kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

working on nrf52

This commit is contained in:
hathach 2018-03-13 16:30:53 +07:00
parent 2435abb0a8
commit ffca1f5e64
20 changed files with 186 additions and 100 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
examples/device/device_virtual_com/src/main.c
View File

@ -114,7 +114,7 @@ void led_blinking_task(void)
{
enum { BLINK_INTEVAL = 1000 };
static uint32_t led_on_mask = 0;
static bool led_state = false;
static uint32_t last_blink = 0;
// not enough time
@ -122,8 +122,8 @@ void led_blinking_task(void)
last_blink += BLINK_INTEVAL;
board_leds(led_on_mask, 1 - led_on_mask);
led_on_mask = 1 - led_on_mask; // toggle
board_led_control(BOARD_LED0, led_state);
led_state = 1 - led_state; // toggle
}
//--------------------------------------------------------------------+

20
examples/device/device_virtual_com/xpresso/.project
View File

@ -40,4 +40,24 @@
<locationURI>PARENT-4-PROJECT_LOC/tinyusb</locationURI>
</link>
</linkedResources>
<filteredResources>
<filter>
<id>1520932840443</id>
<name></name>
<type>22</type>
<matcher>
<id>org.eclipse.ui.ide.multiFilter</id>
<arguments>1.0-name-matches-false-false-*.d</arguments>
</matcher>
</filter>
<filter>
<id>1520932840444</id>
<name></name>
<type>22</type>
<matcher>
<id>org.eclipse.ui.ide.multiFilter</id>
<arguments>1.0-name-matches-false-false-*.o</arguments>
</matcher>
</filter>
</filteredResources>
</projectDescription>

8
examples/device/nrf52840/src/main.c
View File

@ -63,7 +63,7 @@ int main(void)
board_init();
print_greeting();
//tusb_init();
tusb_init();
while (1)
{
@ -114,7 +114,7 @@ void led_blinking_task(void)
{
enum { BLINK_INTEVAL = 1000 };
static uint32_t led_on_mask = 0;
static bool led_state = false;
static uint32_t last_blink = 0;
// not enough time
@ -122,8 +122,8 @@ void led_blinking_task(void)
last_blink += BLINK_INTEVAL;
board_leds(led_on_mask, 1 - led_on_mask);
led_on_mask = 1 - led_on_mask; // toggle
board_led_control(BOARD_LED0, led_state);
led_state = 1 - led_state; // toggle
}
//--------------------------------------------------------------------+

35
hw/bsp/board.h
View File

@ -131,13 +131,21 @@
/// Initialize all required peripherals on board including uart, led, buttons etc ...
void board_init(void);
/** \brief Turns on and off leds on the board
* \param[in] on_mask Bitmask for LED's numbers is turning ON
* \param[out] off_mask Bitmask for LED's numbers is turning OFF
* \note the \a on_mask is more priority then \a off_mask, if an led's number is present on both.
* It will be turned ON.
*/
void board_leds(uint32_t on_mask, uint32_t off_mask);
#define BOARD_LED0 0
void board_led_control(uint32_t led_id, bool state);
static inline void board_led_on(uint32_t led_id)
{
board_led_control(led_id, true);
}
static inline void board_led_off(uint32_t led_id)
{
board_led_control(led_id, false);
}
/** \brief Get the current state of the buttons on the board
* \return Bitmask where a '1' means active (pressed), a '0' means inactive.
@ -156,19 +164,6 @@ void board_uart_putchar(uint8_t c);
/** @} */
#if 0
//------------- Board Application -------------//
void led_blinking_task(void* param);
/// Initialize the LED blinking task application. The initial blinking rate is 1 Hert (1 per second)
void led_blinking_init(void);
/** \brief Change the blinking rate.
* \param[in] ms The interval between on and off.
*/
void led_blinking_set_interval(uint32_t ms);
#endif
#ifdef __cplusplus
}
#endif

6
hw/bsp/ea4357/board_ea4357.c
View File

@ -116,9 +116,11 @@ void board_init(void)
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
void board_led_control(uint32_t id, bool state)
{
pca9532_setLeds( on_mask << 8, off_mask << 8);
uint16_t on_mask = state ? (1 << id) : 0;
uint16_t off_mask = state ? 0 : (1 << id);
pca9532_setLeds( on_mask << 8, off_mask << 8 );
}
//--------------------------------------------------------------------+

2
hw/bsp/ea4357/board_ea4357.h
View File

@ -53,6 +53,8 @@
#include "oem_base_board/pca9532.h" // LEDs
#define BOARD_LED_NUM 1
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART

