kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fix build with mm32 board

This commit is contained in:
hathach 2021-06-18 17:18:11 +07:00
parent 5006b1065a
commit 82618d2d5f
12 changed files with 251 additions and 185 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h
View File

@ -45,7 +45,12 @@
// Include MCU header
#include "bsp/board_mcu.h"
// TODO fix later
#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
extern u32 SystemCoreClock;
#else
extern uint32_t SystemCoreClock;
#endif
/* Cortex M23/M33 port configuration. */
#define configENABLE_MPU 0

4
examples/device/hid_composite_freertos/src/FreeRTOSConfig.h
View File

@ -45,7 +45,11 @@
// Include MCU header
#include "bsp/board_mcu.h"
#if CFG_TUSB_MCU == OPT_MCU_MM32F327X
extern u32 SystemCoreClock;
#else
extern uint32_t SystemCoreClock;
#endif
/* Cortex M23/M33 port configuration. */
#define configENABLE_MPU 0

2
hw/bsp/board_mcu.h
View File

@ -130,6 +130,8 @@
#elif CFG_TUSB_MCU == OPT_MCU_RX63X
// no header needed
#elif CFG_TUSB_MCU == OPT_MCU_MM32F327X
#include "mm32_device.h"
#else
#error "Missing MCU header"
#endif

8
hw/bsp/mm32/boards/mm32f327x_mb39/board.mk Normal file
View File

@ -0,0 +1,8 @@
LD_FILE = $(BOARD_PATH)/flash.ld
SRC_S += $(SDK_DIR)/mm32f327x/MM32F327x/Source/GCC_StartAsm/startup_mm32m3ux_u_gcc.S
# For flash-jlink target
#JLINK_DEVICE = stm32f411ve
# flash target using on-board stlink
#flash: flash-jlink

0
hw/bsp/mm32/mm32f327x/flash.ld → hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld
View File

172
hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c Normal file
View File

@ -0,0 +1,172 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020 MM32 SE TEAM
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "mm32_device.h"
#include "hal_conf.h"
#include "tusb.h"
#include "../board.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void OTG_FS_IRQHandler (void)
{
tud_int_handler(0);
}
void USB_DeviceClockInit (void)
{
/* Select USBCLK source */
// RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1);
RCC->CFGR &= ~(0x3 << 22);
RCC->CFGR |= (0x1 << 22);
/* Enable USB clock */
RCC->AHB2ENR |= 0x1 << 7;
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
// LED
void board_led_write (bool state);
extern u32 SystemCoreClock;
const int baudrate = 115200;
void board_init (void)
{
// usb clock
USB_DeviceClockInit();
if ( SysTick_Config(SystemCoreClock / 1000) )
{
while ( 1 )
;
}
NVIC_SetPriority(SysTick_IRQn, 0x0);
// LED
GPIO_InitTypeDef GPIO_InitStruct;
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
GPIO_StructInit(&GPIO_InitStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource15, GPIO_AF_15); //Disable JTDI AF to AF15
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_15;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
board_led_write(true);
// UART
UART_InitTypeDef UART_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); //
//UART initialset
GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_7);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_7);
UART_StructInit(&UART_InitStruct);
UART_InitStruct.UART_BaudRate = baudrate;
UART_InitStruct.UART_WordLength = UART_WordLength_8b;
UART_InitStruct.UART_StopBits = UART_StopBits_1; //one stopbit
UART_InitStruct.UART_Parity = UART_Parity_No; //none odd-even verify bit
UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None; //No hardware flow control
UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; // receive and sent mode
UART_Init(UART1, &UART_InitStruct); //initial uart 1
UART_Cmd(UART1, ENABLE); //enable uart 1
//UART1_TX GPIOA.9
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
//UART1_RX GPIOA.10
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOA, &GPIO_InitStruct);
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write (bool state)
{
state ? (GPIO_ResetBits(GPIOA, GPIO_Pin_15)) : (GPIO_SetBits(GPIOA, GPIO_Pin_15));
}
uint32_t board_button_read (void)
{
return 0;
}
int board_uart_read (uint8_t *buf, int len)
{
(void) buf;
(void) len;
return 0;
}
int board_uart_write (void const *buf, int len)
{
const char *buff = buf;
while ( len )
{
while ( (UART1->CSR & UART_IT_TXIEN) == 0 )
; //The loop is sent until it is finished
UART1->TDR = (*buff & 0xFF);
buff++;
len--;
}
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
system_ticks++;
}
uint32_t board_millis (void)
{
return system_ticks;
}
#endif
// Required by __libc_init_array in startup code if we are compiling using
// -nostdlib/-nostartfiles.
void _init(void)
{
}

