make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
- SCSI_CMD_MODE_SELECT_6
- SCSI_CMD_MODE_SENSE_6
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL
fix msc device bug with no data unsupported command
complete msc device demo with ram disk of 8KB
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
add test for mutex in test_osal_none.c
implement usbh_control_xfer using mutex to get access to queue xfer on control pipe
(while semaphore is used to sync with hcd DMA)
failed to issue control xfer: set idle & get report descriptor in hidh_open_subtask (more to work on)
add interface number to hidh_interface_info_t
refractor hidh_open_subtask to be a true subtask
cannot run with set idle code ON because of semaphore misuse
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
implementing dcd_lpc175x_6x.c
add usbd_dcd.h
add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event
parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0)
--> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor).
uncomment write zero length will cause issue, no more interrupt ?
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx)
add dcd_nxp_romdriver for handling usb rom driver
add BIT_TEST_ in binary.h
remove mw_usbd_hid.h include due to lexical conflict
NOTES: print_greeting if is executed before the start of freeRTOS scheduler --> hardfault
- print_greeting->vsprintf->systick -> bunch of ISR --> hardfault.
printf using serial after the start of scheduler is ok though
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
- add hal_debugger_is_attached & hal_debugger_breakpoint
- assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed
- fix get control qhd function when dev_addr is not zero (shifted 1)
- fix wrong logic for unsupported class
- add tests for pipe_close (while TDs are active)
- add tests for device unplugged
add tesst & implement the async_advance_isr to clean up "REMOVING" queue head
- add helper find previous qhd
- add remove qhd from async list
- add is_removing field for async advance isr to clean up
add pipe close for control pipe & bulk pipe (with tests)
add helper get qhd from pipe_handle
add osal_queue_send in usbh_device_plugged
add macro for placing breakpoint macros
fix ehci init:
- regs->cmd or (add run_stop)
- enable port power in portsc
add tusb_task_runner in main loop
fix binary.h compiler specific
add hal_init code to reset & set usbmode --> able to get USB ISR
remove const qualifier from return function of
- get_operational_register
- get_period_frame_list
- get_async_head
- get_period_head
- get_control_qhd
add stub for
- hcd_port_connect_status
- hcd_port_speed
add usbh_control_xfer_subtask as xfer and wait
fix potential error when update device info & open control pipe for new address
fix build error with hal_****.c
add STATIC_ASSSERT to perform compile time checking with sizeof later
update osal_queue_receive and osal_semaphore_wait for osal_none to support subtask
- add TASK_ASSERT & TASK_ASSERT_STATUS
add more code for enumerate task
add control requests & its type def
add API for HCD
- hcd_pipe_addr0_open
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- hcd_pipe_open
- hcd_port_speed
add hcd_init to usbh_init and update test code
add TUSB_CFG_OS_TICK_PER_SECOND define for TUSB_OS_NONE
change osal_semaphore_wait and osal_queue_receive API to have timeout effectively