75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
988edce745
fix build
2019-12-09 18:49:38 +07:00
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
4a1f7d0243
Fix mynewt osal queue definition
...
Queue table has pointers instead of data os_event structs.
This resulted in crashes when elements were put to queue and
overwritten variables that were just after mpool desiged
for queue.
2019-12-01 12:38:36 +01:00
26dcc19b18
valentyusb: eptri: don't double-advance read buffer
...
Due to an error, we were double-advancing the FIFO buffer. The end
result was that the second half of most reads were getting ignored.
This wasn't found during earlier testing because only 64-byte buffers
were tested.
This corrects this error by avoiding double-advancing the buffer.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-29 18:14:23 +08:00
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
302746d02c
Merge branch 'develop' into port-samg55
2019-11-27 12:35:59 +07:00
fe1eadf177
fix #229
2019-11-27 12:34:30 +07:00
8a1b6327ba
extract code to invoke_class_control()
...
- also rename usbd_class_drivers to _usbd_driver
2019-11-27 12:12:52 +07:00
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
ca741dfc2a
Merge pull request #220 from hathach/develop
...
Port NXP iMX RT10XX
2019-11-22 15:16:41 +07:00
6123b600fc
rename dcd_lpc18_43 to dcd_transdimension
2019-11-22 14:47:07 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
fca4653b95
able to compile dcd 18/43 with rt1064
2019-11-22 12:34:41 +07:00
2ead26a12d
more clean up
2019-11-22 12:26:40 +07:00
ccb09db3b7
more clean up
2019-11-22 12:16:47 +07:00
7e16a9a1db
more constant rename clean up
2019-11-22 12:14:55 +07:00
8aacd1eacd
refactor dcd_lpc18_43, making it capatible with rt10xx
2019-11-22 12:11:13 +07:00
623b16af2e
clean up dcd lpc18_43
...
drop supporting both device mode on both ports.
2019-11-22 00:58:18 +07:00
1f52273d99
move dcd_lpc18_43.h into .c file
2019-11-22 00:38:22 +07:00
03deeea465
fix segger host example
2019-11-22 00:33:10 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
a9282eab51
eptri: clear proper endpoint when opening IN port
...
When opening a USB port, we ensure the buffer is NULL and has
a length of 0.
Due to a mistake in specifying the endpoint type, we never actually
cleared the value when opening an IN endpoint. This patch fixes
the comparison when opening an IN endpoint.
This fixes issue #218 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-20 17:45:21 +08:00
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
c2fb813658
Merge pull request #217 from xobs/valentyusb-eptri
...
WIP: Add Valentyusb eptri
2019-11-18 12:37:34 +07:00
56abce44f3
Merge pull request #208 from hathach/fix-issue-207
...
Fix issue 207
2019-11-14 10:10:42 +07:00
cc73990530
tusb: rename `foosn` to `valentyusb`
...
Use the name `valentyusb` as the vendor for the `valentyusb`
project, rather than the manufacturer name of the Fomu device.
This is because the `valentyusb` core can be used across multiple
vendors, much like how other cores can be used across chip vendors.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
e05e9801e4
fomu: gate debug/logging features
...
This gates the majority of the debug and logging features behind
testable macros.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
3292920933
fomu: first stable working commit
...
This appears to be stable, and works well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
1882a87212
fomu: remove reference to SETUP_CTRL.ACK
...
THis bit isn't used anymore, so remove it.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
729c8d073c
fomu: dcd_fomu: add next_ev support
...
Now that we have the `USB_NEXT_EV` register, take advantage of
it to work around issue #207 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:09:38 -08:00
913032ae1d
dcd_fomu: nearly there
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
835a72c595
fomu: semi-working dcd file
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
843136d0e4
fomu: commit latest version
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
22fd7bf85e
fomu: first fully-working release
...
This is able to transfer lots of data back and forth across MSC.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
4a8475b8a7
src: add eptri to tusb
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
0559fd13fb
fomu: fix some issues with dcd_fomu
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
359189ea2d
tusb_verify: add riscv assert support
...
This simply executes an "ebreak" instruction.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
32bb68409e
portable: fomu: get msc to enumerate
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
36ede44885
fomu: wip support
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
fc86a308f6
clean up
2019-11-05 11:45:02 +07:00
5209091c28
Merge branch 'master' into fix-issue-207
2019-11-05 10:20:30 +07:00
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
3c49ff153e
Merge pull request #149 from pigrew/ZLP_Request2
...
Zlp request2
2019-11-05 00:05:21 +07:00
8d0fa158d7
Change one more TU_ASSERT to TU_VERIFY in usbd.
2019-11-04 11:33:14 -05:00
2727983a2d
fix #211
2019-11-04 22:52:29 +07:00
a94fe05ecb
usbd: Change TU_ASSERT to TU_VERIFY as the assertion can be hit when bad data is sent from host.