36
hw/bsp/mm32/family.mk Normal file
View File

@ -0,0 +1,36 @@
UF2_FAMILY_ID = 0x0
SDK_DIR = hw/mcu/mindmotion/mm32sdk
DEPS_SUBMODULES += lib/CMSIS_5 $(SDK_DIR)
include $(TOP)/$(BOARD_PATH)/board.mk
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m3 \
-mfloat-abi=soft \
-nostdlib -nostartfiles \
-DCFG_TUSB_MCU=OPT_MCU_MM32F327X
# suppress warning caused by vendor mcu driver
CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized
SRC_C += \
src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c \
$(SDK_DIR)/mm32f327x/MM32F327x/Source/system_mm32f327x.c \
$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_gpio.c \
$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_rcc.c \
$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_uart.c \
INC += \
$(TOP)/$(BOARD_PATH) \
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
$(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/Include \
$(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc
# For freeRTOS port source
FREERTOS_PORT = ARM_CM3
# flash target using on-board
flash: flash-jlink

161
hw/bsp/mm32/mm32f327x/mm32f327x_mb39.c
View File

@ -1,161 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020 MM32 SE TEAM
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "mm32_device.h"
#include "hal_conf.h"
#include "tusb.h"
#include "../board.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void OTG_FS_IRQHandler(void)
{
dcd_int_handler(TUD_OPT_RHPORT);
}
void USB_DeviceClockInit(void)
{
/* Select USBCLK source */
// RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1);
RCC->CFGR &= ~(0x3 << 22);
RCC->CFGR |= (0x1 << 22);
/* Enable USB clock */
RCC->AHB2ENR |= 0x1 << 7;
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
// LED
void board_led_write(bool state);
extern u32 SystemCoreClock;
const int baudrate = 115200;
void board_init(void)
{
// usb clock
USB_DeviceClockInit();
if (SysTick_Config(SystemCoreClock / 1000)) {
while (1);
}
NVIC_SetPriority(SysTick_IRQn, 0x0);
// LED
GPIO_InitTypeDef GPIO_InitStruct;
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE);
GPIO_StructInit(&GPIO_InitStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource15, GPIO_AF_15); //Disable JTDI AF to AF15
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_15;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
board_led_write(true);
// UART
UART_InitTypeDef UART_InitStruct;
RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock
RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); //
//UART initialset
GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_7);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_7);
UART_StructInit(&UART_InitStruct);
UART_InitStruct.UART_BaudRate = baudrate;
UART_InitStruct.UART_WordLength = UART_WordLength_8b;
UART_InitStruct.UART_StopBits = UART_StopBits_1;//one stopbit
UART_InitStruct.UART_Parity = UART_Parity_No;//none odd-even verify bit
UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None;//No hardware flow control
UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; // receive and sent mode
UART_Init(UART1, &UART_InitStruct); //initial uart 1
UART_Cmd(UART1, ENABLE); //enable uart 1
//UART1_TX GPIOA.9
GPIO_StructInit(&GPIO_InitStruct);
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
//UART1_RX GPIOA.10
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOA, &GPIO_InitStruct);
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
state ? (GPIO_ResetBits(GPIOA,GPIO_Pin_15)):(GPIO_SetBits(GPIOA,GPIO_Pin_15));
}
uint32_t board_button_read(void)
{
return 0;
}
int board_uart_read(uint8_t* buf, int len)
{
(void) buf; (void) len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
const char *buff = buf;
while(len){
while((UART1->CSR & UART_IT_TXIEN) == 0); //The loop is sent until it is finished
UART1->TDR = (*buff & 0xFF);
buff++;
len--;
}
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

6
src/class/cdc/cdc_device.h
View File

@ -82,7 +82,7 @@ int32_t tud_cdc_n_read_char (uint8_t itf);
void tud_cdc_n_read_flush (uint8_t itf);
// Get a byte from FIFO at the specified position without removing it
bool tud_cdc_n_peek (uint8_t itf, uint8_t* u8);
bool tud_cdc_n_peek (uint8_t itf, uint8_t* uv8);
// Write bytes to TX FIFO, data may remain in the FIFO for a while
uint32_t tud_cdc_n_write (uint8_t itf, void const* buffer, uint32_t bufsize);
@ -206,9 +206,9 @@ static inline void tud_cdc_read_flush (void)
tud_cdc_n_read_flush(0);
}
static inline bool tud_cdc_peek (uint8_t* u8)
static inline bool tud_cdc_peek (uint8_t* uv8)
{
return tud_cdc_n_peek(0, u8);
return tud_cdc_n_peek(0, uv8);
}
static inline uint32_t tud_cdc_write_char (char ch)

