3cc2227810
Partially revert "skip uac2_headset for mcu that does not have enough sram"
...
This reverts commit 6e1f812e35
2021-07-04 15:46:12 +02:00
5f67e5c1e9
Clear FIFO only if enabled...
...
Add buffer align
2021-07-04 15:46:11 +02:00
8d1a88cab6
skip uac2_headset for mcu that does not have enough sram
2021-07-04 15:46:11 +02:00
5b7795be4b
Add 24bit loopback in example.
2021-07-04 15:46:11 +02:00
a1639b0279
Refactor descriptor, add alt settings support.
2021-07-04 15:46:11 +02:00
325742acb4
Fix typo
2021-07-04 15:46:11 +02:00
6e9da70c18
Fix audiod_get_AS_interface_index in audio class.
...
Enhance uac2_headset example with multiple sample rates.
Add macro to calculate EP size.
2021-07-04 15:46:10 +02:00
6de023d54b
update hid_composite freertos with capslock as well
2021-07-01 22:54:57 +07:00
ca98996e1f
better support for hid device set/get protocol
...
add caplock detection for hid_composite
2021-07-01 22:46:39 +07:00
36d2214e39
fix warnings
2021-06-29 00:14:01 +07:00
efc12ae7d4
fix SET_PROTOCOl, update hid host behavior for default boot interface
2021-06-28 23:57:57 +07:00
6e939de9d6
Merge pull request #891 from hathach/host-rp2040-double-buffer
...
RP2040 double buffer
2021-06-28 17:39:09 +07:00
b2feae15e4
Merge pull request #927 from hathach/add-rx65n-board
...
Add rx65n board
2021-06-28 13:53:42 +07:00
17137bbfff
fix rx65n with freertos build
2021-06-28 12:35:12 +07:00
264dc35b95
Fix typo in TUH configuration define
2021-06-21 05:32:43 +02:00
82618d2d5f
fix build with mm32 board
2021-06-18 17:18:11 +07:00
ca8e8041ef
Fix resume, always init FS clock.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-15 17:53:09 +02:00
e4da606164
set TOP to build with esp32sx
2021-06-12 23:02:41 +07:00
85fc423569
Rename SAM7X to SAMX7X
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 12:36:59 +02:00
a4ad064e63
increase example CFG_TUH_HID from 2 to 4
2021-06-12 14:20:09 +07:00
0066e2b344
examples: freertos: add skip for same70
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:18:26 +01:00
776a770947
dcd: sam7x: rename family dcd to include the whole family
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:09:24 +01:00
c291deccfa
Add fifo & DMA linked list mode support.
2021-06-11 12:17:11 +02:00
f8aa4b3ff3
Add sketchy SAME70 DCD driver.
2021-06-11 12:17:10 +02:00
572d986a02
improve usbh
2021-06-11 17:14:22 +07:00
fd7b18a4f6
Make examples standalone buildable via CMake
2021-06-10 10:11:20 -05:00
c9d66dcd5f
remove BOARD from output name
2021-06-10 17:24:36 +07:00
fea5cbaf74
fixed net_lwip_webserver cmake build
2021-06-02 12:37:12 -05:00
bef33d108a
move core definition of source file includes from SDK into family.cmake
...
only build webserver example if lwip submodule initialized
2021-06-02 09:33:23 -05:00
5d161b79bb
Fix up build_family style builds:
...
- added back pre-existing board directories which now just select PICO_BOARD
- added boards/pico_sdk which just uses the pre-existing PICO_BOARD setting
- fixed rp2040/family.cmake to include the magic string "CFG_TUSB_MCU=OPT_MCU_RP2040" expected by build_family.py
2021-05-31 10:06:12 -05:00
95f2478146
Rework rp2040 examples and CMake build:
...
- Examples should be CMake buildable from their own subdirectory; such a build will error out based on
matching .skip.MCU_xxx or a mismatched .only.MCU_
- It should be possible to build from a higher level and use .skip.MCU_ and .only.MCU_ to filter which
examples get built
- The intention is for the CMakeLists.txts in the examples to be non family specific and without MCU based IFs. I have
started this work, but am not really sure the state of the esp32 stuff; in any case the plan is to have
everything encapsulated in the FAMILY/family.cmake
- pico_examples now just includes examples/device/CMakeLists.txt and examples/host/CMakeLists.txt directly, as they
also build correctly when included from there.
