a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
dbfad50d43
house keeping
2013-11-20 12:21:29 +07:00
d284ecaccb
add sw int_on_complete support for dcd lpc17xx
2013-11-20 12:03:04 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
d4a260c090
refractor usbd's get descriptor
2013-11-15 15:05:23 +07:00
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
9cb99d3716
house keeping
2013-11-08 19:37:26 +07:00
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
3945869cc2
refractor tusb_descriptor, adding support for cdc descriptor
2013-11-07 12:28:10 +07:00
hathach