1b9d045
stm32f4: Setup packet events in tinyusb now functional.
2019-01-19 21:12:20 -05:00
5720aef7bb
stm32f4: Implement setup packing receive, fix typo in FIFO receive size.
2019-01-19 20:03:18 -05:00
06c15bf913
stm32f4: Complete initialization for EP0 (packet handling not implemented).
2019-01-19 17:56:53 -05:00
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
03cbd406cb
dcd_stm32f4: Add USB init skeleton based on manual (does not enumerate).
2019-01-11 19:53:24 -05:00
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
e3514b8054
rename hcd_device_remove to hcd_device_close
2018-12-12 11:34:09 +07:00
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
658c2ff570
rename
2018-11-30 12:56:09 +07:00
723e02780d
clean up
2018-11-30 12:51:54 +07:00
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
4e8400e6fb
more clean up
2018-11-22 21:58:06 +07:00
a1faf5c9cb
clean up dcd lpc43xx
2018-11-22 21:37:23 +07:00
hathach