9cba9a753b
update s3 devkitm with max3421 pin following metro s3, check max3421 version to make sure it is valid
2023-10-27 17:40:53 +07:00
27a2c8cba4
adding nulceo stm32u5a5, fix clock configure issue
...
dwc2 core stuck at reset
2023-10-18 18:43:07 +07:00
5025e80c9e
adding u5a5 nucleo
2023-10-18 15:27:06 +07:00
a5a77af11e
add board.mk for u575 nucleo
2023-10-17 23:53:09 +07:00
22aefd6aba
add cmake support for u575 nucleo
2023-10-17 22:48:54 +07:00
80ee307244
Merge branch 'master' into feat-stm32u575_nucleo
2023-10-17 22:31:33 +07:00
ce627f4318
feat(ch32f20x): add support of ch32f20x
2023-10-06 13:04:54 +03:00
cfb683f481
tested with nrf52840 and esp32s2
2023-10-05 17:01:41 +07:00
67e34267a6
change tuh_max3421_spi_xfer_api() signature
...
tested working with sam d21 and d51, not tested with nrf52, seem not
working with esp32
2023-10-04 18:00:32 +07:00
f36e0b7b92
esp32 comment out uart, increase max3421 spi speed to 26mhz
2023-10-03 16:27:35 +07:00
8348631bf5
improve esp32 ci, build esp32 with -DDMAX3421_HOST=1 for max3421 testing
...
revert change in hcd.h
2023-09-28 16:15:31 +07:00
6b8933cfe8
fix build with new freertos host example
2023-09-28 12:55:59 +07:00
7dc1a66f91
esp32 cdc host with max3421 work well
2023-09-28 11:12:22 +07:00
10abece264
esp32 hid device work well
2023-09-28 10:06:10 +07:00
3a10b6a3d5
fix esp32 build
2023-09-27 18:09:19 +07:00
76c43a5bdc
Merge branch 'master' into add-max3421-esp32
2023-09-27 17:52:18 +07:00
68c4009bba
Merge branch 'master' into add-in_isr-to-hcd_int_hanlder
2023-09-27 17:01:40 +07:00
58c49cea5b
remove sct_neopixel from lpc54 (due to warnings and not used)
2023-09-27 16:31:46 +07:00
0a4fb6963d
fix build with lpc54
2023-09-27 16:19:39 +07:00
3b0ffd0f48
change hcd_int_handler(rhport, in_isr) signature: add in_isr
...
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
2023-09-27 15:51:03 +07:00
6dc64eaa28
max3421 communication work with esp32 up to enumeration, seems still have a bit of issue
2023-09-27 12:34:45 +07:00
2f6592de7f
update max3421 to have hcd_int_handler_ext()
2023-09-27 11:30:18 +07:00
f6ca86c3dd
tested cdc_msc_hid_freertos with samd51
...
add -Wno-error=format for espressif
wrap up cdc_msc_hid_freertos
2023-09-26 19:09:36 +07:00
a7c136c03f
adding host/cdc_msc_hid_freertos example
2023-09-25 16:53:11 +07:00
b73262be3a
minor indent
2023-09-19 18:38:47 +07:00
8cdcd0fa9d
fix build and add u5 to ci
2023-09-19 18:35:15 +07:00
71a2e8a36d
addding cmake support for u5
2023-09-19 17:59:38 +07:00
81cd995108
add default CFG_TUH_MAX3421 = 0, default spi speed for samd21/samd51 to 12Mhz
2023-09-18 22:15:31 +07:00
46f7cf4da2
Merge pull request #2235 from slark-yuxj/master
...