Note that .skip.MCU_ for esp32 in the directories it wasn't previously avaiable has not been added, as the .skip is common to the regular Makefile builds also. It isn't clear whether these examples should build for esp32, but if not .skip should be added.
2021-05-30 20:13:47 -05:00
edbccb5e19
don't override CFG_TUSB_OS in cdc_dual_ports example
2021-05-30 18:38:01 -05:00
f9c542aa52
fix dfu example build
2021-05-26 18:16:56 +07:00
dbef50f8ff
Merge branch 'master' into xmos-jmccarthy-master
2021-05-26 17:32:49 +07:00
220f441048
Merge pull request #850 from hathach/fix-warnings
...
fix warnings
2021-05-26 17:26:50 +07:00
aca2320075
fix uac2_headset example
...
tud_audio_rx_done_cb() is departed, replace with
tud_audio_rx_done_pre_read_cb()
2021-05-26 11:45:45 +08:00
954056da0c
fix warnings cast function type for nrf, fix pico osal warning
...
add TODO for overflow in tusb_fifo.c
2021-05-25 21:02:40 +07:00
ce59d69520
Merge remote-tracking branch 'official/master'
2021-05-25 09:27:35 -04:00
56577d9fca
Merge pull request #834 from hathach/host-hid
...
Rework Host hid
2021-05-22 22:56:17 +07:00
a2c4a48dd6
add tuh_hid_report_sent_cb()
2021-05-22 22:03:21 +07:00
b8e019da32
rename tuh_hid_get_report_cb to tuh_hid_report_received_cb()
2021-05-22 21:51:30 +07:00
df65c35b31
implement hid host set report with control transfer
...
rename mount, umount callback
2021-05-22 21:48:42 +07:00
63c57ed1a4
clean p
2021-05-22 20:55:42 +07:00
ad845db6a5
improve hid parser
2021-05-22 20:54:59 +07:00
350dfb2ea3
more hid api rename
2021-05-22 18:17:32 +07:00
89dad1ad41
update app
2021-05-22 16:48:07 +07:00
99add05aa7
simplify hid api
...
add hid set_protocol() and set_protocol_complete_cb()
2021-05-22 16:27:28 +07:00
0b1257266b
fix uac2_headset example: type of bRequest should be uint8_t, not enumerate
2021-05-20 17:45:15 +08:00
327336e921
fix build for rp2040
2021-05-19 11:16:26 +07:00
40cd3a7e20
Merge branch 'master' into host-hid
2021-05-18 13:08:30 +07:00
ffdcf9a0d0
move report_info to application
...
update API accordingly, update hid parser for usage, and usage_page.
2021-05-18 12:58:24 +07:00
93661042d9
more API update
...
- remove tuh_n_hid_n_get_report()
- usbh auto queue get report and invoke callback when received data
2021-05-18 12:58:24 +07:00
dfa8b41b96
adding hid parser
2021-05-18 12:58:24 +07:00
9ddc3bfd6d
more host hid API
...
adding hid parser
2021-05-18 12:58:24 +07:00
641f55f1f1
remove CFG_TUH_HID_KEYBOARD and CFG_TUH_HID_MOUSE
2021-05-18 12:58:24 +07:00
9324fd8f2e
more hid host API rework
2021-05-18 12:58:24 +07:00
b7a8b278c8
rename tuh_device_is_configured() to tuh_device_configured()
...
- remove tuh_device_get_state()
- more hid mouse clean up
2021-05-18 12:58:24 +07:00
a5cd81a226
correct hid host mount/unmount callback
...
rename HOST_CLASS_HID to CFG_TUH_HID
2021-05-18 12:58:24 +07:00
be165a6713
reworking host hid API
2021-05-18 12:58:24 +07:00
e0dbb489ae
rename CFG_TUSB_HOST_ENUM_BUFFER_SIZE to CFG_TUH_ENUMERATION_BUFSZIE
...
add usbh_get_enum_buf
2021-05-18 12:58:24 +07:00
e83bdcdfdc
reworking hid host
2021-05-18 12:58:24 +07:00
4023d05e93
minor clean up
2021-05-18 12:58:24 +07:00
68fa17e17c
more API rename
2021-05-18 12:58:24 +07:00
e163f85ee0
clean up, rename some HID device symbol/API
...
- add tud_hid_n_interface_protocol()
- rename tud_hid_n_boot_mode() to tud_hid_n_get_protocol()
- rename tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()
- add HID_PROTOCOL_BOOT/REPORT to avoid magic number 0,1
- rename HID_PROTOCOL_NONE/KEYBOARD/MOUSE to HID_ITF_PROTOCOL_ to avoid
confusion
2021-05-18 12:32:20 +07:00
0621df8d26
Update main.c
...
