William D. Jones
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
William D. Jones
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
William D. Jones
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
William D. Jones
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b
) cleanups.
2019-02-08 12:05:44 -05:00
William D. Jones
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
William D. Jones
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
William D. Jones
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
William D. Jones
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
William D. Jones
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
William D. Jones
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
William D. Jones
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
William D. Jones
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
William D. Jones
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
William D. Jones
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
William D. Jones
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
William D. Jones
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
William D. Jones
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
777f41a066
clean up
2019-01-29 18:47:29 +07:00
William D. Jones
9e76635465
stm32f4: Clarify required FIFO sizes and observed behavior.
2019-01-24 04:18:53 -05:00
William D. Jones
fe7f304ad4
stm32f4: Start adding OUT interrupt handling, fix buffer sizes; RXFIFO
...
too low for some reason, TXFIFO EP0 used wrong bitmask.
2019-01-24 03:06:57 -05:00
hathach
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
William D. Jones
01117fb965
stm32f4: Finish dcd_edpt_xfer implementation (OUT xfers not functional yet).
2019-01-23 03:31:44 -05:00
William D. Jones
b41f610514
stm32f4: Remember to turn off TXFE when IN xfer is done; it not
...
automatically cleared like EPENA.
2019-01-23 02:24:29 -05:00
William D. Jones
836d13fc4b
stm32f4: Fix FIFO write logic (requires 32 bit writes).
2019-01-23 02:06:07 -05:00
William D. Jones
aa9a7e882c
stm32f4: Properly set control endpoint max packet size.
2019-01-23 00:55:45 -05:00
William D. Jones
17e418bce4
stm32f4: Fix incorrect xfer length for short packet IN xfers.
2019-01-23 00:44:55 -05:00
William D. Jones
d1150432fe
stm32f4: Remove assumption that EP 0 is only control endpoint.
2019-01-23 00:12:33 -05:00
William D. Jones
51c0ce3f6b
stm32f4: Implement interrupt handling for IN packets (first signs of life).
2019-01-22 23:51:58 -05:00
William D. Jones
43c890615a
stm32f4: Start implementing dcd_edpt_xfer.
2019-01-22 00:42:43 -05:00
William D. Jones
69f5f18fd6
stm32f4: Remove some template commented code.
2019-01-21 23:45:40 -05:00
William D. Jones
71e1b9d045
stm32f4: Setup packet events in tinyusb now functional.
2019-01-19 21:12:20 -05:00
William D. Jones
5720aef7bb
stm32f4: Implement setup packing receive, fix typo in FIFO receive size.
2019-01-19 20:03:18 -05:00
William D. Jones
06c15bf913
stm32f4: Complete initialization for EP0 (packet handling not implemented).
2019-01-19 17:56:53 -05:00
William D. Jones
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
William D. Jones
03cbd406cb
dcd_stm32f4: Add USB init skeleton based on manual (does not enumerate).
2019-01-11 19:53:24 -05:00
William D. Jones
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
William D. Jones
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
William D. Jones
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
hathach
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
hathach
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
hathach
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
hathach
e3514b8054
rename hcd_device_remove to hcd_device_close
2018-12-12 11:34:09 +07:00
hathach
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
hathach
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
hathach
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
hathach
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
hathach
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
hathach
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
hathach
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
hathach
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
hathach
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
hathach
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
hathach
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
hathach
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
hathach
658c2ff570
rename
2018-11-30 12:56:09 +07:00
hathach
723e02780d
clean up
2018-11-30 12:51:54 +07:00
hathach
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
hathach
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
hathach
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
hathach
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
hathach
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
hathach
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
hathach
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
hathach
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
hathach
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
hathach
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
Scott Shawcroft
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
hathach
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
Scott Shawcroft
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
Scott Shawcroft
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
Scott Shawcroft
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
hathach
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
hathach
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
hathach
4e8400e6fb
more clean up
2018-11-22 21:58:06 +07:00
hathach
a1faf5c9cb
clean up dcd lpc43xx
2018-11-22 21:37:23 +07:00
hathach
569e85a0c0
cdc work ok with lpc43xx
2018-11-22 17:40:20 +07:00
hathach
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
hathach
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
hathach
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
hathach
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
hathach
a0ce92bcfd
update dcd samd21
2018-11-21 13:01:39 +07:00
hathach
155edc7b00
fix ses irq vector
2018-11-21 12:36:28 +07:00
hathach
d036f62b0e
samd51 fix stable issue with dcd
2018-11-20 17:25:41 +07:00
hathach
c503d48ec4
clean up
2018-11-20 01:20:39 +07:00
hathach
00694b56c5
nrf5x: clean up dcd, add comment
2018-11-16 22:17:11 +07:00
hathach
b62ca2e5cd
nrf5x: correct control transfer direction
...
added dcd description.