2019-11-04 08:59:29 -05:00
c98acd3873
Use control transfer function to send control data (in usbtmc)
2019-11-04 08:54:18 -05:00
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
44ad683bd6
fix tud_control_status() didn't update request
2019-11-04 11:21:57 +07:00
65e96e5d52
added optional dcd_control_status_complete()
2019-11-03 18:00:07 +07:00
62f8c14fae
add a bit of log1 for debugging
2019-11-03 14:08:38 +07:00
7bf01e218d
make control buf static
2019-11-03 11:43:07 +07:00
1b51b78eaf
hack the request length for the first get device descriptor if EP0 size =8 or 16
...
to prevent usbd control send out ZLP
2019-11-03 00:17:17 +07:00
a0cffdc843
Merge branch 'pigrew-ZLP_Request2' into cr1901-msp430f5529
2019-11-02 23:29:35 +07:00
79fbc0b23c
wait for scsi status complete before queueing for next scsi command
...
fix #207
2019-11-01 18:43:18 +07:00
838173efc3
remove TEST_FAIL() from TU_ASSERT, since it prevents we testing how stack response with failed assert
2019-11-01 18:27:15 +07:00
d0d87d98f6
add assert to prevent div by zero
2019-11-01 18:03:43 +07:00
5b68cc91ad
adding TEST_FAIL() for TU_ASSERT()
2019-11-01 17:50:40 +07:00
164d0db825
Merge branch 'ZLP_Request2' into pigrew-ZLP_Request2
2019-11-01 10:16:59 +07:00
981e64d8a1
implement pigrew review
2019-11-01 10:07:56 +07:00
d35f86993f
Merge remote-tracking branch 'origin/master' into ZLP_Request2
2019-10-31 12:23:54 -04:00
f58726887a
update doc, hid set report
2019-10-31 21:28:46 +07:00
cacbb80a90
zlp should work with control in, tested with Unity framework
2019-10-31 21:14:06 +07:00
6de9eb4b1a
add more tests, fix an issue with tud_descriptor_configuration_cb() return NULL
2019-10-31 13:06:57 +07:00
d9ba4d90a8
move function around, more rename
2019-10-31 12:26:36 +07:00
0029b58417
rename
2019-10-31 12:18:41 +07:00
e6857d8ee0
clean up
2019-10-31 11:25:41 +07:00
8a57997c0f
Merge branch 'master' into pigrew-ZLP_Request2
2019-10-31 09:57:52 +07:00
4d329d46cc
Merge pull request #206 from hathach/develop
...
Added a couple of unit testing with Ceedling/Cmock/Unity
2019-10-31 08:29:11 +07:00
a0002cc709
rename usbd_init() to tud_init()
2019-10-30 23:26:34 +07:00
16665672a4
initally adding test_usbd.c
2019-10-30 12:24:07 +07:00
880ac1e398
move dcd event helper to be dcd.h as inline function
2019-10-30 11:35:25 +07:00
5d585c03bd
dcd_msp430x5xx: Improve comments regarding SETUP packet handling.
2019-10-29 14:08:39 -04:00
3f0f7cfd07
dcd_msp430x5xx: Clarify hardware STALL behavior and current vs ideal
...
behavior of driver in comments.
2019-10-29 12:52:56 -04:00
66faa96f16
tusb_option.h: Assign msp430 ID range 500+ to avoid conflict with Sony.
2019-10-29 11:33:34 -04:00
a29eb87c38
Merge branch 'ZLP_Request2' of https://github.com/pigrew/tinyusb into pigrew-ZLP_Request2
2019-10-29 18:19:10 +07:00
f6a65720e5
should fix #184
...
only response up to EP0 size with get device descriptor if not
addressed.
2019-10-29 16:25:32 +07:00
de333a6f18
clean up warning, msp430 gcc 8.3 fixed the library lto issue
2019-10-29 16:21:31 +07:00
78523301bb
Merge pull request #202 from smunaut/dfu-rt
...
Add support for DFU Runtime class for devices
2019-10-28 22:56:14 +07:00
ec4ecfa817
Add support for DFU Runtime class for devices
...
This is really just a few descriptors and then answering to the
request from the host to reboot into DFU mode.
That latter part is delegated to the app since this is platform
specific.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-10-28 16:11:08 +01:00
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
6ab0663c1a
adding more log
2019-10-24 12:00:06 +07:00
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
90b6b5d137
clean up tusb_verify
2019-10-18 16:38:02 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
d0146be00b
dcd_msp430x5xx: Fix typo in copy-paste in transmit_packet.
2019-10-10 04:19:48 -04:00
c8e899fef0
dcd_msp430x5xx: Improve SETUP packet and EP0 NAK interactions, per
...
42.3.1.3 in Reference Manual; fix is incomplete but works.
2019-10-10 04:02:35 -04:00
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
0cea82568c
Disable/enable only USB interrupt
2019-10-08 09:58:56 +02:00
9923604221
Send SUSPEND and RESUME signals
2019-10-07 14:04:48 +02:00
b3872febe2
Disable/enable interrupt
2019-10-07 14:03:02 +02:00
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
a01b0a73c1
Remove accidentally-commited debug var.
2019-10-03 23:59:22 -04:00
432e9dcd2e
Merge remote-tracking branch 'pigrew/ZLP_Request2' into msp430f5529
2019-10-03 23:50:55 -04:00
13d37e4a36
lpcxpresso1549 board test running
2019-10-03 15:23:01 +07:00
7fd68efe7b
couldn't get 32L4 running with crystal less mode
2019-10-03 13:37:10 +07:00
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
b0b737b42a
usbd_control.c: Decide whether a control transfer has a data stage
...
based on setup packet wLength.
2019-10-02 23:02:55 -04:00
05914de109
dcd_msp430x5xx: Fix typos in dcd_edpt_clear_stall.
2019-10-02 22:36:45 -04:00
3edb5548e9
dcd_msp430x5xx: Ensure DBUF bit is cleared on endpoint open, as it
...
could get spuriously set in debugging sessions. cdc_msc functional.
2019-10-02 01:19:12 -04:00
cef388b7bd
Merge branch 'master' into ZLP_Request2
2019-10-02 01:15:47 -04:00
820a3705f5
Merge branch 'master' into develop
2019-10-02 12:13:47 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
1e193212d7
Add testcase for EP0 stall recovery to USBTMC test script.
2019-10-02 00:31:47 -04:00
e5f38e3e86
Remove references to EP kind.
