kingkevin
/
passkey_fw
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

get spi working for metro m4 express

This commit is contained in:
hathach 2023-09-08 17:40:00 +07:00
parent ed102a7795
commit bcc77a60e0
No known key found for this signature in database
GPG Key ID: F5D50C6D51D17CBA
4 changed files with 238 additions and 76 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
hw/bsp/nrf/family.c
View File

@ -102,40 +102,6 @@ void max3421e_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) {
tuh_int_handler(1);
}
//--------------------------------------------------------------------+
// API: SPI transfer with MAX3421E, must be implemented by application
//--------------------------------------------------------------------+
void tuh_max3421e_int_api(uint8_t rhport, bool enabled) {
(void) rhport;
// use NVIC_Enable/Disable instead since nrfx_gpiote_trigger_enable/disable clear pending and can miss interrupt
// when disabled
if (enabled) {
NVIC_EnableIRQ(GPIOTE_IRQn);
} else {
NVIC_DisableIRQ(GPIOTE_IRQn);
}
}
void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) {
(void) rhport;
nrf_gpio_pin_write(MAX3421E_CS_PIN, active ? 0 : 1);
}
bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) {
(void) rhport;
nrfx_spim_xfer_desc_t xfer = {
.p_tx_buffer = tx_buf,
.tx_length = tx_len,
.p_rx_buffer = rx_buf,
.rx_length = rx_len,
};
return (nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS);
}
#endif
@ -242,7 +208,7 @@ void board_init(void) {
// manually manage CS
nrf_gpio_cfg_output(MAX3421E_CS_PIN);
tuh_max3421_spi_cs_api(0, false);
nrf_gpio_pin_write(MAX3421E_CS_PIN, 1);
// USB host using max3421e usb controller via SPI
nrfx_spim_config_t cfg = {
@ -345,3 +311,40 @@ void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) {
(void) info;
}
#endif
//--------------------------------------------------------------------+
// API: SPI transfer with MAX3421E, must be implemented by application
//--------------------------------------------------------------------+
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
void tuh_max3421e_int_api(uint8_t rhport, bool enabled) {
(void) rhport;
// use NVIC_Enable/Disable instead since nrfx_gpiote_trigger_enable/disable clear pending and can miss interrupt
// when disabled and re-enabled.
if (enabled) {
NVIC_EnableIRQ(GPIOTE_IRQn);
} else {
NVIC_DisableIRQ(GPIOTE_IRQn);
}
}
void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) {
(void) rhport;
nrf_gpio_pin_write(MAX3421E_CS_PIN, active ? 0 : 1);
}
bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) {
(void) rhport;
nrfx_spim_xfer_desc_t xfer = {
.p_tx_buffer = tx_buf,
.tx_length = tx_len,
.p_rx_buffer = rx_buf,
.rx_length = rx_len,
};
return (nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS);
}
#endif

9
hw/bsp/samd51/boards/metro_m4_express/board.h
View File

@ -43,6 +43,15 @@
#define UART_TX_PIN 23
#define UART_RX_PIN 22
// SPI for USB host shield
#define MAX3421E_SERCOM SERCOM2
#define MAX3421E_SCK_PIN 13
#define MAX3421E_MOSI_PIN 12
#define MAX3421E_MISO_PIN 14
#define MAX3421E_CS_PIN 18 // D10
#define MAX3241E_INTR_PIN 20 // D9
#ifdef __cplusplus
}
#endif