2018-11-16 21:52:23 +07:00
hathach
5732be224c
update example for PR. correct share_control definition
...
- rename dcd,hal to dcd_samd51, hal_samd51 since some IDE has issue with
duplicated names (e.g keil, ses).
2018-11-14 16:03:58 +07:00
Scott Shawcroft
537a29273c
Exempt from strict warnings for struct packing and add MCU options
2018-11-09 00:10:44 -08:00
Scott Shawcroft
30e3c64134
Polish up control split and treat it more like a normal endpoint.
2018-11-08 13:45:30 -08:00
Scott Shawcroft
7a40ec2647
Split out the control endpoint logic
2018-11-07 23:04:34 -08:00
Scott Shawcroft
c582c0fda9
Add SAMD21 and SAMD51 support for CircuitPython.
...
The ProtoThreads style subtasks were removed because it led to
extremely unclear control flow. RTOSes can be used if threading is
needed.
Also added some additional functionality to MSC to support dynamic
LUNs and read-only LUNs.
2018-11-07 12:02:28 -08:00
hathach
b2f18744fe
add dcd event helper setup_recieved and bus_signal
2018-10-25 15:02:43 +07:00
hathach
55427606ef
replace dcd_xfer_complete by dcd_xfer_complete()
2018-10-24 00:44:26 +07:00
hathach
177adf4bfa
replace dcd_bus_event() and dcd_setup_received() by dcd_event_handler()
2018-10-23 16:31:45 +07:00
hathach
c7340f4b0e
clean up helper func
2018-10-23 12:19:32 +07:00
hathach
a660fb0cfc
clean up, update nrfx to 1.3.0
2018-09-25 12:57:46 +07:00
hathach
61e4a8c3d3
remove CFG_TUD_CDC_FLUSH_ON_SOF option
2018-08-30 15:20:15 +07:00
hathach
583326e535
nrf5x fix an issue with EP0STATUS require Easy DMA
2018-08-28 15:57:21 +07:00
hathach
b0d14e2e41
minor nrf52 driver correct
2018-08-28 13:15:03 +07:00
hathach
23c7c2102b
fix compiler warnings
2018-08-23 20:54:51 +07:00
hathach
c5d2f661e7
rename common func to avoid conflict
2018-08-23 20:09:28 +07:00
hathach
e07b1acbed
rename VERIFY to TU_VERIFY to avoid conflict with application
2018-08-13 18:10:23 +07:00
hathach
b07124c623
fix issue with cdc write failed sometimes
2018-08-13 18:09:29 +07:00
hathach
6d96b12e27
improve auto descriptor
2018-08-01 00:50:04 +07:00
hathach
5dd02cbdd3
house keeping
2018-07-27 16:59:57 +07:00
hathach
86c445cd71
move nrf_drv_usbd_errata to portable folder
2018-07-26 16:12:09 +07:00
hathach
544f9c1315
add dcd_edpt_stalled() API
...
- implement control endpoint get status, endpoint set feature
2018-07-25 21:21:33 +07:00
hathach
5f6cd49031
clean up include
2018-07-23 23:41:14 +07:00
hathach
51903a60c5
rename timeout_ API to tu_timeout API
2018-07-23 22:36:29 +07:00
hathach
361928f429
rename timeout_timer.h to tusb_timeout.h
2018-07-23 22:32:21 +07:00
hathach
4342325ee1
reworking device hid class driver
2018-07-23 15:25:45 +07:00
hathach
421ae8fc82
nrf: move power setup out of stack (to application)
2018-07-17 23:55:56 +07:00
hathach
a0849fee9f
add nrf errata check temporarily part of hal_nrf
2018-07-10 22:08:03 +07:00
hathach
40de723d41
allow tusb_init() to call multiple times
...
enhance nrf5x
2018-07-05 00:23:47 +07:00
hathach
1faf0a81e4
clean up
2018-07-02 17:32:09 +07:00
hathach
1ee2bee5c8
clean up
2018-07-02 11:09:22 +07:00
hathach
142300ca60
remove sdk, add nrfx as submodule
...
update segger project to work with nrfx
2018-07-02 11:00:05 +07:00
hathach
6b2b6aaa3f
fix msc device with transfer len > 65k bytes
2018-06-24 00:16:22 +07:00
hathach
84ef486418
enhance and fix bug with dcd for nrf5x
...
fix issue with large enough bulk out.
2018-06-23 13:20:07 +07:00
hathach
19807f0c07
clean up
2018-06-19 22:59:16 +07:00
hathach
424735d440
rename subfolder source to src
2018-06-18 14:05:24 +07:00