958512a5bd
clean up more warnings
2014-03-13 18:43:52 +07:00
6fbca0ea87
remove legacy code of msc_device.c read10 & write10
...
clean up some warnings
2014-03-13 18:25:20 +07:00
f1692c93ac
fix some warnings
2014-03-13 18:11:59 +07:00
8fbafc460c
fix a problem with dcd 13uxx dcd_pipe_clear_stall that should clear toggle for buffer0 (instead of active buffer)
...
as the next transfer is always forced to be happened on buffer0
2014-03-13 17:06:18 +07:00
1940f9f0f7
clean up
2014-03-13 16:17:38 +07:00
8e2d263742
clean up
2014-03-13 15:36:17 +07:00
fa83ba32a5
fix all build error with IAR
...
- host/host_freertos/host_freertos.ewp
- host/host_os_none/host_os_none.ewp
- device/device_os_none/device_os_none.eww
fix IAR ending warning
2014-03-13 13:23:33 +07:00
151c012fde
fix all build problem with keil & lpcxpresso for host os none, host freertos, device os none
2014-03-13 12:04:37 +07:00
1610aa3e29
fix build for host freertos xpresso
2014-03-13 00:12:18 +07:00
1d98e895fa
fix freertos host keil build
2014-03-12 23:43:13 +07:00
eda269487b
fix keil host os none
2014-03-12 23:35:54 +07:00
156ae28cd6
fix build error with keil device os none
2014-03-12 23:27:10 +07:00
9776fb6d1a
update lpc13u cmsis to 3.20
2014-03-12 23:05:51 +07:00
fa332a6150
update xpresso 11u
2014-03-12 23:01:02 +07:00
c92bdbac74
update lpc11u cmsis to 3.20
2014-03-12 22:30:02 +07:00
368d09695f
fix build error with lpcxpresso device os none
2014-03-12 22:22:00 +07:00
97f95c61f6
update CMSIS core for lpc176x
2014-03-12 18:39:17 +07:00
4571bf17d4
all host os none configure can be build now
2014-03-12 18:15:47 +07:00
a2dcade88f
ngx works ok
2014-03-12 18:05:36 +07:00
204e057dce
host os none for LPCxpresso1769 & EA4357 works
2014-03-12 17:57:20 +07:00
14e48bd989
fixing build error
2014-03-12 17:45:17 +07:00
8db8294af2
move mcu cmsis file to /mcu
2014-03-12 17:20:24 +07:00
d98bc0a64b
move boards to root folder
2014-03-12 17:18:50 +07:00
a7e14b4646
clean up
2014-03-12 17:00:51 +07:00
1ad138e322
fix IAR end line warning
2014-03-12 16:33:33 +07:00
6ceb992f2c
clean up
2014-03-12 15:57:02 +07:00
2e9ab27e28
seems like 43xx code requires an terminal (uart,SWO) connected to be able to run
2014-03-12 15:44:30 +07:00
4efc5fecf7
all device work with all mcu & tools
2014-03-12 15:14:57 +07:00
1e957bb672
change dcd 176x alignment placement to work with IAR
2014-03-12 15:11:48 +07:00
92d28c96eb
clean all IAR ending warning
2014-03-12 14:59:57 +07:00
bb8602ce41
clean up IAR ending warning
2014-03-12 14:49:51 +07:00
0f0d9d127b
able to build lpc11u with IAR
...
clean ending warming with IAR
2014-03-12 14:43:58 +07:00
b6e4c0d348
a fix to IAR's incapability to force struct's member on specified alignment
2014-03-12 14:28:43 +07:00
9ba209cda0
IAR line ending warning
2014-03-12 14:10:38 +07:00
8f03dea95a
fix iar warning
2014-03-12 14:03:17 +07:00
c92b03edfb
added scatter file for lpc11u & lpc13u for it to run with keil
2014-03-12 12:49:59 +07:00
13c3a4e346
remove host config from device demo
2014-03-12 11:05:40 +07:00
7f377b7e5b
improve MSC host demo with
...
