3c4ab6bd8a
Merge pull request #883 from hathach/fix-rp2040-host-transferred-bytes
...
fix computing transferred bytes with E4
2021-06-10 11:35:51 +07:00
501de2a5e8
fix computing transferred bytes with E4
2021-06-08 10:29:22 +07:00
c2b85c8d6d
add OPT_MCU_MM32F327X
...
move dcd_mm32f into mindmotion folder
2021-06-07 18:51:44 +07:00
26b9fc38ed
Add MM32 SDK and USB driver ( #869 )
...
* Add MM32 SDK and USB driver
* add mindmotion mm32sdk as submodule
remove the local copy of mm32
* mit license
Signed-off-by: zhangslice <1304224508@qq.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-07 17:32:46 +07:00
5a554508ca
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-03 22:17:30 +02:00
c81bc38d42
Add __unused to variables that are only used if TU_LOG does something
2021-06-03 10:10:44 -05:00
e26cf6b26c
Missing RX device dependency corrected
2021-06-02 21:33:32 +02:00
8ea0dfba68
Merge pull request #865 from kilograham/pico-0.10.0
...
Pico 0.10.0
2021-06-03 01:02:54 +07:00
bc0a0386e9
clean up
2021-05-31 18:41:08 +07:00
31077f48d2
correct ohci endpoint address in xfer complete
2021-05-31 18:16:07 +07:00
4e98ce9147
use hcd_frame_number() instead of uframe
2021-05-31 18:15:47 +07:00
da8000d42d
clean up ohci, remove obsolete api
2021-05-31 16:34:16 +07:00
04797bc5a5
clean up
2021-05-31 16:05:55 +07:00
3fb80e76ce
remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
2021-05-31 12:08:37 +07:00
5cf930d78a
fix cast-align warning in msc host
2021-05-31 11:11:00 +07:00
c2a0c1507b
add more comment
2021-05-30 23:44:29 +07:00
54c9150574
add errata number
2021-05-30 23:41:59 +07:00
6498ee1996
fix incorrect data toggle when max packet size < 64
...
fix host buf_sel panic with "already available"
2021-05-30 23:35:54 +07:00
3973ec4b5e
rp2040: fix debug compilation error
2021-05-30 08:16:15 -05:00
b4f092ec74
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-05-29 21:23:39 +02:00
164778a716
update limit each transfer not less than 64
2021-05-28 17:42:13 +07:00
9ad6fadf6a
more include clean up
2021-05-27 18:34:07 +07:00
b36b211c26
clean up tusb_fifo.h include
2021-05-27 17:58:42 +07:00
13613eafb7
correct ehci control endpoint address report on xfer complete
...
improve host log
2021-05-18 12:58:24 +07:00
1dd2cd43dd
add hcd_ehci.h as interface for ehci port
2021-05-18 12:58:24 +07:00
9233269a2c
only apply errata walkaround for nrf52
2021-05-11 18:38:23 +07:00
e2f795067a
Allow build for NRF5340 MCU
...
Errata code referred to NRF_USBD_BASE.
This definition is not present in NRF5340 but both NRF52 and NRF53
do have NRF_USBD which maps to NRF_USBD_BASE for NRF52 and
to NRF_USBD_S_BASE for NRF5340.
This just make build possible for NRF5340.
2021-05-11 12:37:08 +02:00
72f5202086
Update trace statements that referenced deprecated structure elements.
2021-05-10 10:09:09 -04:00
2a343ba916
Merge pull request #826 from hathach/minor-cleanup
...
minor clean up
2021-05-10 19:29:45 +07:00
13de8f5d98
minor clean up
2021-05-10 19:15:46 +07:00
13b510ad8e
Update hcd_rp2040.c
...
Remove reference to the deprecated "num" and "in" members of struct hw_endpoint which still exist in an assert statement and break DEBUG builds.
2021-05-07 16:49:48 -04:00
42a1d2f3b9
Merge pull request #804 from hathach/audio_make_dma_ready
...
Implement functions to allow for DMA usage in audio driver.
