9bed4e2e21
refactor nxp TDI dcd_edpt_xfer_fifo
2021-09-13 00:45:15 +07:00
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
5f141a4c13
Merge pull request #1077 from hathach/st-synopsy-compliance
...
St synopsy compliance
2021-09-08 18:00:44 +07:00
d077574097
reset PID to DATA0 when open endpoint
2021-09-08 17:56:22 +07:00
67e80f60e3
fix build with gd32vf103
2021-09-08 13:35:11 +07:00
4ac136d81d
implement remote wakeup for stm synopsys
2021-09-08 00:57:07 +07:00
a54a974fa5
make synopsys usbcv compliance
...
- implement dcd_edpt_close_all()
- reset dtoggle when open endpoint
- correct dev interrupt mask on bus reset
2021-09-07 23:02:57 +07:00
f3da48d46a
Implement dcd_edpt_close_all() for Renesas RX family
2021-09-07 23:28:54 +09:00
d6e9fe38be
rp2040 implement dcd_edpt_close_all()
...
aslo rename reset_ep0_pid() and clean up. We only need to reset pid when
setup packet received
2021-09-01 19:44:12 +07:00
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
ab0c3e8dd0
fix rp2040 chapter 9 TD 9.6 test
2021-08-31 17:41:08 +07:00
16b802d50c
add dcd_edpt_close and iso xfer.
2021-08-31 12:02:19 +02:00
864d8381a7
dcd_transmission xfer_fifo support.
2021-08-31 11:59:51 +02:00
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
ad21b69277
fix nrf clear data toggle sequence when clearing stall
2021-08-29 12:05:34 +07:00
66c292e2ec
fix a couple of nrf dcd issue
...
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
2021-08-29 00:34:21 +07:00
8bad0af849
explicitly clear stall and data toggle for edpoint upon open()
2021-08-27 22:31:08 +07:00
81c73c235f
implement dcd_edpt_close_all() for nrf52840
2021-08-27 22:30:30 +07:00
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
3309425211
sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB
...
separate dev0 from _usbh_devices pool to save sram
2021-08-23 19:56:53 +07:00
75cd593b60
add hcd_devtree_get_info()
...
remove usbh_hcd.h
2021-08-23 17:00:41 +07:00
a490a3fe61
add hcd attr, add note for ehci framelist on NXP derivative
2021-08-23 15:40:57 +07:00
4ca176c291
refactor ehci init api
2021-08-23 12:37:54 +07:00
6a16f6ccdd
rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
2021-08-23 11:01:40 +07:00
69e539fda4
Fix CI.
2021-08-21 12:11:35 +02:00
e20755442a
nuc126: fix set_address & disable sof
2021-08-21 12:04:02 +02:00
ff59e98a6a
Add compile switch to enable SOF during suspend only
2021-08-19 23:57:34 +09:00
351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
c737aa6fbb
Merge pull request #693 from HiFiPhile/dcd_same70
...
SAMx7x (E70, S70, V70, V71) DCD Support
2021-07-22 00:07:33 +07:00
8c6cd5396c
Fix non-DMA IN irq.
2021-07-21 10:50:07 +02:00
5492d9148c
Re-enable SETUP irq on EP0 stall.
2021-07-21 10:29:47 +02:00
9c26c0c01e
Remove redundant TX irq.
2021-07-21 09:42:26 +02:00
eec927ea95
Fix EP0 issue (again)
2021-07-21 00:28:51 +02:00
fa9a327a71
Workaround of EP0 issue, clean up.
2021-07-20 13:24:39 +02:00
895c913aa9
Merge branch 'dcd_same70' of https://github.com/HiFiPhile/tinyusb into dcd_same70
2021-07-19 22:04:34 +02:00
75f61328ea
Remove clock init.
2021-07-19 22:03:47 +02:00
cee980c598
Fix for dcd_synopsys driver integer overflow in HS mode (issue #968 ).
2021-07-19 17:45:12 +10:00
05f59fb8ed
clean up warning
2021-07-19 12:08:01 +07:00
8cae17bfc8
Fixing NAKed OUT xfer
2021-07-19 01:07:33 +02:00
bae0d3b7bb
Fix build error.
2021-07-17 14:42:23 +02:00
7e3e41952f
Fix ISO support.
2021-07-17 13:48:21 +02:00
b194aa240b
Merge branch 'master' into dcd_same70
2021-07-17 12:10:35 +02:00
1ff3b76451
remove unnecessary blocking operation.