fix:Resource leak: fp
2023-09-12 17:43:14 +07:00
f55052b61f
enable max3421 host for feather nrf52840 with makefile
2023-09-11 16:44:06 +07:00
1eb0cb0c65
update readme to include max3421 support
2023-09-11 15:45:26 +07:00
ab9585401b
wrap up build cmake & make support for max3421, to enable the Host driver, 'MAX3421_HOST=1' must be added as part of make/cmake command
2023-09-11 11:35:51 +07:00
e32c1e08bd
both samd21/d51 works perfectly with max3421e
2023-09-09 16:50:16 +07:00
605ad73ec0
refactor max3421_init() for samd51 to be generic for sercom and eic
2023-09-09 13:04:36 +07:00
c074488f75
minor rename
2023-09-09 12:20:16 +07:00
1d68f2a328
metro m4 working with max3421e
2023-09-08 18:39:09 +07:00
bcc77a60e0
get spi working for metro m4 express
2023-09-08 17:40:00 +07:00
ed102a7795
Merge branch 'master' into add-max3421e-hcd
2023-09-07 21:42:46 +07:00
d3c08ecc3a
more ci fix
2023-09-07 17:20:07 +07:00
e8558458c4
fix ci
2023-09-07 17:09:25 +07:00
2dea4ce6a2
add cmake support for samd21.
...
update ci cmake
2023-09-07 16:58:40 +07:00
bb5d43e9c5
add samd51 to cmake
2023-09-07 15:31:43 +07:00
21ab40bab2
- wrap up hcd max3421, work well with nrf52840
...
- also add usbh_defer_func()
2023-09-07 12:38:18 +07:00
c4566c4d2b
Enable instruction cache for stm32u5 boards
2023-09-05 21:39:28 -04:00
4fb15f6bb7
Add stm32u575-nucleo support
2023-09-05 19:30:38 -04:00
3b7d5aa042
improve connection & disconnection detection. But there is still issue when CONDETIRQ occurs but we are disabled interrupt (for osal queue access).
2023-08-31 16:52:09 +07:00
1ab488eb06
call xfer_complete_isr() when result is not successful (stalled or failed)
2023-08-30 16:04:18 +07:00
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
c350616038
fix:Resource leak: fp
...
Signed-off-by: yuxiaojun <yuxiaojun1011@outlook.com>
2023-08-28 15:24:14 +08:00
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
3ed5d6c372
complete enumeration
2023-08-24 16:27:12 +07:00
e3f3179924
able to get 8 byte descriptor, but read(RCVBC) always return 0
...
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
274578ff46
able to send setup packet
2023-08-22 23:17:12 +07:00
cacc96b25d
adding connection event handling, add nrf gpio interrupt for max2341e interrupt pin
2023-08-18 17:39:10 +07:00
824e585e2b
ground works for hcd max3421e
2023-08-18 14:07:38 +07:00
9257a0f562
- update nrf52 bsp for cmake
...
- add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled
- add hcd_template.c
2023-08-18 12:48:12 +07:00
088180e3d8
add iar support for lpc43, add lpcxpresso43s67 to hil farm
2023-08-14 20:58:00 +07:00
78e5b2c6a4
add board_get_unique_id() for lpc43
2023-08-14 16:52:16 +07:00
202b945f88
add lpcxpresso43s67
2023-08-14 16:38:51 +07:00
04f0cd5c80
Merge pull request #2209 from HiFiPhile/hitl
...
Enhance HITL test
2023-08-09 20:20:46 +07:00
1268d1a093
update hil test and json (remove troublesome lpc54608), run hil test on ci with IAR build
2023-08-09 18:46:23 +07:00
b8b01c1075
update to dcd ip3511 to add work-around for lpc54628 usb hs errata USB.1 and USB.2
...
msc is mounted, but device couldn't work reliably and got constant reset
due to other errata probably.
2023-08-09 12:47:24 +07:00
6d877c3170
added cmake for lpc54, update lpc55
2023-08-08 18:50:24 +07:00
4938971aad
code format
2023-08-07 20:48:09 +07:00
accc3fd737
Merge pull request #2151 from kilograham/rp2040_build_fixes
...
Fix build issues when building for RP2040 from pico-examples/pico-sdk.
2023-08-07 11:14:04 +07:00
b9e614bd39
Fix LPC54 build.
2023-08-06 15:59:25 +02:00
4f96eebe1b
Fix LPC54 build.