- remove command
- move (rename) command
2014-03-11 23:34:47 +07:00
f55ae521a0
enhance cp command to accept dest path as an folder
2014-03-11 22:31:34 +07:00
d2ee92da48
move keil_ram.ini to bsp/lpc43xx/keil_ram.ini
...
device os none for NGX4330 work with keil
2014-03-11 17:24:30 +07:00
52785c9fd6
NGX4330 device os none work well with lpcxpresso
2014-03-11 17:16:13 +07:00
d6566400fd
fix device typo build error
2014-03-11 16:57:21 +07:00
6a736db159
try to port lpc11uxx device demo with IAR
2014-03-10 15:31:12 +07:00
3555abc378
cannot get IAR work with lpc1769 device demo
2014-03-10 15:02:11 +07:00
b586fe632a
change desc_str_table to array of pointer of uint8_t* to be compatible with IAR (lack of support for VLA initialization)
...
IAR device os none works with ea4357
2014-03-10 14:20:38 +07:00
ad72db5aea
change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code
...
change pipe xfer API buffer from void* to uint8_t*
change FIFO_DEF to have a separated buffer to be compatible with IAR\
refractor IAR data alignment pragma
2014-03-10 13:13:13 +07:00
1c73d2f923
keil work with lpc17xx device
2014-03-10 11:46:51 +07:00
802bb80aef
move WinCDCdriver.inf
2014-03-10 11:40:17 +07:00
d5f278bbf0
clean up dcd_lpc175x_6x.c
2014-03-10 11:36:19 +07:00
33442a74b4
fix board_rf1ghznode.c build error
2014-03-09 16:55:13 +07:00
73ac4b4c80
rename tusbd_msc_scsi_received_isr to tusbd_msc_scsi_cb
...
fix the status phase true --> false
ASSERT_STATUS( dcd_pipe_xfer( p_msc->edpt_in , p_csw, sizeof(msc_cmd_status_wrapper_t), false) );
board ea4357 added P9_5 pull down for device connect
2014-03-09 15:30:57 +07:00
e506f4cae2
ported board_buttons API to EA4357 but device is not mounted yet
2014-03-07 15:31:41 +07:00
01760794fe
lpc1347 mouse & keyboard & cdc works well
2014-03-07 14:54:19 +07:00
05474e4bd2
refractor mouse app
2014-03-07 13:05:43 +07:00
3d17212f29
added board_buttons for lpcxpresso/board_lpcxpresso1769.c
2014-03-07 12:45:49 +07:00
26b1b879dd
refractor device mouse app to use board_buttons
2014-03-06 23:48:44 +07:00
4b8c0d97c6
add board_buttons API and refractor device keyboard app
2014-03-06 23:26:40 +07:00
f39444a065
IAR nonos/freertos can run with lpc17xx but cannot mount any device (failed on the first 8 byte descriptors)
2014-03-06 15:04:11 +07:00
9fce2e9c18
keil host 17xx work, but os_none has problem with copy command in msc example
2014-03-06 14:56:06 +07:00
f0e705c8da
IAR host freertos works with EA4357
2014-03-06 12:51:16 +07:00
301be3203c
refractor vendor/freertos
2014-03-06 11:52:21 +07:00
dcc58a7afc
refractor app_os_prio.h
2014-03-06 11:37:37 +07:00
de7437852b
remove IAR debug config
2014-03-06 10:42:31 +07:00
d26182884c
change host os none to host_freertos
2014-03-06 10:39:28 +07:00
843114675c
added IAR support for host freertos
2014-03-06 10:33:37 +07:00
fee8e5227b
IAR work well with EA4357 on host os none
2014-03-06 10:29:57 +07:00
c35e668dc4
IAR host os none work well with ea4357
2014-03-05 21:37:53 +07:00
dea4583549
refractor remove board_uart_send & board_uart_recv from board API
2014-03-05 17:10:39 +07:00
962e8a2546
remove other heap 1-3 of freeRTOS
...
ngx4330 work well with lpc/keil for non/freeRTOS
2014-03-05 16:44:37 +07:00
c16ea6253a
remove lwipopts.h in freertos project
2014-03-05 16:10:48 +07:00
043e5dbf3c
somehow could not get printf work with IAR both SWD & uart on NGX4330
2014-03-05 15:03:38 +07:00
62e2a44d71
added init file for 43xx ram with keil
...
keil host os none work with ngx4330 board
2014-03-05 12:34:49 +07:00
09127e4759
remove the lwipopts.h
2014-03-05 11:21:46 +07:00
e6d7c5fcee
remove lwip code in main.c & boardGetMACaddr (board.c)
...