2019-10-02 00:11:16 -04:00
838cfe02c1
Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0
2019-10-02 00:09:07 -04:00
19ee519926
dcd_msp430x5xx: Correct byte count masks in transmit/receive routines.
2019-10-02 00:01:58 -04:00
54478aaa2a
dcd_msp430x5xx: Add STALL support for nonzero endpoints.
2019-10-01 23:28:41 -04:00
fad44c03c8
dcd_msp430x5xx: Fix TOGGLE bit behavior, clear stall when endpoint
...
opened due to reset potentially not resetting everything.
2019-10-01 23:03:39 -04:00
204791b3e7
2nd attempt to fix #161
2019-10-01 22:19:04 +07:00
12609f818b
fix #161 added volatile for ep_busy_map/ep_stall_map
2019-10-01 14:43:34 +07:00
d27291f288
Merge branch 'master' into develop
2019-09-30 14:45:34 +07:00
4ea2a4ed60
Github's web interface changed line endings without asking me. Oops.
2019-09-29 10:45:13 -04:00
0078be9c24
Merge branch 'master' into ZLP_Request2
2019-09-29 09:52:53 -04:00
b623e3023e
dcd_msp430x5xx: Implement receive_packet for all endpoints, correct
...
some mistakes in transmit_packet.
2019-09-29 03:58:30 -04:00
549ad1d9b6
dcd_msp430x5xx: Fix missing mask when posting IN xfer events.
2019-09-29 03:02:59 -04:00
838b431fac
dcd_msp430x5xx: Implement transmit_packet for nonzero endpoints. Untested.
2019-09-29 02:43:05 -04:00
2247f132ca
Implement dcd_edpt_xfer for nonzero endpoints.
2019-09-29 02:22:09 -04:00
ea0e799df6
dcd_msp430x5xx: Fix clear stall logic.
2019-09-29 02:17:59 -04:00
529efcc0d2
dcd_msp430x5xx: Implement dcd_edpt_open.
2019-09-29 00:21:40 -04:00
5d9f833915
dcd_msp430x5xx: Implement STALL logic for EP 0.
2019-09-28 02:09:03 -04:00
63c94ff684
dcd_msp430x5xx: Improve EP0 IN handling (reuse short_packet field).
2019-09-28 01:51:05 -04:00
030560792d
dcd_msp430x5xx: Implement dcd_set_address.
2019-09-27 21:59:45 -04:00
3ac43076da
dcd_msp430x5xx: Implement EP0 IN xfers, clean up.
2019-09-27 21:22:19 -04:00
c4483d244b
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 21:22:19 -04:00
4ccdc5522d
Fix typo of CFG_TUD_ENDOINT0_SIZE.
2019-09-27 12:41:46 -04:00
91fa24d99c
Merge branch 'master' into ZLP_Request2
2019-09-27 00:37:21 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
f19082f02d
Reset TX and RX endpoints to NAK when receiving setup packet.
2019-09-25 20:55:15 -04:00
048e0448c0
ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar.
2019-09-25 20:54:59 -04:00
6841b236e8
Remove _app from callback function names.
2019-09-25 12:47:05 -04:00
3a87dd65d7
Change getting the capabilities structure to a callback instead of an extern struct.
2019-09-25 12:46:35 -04:00
2d4352bfe9
Rename USBTMC functions.
2019-09-25 12:46:25 -04:00
412a279073
I never understood why I need to write void as empty function arguments.
2019-09-24 13:54:45 -04:00
624f4bf4ce
Remove rhport from app code. If anything, it should be the interface_id. Assume a single interface, for now.
2019-09-24 13:42:29 -04:00
10105557dc
Let application control interface latency...
2019-09-24 13:11:45 -04:00
01b4115b0b
dcd_msp430x5xx: Fix Setup packet delay by actually enabling
...
corresponding interrupt.
2019-09-24 04:06:34 -04:00
550e8215f3
dcd_msp430x5xx: Setup packets are now received successfully (with delay).
2019-09-24 03:43:51 -04:00
d2e4af5a7b
msp430f5529: Change EP0 size to 8, implement interrupt logic up to bus
...
reset detection.
2019-09-24 02:41:11 -04:00
950614a841
msp430f5529: Implement dcd_int_enable/disable.
2019-09-23 22:58:49 -04:00
a6a79df9fb
msp430f5529: Enable clocks/PLL for msp_exp430f5529lp and enable USB
...
module in dcd_msp430x5xx; device does not enumerate.
2019-09-23 18:53:31 -04:00
907bc3df9b
msp430f5529: Ensure cdc_msc demo compiles.
2019-09-23 17:48:18 -04:00
e61f2b7393
Retool stalling EP on xfer errors.
2019-09-22 09:55:28 -04:00
757c2cdc5b
Merge remote-tracking branch 'origin/master' into usbtmc
2019-09-22 09:30:45 -04:00
7ba8e81852
Merge pull request #177 from cr1901/fifo-fix
...
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-22 11:38:54 +07:00
108f756e22
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-21 23:01:06 -04:00
fa5b5e4561
Lots of updates (especially error handling)
2019-09-21 21:46:46 -04:00
2aa10daf26
Merge branch 'clear_feature_ordering' into usbtmc
2019-09-21 21:39:25 -04:00
ec3414ca3a
Merge branch 'master' into usbtmc
2019-09-21 21:38:05 -04:00
9498adef71
Changing the bitwise to a logical OR created a huge hard to find bug. It shortcutted the call to the class function,
...
so, lets use shortcutting anyway?
2019-09-21 19:29:57 -04:00
fbb8520acd
logical or.
2019-09-21 14:34:29 -04:00
37b52e354f
Correct wording of comment on handling EP requests.