8
src/class/vendor/vendor_device.h vendored
View File

@ -44,7 +44,7 @@ bool tud_vendor_n_mounted (uint8_t itf);
uint32_t tud_vendor_n_available (uint8_t itf);
uint32_t tud_vendor_n_read (uint8_t itf, void* buffer, uint32_t bufsize);
bool tud_vendor_n_peek (uint8_t itf, uint8_t* u8);
bool tud_vendor_n_peek (uint8_t itf, uint8_t* uv8);
uint32_t tud_vendor_n_write (uint8_t itf, void const* buffer, uint32_t bufsize);
uint32_t tud_vendor_n_write_available (uint8_t itf);
@ -58,7 +58,7 @@ uint32_t tud_vendor_n_write_str (uint8_t itf, char const* str);
static inline bool tud_vendor_mounted (void);
static inline uint32_t tud_vendor_available (void);
static inline uint32_t tud_vendor_read (void* buffer, uint32_t bufsize);
static inline bool tud_vendor_peek (uint8_t* u8);
static inline bool tud_vendor_peek (uint8_t* uv8);
static inline uint32_t tud_vendor_write (void const* buffer, uint32_t bufsize);
static inline uint32_t tud_vendor_write_str (char const* str);
static inline uint32_t tud_vendor_write_available (void);
@ -94,9 +94,9 @@ static inline uint32_t tud_vendor_read (void* buffer, uint32_t bufsize)
return tud_vendor_n_read(0, buffer, bufsize);
}
static inline bool tud_vendor_peek (uint8_t* u8)
static inline bool tud_vendor_peek (uint8_t* uv8)
{
return tud_vendor_n_peek(0, u8);
return tud_vendor_n_peek(0, uv8);
}
static inline uint32_t tud_vendor_write (void const* buffer, uint32_t bufsize)

32
src/common/tusb_common.h
View File

@ -38,18 +38,18 @@
#define TU_MIN(_x, _y) ( ( (_x) < (_y) ) ? (_x) : (_y) )
#define TU_MAX(_x, _y) ( ( (_x) > (_y) ) ? (_x) : (_y) )
#define TU_U16_HIGH(u16) ((uint8_t) (((u16) >> 8) & 0x00ff))
#define TU_U16_LOW(u16) ((uint8_t) ((u16) & 0x00ff))
#define U16_TO_U8S_BE(u16) TU_U16_HIGH(u16), TU_U16_LOW(u16)
#define U16_TO_U8S_LE(u16) TU_U16_LOW(u16), TU_U16_HIGH(u16)
#define TU_U16_HIGH(_u16) ((uint8_t) (((_u16) >> 8) & 0x00ff))
#define TU_U16_LOW(_u16) ((uint8_t) ((_u16) & 0x00ff))
#define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16)
#define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16)
#define TU_U32_BYTE3(u32) ((uint8_t) ((((uint32_t) u32) >> 24) & 0x000000ff)) // MSB
#define TU_U32_BYTE2(u32) ((uint8_t) ((((uint32_t) u32) >> 16) & 0x000000ff))
#define TU_U32_BYTE1(u32) ((uint8_t) ((((uint32_t) u32) >> 8) & 0x000000ff))
#define TU_U32_BYTE0(u32) ((uint8_t) (((uint32_t) u32) & 0x000000ff)) // LSB
#define TU_U32_BYTE3(_u32) ((uint8_t) ((((uint32_t) _u32) >> 24) & 0x000000ff)) // MSB
#define TU_U32_BYTE2(_u32) ((uint8_t) ((((uint32_t) _u32) >> 16) & 0x000000ff))
#define TU_U32_BYTE1(_u32) ((uint8_t) ((((uint32_t) _u32) >> 8) & 0x000000ff))
#define TU_U32_BYTE0(_u32) ((uint8_t) (((uint32_t) _u32) & 0x000000ff)) // LSB
#define U32_TO_U8S_BE(u32) TU_U32_BYTE3(u32), TU_U32_BYTE2(u32), TU_U32_BYTE1(u32), TU_U32_BYTE0(u32)
#define U32_TO_U8S_LE(u32) TU_U32_BYTE0(u32), TU_U32_BYTE1(u32), TU_U32_BYTE2(u32), TU_U32_BYTE3(u32)
#define U32_TO_U8S_BE(_u32) TU_U32_BYTE3(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE0(_u32)
#define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32)
#define TU_BIT(n) (1UL << (n))
@ -88,13 +88,13 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u16(uint8_t high, uint8_t low)
return (uint16_t) ((((uint16_t) high) << 8) | low);
}
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte3(uint32_t u32) { return TU_U32_BYTE3(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte2(uint32_t u32) { return TU_U32_BYTE2(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte1(uint32_t u32) { return TU_U32_BYTE1(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte0(uint32_t u32) { return TU_U32_BYTE0(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte3(uint32_t uv32) { return TU_U32_BYTE3(uv32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte2(uint32_t uv32) { return TU_U32_BYTE2(uv32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte1(uint32_t uv32) { return TU_U32_BYTE1(uv32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte0(uint32_t uv32) { return TU_U32_BYTE0(uv32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_high(uint16_t u16) { return TU_U16_HIGH(u16); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_low (uint16_t u16) { return TU_U16_LOW(u16); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_high(uint16_t uv16) { return TU_U16_HIGH(uv16); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_low (uint16_t uv16) { return TU_U16_LOW(uv16); }
//------------- Bits -------------//
TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_bit_set (uint32_t value, uint8_t pos) { return value | TU_BIT(pos); }

2
src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c
View File

@ -283,7 +283,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
/* Response with status first before changing device address */
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
}
extern u32 SystemCoreClock ;
extern u32 SystemCoreClock;
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;