added cmake for lpc54, update lpc55

2023-08-08 18:50:24 +07:00 · 2023-08-08 18:50:24 +07:00 · 6d877c3170
parent c24f10e4f6
commit 6d877c3170
9 changed files with 356 additions and 60 deletions
--- a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h
+++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h
@ -0,0 +1,59 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_LPCXPRESSO54608_H_
+#define BOARD_LPCXPRESSO54608_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              2
+#define LED_PIN               2
+#define LED_STATE_ON          0
+
+// WAKE button
+#define BUTTON_PORT           1
+#define BUTTON_PIN            1
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_DEV              USART0
+#define UART_RX_PINMUX        0, 29, IOCON_PIO_DIG_FUNC1_EN
+#define UART_TX_PINMUX        0, 30, IOCON_PIO_DIG_FUNC1_EN
+
+// USB0 VBUS
+#define USB0_VBUS_PINMUX      0, 22, IOCON_PIO_DIG_FUNC7_EN
+
+// XTAL
+//#define XTAL0_CLK_HZ          (16 * 1000 * 1000U)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
--- a/hw/bsp/lpc54/boards/lpcxpresso54608/board.mk
+++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.mk
@ -0,0 +1,18 @@
+MCU_VARIANT = LPC54608
+MCU_CORE = LPC54608
+
+PORT ?= 1
+
+CFLAGS += -DCPU_LPC54608J512ET180
+CFLAGS += -Wno-error=double-promotion
+
+LD_FILE = $(MCU_DIR)/gcc/LPC54608J512_flash.ld
+
+LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a
+
+JLINK_DEVICE = LPC54608J512
+PYOCD_TARGET = LPC54608
+
+#flash: flash-pyocd
+
+flash: flash-jlink
--- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake
+++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake
@ -0,0 +1,22 @@
+set(MCU_VARIANT LPC54628)
+set(MCU_CORE LPC54628)
+
+set(JLINK_DEVICE LPC54628J512)
+set(PYOCD_TARGET LPC54628)
+set(NXPLINK_DEVICE LPC54628:LPCXpresso54628)
+
+set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/LPC54628J512_flash.ld)
+
+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+  set(PORT 1)
+endif()
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_LPC54628J512ET180
+    )
+  target_link_libraries(${TARGET} PUBLIC
+    ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/libpower_hardabi.a
+    )
+endfunction()
--- a/hw/bsp/lpc54/family.cmake
+++ b/hw/bsp/lpc54/family.cmake
@ -0,0 +1,157 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk)
+set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS LPC54 CACHE INTERNAL "")
+
+if (NOT DEFINED PORT)
+  set(PORT 0)
+endif()
+
+# Host port will be the other port if available
+set(HOST_PORT $<NOT:${PORT}>)
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    add_library(${BOARD_TARGET} STATIC
+      # driver
+      ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c
+      ${SDK_DIR}/drivers/common/fsl_common_arm.c
+      ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c
+      ${SDK_DIR}/drivers/flexcomm/fsl_usart.c
+      # mcu
+      ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c
+      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c
+      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
+      )
+
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
+      BOARD_TUD_RHPORT=${PORT}
+      BOARD_TUH_RHPORT=${HOST_PORT}
+      )
+    # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM
+    if (PORT EQUAL 1)
+      target_compile_definitions(${BOARD_TARGET} PUBLIC
+        BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+        BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED
+        CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\)
+        )
+    else ()
+      target_compile_definitions(${BOARD_TARGET} PUBLIC
+        BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+        BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED
+        CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\)
+        )
+    endif ()
+
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${TOP}/lib/sct_neopixel
+      # driver
+      ${SDK_DIR}/drivers/common
+      ${SDK_DIR}/drivers/flexcomm
+      ${SDK_DIR}/drivers/lpc_iocon
+      ${SDK_DIR}/drivers/lpc_gpio
+      ${SDK_DIR}/drivers/lpuart
+      ${SDK_DIR}/drivers/sctimer
+      # mcu
+      ${CMSIS_DIR}/CMSIS/Core/Include
+      ${SDK_DIR}/devices/${MCU_VARIANT}
+      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+      set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
+    endif ()
+
+    if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
+      set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
+    endif ()
+
+    target_sources(${BOARD_TARGET} PUBLIC
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        # linker file
+        "LINKER:--script=${LD_FILE_GNU}"
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    # external driver
+    ${TOP}/lib/sct_neopixel/sct_neopixel.c
+    )
+
+  # https://github.com/gsteiert/sct_neopixel/pull/1
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES
+      COMPILE_FLAGS "-Wno-unused-parameter")
+  endif ()
+
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC54 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+  #family_flash_nxplink(${TARGET})
+  #family_flash_pyocd(${TARGET})
+endfunction()
--- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake
+++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake
@ -7,10 +7,13 @@ set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69)

 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld)

+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+  set(PORT 1)
+endif()
+
 function(update_board TARGET)
  target_compile_definitions(${TARGET} PUBLIC
    CPU_LPC55S69JBD100_cm33_core0
-    # port 1 is highspeed
-    BOARD_TUD_RHPORT=1
    )
 endfunction()
--- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake
+++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake
@ -5,6 +5,11 @@ set(JLINK_DEVICE LPC55S28)
 set(PYOCD_TARGET LPC55S28)
 set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28)

