hathach
3ab9c2f64a
add host ea4088qs, but not work
2018-12-07 22:00:34 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
5d4d3431c2
host port plugged isr detect, but control xfer not work
2018-12-06 00:10:49 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
d7c0f0aab5
clean up mcb1800
2018-12-04 13:32:59 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
819a03c14d
clean up
2018-12-03 23:46:28 +07:00
hathach
3a573fdd89
update pca10056, clean files
2018-12-03 23:39:34 +07:00
hathach
a39516e03d
update board metro0 and metro4
2018-12-03 23:33:40 +07:00
hathach
a9e015d619
forgot to add ea4357 files
2018-12-03 23:23:59 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
920d88d256
clean up
2018-12-03 20:34:32 +07:00
hathach
f614586964
clean up
2018-12-03 20:33:17 +07:00
hathach
68a0e866c5
ea4357 led
2018-12-03 20:32:24 +07:00
hathach
a9161ed0d7
clean up
2018-12-03 19:04:57 +07:00
hathach
cea9abd4d0
clean up lpc13
2018-12-03 19:02:35 +07:00
hathach
f8ea10dc9a
update board led to use only one led
2018-12-03 18:48:43 +07:00
hathach
5f10584983
moving lpc17xx to use lpcopen
2018-12-03 17:28:38 +07:00
hathach
f9ae8fa5d2
fix board issue with lpcxpresso 1347
2018-12-03 16:13:44 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
89d96b92af
fix lpc11u68 bsp issue, able to blink
2018-12-01 21:58:24 +07:00
hathach
102a761e8e
able to build lpc11u68
2018-12-01 02:17:20 +07:00
hathach
a157c7fdc9
add lpc11u68 ses file
2018-12-01 01:43:57 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
0bc80dc386
clean up
2018-11-29 23:49:08 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
hathach
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
hathach
3fe392414d
Merge branch 'develop' into devlocal
2018-11-29 20:02:16 +07:00
Scott Shawcroft
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
Scott Shawcroft
db42207fcd
Add a porting doc and make a pass over the others.
...
Fixes #5
2018-11-27 18:07:22 -08:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
Scott Shawcroft
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
hathach
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
hathach
b20cb8852a
build ok
2018-11-22 16:49:27 +07:00
hathach
c3c446f7db
adding lpc43xx to ses
2018-11-22 16:28:01 +07:00
hathach
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
hathach
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
hathach
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
hathach
5bccb234ee
samd21 has usb traffic
2018-11-21 12:24:18 +07:00
hathach
c5d9a477c0
samd21 metro m0 blink too fast, still have issue with clock init
2018-11-21 00:32:17 +07:00
hathach
eadcba75a2
has issue with metro m0 clock init
2018-11-21 00:19:38 +07:00
hathach
a46b42a54e
move metro m4 clock init to board
2018-11-21 00:12:11 +07:00
hathach
867d3cb02d
able to build and blink with metro m0
2018-11-20 23:49:37 +07:00
hathach
18f8217f4f
adding samd21 metro m0 support
2018-11-20 23:19:59 +07:00
hathach
5e65886fdd
samd51 metro m4 add init_mcu() and usb init
...
- device regconized on bus but doesnt response with setup packet.
- temp disable msc
2018-11-20 01:23:53 +07:00
hathach
ee399bd27b
add sand51 project to ses
2018-11-14 15:25:58 +07:00
hathach
eea1f8597e
added board led for metro m4
2018-11-14 13:28:39 +07:00
hathach
4b1f4c7b6f
add Adafruit samd-peripherals as submodule.