231
hw/bsp/samd51/family.c
View File

@ -43,30 +43,6 @@
#pragma GCC diagnostic pop
#endif
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_0_Handler (void)
{
tud_int_handler(0);
}
void USB_1_Handler (void)
{
tud_int_handler(0);
}
void USB_2_Handler (void)
{
tud_int_handler(0);
}
void USB_3_Handler (void)
{
tud_int_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
@ -77,8 +53,81 @@ void USB_3_Handler (void)
/* Not referenced GCLKs, initialized last */
#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST)
void board_init(void)
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
//--------------------------------------------------------------------+
void USB_0_Handler(void) {
tud_int_handler(0);
}
void USB_1_Handler(void) {
tud_int_handler(0);
}
void USB_2_Handler(void) {
tud_int_handler(0);
}
void USB_3_Handler(void) {
tud_int_handler(0);
}
//--------------------------------------------------------------------+
//
//--------------------------------------------------------------------+
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
void max3421_init(void)
{
//------------- SPI Init -------------//
// Enable the APB clock for SERCOM2
MCLK->APBBMASK.reg |= MCLK_APBBMASK_SERCOM2;
// Configure GCLK for SERCOM2, initClockNVIC()
GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0_Val | (1 << GCLK_PCHCTRL_CHEN_Pos);
GCLK->PCHCTRL[SERCOM2_GCLK_ID_SLOW].reg = GCLK_PCHCTRL_GEN_GCLK3_Val | (1 << GCLK_PCHCTRL_CHEN_Pos);
// Disable the SPI module
SERCOM2->SPI.CTRLA.bit.ENABLE = 0;
// Reset the SPI module
SERCOM2->SPI.CTRLA.bit.SWRST = 1;
while (SERCOM2->SPI.SYNCBUSY.bit.SWRST);
// Set up SPI in master mode, MSB first, SPI mode 0
uint8_t const mosi_pad = 0;
uint8_t const miso_pad = 2;
SERCOM2->SPI.CTRLA.reg = SERCOM_SPI_CTRLA_MODE(3) | SERCOM_SPI_CTRLA_DOPO(mosi_pad) | SERCOM_SPI_CTRLA_DIPO(miso_pad);
SERCOM2->SPI.CTRLB.reg = SERCOM_SPI_CTRLB_CHSIZE(0) | SERCOM_SPI_CTRLB_RXEN;
while( SERCOM2->SPI.SYNCBUSY.bit.CTRLB == 1 );
// Set the baud rate
uint32_t baudrate = 4000000u;
SERCOM2->SPI.BAUD.reg = (uint8_t)(SystemCoreClock / (2 * baudrate) - 1); // Replace 1000000 with your desired baud rate
// Configure PA12 as MOSI (PAD0), PA13 as SCK (PAD1), PA14 as MISO (PAD2)
// 2 function C: PIO_SERCOM
gpio_set_pin_direction(MAX3421E_SCK_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_pull_mode(MAX3421E_SCK_PIN, GPIO_PULL_OFF);
gpio_set_pin_function(MAX3421E_SCK_PIN, 2);
gpio_set_pin_direction(MAX3421E_MOSI_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_pull_mode(MAX3421E_MOSI_PIN, GPIO_PULL_OFF);
gpio_set_pin_function(MAX3421E_MOSI_PIN, 2);
gpio_set_pin_direction(MAX3421E_MISO_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(MAX3421E_MISO_PIN, GPIO_PULL_OFF);
gpio_set_pin_function(MAX3421E_MISO_PIN, 2);
// Enable the SPI module
SERCOM2->SPI.CTRLA.bit.ENABLE = 1;
while (SERCOM2->SPI.SYNCBUSY.bit.ENABLE);
}
#endif
void board_init(void) {
// Clock init ( follow hpl_init.c )
hri_nvmctrl_set_CTRLA_RWS_bf(NVMCTRL, 0);
@ -104,7 +153,7 @@ void board_init(void)
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
#if CFG_TUSB_OS == OPT_OS_FREERTOS
#if CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
@ -129,45 +178,145 @@ void board_init(void)
gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM);
gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP);
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
// CS pin
gpio_set_pin_direction(MAX3421E_CS_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_level(MAX3421E_CS_PIN, 1);
// SPI