2019-09-21 12:17:17 -04:00
a187f0268c
When unstalling, EP must be marked as not busy. Also, mark EP as busy when stalling as xfer requests should fail.
2019-09-21 12:05:57 -04:00
be28a05409
Make type casting explicit
2019-09-21 12:05:46 -04:00
55abb3d717
Calling EP open with bad parameters should be considered a bug.
2019-09-21 12:02:52 -04:00
aebecf169a
Reorder handling of EP control requests,
2019-09-21 12:02:06 -04:00
b6590490a8
USB Control: Pointer arithmetic on void* is forbiden
2019-09-21 12:00:52 -04:00
ce9f133d25
FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos.
2019-09-21 12:00:04 -04:00
f90f1a278b
Merge pull request #169 from pigrew/hid_desc
...
Implement HID desc request.
2019-09-21 00:06:51 +07:00
8a688cd8d0
Revert "Revert "Also need to just return false in the case that it isn't an interface control event. We shouldn't assert. This normally isn't an""
...
This reverts commit 2281a51484
2019-09-20 12:58:26 -04:00
2281a51484
Revert "Also need to just return false in the case that it isn't an interface control event. We shouldn't assert. This normally isn't an"
...
This reverts commit f241ff389f
2019-09-20 12:27:41 -04:00
f241ff389f
Also need to just return false in the case that it isn't an interface control event. We shouldn't assert. This normally isn't an
...
error, either, so I don't want to use TU_VERIFY.
2019-09-20 08:56:46 -04:00
a8a65d6cea
Use cached HID descriptor.
2019-09-20 08:46:17 -04:00
345806a533
Merge remote-tracking branch 'origin/master' into usbtmc
2019-09-20 08:42:20 -04:00
94c9cf0eff
doc update
2019-09-20 16:14:35 +07:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
02b468f56a
(little typo fix)
2019-09-19 21:20:04 -04:00
05164c5a27
Cache pointer to HID descriptor.
2019-09-19 21:04:51 -04:00
2a7ca15e2c
Rename functions to include tud_ and _cb
2019-09-19 20:43:49 -04:00
f3d6d0127b
Rename USBTMC_CFG_ENABLE_488, and fix build with it off.
2019-09-19 19:59:44 -04:00
d742c3e15c
s/USBTMC488/USB488/ ; fix types in bitfield
2019-09-19 19:56:00 -04:00
7e0490bbf3
Move descriptors to usbd.h
2019-09-19 19:51:37 -04:00
346443118f
Add testcase for aborting bulk in with no data queued (and fix aborting bulk in)
2019-09-19 19:01:08 -04:00
0548f97d33
Remove debug printf.
2019-09-19 18:59:57 -04:00
525b4cdb72
Use ESOF for wakeup timing.
2019-09-19 09:51:40 -04:00
642afeea8b
s/static const/define/
2019-09-19 09:30:16 -04:00
85623584f9
Remove debug assertions.
2019-09-19 09:24:52 -04:00
5fcc1468eb
Merge branch 'master' into fsdev_smallPacket
2019-09-19 09:16:48 -04:00
d4b2dff7c4
Fix more TX bugs... and add variable response delay to the example project.
2019-09-19 00:00:27 -04:00
9a726dc7ed
More fixes, and a bit of SRQ.
2019-09-18 21:34:26 -04:00
99d03fcaee
small fixes
2019-09-18 19:30:44 -04:00
eea71a8b3b
usbtmc updates....
2019-09-18 19:24:54 -04:00
6dd2296cfc
Change inline functions to macros, and make all parameter names uniform.
2019-09-17 13:29:42 -04:00
237c32b976
fix #143
2019-09-17 13:29:42 -04:00
5a2e510af7
Interpretation of assert vs verify.
2019-09-17 13:29:41 -04:00
8e17fb4910
follow up to suggestion to pr 155
2019-09-17 13:29:41 -04:00
1ceeab2702
This demonstrates that I don't pre-build things before committing them... oops.
2019-09-17 13:29:40 -04:00
8d05b70a72
Off-by-one error in Synopsys assertions. (and move some braces to their own lines.
2019-09-17 13:29:40 -04:00
41e8b8752e
Massive copy&paste typo of mine in the 32-bit byte swapping function....
2019-09-17 13:29:40 -04:00
a0b6b8187c
TI compiler quirks, and le byte swapping functions.
2019-09-17 13:29:40 -04:00
91cd247c97
changes 2
2019-09-17 13:29:39 -04:00
45871001e6
Changes1...
2019-09-17 13:29:38 -04:00
e234998c6c
More proper handling of clear.
2019-09-17 13:29:38 -04:00
c755aee7d0
Clear
2019-09-17 13:29:38 -04:00
915f52730d
Implement HID desc request.
2019-09-17 11:28:29 -04:00
89ffe78f84
ST FSDEV: No need to always reset the interrupt priority, also add some synchronization primitives after disabling interrupts.
2019-09-16 22:56:17 -04:00
a33a854793
Include board header file... :X
2019-09-16 20:56:57 -04:00
d341337c6a
Implement remote wakeup + perhaps better sleep?
2019-09-16 20:25:50 -04:00
dfe92542e6
Change inline functions to macros, and make all parameter names uniform.
2019-09-16 11:27:05 -04:00
889c17a442
Merge branch 'master' into TI_compiler_quirks
2019-09-16 09:24:27 -04:00
6b9783cead
s/unsigned int/uint32_t/
2019-09-16 09:20:15 -04:00
0c70948d0d
Merge pull request #163 from hathach/develop
...
fix #143
2019-09-16 16:37:27 +07:00
a37d2d64be
fix #143
2019-09-16 13:32:47 +07:00
88dd83ae5c
Merge pull request #159 from pigrew/assert_documentation
...