14
hw/bsp/pca10056/board_pca10056.c
View File

@ -43,6 +43,7 @@
*------------------------------------------------------------------*/
#define LED_1 13
#define LED_STATE_ON 0
#define LED_STATE_OFF (1-LED_STATE_ON)
/*------------------------------------------------------------------*/
@ -60,17 +61,10 @@ void board_init(void)
NVIC_EnableIRQ(SysTick_IRQn);
}
void board_leds(uint32_t on_mask, uint32_t off_mask)
void board_led_control(uint32_t led_id, bool state)
{
if (on_mask)
{
nrf_gpio_pin_write(LED_1, LED_STATE_ON);
}
if ( off_mask)
{
nrf_gpio_pin_write(LED_1, 1-LED_STATE_ON);
}
(void) led_id;
nrf_gpio_pin_write(LED_1, state ? LED_STATE_ON : LED_STATE_OFF);
}
uint32_t board_buttons(void)

1
hw/bsp/pca10056/board_pca10056.h
View File

@ -42,6 +42,7 @@
extern "C" {
#endif
#define BOARD_LED_NUM 1
#ifdef __cplusplus
}

67
hw/mcu/nordic/nrf52/tusb_port/dcd_nrf52.c Normal file
View File

@ -0,0 +1,67 @@
/**************************************************************************/
/*!
@file dcd_nrf52.c
@author hathach
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2018, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************/
// TODO remove
#include "nrf.h"
#include "nrf_power.h"
#include "nrf_drv_usbd.h"
/*------------------------------------------------------------------*/
/* MACRO TYPEDEF CONSTANT ENUM
*------------------------------------------------------------------*/
/*------------------------------------------------------------------*/
/* VARIABLE DECLARATION
*------------------------------------------------------------------*/
/*------------------------------------------------------------------*/
/* Controller API
*------------------------------------------------------------------*/
bool tusb_dcd_init (uint8_t port)
{
// TODO USB power detection
nrf_power_int_enable(
NRF_POWER_INT_USBDETECTED_MASK |
NRF_POWER_INT_USBREMOVED_MASK |
NRF_POWER_INT_USBPWRRDY_MASK);
nrf_drv_usbd_enable();
}
void tusb_dcd_connect (uint8_t port);
void tusb_dcd_disconnect (uint8_t port);
void tusb_dcd_set_address (uint8_t port, uint8_t dev_addr);
void tusb_dcd_set_config (uint8_t port, uint8_t config_num);

45
hw/bsp/board.c → hw/mcu/nordic/nrf52/tusb_port/dcd_nrf52.h
View File

@ -1,13 +1,13 @@
/**************************************************************************/
/*!
@file board.c
@author hathach (tinyusb.org)
@file dcd_nrf52.h
@author hathach
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
Copyright (c) 2018, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
@ -26,38 +26,25 @@
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#ifndef DCD_NRF52_H_
#define DCD_NRF52_H_
#include "board.h"
//#include "app_os_prio.h"
#if TUSB_CFG_OS == TUSB_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
system_ticks++;
}
uint32_t tusb_hal_tick_get(void)
{
return system_ticks;
}
#ifdef __cplusplus
extern "C" {
#endif
// TODO remove legacy cmsis code
void check_failed(uint8_t *file, uint32_t line)
{
(void) file;
(void) line;
}
#ifdef __cplusplus
}
#endif
#endif /* DCD_NRF52_H_ */

6
hw/mcu/nordic/nrf52/tusb_port/hal_nrf52.c
View File

@ -62,16 +62,16 @@ void SysTick_Handler (void)
bool tusb_hal_init(void)
{
return true;
}
void tusb_hal_init_enable(uint8_t port)
void tusb_hal_int_enable(uint8_t port)
{
(void) port;
NVIC_EnableIRQ(USBD_IRQn);
}
void tusb_hal_init_disable(uint8_t port)
void tusb_hal_int_disable(uint8_t port)
{
(void) port;
NVIC_DisableIRQ(USBD_IRQn);

4
hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c
View File

@ -41,13 +41,13 @@
#if TUSB_CFG_MCU == MCU_LPC11UXX
void tusb_hal_init_enable(uint8_t port)
void tusb_hal_int_enable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_EnableIRQ(USB_IRQn);
}
void tusb_hal_init_disable(uint8_t port)
void tusb_hal_int_disable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_DisableIRQ(USB_IRQn);

4
hw/mcu/nxp/lpc13uxx/hal_mcu/hal_lpc13uxx.c
View File

@ -41,13 +41,13 @@
#if TUSB_CFG_MCU == MCU_LPC13UXX
void tusb_hal_init_enable(uint8_t port)
void tusb_hal_int_enable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_EnableIRQ(USB_IRQ_IRQn);
}
void tusb_hal_init_disable(uint8_t port)
void tusb_hal_int_disable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_DisableIRQ(USB_IRQ_IRQn);

10
hw/mcu/nxp/lpc175x_6x/hal_mcu/hal_lpc175x_6x.c
View File

@ -41,13 +41,13 @@
#if TUSB_CFG_MCU == MCU_LPC175X_6X
void tusb_hal_init_enable(uint8_t port)
void tusb_hal_int_enable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_EnableIRQ(USB_IRQn);
}
void tusb_hal_init_disable(uint8_t port)
void tusb_hal_int_disable(uint8_t port)
{
(void) port; // discard compiler's warning
NVIC_DisableIRQ(USB_IRQn);
@ -111,4 +111,10 @@ void USB_IRQHandler(void)
#endif
}
void check_failed(uint8_t *file, uint32_t line)
{
(void) file;
(void) line;
}
#endif