...
add comments why resume event is sent manually.
2021-07-05 21:27:08 +09:00
3019c6eb40
Add SUSPEND/RESUME handling for Renesas RX family.
2021-07-03 23:35:58 +09:00
4c0cce4b1d
Make toolchain dependency more consistent
2021-06-29 21:45:18 +02:00
36ba9608bd
Merge from current master. Fixed a compilation error with the GNUC toolchain
2021-06-29 00:43:41 +02:00
cb0f1d98db
Merge remote-tracking branch 'origin/master' into CCRX_Port
...
# Conflicts:
# src/portable/renesas/usba/dcd_usba.c
# src/tusb_option.h
2021-06-29 00:19:30 +02:00
6e939de9d6
Merge pull request #891 from hathach/host-rp2040-double-buffer
...
RP2040 double buffer
2021-06-28 17:39:09 +07:00
b2feae15e4
Merge pull request #927 from hathach/add-rx65n-board
...
Add rx65n board
2021-06-28 13:53:42 +07:00
b5ce269675
GCC 11 build fix
...
During Adafruit Bootloader compilation, I spotted bellow error which do not allow me build project.
``` c
inlined from 'hfclk_running' at lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:785:13:
lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:792:31: error: 'is_running' may be used uninitialized [-Werror=maybe-uninitialized]
792 | return (is_running ? true : false);
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~
```
2021-06-26 17:03:46 +02:00
393a9120ac
add the entry for RX65N
2021-06-26 23:09:18 +09:00
51c6444e1d
final clean up
2021-06-22 23:49:24 +02:00
c5f6b57755
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-22 23:21:01 +02:00
81fa9966de
Merge pull request #895 from ElectronicCats/master
...
add support SAML21
2021-06-20 01:01:00 +07:00
6b621baeb3
fix race condition with control since TASKS_EP0RCVOUT also require EasyDMA
2021-06-19 01:58:27 +07:00
82618d2d5f
fix build with mm32 board
2021-06-18 17:18:11 +07:00
5006b1065a
remove duplicate mm32 dcd
2021-06-18 12:49:41 +07:00
7b27607f1a
mit license
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
3ba72b53d8
Add MM32 SDK and USB driver
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
832d22d7ad
force single buffered for device mode, out endpoint
2021-06-17 01:55:35 +07:00
30fff56aa4
Revert "Use byte copy.", add barrier after buffer write.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-16 00:18:38 +02:00
67a6560ec9
Default use dual bank for FS, use dcd irq switch.
2021-06-15 21:52:14 +02:00
6cc702e9ec
Prevent buffer overflow.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-15 21:16:51 +02:00
54dc694be4
Use byte copy.
2021-06-15 19:11:53 +02:00
ca8e8041ef
Fix resume, always init FS clock.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-15 17:53:09 +02:00
7bed7d70f0
add support SAML21
2021-06-15 00:01:28 -05:00
5c567129ea
fix calculating xferred bytes with double buffer with short packet on buffer0
2021-06-13 18:30:26 +07:00
f38c460433
fix ep tx with double buffered
2021-06-13 17:19:14 +07:00
bd039c8d37
fix build with log for device
2021-06-13 16:16:25 +07:00
1af64f9729
remove sent_setup from hw endpoint
2021-06-13 15:31:00 +07:00
289ccf3c93
remove dev_ep_map
2021-06-13 13:19:20 +07:00
85fc423569
Rename SAM7X to SAMX7X
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 12:36:59 +02:00
f039607afc
Fix indent.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 11:19:08 +02:00
776a770947
dcd: sam7x: rename family dcd to include the whole family
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:09:24 +01:00
60d8ecbfe6
clean up
2021-06-11 22:36:17 +02:00
1c23462b43
weak atrribute work around removed from CCRX_Port
2021-06-11 22:25:36 +02:00
2196991df3
dcd: same70: trim trailling spaces
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:03:36 +01:00
bcd3e31bd6
dcd: same70: fix unused variable warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 20:59:48 +01:00
9a03ab9dfa
dcd: same70: change cmsis deprecated macros
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 20:52:22 +01:00
910e11a8ab
fix ci build
2021-06-11 19:04:16 +07:00
dfe5a727c6
log clean up
2021-06-11 18:54:09 +07:00
b39faa15ef
map pico_info to log2, pico_trace to log3
2021-06-11 18:44:08 +07:00
a6d22f5a68
replace pico_warn by log level 1
2021-06-11 18:40:01 +07:00
66c8a13f13
remove unused variable in hw endpoint
...
last_buf, buf_sel, transfer_size
2021-06-11 18:26:41 +07:00
93cb2ff4cf
more refactor double buffered rp2040
2021-06-11 18:16:13 +07:00
1d48320d8a
rename hw endpoint
...