max3421_init();
// INT pin with external interrupt
gpio_set_pin_direction(MAX3241E_INTR_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(MAX3241E_INTR_PIN, GPIO_PULL_UP);
// Enable the APB clock for EIC (External Interrupt Controller)
MCLK->APBAMASK.reg |= MCLK_APBAMASK_EIC;
// Configure GCLK for EIC
GCLK->PCHCTRL[EIC_GCLK_ID].reg = GCLK_PCHCTRL_GEN_GCLK0_Val | (1 << GCLK_PCHCTRL_CHEN_Pos);
// Configure PA20 as an input
PORT->Group[0].DIRCLR.reg = PORT_PA20;
PORT->Group[0].PINCFG[20].reg = PORT_PINCFG_INEN | PORT_PINCFG_PULLEN;
PORT->Group[0].OUTSET.reg = PORT_PA20; // Enable pull-up
// Configure PA20 to use EIC
PORT->Group[0].PMUX[10].bit.PMUXE = MUX_PA20A_EIC_EXTINT4;
PORT->Group[0].PINCFG[20].bit.PMUXEN = 1;
// Disable EIC
EIC->CTRLA.bit.ENABLE = 0;
while (EIC->SYNCBUSY.bit.ENABLE);
// Configure EXTINT4 (PA20) to trigger on falling edge
EIC->CONFIG[0].reg |= EIC_CONFIG_SENSE4_FALL;
// Enable EXTINT4
EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << 4);
// Enable EIC
EIC->CTRLA.bit.ENABLE = 1;
while (EIC->SYNCBUSY.bit.ENABLE);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
void board_led_write(bool state) {
gpio_set_pin_level(LED_PIN, state);
}
uint32_t board_button_read(void)
{
uint32_t board_button_read(void) {
// button is active low
return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1;
}
int board_uart_read(uint8_t* buf, int len)
{
(void) buf; (void) len;
int board_uart_read(uint8_t *buf, int len) {
(void) buf;
(void) len;
return 0;
}
int board_uart_write(void const * buf, int len)
{
(void) buf; (void) len;
int board_uart_write(void const *buf, int len) {
(void) buf;
(void) len;
return 0;
}
#if CFG_TUSB_OS == OPT_OS_NONE
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler (void)
{
void SysTick_Handler(void) {
system_ticks++;
}
uint32_t board_millis(void)
{
uint32_t board_millis(void) {
return system_ticks;
}
//--------------------------------------------------------------------+
// API: SPI transfer with MAX3421E, must be implemented by application
//--------------------------------------------------------------------+
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
void EIC_4_Handler(void)
{
// Clear the interrupt flag
EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << 4);
// Call the TinyUSB interrupt handler
tuh_int_handler(1);
}
void tuh_max3421e_int_api(uint8_t rhport, bool enabled) {
(void) rhport;
if (enabled) {
NVIC_EnableIRQ(EIC_4_IRQn);
} else {
NVIC_DisableIRQ(EIC_4_IRQn);
}
}
void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) {
(void) rhport;
gpio_set_pin_level(MAX3421E_CS_PIN, active ? 0 : 1);
}
bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) {
(void) rhport;
size_t count = 0;
while (count < tx_len || count < rx_len) {
// Wait for the transmit buffer to be empty
// while (!SERCOM2->SPI.INTFLAG.bit.DRE);
// Write data to be transmitted
uint8_t data = 0x00;
if (count < tx_len) {
data = tx_buf[count];
}
SERCOM2->SPI.DATA.bit.DATA = data;
// Wait for the receive buffer to be filled
while (!SERCOM2->SPI.INTFLAG.bit.RXC);
// Read received data
if (rx_buf) {
rx_buf[count] = SERCOM2->SPI.DATA.bit.DATA;
}
count++;
}
return true;
}
#endif
#endif

1
hw/bsp/samd51/family.cmake
View File

@ -93,6 +93,7 @@ function(family_configure_example TARGET RTOS)
family_add_tinyusb(${TARGET} OPT_MCU_SAMD51 ${RTOS})
target_sources(${TARGET}-tinyusb PUBLIC
${TOP}/src/portable/microchip/samd/dcd_samd.c
${TOP}/src/portable/analog/max3421/hcd_max3421.c
)
target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})