Documentation: assert vs verify.
2019-09-16 11:29:39 +07:00
19e7b7d85c
Merge pull request #155 from hathach/develop
...
fix #154 forward all endpoint recipeint request to class driver
2019-09-16 11:27:52 +07:00
9c5ae0369b
follow up to suggestion to pr 155
2019-09-16 11:13:17 +07:00
05c13342a3
Implement EP with size <64.
2019-09-15 23:51:42 -04:00
18303e742e
Covert macros to inline functions.
2019-09-15 23:46:03 -04:00
ae873a709e
Wrote TX instead of RX.
2019-09-15 23:33:36 -04:00
9593463367
Massive copy&paste typo of mine in the 32-bit byte swapping function....
2019-09-15 15:20:01 -04:00
e53e9bd4f0
Simulate query delay; getting to a point where implementing clear/aborts makes
...
sense. Probably adding too many concurance issues; need to figure out
semaphores.
2019-09-14 21:26:43 -04:00
64bfec79b2
Change requset type parameter back to uint8_t (fix type cast), support USB indicator pulse
2019-09-14 18:11:07 -04:00
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
6e00886ffb
Handle USBTMC TermChar.
2019-09-14 17:15:34 -04:00
e74c6b0874
Combined status response enum (std with 488), support trigger.
2019-09-14 16:51:02 -04:00
1cae96951f
Add usbtmc class driver.
2019-09-14 13:35:08 -04:00
21ba37aec6
Interpretation of assert vs verify.
2019-09-14 11:25:40 -04:00
4ea212a432
This demonstrates that I don't pre-build things before committing them... oops.
2019-09-13 23:52:43 -04:00
c831311a12
Off-by-one error in Synopsys assertions. (and move some braces to their own lines.
2019-09-13 23:38:58 -04:00
bb7f581b6d
TI compiler quirks, and le byte swapping functions.
2019-09-13 20:28:26 -04:00
ac8c343fef
fix #154 forward all endpoint recipeint request to class driver
...
fix typo
remove magic number 0xff of driver id
2019-09-13 22:16:24 +07:00
064adebbd0
fix #152 , potential memory issue
2019-09-13 14:03:59 +07:00
c3598f0301
fix #139 , correct usbd request intepreting, Non-STD request to Interface must be forward to class driver
2019-09-13 13:03:11 +07:00
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
8cca287683
Add verification that there is enough buffer space for HID OUT control transfer.
2019-09-12 16:07:12 -04:00
340dcb81bf
For control transfers, compare the transmitted length against the requested length to know if a ZLP needs to happen. ( fixes #139 )
2019-09-12 16:06:45 -04:00
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
d3507b0787
Merge remote-tracking branch 'origin/master' into stfsdev_cleanups
2019-09-11 20:36:48 -04:00
3326b9d008
Use types with explicit bit widths.
2019-09-11 20:33:47 -04:00
7f166d860d
stm32f7 work with dcd synopsis
...
close #124
2019-09-11 22:48:07 +07:00
7b93177890
Use TU_VERIFY_STATIC, use more uint instead of uint8_t/uint16_t. Create reg16_clear_bits function to reduce typec conversion warnings.
2019-09-11 09:45:48 -04:00
784dc52b62
Update header comments.
2019-09-11 09:44:25 -04:00
4cf2b30759
Fix bug where the EPREGs were not being initialized as expected.
2019-09-11 09:43:57 -04:00
a3f1c269e9
added stm32f767nucleo board, board_test works
2019-09-11 18:02:27 +07:00
bf76a1e49e
Merge pull request #136 from hathach/develop
...
fix #132
2019-09-11 11:16:47 +07:00
6c6a597465
fix #132
2019-09-11 10:47:07 +07:00
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
23d39f2b15
Remove OPT_MCU_STM for L and G series.
2019-09-10 12:13:36 -04:00
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
49c58be4ce
Fix silly typo in the F3xx support.
2019-09-10 01:31:14 -04:00
bc2a65b20b
A few bug fixes, remove the unstested device notices, note supported boards in READMEs, and implement PMA
...
access stride (used on MCU's with 512 byte USB buffers).
2019-09-10 01:03:24 -04:00
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
5ec59c2a30
Add STM32 FSDEV driver.
2019-09-09 14:55:39 -04:00
75a3f791e3
Remove some type conversion warnings (using GCC pedantic warnings)
2019-09-09 13:35:41 -04:00
4517d504b8
Fix typo of ENDOINT
2019-09-09 13:34:30 -04:00
b4c8a09f20
Remove STM32 F3 port.
2019-09-09 13:29:26 -04:00
96bead4b2a
Add dummy arguments to GET_NTH_ARG to make GCC happy (removes pedantic warnings)
2019-09-09 13:24:08 -04:00
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
82cd4b5350
dcd_stm32f4: Merge relevant changes from dcd_stm32h7.
2019-09-09 10:27:46 -04:00
3efc81b285
dcd_stm32h7: Merge relevant changes from dcd_stm32f4. USB2 -> USB works as alias.
2019-09-09 10:14:20 -04:00
e123cad7bb
enhance dcd stm32f4 to support max 4 or 6 endpoints on 407 or 412
2019-09-08 23:10:51 +07:00
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
56f1ccd68a
fix #97
2019-09-05 21:59:19 +07:00
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
8f8ca77a91
stm32h7: Mark USB FIFOs as volatile, otherwise optimizations will remove
...
reads/writes to the FIFOs.