3
hw/mcu/nxp/lpc43xx/tusb_port/dcd_lpc43xx.c
View File

@ -160,6 +160,9 @@ bool tusb_dcd_init(uint8_t port)
lpc_usb->USBCMD_D &= ~0x00FF0000; // Interrupt Threshold Interval = 0
lpc_usb->USBCMD_D |= BIT_(0); // connect
// enable interrupt
NVIC_EnableIRQ(port ? USB1_IRQn : USB0_IRQn);
return true;
}

27
hw/mcu/nxp/lpc43xx/tusb_port/hal_lpc43xx.c
View File

@ -53,6 +53,22 @@ enum {
LPC43XX_USBMODE_VBUS_HIGH = 1
};
#if TUSB_CFG_OS == TUSB_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
system_ticks++;
}
uint32_t tusb_hal_tick_get(void)
{
return system_ticks;
}
#endif
void tusb_hal_dbg_breakpoint(void)
{
// M0 cannot check if debugger is attached or not
@ -65,12 +81,12 @@ void tusb_hal_dbg_breakpoint(void)
#endif
}
void tusb_hal_init_enable(uint8_t port)
void tusb_hal_int_enable(uint8_t port)
{
NVIC_EnableIRQ(port ? USB1_IRQn : USB0_IRQn);
}
void tusb_hal_init_disable(uint8_t port)
void tusb_hal_int_disable(uint8_t port)
{
NVIC_DisableIRQ(port ? USB1_IRQn : USB0_IRQn);
}
@ -167,4 +183,11 @@ void USB1_IRQHandler(void)
}
#endif
void check_failed(uint8_t *file, uint32_t line)
{
(void) file;
(void) line;
}
#endif

6
tinyusb/osal/osal_none.h
View File

@ -204,11 +204,11 @@ static inline void osal_queue_flush(osal_queue_t const queue_hdl)
else\
return TUSB_ERROR_OSAL_WAITING;\
} else{\
/*TODO mutex lock tusb_hal_init_disable */\
/*TODO mutex lock tusb_hal_int_disable */\
memcpy(p_data, queue_hdl->buffer + (queue_hdl->rd_idx * queue_hdl->item_size), queue_hdl->item_size);\
queue_hdl->rd_idx = (queue_hdl->rd_idx + 1) % queue_hdl->depth;\
queue_hdl->count--;\
/*TODO mutex unlock tusb_hal_init_enable */\
/*TODO mutex unlock tusb_hal_int_enable */\
*(p_error) = TUSB_ERROR_NONE;\
}\
}while(0)
@ -258,7 +258,7 @@ static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl)
else\
return TUSB_ERROR_OSAL_WAITING;\
} else{\
if (sem_hdl->count) sem_hdl->count--; /*TODO mutex tusb_hal_init_disable consideration*/\
if (sem_hdl->count) sem_hdl->count--; /*TODO mutex tusb_hal_int_disable consideration*/\
*(p_error) = TUSB_ERROR_NONE;\
}\
}while(0)

8
tinyusb/tusb.c
View File

@ -52,14 +52,6 @@ tusb_error_t tusb_init(void)
ASSERT_STATUS ( usbd_init() ); // device stack init
#endif
#if (TUSB_CFG_CONTROLLER_0_MODE)
tusb_hal_init_enable(0);
#endif
#if (TUSB_CFG_CONTROLLER_1_MODE)
tusb_hal_init_enable(1);
#endif
return TUSB_ERROR_NONE;
}

3
tinyusb/tusb_dcd.h
View File

@ -43,8 +43,7 @@
#ifndef _TUSB_DCD_H_
#define _TUSB_DCD_H_
#include <stdint.h>
#include <stdbool.h>
#include "common/tusb_common.h"
#ifdef __cplusplus
extern "C" {

11
tinyusb/tusb_hal.h
View File

@ -46,12 +46,7 @@ extern "C" {
//--------------------------------------------------------------------+
// INCLUDES
//--------------------------------------------------------------------+
#include "tusb_option.h"
#include <stdbool.h>
#include <stdint.h>
#include "common/tusb_errors.h"
#include "common/compiler/compiler.h"
#include "common/tusb_common.h"
//--------------------------------------------------------------------+
// HAL API
@ -73,12 +68,12 @@ bool tusb_hal_init(void);
/** \brief Enable USB Interrupt on a specific USB Controller
* \param[in] port is a zero-based index to identify USB controller's ID
*/
void tusb_hal_init_enable(uint8_t port);
void tusb_hal_int_enable(uint8_t port);
/** \brief Disable USB Interrupt on a specific USB Controller
* \param[in] port is a zero-based index to identify USB controller's ID
*/
void tusb_hal_init_disable(uint8_t port);
void tusb_hal_int_disable(uint8_t port);
uint32_t tusb_hal_tick_get(void);