f6f0910778
hub clean up
2018-12-08 20:56:56 +07:00
d3ac4c14a3
refactor hcd api
2018-12-08 20:51:48 +07:00
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
98dd0c4d4d
clean up
2018-12-07 23:28:51 +07:00
e4fd9fbaf4
seperate control xfer to 3 tds for ohci
...
- ohci only work with 1st transfer with specific timing. TODO fix it
later
2018-12-07 23:16:06 +07:00
6c49848d59
ohci got device not response condition in control transfer
2018-12-07 22:01:26 +07:00
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
e6e3679136
simple cdc host demo work
2018-12-07 17:37:54 +07:00
13d08cd636
adding new hcd api, tested working with control xfer.
...
- hcd_edpt_open
- hcd_edpt_xfer
- hcd_edpt_xfer
2018-12-07 17:31:35 +07:00
9b74f0e98f
add connect to cdc for testing
2018-12-07 15:07:00 +07:00
366ab79776
able to build host hid
2018-12-07 14:57:58 +07:00
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
89820a36a1
able to build with host msc
2018-12-07 12:56:42 +07:00
9478c647e3
change usbh_control_xfer name and signature
2018-12-07 12:23:37 +07:00
c93fb23693
usbh rename vars
2018-12-07 00:47:16 +07:00
2fe9abe71f
change usbh queue to generic event queue
2018-12-06 23:45:24 +07:00
ac829c0a87
minor clean up
2018-12-06 22:56:58 +07:00
07c3fd5e1e
clean up hub
2018-12-06 22:47:49 +07:00
7d3ff7aff6
rename CFG_TUSB_HOST_CDC/MSC to CFG_TUH_CDC/MSC
2018-12-06 22:24:31 +07:00
5b09774ae0
clean up usbh, rename doxygen folder to docs
2018-12-06 21:46:34 +07:00
1d3583785f
change osal_semaphore_wait to return bool
2018-12-06 17:31:25 +07:00
5f7d7a34f5
able to complete enumeration with os none blocking
2018-12-06 00:38:00 +07:00
5a7493ed42
fix more host build error
2018-12-05 21:12:10 +07:00
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
4537ba66e5
fixing build error with host stack
2018-12-05 20:26:55 +07:00
27793cbd3d
fix travis build
2018-12-05 17:43:09 +07:00
d887829b4c
change usbd_init() return to bool for simplicity
2018-12-05 17:30:04 +07:00
3dc0653d70
clean up
2018-12-05 17:09:30 +07:00
6f3898572d
add role to OSAL_QUEUE_DEF() to disable correct dcd/hcd isr
2018-12-05 17:01:19 +07:00
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
804c60304e
adding ses lpc13xx
2018-11-30 13:25:58 +07:00
3c49bfb588
remove obsolete example
2018-11-30 13:05:20 +07:00
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
658c2ff570
rename
2018-11-30 12:56:09 +07:00
723e02780d
clean up
2018-11-30 12:51:54 +07:00
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
8b03b6d3b4
add Auto descriptor endpoint num config to support lpc17xx
...
CFG_TUD_DESC_*_EPNUM
2018-11-28 16:10:31 +07:00
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
47fabe42ed
One tweak to make -Wdiscarded-qualifiers happy.
2018-11-23 12:48:55 -08:00
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
246c28db1a
Turn off interrupts when working with the event queue.
2018-11-23 11:18:53 -08:00
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
394a22ecf7
remove pragma GCC diagnostic
2018-11-23 15:25:25 +07:00
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
a619ff88a3
rename xfer complete enum
2018-11-23 15:17:43 +07:00
cb8782e5f2
rename tusb_event_t to xfer_result_t
2018-11-23 15:14:47 +07:00
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
4e8400e6fb
more clean up
2018-11-22 21:58:06 +07:00
a1faf5c9cb
clean up dcd lpc43xx
2018-11-22 21:37:23 +07:00
569e85a0c0
cdc work ok with lpc43xx
2018-11-22 17:40:20 +07:00
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
4314be9aeb
msc device block count and block num
...
- replace CFG_TUD_MSC_BLOCK_NUM & CFG_TUD_MSC_BLOCK_SZ by
tud_msc_capacity_cb() (mandatory callback)
2018-11-22 12:11:06 +07:00
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
a0ce92bcfd
update dcd samd21
2018-11-21 13:01:39 +07:00
155edc7b00
fix ses irq vector
2018-11-21 12:36:28 +07:00
d036f62b0e
samd51 fix stable issue with dcd
2018-11-20 17:25:41 +07:00
c503d48ec4
clean up
2018-11-20 01:20:39 +07:00
hathach