2019-09-04 01:06:07 -04:00
910fd867c7
stm32h7: Fix indentation error where OUT XFER interrupt wasn't handled
...
in the correct scope.
2019-09-03 01:37:44 -04:00
1a3dc9cba1
stm32h7: USB_OTG_FS -> USB2_OTG_FS.
2019-09-03 01:28:41 -04:00
f703a74daa
stm32h7: Implement STALL logic for endpoints.
2019-09-03 01:28:41 -04:00
28b131ea94
stm32h7: Implement dcd_edpt_open. cdc_msc_hid demo functional.
2019-09-03 00:37:50 -04:00
d4302dacc5
stm32h7: Fix accidental overwrite of STUPCNT field in DOEPTSIZ register.
2019-09-03 00:25:21 -04:00
9210167603
stm32h7: Implement dcd_set_address.
2019-09-02 21:00:30 -04:00
0d0b802ee0
stm32h7: Implement IN and OUT receive for EP0; device descriptor returned.
2019-09-02 19:32:11 -04:00
f602534536
stm32h7: Implement setup packet events.
2019-09-02 13:34:33 -04:00
ee57113981
trying to add LPC55xx support
2019-09-02 15:53:12 +07:00
80cde5b0b5
fix potential bug with mis-align issue
2019-09-01 17:20:10 +07:00
074681da8b
dma of lpc54114 can also execute up to 64 bytes each transfer
...
There is still issue with cdc_msc_hid example
2019-09-01 17:05:34 +07:00
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
403662a1d6
board_test run with lpc54114
2019-09-01 15:58:42 +07:00
957201fc58
fix undef __ARM_ARCH_6M__
2019-09-01 11:59:50 +07:00
2d041aaa1d
clean up
2019-09-01 08:11:22 +07:00
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
b7dbc98ab1
close #105 add tud_vendor_write_available()
2019-08-31 16:31:07 +07:00
8b165e1024
stm32h7: Ensure FS (and the only) PHY is selected for OTG_HS2.
2019-08-30 22:07:35 -04:00
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
b3acce17cc
adding lpc51u68 support
2019-08-24 00:52:46 +07:00
48c7b80c57
fix warnings of template descriptor
2019-08-23 13:33:40 +07:00
00c440cb26
Merge pull request #99 from jepler/issue98-midi-program-change
...
midi_device: Send message classes C and D as 2 bytes
2019-08-15 23:34:42 -07:00
96d96a94b8
midi_device: Send message classes C and D as 2 bytes
...
.. sending these as two 1-byte messages with CIN of 0xF is
misinterpreted by OSes including Windows 10 and (reportedly)
Mac.
Testing performed: Ran the reproducer script, which sends Program
Change (0xCx) messages. I did not check with Change Pressure (0xDx)
messages, but expect the same thing.
Closes : #98
2019-08-14 19:15:29 -05:00
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
30de17a830
clean up
...
- remove TUD_WEBUSB_URL_DESCRIPTOR to avoid flexible array member (C++
forbid in strict mode)
- remove unused TUD_DESC_STRLEN/TUD_DESC_STR_HEADER/TUD_DESC_STR_HEADER
2019-08-01 13:20:00 +07:00
bd08d0edc9
add vendor peek, change cdc peek signature, change cdc read_char() return from signed char to int32_t
2019-08-01 10:46:27 +07:00
2c2db31b09
clean up
2019-07-30 20:28:39 +07:00
00a9e492cd
clean up
2019-07-30 00:48:31 +07:00
af3c301ea5
added BOS MS OS 2.0 descriptor to webusb example, it work with windows
2019-07-30 00:34:25 +07:00
cdaf455461
fix stall response with SET_INTERFACE/GET_INTERFACE
...
webusb work with linux & macos
2019-07-26 20:14:56 +07:00
d2b60b6755
webusb work great with linux
2019-07-26 11:36:30 +07:00
8ba71be6ee
more webusb + vendor
2019-07-25 16:52:20 +07:00
caf2b6d463
move tud_vendor_control_* to usbd.h
2019-07-24 23:12:31 +07:00
2a543c0e79
update vendor device similar to cdc read/write
...
maybe refactor later
2019-07-24 23:07:30 +07:00
56b656c768
Merge branch 'master' into develop
2019-07-24 17:08:19 +07:00
1ee9ef4f2b
change tud_msc_start_stop_cb() to return void -> bool
2019-07-24 16:19:12 +07:00
8ba78ee012
adding vendor
2019-07-24 16:08:43 +07:00
c63f2b30cb
rename tud_control_vendor_request_cb/complete_cb to tud_vendor_control_request_cb/complete_cb
2019-07-24 09:45:32 +07:00
8fad8fb5c2
Merge branch 'master' into develop
2019-07-22 19:23:48 +07:00
33de35504a
more house keeping
2019-07-19 20:20:13 +07:00
ae5dc435cb
house keeping
2019-07-19 16:49:04 +07:00
a3cb2dda9e
rename custom/custom-_* to vendor/vendor_*
2019-07-19 16:37:28 +07:00
6a076d8aae
rename CFG_TUSB_HOST_CUSTOM_CLASS to CFG_TUH_VENDOR
2019-07-19 16:31:51 +07:00
b0678e1050
rename CFG_TUD_CUSTOM_CLASS to CFG_TUD_VENDOR
2019-07-19 16:23:56 +07:00
ed6fa460e9
stm32 minor change
2019-07-19 10:59:35 +07:00
83f7aacbb1
clean up
2019-07-16 18:43:06 +07:00
036e858543
add tud_control_vendor_request_cb()/tud_control_vendor_complete_cb(), expose usbd control transfer
...