Fix code where HID keyboard was being stuffed into the HID mouse buffer.
2021-05-09 19:11:29 -04:00
5316c4e84a
Update main.c
...
Added new RTOS names to the name string array in print_greeting() in the host example program. The program seemed to hang when a new RTOS was indexed in CFG_TUSB_OS.
2021-05-07 16:35:22 -04:00
05892a5a1e
Merge branch 'master' of github.com:xmos-jmccarthy/tinyusb
2021-05-06 12:18:55 -04:00
b51e0eb860
Fix typo
2021-05-05 18:00:32 -04:00
dab1ed6b32
Add example to be tested
...
Update API description.
2021-05-05 17:42:38 -04:00
7998f11258
USBTMC: remove reference to visa DLL (which only was for windows, and auto-select instead.
2021-04-22 21:47:51 -04:00
59f0fa1e5e
cmake cleanup
2021-04-19 13:30:04 +07:00
803b755554
update per review
2021-04-18 01:50:16 +07:00
38cc459c93
Merge branch 'master' into alisitsyn-esp-based_on_334e95f
2021-04-18 01:30:19 +07:00
f5e02e72ed
espressif: group boards using target name as a family
...
`hw\bsp` separate one family folder to esp32s2, esp32s3
add board specific board.cmake file to override board specific options(features)
fix examples and test scripts to use new family approach
2021-04-16 15:41:42 +02:00
9f925bc900
Added support for Black Magic Probe ( #787 )
...
* Added flash-bmp and debug-bmp targets; added .gdb_history to .gitignore
* Added the BMP variable, defaults to /dev/ttyBmpGdb
The name of the BMP device is different on different systems. On Linux (after installing the recommended udev rules) it'll be /dev/ttyBmpGdb, but the user should be able to override it.
* Update rules.mk
2021-04-16 20:23:27 +07:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
c7e4a86166
Fix bug in audio_4_channel_mic.c
2021-04-15 19:40:57 +02:00
fa0d71f2cf
Try to resolve include hassle in uac2_headset
2021-04-15 17:04:25 +02:00
2e65d1543f
update cmakelist for audio_4_channel
2021-04-15 12:14:01 +07:00
b687a4fc20
Merge branch 'master' into edpt_ISO_xfer
2021-04-15 12:12:52 +07:00
ad11481dd1
update plot script to work on macos and linux
...
also add note for installing pip module
2021-04-15 12:08:50 +07:00
c8bb0020ea
update rp2040 to use pico-sdk externally
...
also try to update ci
2021-04-11 13:37:07 +07:00
2134c1a875
Fix defines in audio_device.c
2021-04-08 21:48:36 +02:00
97d1609c72
Ensure half word alignment in audio 4 channel example
2021-04-08 20:15:08 +02:00
930eca0748
Add 4 channel microphone audio example using software encoding
2021-04-08 19:56:26 +02:00
8b79040c38
code format
2021-04-06 15:34:50 +07:00
e0cb415954
Fix uac2_headset include hassle be declaring value by hand
2021-04-03 18:07:18 +02:00
b3e548d2d6
Fix uac2_headset
2021-04-03 17:57:23 +02:00
f6ba58e370
Fix wrong pointer type in audio_device.c
2021-04-03 17:50:30 +02:00
6f2f5320f2
Fix uac2_headset example
2021-04-03 16:58:05 +02:00
4af5189492
Fix potential bug in support FIFO sizes
2021-04-03 16:53:29 +02:00
9559796337
Fix typo in uac2_headset
2021-04-03 16:29:44 +02:00
c57369ee83
Fix old defines in uac2_headset
2021-04-03 16:22:35 +02:00
475badd087
Add missing #defines in uac2_headset example
2021-04-03 16:10:46 +02:00
5eb893011c
Fix #define error in uac2_headset
2021-04-03 15:59:42 +02:00
fc65f39ff2
Fix error in #defines in uac2_headset
2021-04-03 15:58:41 +02:00
fcb97bd4e9
Fix #define in audio_test
2021-04-03 15:48:09 +02:00
40b2ffcb52
Delete old settings
2021-04-03 10:09:40 +02:00
a1efd41649
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-04-03 09:50:08 +02:00
9b2ddd9cc6
Generalize audio driver for 3 audio functions plus a lot more.