+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+  set(PORT 1)
+endif()
+
 function(update_board TARGET)
  target_compile_definitions(${TARGET} PUBLIC
    CPU_LPC55S28JBD100
--- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake
+++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake
@ -5,10 +5,13 @@ set(JLINK_DEVICE LPC55S69)
 set(PYOCD_TARGET LPC55S69)
 set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69)

+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+  set(PORT 1)
+endif()
+
 function(update_board TARGET)
  target_compile_definitions(${TARGET} PUBLIC
    CPU_LPC55S69JBD100_cm33_core0
-    # port 1 is highspeed
-    # BOARD_TUD_RHPORT=1
    )
 endfunction()
--- a/hw/bsp/lpc55/family.cmake
+++ b/hw/bsp/lpc55/family.cmake
@ -7,79 +7,105 @@ endif ()
 set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk)
 set(CMSIS_DIR ${TOP}/lib/CMSIS_5)

+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
 # toolchain set up
 set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
 set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)

-set(FAMILY_MCUS LPC55XX CACHE INTERNAL "")
+set(FAMILY_MCUS LPC55 CACHE INTERNAL "")

-# include board specific
-include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+if (NOT DEFINED PORT)
+  set(PORT 0)
+endif()

+# Host port will be the other port if available
+set(HOST_PORT $<NOT:${PORT}>)

 #------------------------------------
 # BOARD_TARGET
 #------------------------------------
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
-  if (NOT TARGET ${BOARD_TARGET})
-    add_library(${BOARD_TARGET} STATIC
-      # driver
-      ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c
-      ${SDK_DIR}/drivers/common/fsl_common_arm.c
-      ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c
-      ${SDK_DIR}/drivers/flexcomm/fsl_usart.c
-      # mcu
-      ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
-      )
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  add_library(${BOARD_TARGET} STATIC
+    # driver
+    ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c
+    ${SDK_DIR}/drivers/common/fsl_common_arm.c
+    ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c
+    ${SDK_DIR}/drivers/flexcomm/fsl_usart.c
+    # mcu
+    ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
+    )
+
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${HOST_PORT}
+    )
+  # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM
+  if (PORT EQUAL 1)
    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
+      BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+      BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED
+      CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\)
      )
-    target_include_directories(${BOARD_TARGET} PUBLIC
-      ${TOP}/lib/sct_neopixel
-      # driver
-      ${SDK_DIR}/drivers/common
-      ${SDK_DIR}/drivers/flexcomm
-      ${SDK_DIR}/drivers/lpc_iocon
-      ${SDK_DIR}/drivers/lpc_gpio
-      ${SDK_DIR}/drivers/lpuart
-      ${SDK_DIR}/drivers/sctimer
-      # mcu
-      ${CMSIS_DIR}/CMSIS/Core/Include
-      ${SDK_DIR}/devices/${MCU_VARIANT}
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+  else ()
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+      BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED
+      CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\)
      )
+  endif ()

-    update_board(${BOARD_TARGET})
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${TOP}/lib/sct_neopixel
+    # driver
+    ${SDK_DIR}/drivers/common
+    ${SDK_DIR}/drivers/flexcomm
+    ${SDK_DIR}/drivers/lpc_iocon
+    ${SDK_DIR}/drivers/lpc_gpio
+    ${SDK_DIR}/drivers/lpuart
+    ${SDK_DIR}/drivers/sctimer
+    # mcu
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    )

-    if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
-      set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
-    endif ()
+  update_board(${BOARD_TARGET})

-    if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
-      set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
-    endif ()
+  if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
+  endif ()

-    target_sources(${BOARD_TARGET} PUBLIC
-      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+  if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
+    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
+  endif ()
+
+  target_sources(${BOARD_TARGET} PUBLIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      # linker file
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
      )
-
-    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        # linker file
-        "LINKER:--script=${LD_FILE_GNU}"
-        # nanolib
-        --specs=nosys.specs
-        --specs=nano.specs
-        )
-    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--config=${LD_FILE_IAR}"
-        )
-    endif ()
  endif ()
 endfunction()

@ -117,7 +143,7 @@ function(family_configure_example TARGET RTOS)
    )

  # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX ${RTOS})
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC55 ${RTOS})
  target_sources(${TARGET}-tinyusb PUBLIC
    ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
    )
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@ -51,8 +51,11 @@
 #define OPT_MCU_LPC40XX             7 ///< NXP LPC40xx
 #define OPT_MCU_LPC43XX             8 ///< NXP LPC43xx
 #define OPT_MCU_LPC51UXX            9 ///< NXP LPC51U6x
-#define OPT_MCU_LPC54XXX           10 ///< NXP LPC54xxx
-#define OPT_MCU_LPC55XX            11 ///< NXP LPC55xx
+#define OPT_MCU_LPC54              10 ///< NXP LPC54
+#define OPT_MCU_LPC55              11 ///< NXP LPC55
+// legacy naming
+#define OPT_MCU_LPC54XXX           OPT_MCU_LPC54
+#define OPT_MCU_LPC55XX            OPT_MCU_LPC55

 // NRF
 #define OPT_MCU_NRF5X             100 ///< Nordic nRF5x series