rename usbd_control_transfer/status to tud_control_transfer/status
2019-07-16 18:14:47 +07:00
cb4e6837e9
clean up, rename internal driver control_request_complete to simply control_complete
2019-07-12 22:03:40 +07:00
2b7acd554a
updating webusb with cdc
2019-07-12 19:38:04 +07:00
164b26ee6b
change TUD_HID_INOUT_DESCRIPTOR epout & epin order
...
clean up, adding template for BOS & BOS platform descriptor
2019-07-12 14:53:11 +07:00
3b6013e78f
clean up
2019-07-12 14:43:01 +07:00
e74aa41552
added tud_descriptor_bos_cb(), add support for BOS get descriptor
2019-07-12 00:12:14 +07:00
5ebb606ecd
add BOS descriptor and device capability constant
2019-07-11 22:35:17 +07:00
f554a50507
release as 0.5.0
2019-07-10 23:54:11 +07:00
64e9c11b41
fix incorrect midi descriptor template
2019-07-09 10:40:14 +07:00
216ccc6e93
midi only use audio 1.0 without IAD
2019-07-05 16:46:11 +07:00
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
1b242cb3c6
clean up
2019-07-04 01:31:56 +07:00
b0e5a1a9ec
remove tud_midi_write_flush() send asap. rename tud_midi_connected() to tud_midi_mounted()
2019-07-04 01:27:51 +07:00
50f4c61d7c
fix midi_write prototype
2019-07-03 01:22:41 +07:00
1a0e02fa1b
tested midi example
2019-07-03 00:52:25 +07:00
62d3b91691
clean up
2019-07-02 18:23:42 +07:00
3f3ef6f4e6
clean up
2019-07-02 16:42:12 +07:00
57433135ce
fix midi template
2019-07-01 23:19:14 +07:00
e702328093
fix compiling
2019-07-01 23:11:16 +07:00
6991b28532
improving midi support, adding midi exmaple
...
rename TUSB_DESC_CLASS_SPECIFIC to TUSB_DESC_CS_INTERFACE
2019-07-01 22:38:06 +07:00
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
7156bfb54d
fix build error with midi, use usbd_edpt_xfer/busy for midi to replace dcd_*
2019-06-10 18:46:00 +07:00
dcfaec9efc
add HID_ASCII_TO_KEYCODE
2019-06-06 18:06:24 +07:00
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
a0307bafda
added usbd_edpt_xfer/usbd_edpt_busy to replace dcd_edpt_transfer/dcd_edpt_busy()
...
- improve fifo write/read_n with only one lock
- use usbd_edpt_xfer/usbd_edpt_busy for hid/cdc/msc class driver
- replace cdc read's pending_read_from_host by usbd_edpt_busy()
2019-05-29 16:55:15 +07:00
5f34c63660
should fix and work with #58
...
- add hid_test_js
2019-05-24 12:33:56 +07:00
f4762ff012
host fix address alloc when it reach max devices
2019-05-23 10:59:43 +07:00
3846645a28
fix tud_cdc_read_char()/tud_cdc_peek() to return signed char
...
- depending on compiler option "char" can be intepreted as unsigned char
2019-05-22 00:54:21 +07:00
bcf9718f9a
clean up
2019-05-15 22:51:49 +07:00
8ccecde18e
lpc1769 work with makefile
2019-05-15 12:57:31 +07:00
6e443d1918
enable CFG_TUSB_DEBUG on DEBUG build
2019-05-14 17:36:03 +07:00
910a94e9ca
clean up
2019-05-14 13:12:16 +07:00
454496316f
more endian convert
2019-05-14 13:06:38 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
81fc7b7e2b
clean up endian convert function
2019-05-14 12:14:51 +07:00
3e24daac79
remove deprecated tusb_task, clean up tusb compiler
2019-05-14 12:03:06 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
6135019230
clean up
2019-05-14 11:46:22 +07:00
f3a5ea65a9
add index to tud_descriptor_configuration_cb()
2019-05-12 19:55:15 +07:00
1174949308
change tud_descriptor_string_cb() to be consistent with other descriptor callback
2019-05-12 15:38:15 +07:00
ba2136486c
add tud_hid_descriptor_report_cb()
...
- remove tud_desc_set.hid_report
- remove tud_desc_set_t
2019-05-12 14:09:35 +07:00
de56a0ca89
add tud_descriptor_string_cb() for getting string descriptor from application
...
- remove tud_desc_set.string_arr/string_count
2019-05-11 16:31:52 +07:00
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
7063a0dd03
msc device will stall READ_CAPACITY & READ_FORMAT_CAPACITY if tud_msc_capacity_cb() get zero size
2019-05-09 23:33:55 +07:00
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
81cb1c9510
clean up
2019-05-07 00:03:42 +07:00
6e4dc2f23d
adding msc Start Stop to buitin command, but not complate yet
...
add tud_msc_start_stop_cb() as optional callback
2019-05-06 16:48:50 +07:00
efefbd3a4e
add Test Unit Ready to builtin command, add tud_msc_test_unit_ready_cb()
...
- rename tud_msc_maxlun_cb to tud_msc_get_maxlun_cb
2019-05-06 15:01:38 +07:00
fae9aba68f
add tud_msc_inquiry_cb() remove CFG_TUD_MSC_VENDOR/PRODUCT/PRODUCT_REV
2019-05-03 23:46:01 +07:00
f9d9eebfe1
support hid generic inout #58
...