...
- Audio format and parameters are parsed from descriptors thus user no
longer needs to give them explicitely
- Tested for 4 channel software type I PCM encoding with 16 bit with 1
channel per FIFO and 2 channels per FIFO (this is I2S specific)
2021-04-03 09:49:27 +02:00
eb92986b88
Merge pull request #766 from hathach/enhance-midi
...
Enhance midi
2021-04-02 15:47:40 +07:00
7582528067
revert make optimize flag
2021-04-02 15:21:44 +07:00
da59c4ad44
rename midi write()/read() to stream_write() stream_read()
...
also add deprecated for warning and rename hint
2021-04-02 14:43:38 +07:00
080b14b292
fix midi tx fifo overflow cause data corruption
...
rename
2021-04-02 13:26:55 +07:00
735e0dff20
skip freertos example for efm32gg12
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-31 23:45:33 +01:00
2f5dda90b7
Merge pull request #757 from kkitayam/add_support_for_gr_citrus
...
Add support for GR-CITRUS
2021-03-31 22:01:43 +07:00
1d8a79ef4f
remove NVIC_SystemReset() in freertos examples
2021-03-31 20:50:08 +07:00
2e4657d111
change suffix to _asm to be more explicit
2021-03-30 01:09:17 +07:00
ef73a9864f
add suffix _s to object of assembly file
2021-03-29 22:51:11 +07:00
86dab3f7e9
added configurations for RX63X
2021-03-27 20:22:32 +09:00
567c6d437a
remove ses project since it is all broken and occupies space
2021-03-23 15:19:53 +07:00
249852d25c
use boot2_generic_03h for adafruit feather rp2040
...
- also use boot2_generic_03h for now for itsy bitsy and qt rp2040
- change default flash target for rp2040 to flash-pyocd
2021-03-18 19:53:39 +07:00
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
2882390c82
clean up some examples
2021-03-18 15:23:08 +07:00
161b8587bd
Revert "Add Linux support to tmc example"
...
This reverts commit dc2f00cca1
2021-03-17 14:24:14 -04:00
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
dc2f00cca1
Add Linux support to tmc example
...
Replaces visa include with pyvisa, as visa use with PyVISA is being
deprecated.
2021-03-16 17:04:40 -04:00
d566444d58
Add new line at end of python script
2021-03-13 11:41:46 +01:00
de3c03af76
Add python script to plot audio sample data.
2021-03-13 11:37:38 +01:00
db6242f076
move AUDIO_SAMPLE_RATE to example main.c
2021-03-13 00:23:13 +07:00
b6db2ac99d
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-03-10 19:34:22 +01:00
8cb3bd3cd3
Merge remote-tracking branch 'upstream/edpt_ISO_xfer' into edpt_ISO_xfer
2021-03-10 19:33:11 +01:00
d5a5a1cab6
Implement audio PCM type I enc./decoding acc. to 2.3.1.5 Audio Streams
...
Extending capabilities of support FIFOs
Removing copy from to FIFO
Adjusting audio examples
Remove peek/read into other FIFO
2021-03-10 19:32:13 +01:00
794083b647
Merge branch 'master' into edpt_ISO_xfer
2021-03-10 17:10:49 +07:00
1cdd1b0209
Update pico sdk 1.1.0 ( #712 )
...
* update pico-sdk to 1.1.0
also correct fetch_submodule_if_empty behavior
2021-03-10 13:26:14 +07:00
38ebb8502d
clean up
2021-03-10 11:31:50 +07:00
4a73b6a219
update doc for BOARD name, add note for udev on Linux
2021-03-10 11:23:44 +07:00
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
5799c471f1
group h743eval and h743nucleo into stm32h7
...
tested and work well
2021-03-03 20:07:17 +07:00
ce942baad2
update pico-sdk to more recent commit
...
