hathach
b35acbdcb2
add some doxygen
2013-12-10 10:57:59 +07:00
hathach
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
hathach
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
hathach
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
hathach
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
hathach
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
hathach
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
hathach
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
hathach
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
hathach
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
hathach
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
hathach
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
hathach
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
hathach
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
hathach
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
hathach
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
hathach
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
hathach
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
hathach
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
hathach
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
hathach
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
hathach
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
hathach
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
hathach
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
hathach
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
hathach
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
hathach
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
hathach
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
hathach
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
hathach
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
hathach
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
hathach
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
hathach
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
hathach
3a37dd66cc
refractor hid device
...
add check dcd_pipe_open if endpoint is already used
refractor usbd : parse and auto open class driver
2013-10-30 14:13:06 +07:00
hathach
b8a7ea6d46
add dcd control pipe stall protocol
2013-10-30 12:52:25 +07:00
hathach
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
hathach
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
hathach
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
hathach
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
hathach
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
hathach
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
hathach
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
hathach
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
hathach
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
hathach
eb39d88360
rndis document
2013-10-27 15:42:31 +07:00
hathach
f941f88549
rndis document
2013-10-27 15:15:28 +07:00
hathach
76e993c45c
rndis document
2013-10-26 20:25:14 +07:00
hathach
dae4fdc04f
cdc document
2013-10-26 20:12:39 +07:00
hathach
acd69a7692
document msc
2013-10-26 19:14:06 +07:00
hathach
621cdc7013
doxygen document for msc
2013-10-26 14:12:45 +07:00
hathach
d1d2bbdf5d
update doxygen
2013-10-26 12:42:27 +07:00
hathach
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
hathach
6c629a18fc
partially document CDC & RNDIS
2013-10-24 17:26:06 +07:00
hathach
5f584384eb
document msc host
2013-10-24 16:47:18 +07:00
hathach
d8d00ca768
refractor HID document
2013-10-24 15:48:57 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
hathach
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
hathach
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
hathach
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
hathach
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
hathach
09724c5d11
refractor msch
2013-09-26 00:17:45 +07:00
hathach
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
hathach
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
hathach
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
hathach
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
hathach
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
hathach
09dd83c05b
add set msg & get set cmplt for OID_GEN_CURRENT_PACKET_FILTER (default = 0 reject all) to
...
○ NDIS_PACKET_TYPE_DIRECTED
○ NDIS_PACKET_TYPE_MULTICAST
○ NDIS_PACKET_TYPE_BROADCAST
2013-09-11 15:03:37 +07:00
hathach
d3e83bc802
print out mac address
2013-07-19 12:08:04 +07:00
hathach
a522263a9d
add implementation for
...
- tusbh_cdc_rndis_is_mounted
- tusbh_cdc_rndis_get_mac_addr
2013-07-19 02:30:22 +07:00
hathach
ce865721a5
add test & code to send rndis msg query for permanent address (MAC address)
2013-07-19 01:52:56 +07:00
hathach
3b12917fb0
extract send message & wait & get complete message to send_message_get_response_subtask
2013-07-14 08:33:39 +07:00
hathach
03873135a9
add some required NDIS OID define
2013-07-13 00:11:17 +07:00
hathach
0e14752c81
pass the initialize_cmplt
2013-07-06 19:06:30 +07:00
hathach
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
hathach
355fd7e648
adding subclass RNDIS-CDC driver API
...
- implement init
- close
- xfer_isr
- open
adding waiting for notification after send rndis_initalize_msg
2013-07-05 16:22:42 +07:00
hathach
7345a4515d
fix bug with rndis overshadow the normal cdc callback
2013-07-05 13:37:57 +07:00
hathach
374aea7a11
change usbh_control_xfer_subtask to use flat API instead of passing tusb_control_request_t struct
2013-07-05 13:23:42 +07:00
hathach
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
hathach
391e132d6b
no big deal, only rename tusb_std_request_t to tusb_control_request_t
2013-07-04 12:25:39 +07:00
hathach
d3aed01874
add some printf when a class is mounted
...
add initial tests for rndis
2013-07-04 10:47:31 +07:00
hathach
c5afb9d50f
change class (hid/cdc) _mounted_isr to _mounted_cb
2013-07-04 09:45:20 +07:00
hathach
4a8686e868
adding _mounted_isr & _umounted_isr callback for host keyboard & mouse
...
remove TUSB_EVENT_INTERFACE_OPEN & TUSB_EVENT_INTERFACE_CLOSE
2013-07-03 12:46:12 +07:00
hathach
b0f45b3651
temporarily check cdc mounted by pipe_in & pipe_out
...
add tests for tusbh_cdc_xfer_isr
2013-07-03 12:06:07 +07:00
hathach
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00