2021-05-02 15:29:38 +07:00
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
a8e109cb3d
clean up
2021-04-26 17:14:20 +07:00
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
f14daf2081
fix unaligned access with port1 hs
2021-04-24 15:04:58 +07:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
8bed369c7f
lpc55 better multiport support
2021-04-24 11:30:14 +07:00
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
03f974c9b9
Implement functions to allow for DMA usage in audio driver.
...
- Add tud_audio_n_get_ep_out_ff(), tud_audio_n_get_ep_in_ff(),
tud_audio_n_get_rx_support_ff(), and tud_audio_n_get_tx_support_ff()
- Change get_linear_read/write_info() to return linear and wrapped part
at once
- Adjusted affected code in audio_device.c and tested with
audio_4_channel.
2021-04-23 10:27:48 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
b687a4fc20
Merge branch 'master' into edpt_ISO_xfer
2021-04-15 12:12:52 +07:00
3c84776e0a
minor clean up
2021-04-15 12:09:12 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
3acf0c2d73
revert dcd_edpt_xfer_fifo() implementation for esp32s2
2021-04-06 01:00:00 +07:00
69ad092fce
revert dcd_edpt_xfer_fifo() implementation for nuc120 121
2021-04-06 00:13:12 +07:00
49b2d8f26c
revert dcd_edpt_xfer_fifo() implementation for msp430
2021-04-06 00:07:17 +07:00
8d2dfe872c
revert dcd_edpt_xfer_fifo() implementation for stm32_fsdev
2021-04-05 19:19:49 +07:00
bebe2f0bbf
revert dcd_edpt_xfer_fifo() implementation for nuc505
2021-04-04 22:50:26 +07:00
586a46c7d3
revert dcd_edpt_xfer_fifo() implementation for samg
...
samg fifo is accessed byte by byte (although the register is 32 bit).
2021-04-04 21:33:19 +07:00
a1efd41649
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-04-03 09:50:08 +02:00
4a597c9698
cleanup
2021-03-28 12:42:28 +09:00
a1f1941c3f
fixed a OUT transfer did not completed multiple of the max packet size
2021-03-27 16:03:04 +09:00
e010ea30e5
using BRDY interruption for handling IN transfers.
2021-03-27 14:42:19 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
13735eb21d
added dcd for Renesas USBa
2021-03-26 19:30:53 +09:00
2807644e7e
add efm32 driver
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 20:45:56 +00:00
a60bd0c8ac
Fix bug in writing to constant src/dst address.
...
Copying has to be conduct in full words (at least for STM32). Renamed
copy function to tu_fifo_write_n_const_addr_full_words()
2021-03-23 19:33:04 +01:00
64f41dea62
fix race condition that could cause drop packet of Bulk OUT transfer
...
NRF_USBD->SIZE.EPOUT[epnum] only need to write once to enable
Bulk/Interrupt transfer. We only need to do it in dcd_edpt_open() and
dcd_edpt_clear_stall()
2021-03-18 15:07:07 +07:00
82e24306e2
fix build with OPT_MCU_LPC177X_8X
2021-03-16 15:49:09 +07:00
a397353916
fix ci build with rp2040
2021-03-10 17:58:39 +07:00
794083b647
Merge branch 'master' into edpt_ISO_xfer
2021-03-10 17:10:49 +07:00
8cabbb28df
fix enum walkaround forever check for SE0 when pull up is disabled
2021-03-04 18:36:18 +07:00
a1b07ae14c
Change copy modes for new read/write functions in tusb_fifo.c
2021-03-02 21:52:42 +01:00
3cdb82c21c
Change for copy modes in dcd_synopsis.c
2021-03-02 21:42:24 +01:00
7b8a08d2e1
Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()
2021-03-02 20:00:39 +01:00
c8b6d9b990
Revert implementation of dcd_edpt_iso_xfer()
2021-03-02 19:28:35 +01:00
a298045f6c
clean up
2021-03-02 23:30:21 +07:00
9d5e369170
rp2040 add disconnection detection
...
- also use dcd_event_bus_reset()
- Add TODO for suspend, resume later on (need to test with/without vbus
detection).