- move target_link_libraries() to family.cmake
- enable pico_bootsel_via_double_reset
2021-03-02 22:57:33 +07:00
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
b066fdc2c6
move fomu to its own family, update ci with build risv
2021-03-02 12:24:12 +07:00
71313d934d
update ci for msp430 family
2021-03-02 11:50:57 +07:00
c34b6b2324
remove lib/CMSIS_4 submodule, move nrf to lib/CMSIS_5
2021-03-02 01:18:34 +07:00
83ce2dfcb7
fix freeRTOS config symbol warning with latest kernel
2021-03-01 22:30:39 +07:00
7ff14a652b
add submodule lib/FreeRTOS-Kernel
2021-03-01 22:13:21 +07:00
c222f6f111
try to fetch needed mcu submodule while running make
2021-03-01 20:25:55 +07:00
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
5ebe53f02d
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-24 20:54:35 +01:00
2934712e43
fix ci
2021-02-24 15:02:28 +07:00
a070626729
add itf argument to hid API to support multiple instances
...
following API signature is changed:
- tud_hid_descriptor_report_cb()
- tud_hid_get_report_cb()
- tud_hid_set_report_cb()
- tud_hid_boot_mode_cb()
- tud_hid_set_idle_cb()
2021-02-24 14:27:20 +07:00
e223d46033
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
...
Conflicts:
src/common/tusb_fifo.h
src/osal/osal_none.h
2021-02-23 19:47:57 +01:00
ac30211853
remove obsolete host example
2021-02-24 00:27:56 +07:00
451650fa32
move ehci and ohci to portable folder
2021-02-23 23:09:48 +07:00
afab5bf497
enable host example ci build for imxrt
2021-02-23 19:50:39 +07:00
5108d76136
host msc: call read_capacity as part of enumeration
...
- add tuh_msc_get_block_count(), tuh_msc_get_block_size()
- rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to
tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming
- change tuh_msc_is_busy() to tuh_msc_ready()
- add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities
- add host msc configured to for state check.
2021-02-23 19:41:11 +07:00
f2ed2ae09a
rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry()
2021-02-23 11:14:19 +07:00
00b4b74e82
rename hcd_lpc18_43 to hcd_transdimension
2021-02-22 17:15:06 +07:00
8f3f21045b
make midi example less ambigous for cable and channel
2021-02-19 10:57:20 +07:00
3df61d6755
Fix a ; in #define definition
2021-02-12 18:25:01 +01:00
cdf600048f
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-12 18:05:20 +01:00
a9fd0a454a
Complete redesign of audio driver.
2021-02-12 16:28:41 +01:00
d2f3e70b64
rename examples folder dfu_rt to dfu_runtime
2021-02-11 12:08:09 +07:00
e12c25ec2c
rename dfu_rt to dfu_runtime for easy reading
...
also rename tud_dfu_rt_reboot_to_dfu to tud_dfu_runtime_reboot_to_dfu_cb
2021-02-11 12:05:22 +07:00
dc64d6ad55
Merge pull request #645 from ipopov/webserial-fix
...
Fix unintended control transfers in webserial example.
2021-02-11 11:25:55 +07:00
5178e2af55
Address review comments:
...
- every switch must have a default
- revert formatting of unchanged lines
2021-02-10 22:14:29 -05:00
ce7fb36337
Fix unintended control transfers in webserial example.
2021-02-10 01:05:37 -05:00
c8499c89db
Set -DCMAKE_BUILD_TYPE=Debug when building in debug for rp2040.
...
This ensures that the Pico SDK, too, is built in debug mode and with
nice debugging symbols.
2021-02-10 00:48:58 -05:00
9c3a44b6a3
update hid_composite_freertos example
2021-02-09 16:06:38 +07:00
d2b8e591f6
tud_hid_report_complete_cb() API
...
update hid composite to make use of tud_hid_report_complete_cb() for
sending reports when possible.
2021-02-09 15:57:29 +07:00
72bcc0685c
add tud_hid_n_gamepad_report() helper for gamepad report
...
- Add gamepad to hid_composite example. Though it needs a bit of extra
work but it will come later as separated PR.
2021-02-08 19:08:16 +07:00
bc80d686f5
clean up
2021-02-08 16:05:28 +07:00
be1bd74b4b
Merge pull request #618 from homeodor/master
...
A CDC-like blocking behaviour for MIDI, incl. SysEx
2021-02-06 12:30:28 +07:00
9f7143af29
CDC-like blocking behaviour for MIDI
...
Also added a dummy readout for MIDI into examples
2021-02-06 00:01:46 +03:00
ae827721ed
Typo fixed
2021-02-02 19:53:07 +05:30
3d95835f22
add consumer control to hid_composite examples
...
both no OS and freeRTOS
2021-02-01 14:47:39 +07:00
0799a91073
Merge branch 'master' into rp2040-logger-enumfix
2021-02-01 13:41:20 +07:00
8e954a4391
added enumerate walkaround for RP2040-E5
...
- PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
- target linke pico_fix_rp2040_usb_device_enumeration
2021-02-01 13:37:37 +07:00
78f50518a4
Merge pull request #610 from hathach/rp2040-followup2
...