...
clean up board
2018-11-14 00:22:49 +07:00
hathach
2e2100078c
adding Adafruit metro m0/m4 express
2018-11-13 22:49:37 +07:00
hathach
3fe7cd1659
added tud_cdc_write_str, tu_fifo only use mutex for RTOS config
2018-11-13 15:45:22 +07:00
hathach
5a046799f6
clean up board.h
2018-11-13 12:32:15 +07:00
hathach
2891ff486a
simplify qspi flash with blocking API
2018-10-23 19:54:06 +07:00
hathach
a660fb0cfc
clean up, update nrfx to 1.3.0
2018-09-25 12:57:46 +07:00
hathach
3b79ba8451
update qspi
2018-09-11 22:37:44 +07:00
hathach
154daf584c
better qspi
2018-09-08 16:39:42 +07:00
hathach
8572947da5
qspi msc flash seems to work
2018-09-08 00:15:34 +07:00
hathach
a0ae452987
rename example files
2018-09-07 17:28:25 +07:00
hathach
d18a9e8759
freertos blinky with software timer
2018-08-23 14:11:21 +07:00
hathach
5dd02cbdd3
house keeping
2018-07-27 16:59:57 +07:00
hathach
546f2a1165
nrf52840 example work with boot keyboard
2018-07-24 00:10:22 +07:00
hathach
4342325ee1
reworking device hid class driver
2018-07-23 15:25:45 +07:00
hathach
142300ca60
remove sdk, add nrfx as submodule
...
update segger project to work with nrfx
2018-07-02 11:00:05 +07:00
hathach
19eb62ebe4
update auto descriptor
2018-07-01 15:45:04 +07:00
hathach
1d428b7fef
get nrf5x hal work with SD and non_SD configure
2018-05-15 12:37:48 +07:00
hathach
29071c10b1
rename CFG_TUSB_CONTROLLER_0_MODE to CFG_TUSB_RHPORT0_MODE
2018-04-14 14:08:48 +07:00
hathach
3d31f92106
rename OPT_MODE_
2018-04-12 13:17:58 +07:00
hathach
18f97fef7e
rename TUSB_OS_NONE, TUSB_OS_FREERTOS to OPT_OS_NONE, OPT_OS_FREERTOS
2018-04-12 12:55:53 +07:00
hathach
3c24671960
mass rename TUSB_CFG to CFG_TUSB
2018-04-10 14:31:11 +07:00
hathach
82da013dad
get freertos build
2018-03-30 15:33:36 +07:00
hathach
97db3c7c3d
update nrf52 hal millis
2018-03-29 18:10:01 +07:00
hathach
e2f9744369
rename tusb_hal_tick_get to tusb_hal_millis
...
rename TUSB_CFG_TICKS_HZ to BOARD_TICKS_HZ
2018-03-29 18:03:04 +07:00
hathach
0fdec33521
wrap up nrf52 demo
2018-03-20 20:57:49 +07:00
hathach
9f5fcb64ed
update code, remove nrf_drv_clock dependency
2018-03-20 19:52:21 +07:00
hathach
ffca1f5e64
working on nrf52
2018-03-13 16:30:53 +07:00
hathach
fd250b92cb
clean up example
2018-03-11 14:37:01 +07:00
hathach
0384e40320
rename hal_* to tusb_hal_*
2018-03-11 13:01:57 +07:00
hathach
23caef859c
adding nrf52840 port, able to blink led with pca10056
2018-03-11 00:16:10 +07:00
hathach
3e42845153
segger studio work with ea4357
2018-03-09 16:22:10 +07:00
hathach
4ddac8bc88
enhance cdc device API
2018-03-08 14:47:48 +07:00
hathach
bd5f9ecdec
rename tusb_tick_get to hal_tick_get
2018-03-07 23:40:54 +07:00
hathach
7092db264f
update
2018-03-07 15:30:32 +07:00
hathach
889169d4d0
add new example device_virtual_com
2018-03-07 13:25:41 +07:00
hathach
299c92f2fc
more hal clean up
2018-03-02 18:38:29 +07:00
hathach
5b110f9f58
move files around
2018-03-02 18:13:35 +07:00
hathach
b5f17fd823
move startup to bsp folder
2018-03-02 14:59:55 +07:00
hathach
dbe5ff2a35
re-org bsp
2018-03-02 14:53:40 +07:00
hathach
fd174ede41
changing bsp files
2018-03-02 14:51:51 +07:00
hathach
0a8cf7de47
rename boards to bsp
2018-03-02 13:49:24 +07:00