2021-03-02 23:24:36 +07:00
1676a836d1
fix rp2040 host build
2021-03-02 14:54:12 +07:00
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
5a753c1ab0
Merge pull request #675 from majbthrd/rp2040epaddr
...
rp2040: use TU endpoint conventions and remove redundant variables
2021-02-27 00:38:53 +07:00
eb44b6f7db
rp2040: improve _hw_endpoint_init()
2021-02-26 11:07:34 -06:00
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
0c05a02e67
Merge pull request #682 from hathach/rp2040_fix_hcd_init
...
Update RP2040 hcd_init to have rhport argument.
2021-02-26 11:52:48 +07:00
e6e7c73f6e
Update RP2040 hcd_init to have rhport argument.
2021-02-25 15:48:19 +00:00
efea18a888
Merge branch 'master' into rp2040epaddr
2021-02-25 09:15:42 -06:00
0632ecf556
Merge branch 'master' into rp2040device
2021-02-25 08:57:09 -06:00
999ef227d0
rp2040: requested code mode in rp2040_usb.h
2021-02-25 08:45:47 -06:00
50a0bddd8b
Merge pull request #672 from majbthrd/rp2040trim
...
rp2040: correctly size variables to reduce RAM usage
2021-02-25 21:17:59 +07:00
762f262be7
rp2040: requested change from TU_MIN to tu_min16
2021-02-25 07:58:54 -06:00
5ebe53f02d
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-24 20:54:35 +01:00
448dcdc4cf
spresense: fix setup processed flag
2021-02-24 17:39:16 +01:00
a7f07a1a63
Fix pointer type
2021-02-23 21:53:17 +01:00
697c9476b7
Fix pointer type
2021-02-23 21:42:38 +01:00
cb33840a9b
Fix pointer type
2021-02-23 21:15:27 +01:00
e00178a1af
rp2040: don't compile in host code when in device mode
2021-02-23 14:04:56 -06:00
00248de15a
Fix shadowing declartion in dcd_da146xx.c
2021-02-23 20:23:26 +01:00
c76e04f835
Add dcd_edpt_iso_xfer() to dcd_template.c
2021-02-23 19:50:54 +01:00
e223d46033
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
...
Conflicts:
src/common/tusb_fifo.h
src/osal/osal_none.h
2021-02-23 19:47:57 +01:00
313dd1439d
Implement dcd_edpt_iso_xfer() for dcd_da146xx.c BUT WITHOUT DMA SUPPORT
2021-02-23 19:41:21 +01:00
c5422a5c48
rp2040: use TU endpoint conventions and remove redundant variables
2021-02-23 12:06:41 -06:00
656673fb58
Merge pull request #674 from hathach/host-msc
...
Enhance Host MSC
2021-02-24 00:19:38 +07:00
451650fa32
move ehci and ohci to portable folder
2021-02-23 23:09:48 +07:00
5a8ae31316
rp2040: leverage existing macro for capping endpoints in pico-sdk
2021-02-23 10:08:38 -06:00
592d047936
rp2040: correctly size variables to reduce RAM usage
2021-02-22 20:53:16 -06:00
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
c5b8980398
separate hcd_init from ehci
2021-02-22 22:40:51 +07:00
8a2e4c79fd
make hcd tdi more generic
2021-02-22 18:02:52 +07:00
b591a66b3d
Pass the correct speed on Spresense
2021-02-22 11:24:16 +01:00
00b4b74e82
rename hcd_lpc18_43 to hcd_transdimension
2021-02-22 17:15:06 +07:00
43ca626774
merge iso and cbi transaction size to max ep size
2021-02-22 12:27:02 +07:00
cb5b9eb2f6
Remove stray. commented out line
2021-02-19 08:33:06 -05:00
ac87a4547d
Change to using tu_min32
...
This was a github edit, not tested
2021-02-18 08:25:04 -05:00
27f4b6f5a4
Included size check for ISO buffers
2021-02-17 18:22:24 -05:00
6cb9a6ebb1
Add (void *) for pointer cast.