Rp2040 followup2
2021-02-01 12:44:53 +07:00
ba69da1d8f
add support for LOG=2
...
LOGGER=rtt is not tested since jlink doesn't support rp2040 just yet
2021-01-29 11:24:05 +07:00
effd82fd9c
fix #558 third attempt
2021-01-28 18:34:58 -07:00
4f988b792c
fix #558
2021-01-28 18:15:49 -07:00
cb8ceba3dd
fix #558
2021-01-28 13:12:54 -07:00
4fef2ddb4c
rp2040 move uart id to board specific
2021-01-27 16:37:31 +07:00
c2d8aa0584
limit artifact to only uf2 for now
...
due to the large size of combined binaries of all boards + all examples
2021-01-26 22:04:20 +07:00
e230d683ca
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
4a0f5cbd63
change output filename to BOARD-Directory
2021-01-26 12:46:24 +07:00
0e585570a3
rename build output
2021-01-25 23:40:52 +07:00
045674745a
Merge pull request #604 from kamtom480/spresense-sdk-2.0.2
...
Update Spresense SDK and fix dcd issues
2021-01-25 22:55:46 +07:00
40e0e7e35f
Define Spresense EP numbers for cdc_msc example
2021-01-25 11:13:56 +01:00
83614418b5
get all device example build with rp2040 (except freeRTOS)
2021-01-25 13:28:23 +07:00
87daf28421
rp2040 skip freertos example
2021-01-24 01:26:38 +07:00
4101df7a75
rp2040 hid_composite compiled and tested
2021-01-24 00:54:58 +07:00
599b428e13
rp2040 dfu_rt dynamic_configuration compiled
...
not tested, but should be OK
2021-01-24 00:52:46 +07:00
26522d0ec5
rp2040 dual cdc compiled and tested
2021-01-24 00:47:49 +07:00
959a94b98d
rp2040 audio_test compile
2021-01-24 00:44:17 +07:00
ffad6eaf80
cmake esp32s2 and rp2040 getting along
2021-01-24 00:22:23 +07:00
cdd1c45306
improve ci for esp32s2
2021-01-23 18:09:57 +07:00
575b43e67d
seperate ci build for family and orphaned boards
2021-01-23 17:32:24 +07:00
c58c8c4229
rp2040 cdc_msc work well
2021-01-23 00:59:50 +07:00
a780a8762b
rp2040 better support multiple boards
2021-01-23 00:32:14 +07:00
b8847de802
get board_test running with pico on both led and button
2021-01-23 00:12:10 +07:00
b6e9c42b02
update cmake build to work with esp32s2 and rp2040
2021-01-22 14:58:32 +07:00
0cf2b02791
Merge branch 'master' into group-boards-into-family
2021-01-22 11:17:10 +07:00
4cd8a95ef7
more ci
2021-01-22 10:43:52 +07:00
2b3008f9a8
fix esp32s2 ci build
2021-01-22 09:41:41 +07:00
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
d7cfd8b91d
replaced variable name to CMDEXE from UNAME.
...
removed the rule that .d files are converted to .P files.
2021-01-14 01:19:43 +09:00
8c5c46454f
also build boards without family
2021-01-13 12:56:48 +07:00
8fa083d79e
added support for cmd.exe as a shell on make.
2021-01-11 15:56:16 +09:00
fc18cd4cbb
skip overflow sram examples for kl25
2020-12-25 23:20:45 +07:00
630692d81b
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
658194ccc4
group more nrf boards
2020-11-28 00:45:44 +07:00
4130c50b01
grouping nrf boards
2020-11-28 00:16:28 +07:00
b572983cc8
group esp32s2 board into its group
2020-11-27 22:31:47 +07:00
94527951a0
add bus suspend & resume support for esp32s2
2020-11-27 15:54:55 +07:00
494e125432
more ci
2020-11-24 00:47:06 +07:00
409a5fb7fc
fix ci build
2020-11-24 00:18:18 +07:00
7860469661
comment out and add note for tud_cdc_connected() in cdc_msc examples
2020-11-24 00:06:59 +07:00
4b4f880785
add tud_ready() check in tud_cdc_n_write_flush()
...
other clean up
2020-11-23 23:40:13 +07:00
308028e17c
Merge branch 'master' into cdc_without_dtr
2020-11-23 23:25:55 +07:00
61ad7bef71
migrate vendor device to new control xfer cb
2020-11-20 15:50:11 +07:00
6a72cc5d48
Changes to CDC example code:
...