NOTE: previous commit also removed some lwip's configure in board_ea4357
fix NGX4330 led blinking
2014-03-04 22:46:42 +07:00
2a866365e9
added support for IAR retarget but not yet succeeded. lpc17xx have problem connect with jlink
2014-03-04 16:31:44 +07:00
6f24dd50a0
change lpc17xx cmsis file & ohci to be able to build with IAR
2014-03-04 15:19:50 +07:00
93a60641ea
fix issue with SVC_Handler SVCall_Handler name between keil & xpresso start up file. Host freertos works with lpc17xx
2014-03-04 14:15:10 +07:00
c11946f318
able to build keil with lpc17xx (non os + freeRTOS)
2014-03-03 17:53:09 +07:00
9604645f24
ported freeRTOS with lpc175x_6x, all host demo work
2014-03-03 16:54:17 +07:00
22a84f744d
able to build freeRTOS with lpc175x_6x
2014-03-03 16:25:34 +07:00
037c49489c
freeRTOS host demo work with keil
2014-03-02 21:46:14 +07:00
90b7ead017
refine keyboard host demo (added new line for enter key)
2014-03-02 21:39:18 +07:00
b5ce076d8d
increase msc host app task stack size to 512 so that copy command can be executed
2014-03-02 18:11:30 +07:00
5f8f046eaa
refractor remove tusbh_msc_is_failed
...
increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device
added task for msc host freeRTOS with stack = 300 (still cannot execute copy command)
2014-02-28 18:42:33 +07:00
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
a1978e20fe
merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h
2014-02-28 15:50:04 +07:00
856be67189
keil support for lpc17xx host
2014-02-20 16:31:34 +07:00
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
a982a52ab3
refractor __n2be_16
2014-01-24 21:51:24 +07:00
275e834bbe
add device_os_none keil project for all boards
2013-12-27 13:40:59 +07:00
8de6ee22dc
move device app code
2013-12-24 16:15:18 +07:00
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
fce6252456
hub works with ohci as well. There is some problem when plug & unplug device hmm
2013-12-19 12:21:40 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
b35d2c8f43
add lpc17xx build config for host demo
2013-12-11 12:13:22 +07:00
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
9cb99d3716
house keeping
2013-11-08 19:37:26 +07:00
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
3945869cc2
refractor tusb_descriptor, adding support for cdc descriptor
2013-11-07 12:28:10 +07:00
8c9def8618
clean up tusb_descriptors
2013-11-07 11:51:39 +07:00
f1d47702e8
refractor mouse dev app
2013-11-06 20:06:28 +07:00
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
60d444b452
fix a bug with USB1, but still cannot get interrupt occurred on USB1
2013-11-06 14:53:18 +07:00
58b41a05db
refractor for device able to work on usb1 of lpc43xx. But could not get it work on EA4357
2013-11-06 14:20:45 +07:00
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
024858a605
complete msc device demo with 8KB ram disk
2013-11-05 14:55:58 +07:00
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
f797c4e02a
rename device project
2013-11-01 12:17:54 +07:00
077b6defe9
rename device project
2013-11-01 12:13:31 +07:00
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
a98bae0d19
enhance serial host app
2013-10-27 20:56:41 +07:00
1d28b2bd10
refractor cdc serial host app.
...
fix RTOS cdc_serial_app_task executing forever
2013-10-27 20:44:06 +07:00
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
86b3e3174d
refine mouse demo
2013-10-16 12:05:48 +07:00
f28d2d1189
add supported class to greeting
2013-10-15 12:39:11 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
ef83b8e10a
wrap up msc demo
2013-10-01 17:05:02 +07:00
fffd613897
enhance cd command
2013-10-01 16:36:52 +07:00
18b3179bc6
refractor msc host app examples
2013-10-01 16:11:34 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
26f75d6cac
house keeping
2013-09-26 15:35:15 +07:00
238afb474f
house keeping
2013-09-26 15:15:16 +07:00
a6726f7d39
added mkdir command
2013-09-26 15:08:49 +07:00
0268e0b787
added clear screen command
2013-09-26 15:04:02 +07:00
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
4bdede53eb
refractor cli error handling
...
add cat command
2013-09-26 11:27:48 +07:00
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
b995e25308
enable long filename
2013-09-25 20:44:18 +07:00
89898acd5d
almost complete cli for msc
2013-09-25 19:52:05 +07:00
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
cf65f859be
working on fatfs integration
...
fix retarget input for lpcxpresso
2013-09-25 11:23:53 +07:00
bd9af2d57b
added cli support
2013-09-24 21:04:56 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
hathach