hathach
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
hathach
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
hathach
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
hathach
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
hathach
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
hathach
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
hathach
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
hathach
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
hathach
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
hathach
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
hathach
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
hathach
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
hathach
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
hathach
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
hathach
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
hathach
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
hathach
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
ba49d26e19
fix build error with device 43xx
...
refractor mscd ramdisk demo
2013-11-15 00:01:07 +07:00
hathach
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
hathach
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
hathach
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00
hathach
d8f32a79fc
technically, mouse + keyboard device demo also work on lpc13uxx
2013-11-11 14:02:55 +07:00
hathach
9a81cbcd59
remove xfer_type in endpoint_handle_t
...
cdc device demo runs on lpc13uxx
2013-11-11 13:52:31 +07:00
hathach
f00a4b448d
adding support for lpc13uxx
2013-11-11 12:48:21 +07:00
hathach
9cb99d3716
house keeping
2013-11-08 19:37:26 +07:00
hathach
7ff0dbb64c
add tusbd_cdc_is_busy
...
enhance cdc serial device demo
refractor fifo.c
2013-11-08 14:46:48 +07:00
hathach
15d3a418bd
add windows driver for cdc
...
add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset
2013-11-08 12:03:32 +07:00
hathach
3945869cc2
refractor tusb_descriptor, adding support for cdc descriptor
2013-11-07 12:28:10 +07:00
hathach
8c9def8618
clean up tusb_descriptors
2013-11-07 11:51:39 +07:00
hathach
f1d47702e8
refractor mouse dev app
2013-11-06 20:06:28 +07:00
hathach
9171d106bc
added hid device hidd_isr callback
...
refractor keyboard dev demo app
2013-11-06 19:55:48 +07:00
hathach
60d444b452
fix a bug with USB1, but still cannot get interrupt occurred on USB1
2013-11-06 14:53:18 +07:00
hathach
58b41a05db
refractor for device able to work on usb1 of lpc43xx. But could not get it work on EA4357
2013-11-06 14:20:45 +07:00
hathach
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
hathach
024858a605
complete msc device demo with 8KB ram disk
2013-11-05 14:55:58 +07:00
hathach
83d9ececfb
msc add support
...
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
2013-11-05 13:02:15 +07:00
hathach
d02ef07337
added support for
...
- sense data scsi_sense_fixed_data_t
- read format capacity scsi_read_format_capacity_data_t
change msc device callback to support actual response
fix dcd_pipe_clear_stall also reset toggle
2013-11-01 22:00:39 +07:00
hathach
f2ae5b541f
add dcd pipe clear stall
...
- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input
complete msc device driver
add usbd clear stall endpoint
2013-11-01 14:44:14 +07:00
hathach
f797c4e02a
rename device project
2013-11-01 12:17:54 +07:00
hathach
077b6defe9
rename device project
2013-11-01 12:13:31 +07:00
hathach
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
hathach
d67a7b7959
fix dcd_data declared with TUSB_CFG_ATTR_USBRAM
...
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL
add hid mouse device
fix mouse descriptor with vertical wheel support
2013-10-30 12:20:00 +07:00
hathach
d9ce879df8
able to enumerate mouse + keyboard (missing timing at set configured though)
2013-10-29 17:16:41 +07:00
hathach
cb0a02f8c9
change device driver init to open (when configured)
...
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29 16:29:48 +07:00
hathach
5ab195a73d
temporarily implementation of dcd_pipe_is_busy
2013-10-29 15:09:16 +07:00
hathach
db986b3107
able to fully enumerated with keyboard
2013-10-29 14:19:56 +07:00
hathach
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
hathach
d925026089
make device keyboard buildable & runnable with ea4357
2013-10-27 21:33:06 +07:00
hathach
a98bae0d19
enhance serial host app
2013-10-27 20:56:41 +07:00
hathach
1d28b2bd10
refractor cdc serial host app.
...
fix RTOS cdc_serial_app_task executing forever
2013-10-27 20:44:06 +07:00
hathach
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
hathach
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
hathach
0d00742cf0
more doxygen work
...
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-25 17:28:31 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
hathach
86b3e3174d
refine mouse demo
2013-10-16 12:05:48 +07:00
hathach
f28d2d1189
add supported class to greeting
2013-10-15 12:39:11 +07:00
hathach
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
hathach
1263dbb122
enhacne msc demo, update IAR project file
2013-10-02 13:32:39 +07:00
hathach
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
hathach
ef83b8e10a
wrap up msc demo
2013-10-01 17:05:02 +07:00
hathach
fffd613897
enhance cd command
2013-10-01 16:36:52 +07:00
hathach
18b3179bc6
refractor msc host app examples
2013-10-01 16:11:34 +07:00
hathach
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
hathach
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
hathach
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
hathach
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
hathach
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
hathach
bfa96ae9da
fix an "extra" semaphore wait in msc host
2013-09-27 23:23:45 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
26f75d6cac
house keeping
2013-09-26 15:35:15 +07:00
hathach
238afb474f
house keeping
2013-09-26 15:15:16 +07:00
hathach
a6726f7d39
added mkdir command
2013-09-26 15:08:49 +07:00
hathach
0268e0b787
added clear screen command
2013-09-26 15:04:02 +07:00
hathach
9d60db0f9f
add scsi write10 & test unit ready
...
done copy command
implement get_fattime using __DATE__ and number of calls
2013-09-26 14:37:40 +07:00
hathach
4bdede53eb
refractor cli error handling
...
add cat command
2013-09-26 11:27:48 +07:00
hathach
f827750120
add cat command to cli
2013-09-26 01:14:27 +07:00
hathach
b995e25308
enable long filename
2013-09-25 20:44:18 +07:00
hathach
89898acd5d
almost complete cli for msc
2013-09-25 19:52:05 +07:00
hathach
1fee50b9fe
add tusbh_msc_status
...
reanme PRINTF_TARGET_DEBUG_CONSOLE to PRINTF_TARGET_SEMIHOST
add read10 implementation
able to read fat root sector
2013-09-25 16:20:38 +07:00
hathach
cf65f859be
working on fatfs integration
...
fix retarget input for lpcxpresso
2013-09-25 11:23:53 +07:00
hathach
bd9af2d57b
added cli support
2013-09-24 21:04:56 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
hathach
c4fef827b1
refractor, add wheel for mouse demo
2013-09-23 01:12:59 +07:00
hathach
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
hathach
2db5fcdf0a
update keil project for freertos & cmsis
2013-09-21 01:05:54 +07:00
hathach
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
hathach
d8907c9a2b
IAR host none project working
2013-09-19 18:18:05 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
hathach
9d87a1c62b
temporarily comment out all the lwip related code
2013-09-18 21:08:48 +07:00