- auto flush welcome message at connection event
- provide information to the user if the terminal did not set DTR
2020-11-18 10:16:32 +01:00
e7069da7eb
Reset CDC examples to original state
2020-11-18 09:47:39 +01:00
5456afa8ee
update microchipo driver submodule
2020-11-08 18:09:53 +07:00
1b1e205a30
clean up
2020-11-08 12:40:20 +07:00
ef99d37c97
Merge pull request #551 from dobairoland/master
...
Make the disk disappear on Windows after it was ejected
2020-11-08 12:37:53 +07:00
a708ab6254
Merge pull request #553 from hathach/host-async-control
...
Host async control
2020-11-07 10:52:14 +07:00
4c99c5ff5c
Make the disk disappear on Windows after it was ejected
...
Make the disk disappear on Windows after it was ejected. The device
need to be re-inserted or reseted to re-appear again.
This doesn't affect Linux where the device can be mounted and unmounted
repeatedly.
Closes https://github.com/hathach/tinyusb/issues/549
2020-11-05 15:35:26 +01:00
af9f0f1cd6
Merge remote-tracking branch 'hathach/master' into cdc_without_dtr
2020-11-04 17:11:01 +01:00
67ac40b98d
house keeping: make tu_print_mem format easier to compare with hex2dump
2020-11-01 13:37:56 +07:00
a097b7e51a
net_device: re-factor code so as to not be specific to lwIP
2020-10-24 20:27:57 -05:00
43cb5fabfd
Merge pull request #538 from kasjer/kasjer/uac2
...
audio: Add headset example
2020-10-16 22:08:07 +07:00
a5581b10df
audio: Add headset example
...
This example code creates USB Audio 2.0 headset device.
Device has two audio interfaces first stereo speaker
with 48kHz stereo stream.
Second interface for microphone with 48kHz mono stream.
This example can be used to start working on audio device.
It can be also used to verify ISO endpoints for boards.
Speaker adaptive clock (bound to SOF).
Microphone for now has asynchronous clock.
Volume and mute control while present are not used for data stream
modification.
2020-10-16 08:52:26 +02:00
56277ce216
net_lwip_webserver: efficiency tweaks
2020-10-14 20:26:40 -05:00
437ccac696
implement tuh_msc_scsi_inquiry() / tuh_msc_read_capacity() / tuh_msc_get_maxlun()
2020-10-13 13:23:33 +07:00
9c07a2a4e2
rework msc host
...
- msc host enum is now async
- implement async tuh_msc_scsi_command() / tuh_msc_request_sense() /
tuh_msc_test_unit_ready()
2020-10-13 00:07:51 +07:00
b5d4c8185d
Merge branch 'master' into host-async-control
2020-10-11 16:22:12 +07:00
b8e7e2b7c9
update microchip driver
...
also skip audio_test for same5x for now due to assert() macro conflict
2020-10-11 13:33:06 +07:00
35fae201fb
net_lwip_webserver: tweak main.c comments with smartphone suggestions
2020-10-10 16:49:45 -05:00
762b390433
Merge pull request #521 from PanRe/uac2
...
Uac2
2020-10-10 14:33:42 +07:00
a85c4ee11d
Fix unused parameter in audio test.
2020-10-09 21:59:52 +02:00
14ff7313ee
Fix minor issue in audio example.
2020-10-09 20:36:35 +02:00
63f18cef19
Extend example s.t. a saw tooth is sent.
2020-10-09 20:15:57 +02:00
13abcb953f
rename multiple hid callback
2020-10-09 20:24:10 +07:00
2e464c5015
clean up example
2020-10-09 13:57:23 +07:00
2219068371
rename hid multiple interface
2020-10-09 13:50:55 +07:00
89bf4fa04c
Merge branch 'master' into house-keeping
2020-10-09 13:49:05 +07:00
344d589a35
use pyocd for iMXRT boards
2020-10-09 13:48:08 +07:00
298aa1b669
Cleanup per review on PR
2020-10-08 11:59:12 -05:00
e8b3af038e
add flash-pyocd support
2020-10-08 17:19:48 +07:00
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
db3fe97f62
fix variable names. add itf n callbacks to multihid
2020-10-07 20:36:00 -05:00
3f54c27afa
fix audio_test build
2020-10-07 13:36:03 +07:00
081af79009
fix simple pull request comments. Implement descriptor index hack.