2023-08-06 13:41:10 +02:00
25bace5e81
add cmake for all board in stm32f4. fix build, also move ci for f4 from makefile to cmake
2023-08-04 12:49:26 +07:00
81aca17d6e
Merge branch 'master' into blackf407VE
2023-08-04 12:07:39 +07:00
de4ad2c775
Merge pull request #2204 from hathach/enhance-bsp
...
Enhance bsp
2023-08-04 11:41:44 +07:00
bbdc879995
Merge pull request #2133 from greatscottgadgets/cynthion_support
...
Update support for Cynthion boards
2023-08-04 11:03:25 +07:00
ef5bd9ee6c
Merge branch 'master' into enhance-bsp
2023-08-04 00:31:12 +07:00
9360a3bd51
add uid for some stm32
2023-08-04 00:23:10 +07:00
041f510f90
add board_get_unique_id() for serial number
...
implemented board_get_unique_id() for rp2040 and L4
2023-08-03 20:42:34 +07:00
6d03bb9ffc
Merge pull request #2052 from arduino/renesas_ra_hs_rebased
...
Renesas_RA: add support for board with HS USB port
2023-08-03 20:41:13 +07:00
1324c2862d
more board_api rename
2023-08-03 17:32:15 +07:00
a160da1f2b
add lpc43 family
2023-08-03 17:19:47 +07:00
a5768f52b4
more board_api.h rename
2023-08-03 15:50:52 +07:00
cf91660cee
rename hw/bsp/board.h to board_api.h
2023-08-03 15:44:05 +07:00
4493b838d9
rename ch32v307 and tm4c123 to use underscore
2023-08-03 15:35:01 +07:00
37a7f9f382
configQUEUE_REGISTRY_SIZE=4 for lpc18
2023-08-03 12:07:28 +07:00
473f37df95
add osal queue name if needed
...
also mass change configQUEUE_REGISTRY_SIZE = 4
2023-08-03 12:05:21 +07:00
2021c62997
fix pre-commit, also skip lto for rp2040
2023-08-02 17:57:28 +07:00
07822979aa
Fix STM32G0 build.
2023-08-01 18:41:15 +02:00
47ae883ba0
fix build with -flto
2023-08-01 17:26:56 +07:00
04f1a34c39
add rusb2_common.c for dynami irq
2023-08-01 17:03:07 +07:00
40833b585b
enable flto for ra makefile
...
- remove ra from ci make build since it is already in cmake ci
2023-08-01 15:44:54 +07:00
789e478d4d
add portenta c33 bsp, add flash by dfu-util
2023-08-01 13:16:37 +07:00
1cccbaf7ec
fix board name with dash
2023-08-01 11:18:00 +07:00
3f788a4e5a
enable USBMC for uno r4, add board_init_after_tusb() API
...
add BOARD_UPPERCASE for board detection
2023-07-31 19:09:40 +07:00
0d9973ef87
enable_irq since uno bootloader can disable it. systick triggered, however usb still not work with uno
2023-07-31 16:21:19 +07:00
feb58ebd54
add uno r4 wih FLASH_IMAGE_START=0x4000, running but interrupt (systick) does not seems to work
2023-07-28 19:01:12 +07:00
8226b046a9
Fixed typo in rp2040 hw bspw family.c
2023-07-28 11:19:08 +02:00
ec093bebad
Merge branch 'master' into renesas_ra_hs_rebased
2023-07-27 16:50:34 +07:00
6b6dcc6c09
refactored multiple ports for hcd rusb2
2023-07-26 19:52:33 +07:00
1cb3f0e92a
increase stack size for 6 series to 0x1000, 4 series to 0x800
2023-07-26 18:56:13 +07:00
fbaa148fe0
updating hcd rusb2
...
- make osal_task_delay() as weak function in usbh
- implement osal_task_delay() in hcd rusb2 (may moved to other places)
2023-07-26 18:55:41 +07:00
4deea87579
improve processing usb complete and error isr.
...
also merge them together
2023-07-25 15:07:21 +07:00
fda92fd34a
Merge branch 'master' into hcd-abort-xfer
2023-07-24 21:38:46 +07:00
f295aaf185
add hcd abort xfer for rp2040 pio usb
2023-07-24 20:58:50 +07:00
hathach