- total_len to remaining_len
- len to xferred_len
2021-06-11 17:58:29 +07:00
5d6e381ef6
refactor rp2040 usb
...
- make _hw_endpoint_xfer_sync and _hw_endpoint_start_next_buffer private
- drop prefix _ from _hw_endpoint_xfer_continue and
_hw_endpoint_reset_transfer
2021-06-11 17:34:51 +07:00
c291deccfa
Add fifo & DMA linked list mode support.
2021-06-11 12:17:11 +02:00
24de9d39af
Format.
2021-06-11 12:17:11 +02:00
1dafcd1132
- Add Full Speed switch
...
- Add DMA support
- Add Dual bank support
Signed-off-by: HiFiPhile <admin@hifiphile.com>
2021-06-11 12:17:11 +02:00
4f4a33b378
Seems like fixed ep0 issues, code format.
...
Signed-off-by: HiFiPhile <admin@hifiphile.com>
2021-06-11 12:17:11 +02:00
f8aa4b3ff3
Add sketchy SAME70 DCD driver.
2021-06-11 12:17:10 +02:00
a1a03c92f6
double buffered work with host
2021-06-11 17:05:49 +07:00
43656dc0a7
more clean up
2021-06-10 23:29:02 +07:00
cf0a475a2e
clean up
2021-06-10 22:00:59 +07:00
c7f51cde40
implement usbh_edpt_busy (WIP), remove hcd_edpt_busy
2021-06-10 17:19:21 +07:00
7e6cba7359
remove hcd_edpt_stalled()
2021-06-10 16:55:12 +07:00
3c4ab6bd8a
Merge pull request #883 from hathach/fix-rp2040-host-transferred-bytes
...
fix computing transferred bytes with E4
2021-06-10 11:35:51 +07:00
501de2a5e8
fix computing transferred bytes with E4
2021-06-08 10:29:22 +07:00
c2b85c8d6d
add OPT_MCU_MM32F327X
...
move dcd_mm32f into mindmotion folder
2021-06-07 18:51:44 +07:00
26b9fc38ed
Add MM32 SDK and USB driver ( #869 )
...
* Add MM32 SDK and USB driver
* add mindmotion mm32sdk as submodule
remove the local copy of mm32
* mit license
Signed-off-by: zhangslice <1304224508@qq.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-07 17:32:46 +07:00
5a554508ca
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-03 22:17:30 +02:00
c81bc38d42
Add __unused to variables that are only used if TU_LOG does something
2021-06-03 10:10:44 -05:00
e26cf6b26c
Missing RX device dependency corrected
2021-06-02 21:33:32 +02:00
8ea0dfba68
Merge pull request #865 from kilograham/pico-0.10.0
...
Pico 0.10.0
2021-06-03 01:02:54 +07:00
bc0a0386e9
clean up
2021-05-31 18:41:08 +07:00
31077f48d2
correct ohci endpoint address in xfer complete
2021-05-31 18:16:07 +07:00
4e98ce9147
use hcd_frame_number() instead of uframe
2021-05-31 18:15:47 +07:00
da8000d42d
clean up ohci, remove obsolete api
2021-05-31 16:34:16 +07:00
04797bc5a5
clean up
2021-05-31 16:05:55 +07:00
3fb80e76ce
remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
2021-05-31 12:08:37 +07:00
5cf930d78a
fix cast-align warning in msc host
2021-05-31 11:11:00 +07:00
c2a0c1507b
add more comment
2021-05-30 23:44:29 +07:00
54c9150574
add errata number
2021-05-30 23:41:59 +07:00
6498ee1996
fix incorrect data toggle when max packet size < 64
...
fix host buf_sel panic with "already available"
2021-05-30 23:35:54 +07:00
3973ec4b5e
rp2040: fix debug compilation error
2021-05-30 08:16:15 -05:00
b4f092ec74
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-05-29 21:23:39 +02:00
164778a716
update limit each transfer not less than 64
2021-05-28 17:42:13 +07:00
9ad6fadf6a
more include clean up
2021-05-27 18:34:07 +07:00
b36b211c26
clean up tusb_fifo.h include
2021-05-27 17:58:42 +07:00
13613eafb7
correct ehci control endpoint address report on xfer complete
...
improve host log
2021-05-18 12:58:24 +07:00
1dd2cd43dd
add hcd_ehci.h as interface for ehci port
2021-05-18 12:58:24 +07:00
9233269a2c
only apply errata walkaround for nrf52
2021-05-11 18:38:23 +07:00
e2f795067a
Allow build for NRF5340 MCU
...