2021-02-17 23:04:19 +01:00
d8481ac7e4
Fix wrong pointer call in dcd_samg.c
2021-02-17 22:52:59 +01:00
666e0fad35
Fix wrong tu_fifo_read_n() call in dcd_stm32_fsdev.c
2021-02-17 22:50:49 +01:00
402005c9e0
Fix missing pointer operator in dcd_nuc505.c
2021-02-17 22:49:10 +01:00
94bf4f54da
Fix missing FIFO definitions
2021-02-17 22:29:51 +01:00
eee47493a3
Fix bug in evasion buffer list
2021-02-17 21:59:32 +01:00
2d7b61972c
Implement dcd_edpt_iso_xfer() for dcd_stm32_fsdev
...
Implemented a special copy strategy to copy directly from the FIFO. This
function, however, is untested and should be regarded as unreliable
until somebody was able to test it
2021-02-17 20:46:31 +01:00
79b360f0a6
Enable iso buffers per rp2040 spec
2021-02-17 13:22:34 -05:00
a5d7b6266d
Implement dcd_edpt_iso_xfer() for msp430
2021-02-14 14:05:15 +01:00
893f997dcb
Change FIFO use indication to ff == NULL to avoid future errors.
...
This way people don't need to pay attention for the buffer pointer
2021-02-14 09:25:34 +01:00
b634b5958b
Implement dcd_edpt_iso_xfer() for INTERRUPT driven dcd_nuc505
2021-02-13 21:00:55 +01:00
0c3dc8f99b
Implement dcd_edpt_iso_xfer() for dcd_nuc121.c
2021-02-13 17:44:59 +01:00
126e46e38a
Fix not increment xfer->buffer if xfer->buffer == NULL in dcd_samg.c
2021-02-13 17:37:13 +01:00
e681678402
Implement dcd_edpt_iso_xfer() for dcd_nuc120.c
2021-02-13 17:06:27 +01:00
7ab389db21
Implement dcd_edpt_iso_xfer() for dcd_samg.c. NOTE: ISO EP not supported
2021-02-13 16:36:32 +01:00
59d6ed9ea4
Implement dcd_edpt_iso_xfer() for dcd_esp32s2.c
2021-02-13 12:13:10 +01:00
cdf600048f
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-12 18:05:20 +01:00
a9fd0a454a
Complete redesign of audio driver.
2021-02-12 16:28:41 +01:00
09868434cd
Fixes RP2040 buffer reallocation overrun problem ( #642 )
...
Fix running out of memory on a device that repeatedly closes and opens an endpoint. This is a workaround at the moment. A better solution would be to implement reclaiming usb buffer memory when closing an endpoint (i.e. implement dcd_edpt_close).
2021-02-12 08:16:46 +00:00
78f50518a4
Merge pull request #610 from hathach/rp2040-followup2
...
Rp2040 followup2
2021-02-01 12:44:53 +07:00
a044578a33
Merge pull request #601 from majbthrd/start_pi2tu
...
start the assimilation of Pi Pico into TU
2021-02-01 12:43:59 +07:00
84406f1654
Rework audio driver
2021-01-31 19:08:23 +01:00
1abf9eeb80
clean up rp2040 assigned_address, remove panic from remote_wakeup
2021-01-27 13:18:03 +07:00
c3c4f65fea
wrap rp2040_usb around opt mcu
2021-01-27 13:04:38 +07:00
5f999fa6a0
Fix dcd issues on cxd56
...
Pass the next setup package when USB stack is ready to receive it.
When the transfer is 0 on EP0 send complete to the USB stack
Pass the data received after the setup package to the USB stack.
2021-01-25 11:13:56 +01:00
edc2224118
rp2040: start to adopt TU coding conventions
2021-01-23 20:21:58 -06:00
587d1b334b
rp2040_hcd: check pointer before using
2021-01-23 20:19:10 -06:00
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
56edc2b261
Change names from edpt_ISO_xfer to edpt_iso_xfer
2021-01-19 10:50:19 +01:00
595a88b34c
Correct include path to #include "common/tusb_fifo.h"
2021-01-18 17:38:32 +01:00
dff588d772
Implement dcd_edpt_ISO_xfer() and adapt transmission scheme
2021-01-18 17:15:23 +01:00
485d8fa77e
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-01-09 12:10:08 +01:00
d33b22d127
fix ci
2021-01-08 22:48:52 +07:00
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
cca27fc383
another rename
2021-01-08 16:54:50 +07:00
201ea7ca6d
remove inline for update_grxfsiz
2021-01-08 16:38:41 +07:00
9998e8a665
more minor work
2021-01-08 16:34:36 +07:00
86c34a9a33
minor clean up following pr581
2021-01-08 16:25:30 +07:00
1f00a182c4
Merge pull request #581 from hathach/dcd_synopsis_mem_allocation
...