- add report descriptor template TUD_HID_REPORT_DESC_GENERIC_INOUT
- add TUD_HID_INOUT_DESCRIPTOR & TUD_HID_INOUT_DESC_LEN
- add hid_generic_inout example
2019-05-02 14:30:49 +07:00
3387b9fca5
use tud_hid_set_report_cb for hid epout
2019-05-02 13:27:32 +07:00
353d415d3f
clean up
2019-05-02 13:27:00 +07:00
1c0ec61aa1
add tud_hid_out_report_cb() for hid epout
2019-05-02 00:08:39 +07:00
a25ca701cd
text clean up
2019-05-01 23:26:52 +07:00
c8b9293d68
rename hid report_buf to epin_buf
...
add epout_buf and use it for SET_REPORT request buffer
2019-05-01 20:45:05 +07:00
2050778763
clean up
2019-05-01 20:41:26 +07:00
c006f3dbce
adding optional ep out for hid
...
refactor usbd_open_edpt_pair
2019-05-01 19:29:56 +07:00
90fdae94f8
clean up
2019-05-01 18:21:08 +07:00
9fa5c8025f
clean up
2019-05-01 17:07:33 +07:00
84f81f6b21
simplify hid keyboard & mouse report to one API each
2019-05-01 17:06:18 +07:00
0b6999a28e
add tud_hid_set_idle_cb
...
- rename tud_hid_mode_changed_cb to tud_hid_mode_changed_cb
- add mouse ac pan descriptor template support
2019-05-01 16:53:35 +07:00
0ef7edb446
osal clean up
2019-05-01 01:46:39 +07:00
89ace295ba
add TUD_ to HID_REPORT_DESC_* template
2019-04-28 00:43:36 +07:00
b74eca4f12
add msc multiple lun support
...
- remove CFG_TUD_MSC_MAXLUN
- add tud_msc_maxlun_cb()
- add msc_dual_lun exmaple
2019-04-26 15:54:42 +07:00
67aa45f75f
remove CFG_TUD_HID_ASCII_TO_KEYCODE_LOOKUP
2019-04-25 21:41:21 +07:00
ff8fe28c98
move interface descriptor template to usbd.h, update exmaple
2019-04-19 13:16:06 +07:00
23bcf1cc7a
remove auto descriptor and its option CFG_TUD_DESC_AUTO
2019-04-18 23:59:21 +07:00
307ba23046
wrap up hid device refactor
2019-04-18 22:31:35 +07:00
a30461b078
update tud_hid_keyboard/mouse helper
2019-04-18 13:27:06 +07:00
8d2db4dd70
add tud_hid_mode_changed_cb()
2019-04-18 12:32:19 +07:00
1ffcadd373
hid update
2019-04-18 11:52:23 +07:00
cc2fce31e5
refactor hid, rename hid_generic to simply hid_
2019-04-18 00:36:17 +07:00
516964b3d3
add interface descriptor template
2019-04-17 13:43:07 +07:00
72575534f8
remove auto device descriptor
...
Application should declare its own device descriptor
2019-04-11 00:51:28 +07:00
6102183193
clean up
2019-04-11 00:22:18 +07:00
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
6564580c3d
clean up
2019-04-02 16:23:13 +07:00
4af16efea7
add tud_ready() to hid_ready()
2019-04-02 02:14:39 +07:00
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
491b5936d5
usbd better support suspend/resume
2019-04-02 01:30:01 +07:00
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
f3a954e7de
self powered and remote wakeup support are from configuration descriptor attribute
2019-03-30 17:38:00 +07:00
ee6ed084f4
clean up text
2019-03-30 15:03:48 +07:00
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
cabf6abb4f
added tud_set_self_powered(), fix #50 reponse to GET_STATUS request
2019-03-30 14:34:38 +07:00
d9682f8240
replaced config_num by configured
2019-03-30 13:48:15 +07:00
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
28610198df
clean up
2019-03-29 17:42:10 +07:00
7d9b68a7b9
clean up control req a bit
2019-03-29 16:55:58 +07:00
3a38cde53d
support set/clear feature Device_remote_wakeup
2019-03-29 16:37:08 +07:00
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
8fb9fbb0b1
add tud_mounted() check in tud_cdc_connected()
...
mark device as disconnected immed with DCD_EVENT_UNPLUGGED
2019-03-27 23:58:24 +07:00
c09d754654
remove tud_msc_ready()
2019-03-27 23:47:59 +07:00
801f3c9d8d
more clean up
2019-03-27 21:00:15 +07:00
da452d4ba6
cleanup, remove the use of _TINY_USB_SOURCE_FILE_
2019-03-27 17:48:42 +07:00
f26fbaf404
clean up remove usbd_control_stall()
2019-03-27 16:26:52 +07:00
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
852abba918
Merge branch 'master' into develop
2019-03-27 00:46:32 +07:00
89b9ee2f52
revert to use pending_read_from_host (temp) since
2019-03-27 00:39:14 +07:00
aaf5714268
follow up to pr #46
2019-03-25 11:38:16 +07:00
fad8720215
Merge pull request #46 from tannewt/fix_cdc_out
...
Fix slow CDC OUT by NAKing
2019-03-24 03:27:58 -07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
d866999bf0
remove idle rate enforcement, should be done in application level
2019-03-23 21:46:51 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
909891325a
Fix slow CDC OUT by NAKing
...
This NAKs CDC OUT packets when the ring buffer doesn't have
enough space for it. This makes CDC OUT reliable rather than
allowing overwriting into the ring buffer.
2019-03-21 14:52:56 -07:00
3574688d26
more with mynewt
2019-03-21 00:54:42 +07:00
a1a6220ac8
update osal for mynewt
2019-03-21 00:36:52 +07:00
87962a222d
clean up
2019-03-20 23:12:12 +07:00
da55610f43
clean up
2019-03-20 20:19:21 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
4647ad8136
clean up
2019-03-20 14:41:35 +07:00
hathach