Errata code referred to NRF_USBD_BASE.
This definition is not present in NRF5340 but both NRF52 and NRF53
do have NRF_USBD which maps to NRF_USBD_BASE for NRF52 and
to NRF_USBD_S_BASE for NRF5340.
This just make build possible for NRF5340.
2021-05-11 12:37:08 +02:00
72f5202086
Update trace statements that referenced deprecated structure elements.
2021-05-10 10:09:09 -04:00
2a343ba916
Merge pull request #826 from hathach/minor-cleanup
...
minor clean up
2021-05-10 19:29:45 +07:00
13de8f5d98
minor clean up
2021-05-10 19:15:46 +07:00
13b510ad8e
Update hcd_rp2040.c
...
Remove reference to the deprecated "num" and "in" members of struct hw_endpoint which still exist in an assert statement and break DEBUG builds.
2021-05-07 16:49:48 -04:00
42a1d2f3b9
Merge pull request #804 from hathach/audio_make_dma_ready
...
Implement functions to allow for DMA usage in audio driver.
2021-05-02 15:29:38 +07:00
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
a8e109cb3d
clean up
2021-04-26 17:14:20 +07:00
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
f14daf2081
fix unaligned access with port1 hs
2021-04-24 15:04:58 +07:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
8bed369c7f
lpc55 better multiport support
2021-04-24 11:30:14 +07:00
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
03f974c9b9
Implement functions to allow for DMA usage in audio driver.
...
- Add tud_audio_n_get_ep_out_ff(), tud_audio_n_get_ep_in_ff(),
tud_audio_n_get_rx_support_ff(), and tud_audio_n_get_tx_support_ff()
- Change get_linear_read/write_info() to return linear and wrapped part
at once
- Adjusted affected code in audio_device.c and tested with
audio_4_channel.
2021-04-23 10:27:48 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
b687a4fc20
Merge branch 'master' into edpt_ISO_xfer
2021-04-15 12:12:52 +07:00
3c84776e0a
minor clean up
2021-04-15 12:09:12 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
3acf0c2d73
revert dcd_edpt_xfer_fifo() implementation for esp32s2
2021-04-06 01:00:00 +07:00
69ad092fce
revert dcd_edpt_xfer_fifo() implementation for nuc120 121
2021-04-06 00:13:12 +07:00
49b2d8f26c
revert dcd_edpt_xfer_fifo() implementation for msp430
2021-04-06 00:07:17 +07:00
8d2dfe872c
revert dcd_edpt_xfer_fifo() implementation for stm32_fsdev
2021-04-05 19:19:49 +07:00
bebe2f0bbf
revert dcd_edpt_xfer_fifo() implementation for nuc505
2021-04-04 22:50:26 +07:00
586a46c7d3
revert dcd_edpt_xfer_fifo() implementation for samg
...
samg fifo is accessed byte by byte (although the register is 32 bit).
2021-04-04 21:33:19 +07:00
a1efd41649
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-04-03 09:50:08 +02:00
4a597c9698
cleanup
2021-03-28 12:42:28 +09:00
a1f1941c3f
fixed a OUT transfer did not completed multiple of the max packet size
2021-03-27 16:03:04 +09:00
e010ea30e5
using BRDY interruption for handling IN transfers.
2021-03-27 14:42:19 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
13735eb21d
added dcd for Renesas USBa
2021-03-26 19:30:53 +09:00
2807644e7e
add efm32 driver
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 20:45:56 +00:00
a60bd0c8ac
Fix bug in writing to constant src/dst address.
...
Copying has to be conduct in full words (at least for STM32). Renamed
copy function to tu_fifo_write_n_const_addr_full_words()
2021-03-23 19:33:04 +01:00
64f41dea62
fix race condition that could cause drop packet of Bulk OUT transfer
...