Dcd synopsis mem allocation
2021-01-08 12:45:46 +07:00
3e1d85eed2
comment clean up
2021-01-08 11:43:26 +07:00
cc5dfd03cd
update comment and correct the size to 8+2
2021-01-08 11:21:26 +07:00
60620dca42
walkround for samd21 setup_packet overflow
...
increase setup packet size from 8 to 12, since USB DMA controller is
suspected to overflow the buffer with 2 extra bytes
2021-01-08 01:21:03 +07:00
f2b4567a2b
Correct function declaration
2021-01-04 17:15:42 +01:00
2fa500af18
Minor corrections for PR
...
- externerlize code into functions
- correct comments
2021-01-04 17:00:23 +01:00
37bb14678a
Remove too verbose comment
2021-01-04 12:06:16 +01:00
09d8ead4b8
Start changes - not yet finished
2021-01-04 12:02:08 +01:00
13b499f910
Clean up
2021-01-03 17:59:50 +01:00
56c47188d8
Rework USB FIFO allocation scheme and allow RX FIFO size reduction
2021-01-03 16:11:56 +01:00
2737166d2b
fixed wrong direction to enable EP in dcd_edpt_open.
...
fixed incorrect handling of STALL other than EP0
convert tabs to spaces
removed unused symbols
2020-12-23 20:32:29 +09:00
2bbfc56bd8
added support for frdm_kl25z
2020-12-18 00:07:50 +09:00
8b34f2fca8
fix ci
2020-11-27 16:07:13 +07:00
94527951a0
add bus suspend & resume support for esp32s2
2020-11-27 15:54:55 +07:00
496c7c701a
fix ci
2020-11-09 01:23:19 +07:00
229be75a98
Move into if statement
2020-10-24 17:16:05 -06:00
01996457c8
CR feedback: compare CFG_TUSB_RHPORT1_MODE instead of using new macro
2020-10-24 17:11:32 -06:00
c87ed8eff1
Allow use of internal FS PHY on OTG_HS interface
...
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with
either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently
the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY
(`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
2020-10-18 17:01:17 -06:00
6ce5395947
Merge pull request #525 from kasjer/kasjer/da1469x-iso
...
da1469x iso support
2020-10-11 16:12:20 +07:00
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
762b390433
Merge pull request #521 from PanRe/uac2
...
Uac2
2020-10-10 14:33:42 +07:00
f914e48d25
Dynamically check STM32F3 IRQ remap option
2020-10-10 05:02:37 +02:00
032e84c9be
Revert dcd_alloc_mem_for_conf() but keep changes from @kasjer for ISO EP
...
Add tud_audio_set_itf_close_EP_cb()
2020-10-09 19:50:05 +02:00
d36bfddc30
DA146xx: Allow transmitting of packets larger then 64 bytes
...
FIFO is limited to 64 bytes yet MCU is capable of transmitting
larger packets provided that FIFO will be filled on the fly
and USB_USB_TXCx_REG_USB_LAST_Msk bit is set after FIFO is
filled with all the data that should be transmitted.
This change allows to use FIFO level warning interrupt to fill
FIFO. When DMA is available it will be used instead of interrupts.
Some function names were changed to better reflect what each function
does.
2020-10-08 13:20:58 +02:00
33a5081bd1
DA146xx: Add support for ISO endpoints
...
Few changes were needed to have working ISO endpoints.
2020-10-08 13:20:58 +02:00
6615dd9062
DA146xx: Add dcd_edpt_close
...
Closing endpoints can be important when there are alternate
instances. This adds functionality of closing endpoints
similar to what exists in other drivers.