2020-10-02 16:02:00 -05:00
e21ab8d4a9
create hid multiple interface example
2020-10-01 13:15:37 -05:00
142871654e
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-28 18:08:39 +02:00
25bb8830c5
doc: merge example/readme.md into docs/getting_started.md
2020-09-12 09:26:41 +07:00
66a10ec9c8
rework usbh control transfer
...
use series of complete callback instead of blocking semaphore, which is
more noOS friendly. still working with hid host
2020-09-07 15:19:20 +07:00
828f720207
refactor hub class
...
- separate connect/disconnect handling
- hub work with full speed, but doesn't seem to work with Low speed
device (with mcb1800)
- need to update msc host after migrating from isr to xfer_cb (blocked
at inquiry)
2020-09-05 20:20:45 +07:00
9531e47d10
update example to test with mouse
2020-09-05 14:59:07 +07:00
e09ebea7b9
Remove tud_cdc_connected check from examples
2020-09-04 17:25:32 +02:00
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
5fb3d439b3
update ci to also build host example
2020-09-04 01:32:30 +07:00
865ebf7c5d
fflush(stdout) for keyboard host example
2020-09-04 00:50:10 +07:00
7828c396db
keyboard host work as proof of concept
2020-09-04 00:23:57 +07:00
35aee4a6af
more hid host work
2020-09-03 23:57:51 +07:00
ef651e0734
fix #449 remove obsolete pipehandle from hid host
2020-09-03 17:07:29 +07:00
f4e3c6fd8e
clean up
2020-09-01 17:12:31 +07:00
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
c14f68e2c1
Commit before sharing.
...
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
78f1576e93
Merge pull request #412 from hathach/fix-net-cast-align
...
suppress cast-align warnings for net device driver
2020-07-29 11:23:11 +07:00
503c15217e
example to call tud_init() after freeRTOS kernel is started
...
add note for usb init when using with RTOS
2020-07-23 09:20:45 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
787c891702
add note for MS OS 1.0 Descriptor at 0xEE
2020-07-21 21:00:11 +07:00
8e1290e51e
minor clean up
2020-07-19 13:13:21 +07:00
6ddee1b5cf
more update
2020-07-18 01:07:44 +07:00
5ca748a68e
rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
...
rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
2020-07-16 15:34:16 +07:00
fea6fb73a1
add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun
2020-07-16 13:04:10 +07:00
ed065691ef
fix unintended changes to webusb example
2020-07-16 00:55:19 +07:00
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
dbced9911d
Merge pull request #447 from hathach/add-stm-hs
...
Add support for STM32 OTG HS core
2020-07-08 19:47:24 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
f82655a212
correct EP Size for cdc dual and webusb example
2020-07-06 18:55:31 +07:00
400c2d2e50
correct led dfu_rt example
...
also add example usage note
2020-06-30 23:26:51 +07:00
62239bb576
cdc-acm: Use 512 bytes when in HS mode.
...
Removes error:
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
while enumerationg.
2020-06-30 11:02:41 +02:00
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
2b9466dbc0
Merge pull request #445 from hathach/add-kaluga-bsp
...
added esp32s2 kaluga bsp
2020-06-29 19:16:09 +07:00
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
d96fa8d407
examples/readme.md: Add hint to build for debug.
2020-06-21 14:33:47 +02:00
c67b3a242e
update example config and descriptor with better Highspeed support
2020-06-15 23:34:09 +07:00
e89fea8237
update midi
2020-06-15 23:09:43 +07:00
0bfa839ac0
clean up, update other example config
2020-06-15 23:06:17 +07:00
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
710c54f8cb
allow hs ep open with 512 bytes
2020-06-01 01:36:09 +07:00
e0490ae786
fix idf usb pin init changes
2020-05-29 13:06:33 +07:00
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
d108ea4326
implement hcd_uframe_number for ohci
...
able to get 8 byte descriptors using LPC1769 + base, but failed to reset
and set address.
2020-05-22 21:45:34 +07:00
4c01099a3d
update makefile to build with ohci host
...
update ses project for lpc1769 with rtt
2020-05-22 20:57:52 +07:00
f308990ab5
Merge branch 'master' into update-host
2020-05-22 15:28:22 +07:00
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
81b1f97ef7
suppress cast-align warnings for net device driver
2020-05-18 13:23:40 +07:00
a7db945cff
temporariyly suppress cast-align warning for net_device and net example
2020-05-17 15:34:14 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
MasterPhi