NRF_USBD->SIZE.EPOUT[epnum] only need to write once to enable
Bulk/Interrupt transfer. We only need to do it in dcd_edpt_open() and
dcd_edpt_clear_stall()
2021-03-18 15:07:07 +07:00
82e24306e2
fix build with OPT_MCU_LPC177X_8X
2021-03-16 15:49:09 +07:00
a397353916
fix ci build with rp2040
2021-03-10 17:58:39 +07:00
794083b647
Merge branch 'master' into edpt_ISO_xfer
2021-03-10 17:10:49 +07:00
8cabbb28df
fix enum walkaround forever check for SE0 when pull up is disabled
2021-03-04 18:36:18 +07:00
a1b07ae14c
Change copy modes for new read/write functions in tusb_fifo.c
2021-03-02 21:52:42 +01:00
3cdb82c21c
Change for copy modes in dcd_synopsis.c
2021-03-02 21:42:24 +01:00
7b8a08d2e1
Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()
2021-03-02 20:00:39 +01:00
c8b6d9b990
Revert implementation of dcd_edpt_iso_xfer()
2021-03-02 19:28:35 +01:00
a298045f6c
clean up
2021-03-02 23:30:21 +07:00
9d5e369170
rp2040 add disconnection detection
...
- also use dcd_event_bus_reset()
- Add TODO for suspend, resume later on (need to test with/without vbus
detection).
2021-03-02 23:24:36 +07:00
1676a836d1
fix rp2040 host build
2021-03-02 14:54:12 +07:00
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
5a753c1ab0
Merge pull request #675 from majbthrd/rp2040epaddr
...
rp2040: use TU endpoint conventions and remove redundant variables
2021-02-27 00:38:53 +07:00
eb44b6f7db
rp2040: improve _hw_endpoint_init()
2021-02-26 11:07:34 -06:00
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
0c05a02e67
Merge pull request #682 from hathach/rp2040_fix_hcd_init
...
Update RP2040 hcd_init to have rhport argument.
2021-02-26 11:52:48 +07:00
e6e7c73f6e
Update RP2040 hcd_init to have rhport argument.
2021-02-25 15:48:19 +00:00
efea18a888
Merge branch 'master' into rp2040epaddr
2021-02-25 09:15:42 -06:00
0632ecf556
Merge branch 'master' into rp2040device
2021-02-25 08:57:09 -06:00
999ef227d0
rp2040: requested code mode in rp2040_usb.h
2021-02-25 08:45:47 -06:00
50a0bddd8b
Merge pull request #672 from majbthrd/rp2040trim
...
rp2040: correctly size variables to reduce RAM usage
2021-02-25 21:17:59 +07:00
762f262be7
rp2040: requested change from TU_MIN to tu_min16
2021-02-25 07:58:54 -06:00
5ebe53f02d
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-24 20:54:35 +01:00
448dcdc4cf
spresense: fix setup processed flag
2021-02-24 17:39:16 +01:00
a7f07a1a63
Fix pointer type
2021-02-23 21:53:17 +01:00
697c9476b7
Fix pointer type
2021-02-23 21:42:38 +01:00
cb33840a9b
Fix pointer type
2021-02-23 21:15:27 +01:00
e00178a1af
rp2040: don't compile in host code when in device mode
2021-02-23 14:04:56 -06:00
00248de15a
Fix shadowing declartion in dcd_da146xx.c
2021-02-23 20:23:26 +01:00
c76e04f835
Add dcd_edpt_iso_xfer() to dcd_template.c
2021-02-23 19:50:54 +01:00
e223d46033
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
...
Conflicts:
src/common/tusb_fifo.h
src/osal/osal_none.h
2021-02-23 19:47:57 +01:00
313dd1439d
Implement dcd_edpt_iso_xfer() for dcd_da146xx.c BUT WITHOUT DMA SUPPORT
2021-02-23 19:41:21 +01:00
c5422a5c48
rp2040: use TU endpoint conventions and remove redundant variables
2021-02-23 12:06:41 -06:00
656673fb58
Merge pull request #674 from hathach/host-msc
...
Enhance Host MSC
2021-02-24 00:19:38 +07:00
451650fa32
move ehci and ohci to portable folder
2021-02-23 23:09:48 +07:00
5a8ae31316
rp2040: leverage existing macro for capping endpoints in pico-sdk
2021-02-23 10:08:38 -06:00
592d047936
rp2040: correctly size variables to reduce RAM usage
2021-02-22 20:53:16 -06:00
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
c5b8980398
separate hcd_init from ehci
2021-02-22 22:40:51 +07:00
hathach