2020-10-08 13:20:58 +02:00
9edf4334c4
DA146xx: Allow receiving of packets larger then 64 bytes
...
Internal FIFO for each endpoint is limited to 64 bytes.
It is possible to have longer packets if respective FIFO
is read during actual packet transmission.
This change updates receive data path to allow packets (and
endpoint size) larger then 64 bytes.
If DMA is not used yet DMA is setup for reception of big packets.
If DMA is already assigned to some transfer, code enables FIFO level
warning interrupts and tries to read data before FIFO is filled up.
2020-10-08 13:20:58 +02:00
440e23c491
Merge pull request #529 from gh2o/stm32-race
...
stm32 fsdev: fix ISTR and CTR_RX/TX race conditions
2020-10-07 15:16:55 +07:00
020ad47bb0
stm32: fix ISTR and CTR_RX/TX race conditions
2020-10-06 14:43:10 -07:00
d41248900b
Merge branch 'uac2' of https://github.com/PanRe/tinyusb into PanRe-uac2
2020-10-06 22:32:22 +07:00
96da1ca4b8
nrf5x: Add support for ISO endpoints
...
ISO endpoints were not covered so far by the driver code.
This adds support for ISO IN and OUT endpoint handling.
Registers for ISO IN(OUT) endpoints are placed just after normal IN(OUT)
so in some cases common code could be used for handling all type of
transfers.
Generally code synchronizes ISO endpoint handling to SOF interrupt.
This code does not change the way of how non-ISO endpoints are treated.
Code uses strategy outlined in nRF52840 Produce Specification v1.0
sections 6.35.11.1 and 6.35.11.2.
2020-10-01 09:22:55 +02:00
6f5ee09511
nrf5x: Increase size of mps to 16 bits
...
msp stores max packet size.
For ISO endpoints 8 bits is not enough so it's changed to 16 bits.
2020-10-01 09:22:55 +02:00
fceb8853c7
nrf5x: Add dcd_edpt_close
...
Closing endpoints can be important when there are alternate
instances. This adds functionality of closing endpoints
similar to what exists in other drivers.
2020-10-01 09:22:55 +02:00
9c837300f1
Fix minor issue.
...
- Change set_EP0_max_pkt_size() to set_EP0_max_pkt_size(void).
2020-09-28 19:23:38 +02:00
529622710c
Cleanup for PR.
2020-09-28 18:10:57 +02:00
142871654e
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-28 18:08:39 +02:00
642a8b00c8
synopsys: Fix odd/even frame handling for ISO
...
Current implementation always sets odd/even bit for ISO transactions.
This is a good strategy only if interval is 1.
For ISO endpoint interval in (micro)frames is computed as
2^(interval-1), which means that odd/frame number should stay
same for interval values > 1.
With this change only when interval is 1 odd/even bit is modified.
2020-09-28 08:41:17 +02:00
6b52330969
synopsys: Remove compilation warning in dcd_edpt_close
...
dcd_edpt_close() no longer modifies FIFO distribution.
Code that that was commented out is removed along with
variables that are no longer used.
FIFO distribution among endpoints is handled upfront
and does not need to be modified in open and close endpoint
functions.
2020-09-28 08:41:17 +02:00
6f3d0af1e6
synopsys: Fix fifo allocation schema
...
Recommended FIFO allocation schema includes 2 maximum endpoint sizes.
Comment suggested that this is the case while it would work according
to this description only in checked endpoints were ascending sizes.
Also two same size endpoints would be counted as one.
That is fixed by way sz is filled.
Calculation used too much modulo operation while single division was enough
to account for odd FIFO sizes.
Extra space that is evenly distributed between Bulk and control endpoints
was incorrectly calculated it could prevent allocation of ISO endpoint FIFO
when bulk endpoints existed with smaller endpoint numbers.
Minimum endpoint FIFO size is 16 32bit words, FIFO space requirement is
now observed.
2020-09-28 08:41:17 +02:00
62a76c0e04
nrf52: Fix edpt_dma_start() wrong condition check
...
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.
This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
4e789b240d
Start of sampling works.
