hathach
a8d32d81b3
tested with IAR & keil for device ea4357, fix some warnings
2014-03-23 17:33:58 +07:00
hathach
3a8dce013d
remove IAD_DESC_REQUIRED
...
add compiler guard for exceeding number of endpoints for lpc11/13u
2014-03-23 00:00:23 +07:00
hathach
1cdca167cd
rename dcd_11u_13u_qhd_t::total_bytes to nbytes to prevent confusion
...
introduce scsi_data to mscd_interface_t to make tusbd_msc_scsi_cb buffer's address no longer to be required in USB ram section --> save usb ram for lpc11/13u
2014-03-22 22:50:08 +07:00
hathach
7c5b386130
clean ATTR_USB_MIN_ALIGNMENT on application and most of device except the msc_device.c
2014-03-21 19:23:19 +07:00
hathach
d2d0d0a6d5
clean up some device warnings
...
move led_blinking_task and led_blinking_set_interval to board.c
2014-03-21 16:32:39 +07:00
hathach
8fbafc460c
fix a problem with dcd 13uxx dcd_pipe_clear_stall that should clear toggle for buffer0 (instead of active buffer)
...
as the next transfer is always forced to be happened on buffer0
2014-03-13 17:06:18 +07:00
hathach
c92b03edfb
added scatter file for lpc11u & lpc13u for it to run with keil
2014-03-12 12:49:59 +07:00
hathach
6a736db159
try to port lpc11uxx device demo with IAR
2014-03-10 15:31:12 +07:00
hathach
ad72db5aea
change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code
...
change pipe xfer API buffer from void* to uint8_t*
change FIFO_DEF to have a separated buffer to be compatible with IAR\
refractor IAR data alignment pragma
2014-03-10 13:13:13 +07:00
hathach
03ad1afef9
clean up warnings
2014-01-24 22:04:59 +07:00
hathach
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
hathach
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
hathach
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
hathach
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
hathach
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
hathach
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
hathach
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
hathach
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
hathach
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
hathach
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
hathach
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
hathach
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
hathach
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
hathach
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
hathach
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
hathach
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
hathach
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
hathach
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
hathach
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
hathach
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
6e8440afe5
complete double buffering for queueing xfer for lpc11u/13u requried by msc device
2013-11-14 14:12:07 +07:00
hathach
7d84139bd4
fix potential issue with stall endpoints
...
NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue.
clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13 14:00:39 +07:00
hathach
92d9c36dbc
able to build and run cdc device demo on lpc11uxx
2013-11-13 12:40:11 +07:00