2020-09-06 11:37:59 +02:00
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
19f08a02f6
Merge pull request #486 from kasjer/kasjer/add-endpoint-close-to-synopsys
...
Add dcd_edpt_close() to synopsys
2020-08-24 13:10:46 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
37be0ca732
Fix formatting, get rid of all tabs.
2020-08-20 20:09:44 +02:00
c14f68e2c1
Commit before sharing.
...
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
6309364722
Merge remote-tracking branch 'upstream/master' into uac2
...
Conflicts:
src/device/usbd.c
src/device/usbd.h
src/portable/st/synopsys/dcd_synopsys.c
2020-08-16 14:08:24 +02:00
444e4d2821
Add EP close. Fix bug in set_interface within audio.
2020-08-16 13:48:25 +02:00
e8d50a3c57
Add dcd_edpt_close() to synopsys
...
Endpoint close was implemented only in one driver so far.
This function is needed for interfaces with several alternate settings.
The way FIFO is allocated in dcd_edpt_open() allows to correctly close
only one IN endpoint (the one that was opened last).
2020-08-14 14:29:35 +02:00
88c5e2a37f
Fix synopsys fifo flush during stall
...
Wrong FIFO was flushed in dcd_edpt_stall().
(epnum - 1) should only be used when accessing DIEPTXF registers.
For DIEPCTL and GRSTCTL epnum is correct index.
2020-08-12 10:26:36 +02:00
6f3378f71d
Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit
...
Fix synopsys odd/even frame bit for IN ISO endpoints
2020-08-05 22:36:05 +07:00
e9aa36a6e8
Fix synopsys odd/even frame bit for IN ISO endpoints
...
For ISO endpoint driver has to specify when data
is to be transmitted (odd or even frame).
Currently code was not updating this bit resulting in
data being sent every other frame.
If interval was 1ms full data packed was sent every 2ms, and
ZLP was sent in between.
2020-08-04 09:32:41 +02:00
7d9efd0697
manually submit unplugged event for nrf dcd_disconnect()
2020-08-04 14:18:12 +07:00
026a1e7ac8
Merge pull request #478 from hathach/move-dcdconnect-to-dcdinit
...
Move pull-up enabling to dcd_init() instead of usbd
2020-08-04 14:11:32 +07:00
c557bf7b2e
Implement dynamic FIFO RAM allocation according to configuration desc.
2020-08-03 19:48:05 +02:00
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning
...
fix msp430 gcc 9.2.0 warning
2020-08-02 12:53:03 +07:00
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event
...
correct isr context for nrf DCD_EVENT_UNPLUGGED
2020-08-01 12:31:48 +07:00
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
...
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
c3b0389f10
Fix synopsys size check for ISO endpoint
...
Constraint was incorrect for ISO endpoint as stated in TODO.
2020-07-31 15:52:21 +02:00
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs]
2020-07-29 17:04:47 +07:00
5af08e2ffc
fix strict prototype
2020-07-29 16:59:07 +07:00
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos
...
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
2020-07-28 15:16:15 +07:00
a1a390a788
Update dcd_esp32s2.c
2020-07-28 10:54:23 +03:00
6976e64217
fix msp430 gcc 9.2.0 warning in #465
2020-07-28 14:36:15 +07:00
01903a4a6d
Implement dynamic reallocation of RX and TX fifos for EP0.
...
Tested with EP0 size 8/16/32/64.
2020-07-27 21:03:20 +02:00
5e3f90cd6e
add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset
2020-07-26 19:21:30 +02:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
7baeea7a00
update actual link speed for spresense
2020-07-17 18:28:19 +07:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
6178f8de2f
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
...
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
2020-07-01 13:38:59 +03:00
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
2dd1be13e5
Enhance EP FIFO allocation for both Fullspeed and Highspeed
...
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
- Interrupt -> use EPSize
- Bulk/ISO -> use max(EPSize, remaining-fifo / non-opened-EPIN)
2020-06-15 23:17:49 +07:00
4399dd1b06
cherry pick PR399 commit : Interrupt time improvements
2020-06-14 19:13:31 +07:00
Ha Thach