13a3081d30
Merge pull request #333 from hathach/fix-esp32s2-setup-packet
...
fix incorrect setup packet
2020-04-11 15:18:41 +07:00
07809d03a7
Merge pull request #332 from pigrew/stm32fsdev-dcdconnect
...
stm32fsdev: Implement dcd_connect.
2020-04-11 13:20:31 +07:00
ae1314f1c7
fix incorrect setup packet
...
also increase usbd stack in example when debug is enabled
2020-04-11 12:55:45 +07:00
2ff3f765db
Merge pull request #319 from hathach/add-esp32s2
...
port ESP32 S2
2020-04-10 23:53:03 +07:00
a37a56acd3
remove CONFIG_IDF_TARGET_ESP32S2BETA per review
2020-04-10 23:38:36 +07:00
5bd9d14fc1
stm32fsdev: set dcd_connect API definitions to strong, Modify documentation.
2020-04-10 10:26:41 -04:00
8953bc9255
added comment note for beta chip walkaround
2020-04-10 20:25:53 +07:00
c545cfc0bc
Correct dedicated FIFO SRAM size to 1024
...
add note for up to 5 active IN endpoints (including EP0 IN)
2020-04-10 15:42:50 +07:00
978eec73b3
remove 100us delay at the end of dcd_init()
2020-04-10 15:39:59 +07:00
30945ab9f3
revert name to dcd_int_handler due to function prototype warning
2020-04-10 15:27:23 +07:00
c0695b4b55
clear USB_RXFLVI_M before read_rx_fifo()
...
more format clean up
2020-04-10 15:13:12 +07:00
933e3cdfc7
change indent from 4 -> 2 spaces
2020-04-10 15:01:12 +07:00
cec747776d
rename dcd_init_handler to dcd_irq_handler to consistent with other ports
2020-04-10 14:47:02 +07:00
d122d7de88
remove commented code
2020-04-10 14:45:55 +07:00
a40d1e800d
try to fix racing condition with setup
2020-04-10 14:04:18 +07:00
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
d6578823bb
rename static function for dcd_cxd56 to prevent conflict
2020-04-09 12:00:45 +07:00
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
defea45d44
Merge branch 'master' into refactor-irqhandler
2020-04-09 11:22:20 +07:00
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
880595433c
use macro for easy enable/disable SOF
2020-04-08 15:41:16 +07:00
7b7a78ab2e
disable SOF interrupt since it is not used for now
2020-04-08 15:33:07 +07:00
ccb65fcf6a
nuvoton: add dcd_disconnect() dcd_connect()
2020-04-07 10:51:55 -05:00
06e87b47a2
revert name to dcd_init_handler()
...
since the function signature is different
2020-04-06 21:28:02 +07:00
22a9b05834
rename dcd_int_handler to dcd_irq_handler for consistency with other port
2020-04-06 19:49:25 +07:00
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
050de0ec33
fix issue and typo with In token when Fifo empty
...
fix transmit packet endpoint's fifo
2020-04-06 16:32:55 +07:00
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
1e7c3cf95e
update dcd esp32s2 fifo allocation to match current dcd synopsys
2020-04-03 17:09:38 +07:00
a3e50242b9
add dcd_esp32s2
...
skip esp32s2_saola for make build since idf use cmake
2020-04-01 17:07:28 +07:00
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
6b5157fd28
dcd_msp430x5xx: Add dummy dcd_edpt0_status_complete handler. Add
...
comment which describes why it might be needed.
2020-03-24 00:03:12 -04:00
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
a93548cfe9
update comment per review
2020-03-17 23:39:53 +07:00
a39d170672
follow up to pr #301
...
rename OPT_MCU_NUC505_USB_DMA to simply USE_DMA
2020-03-17 10:40:45 +07:00
df05440d92
NUC505 : added comment on DMA choice
2020-03-16 13:20:17 -05:00
fb56c02a6f
NUC505 : fix operation with net_lwip_webserver
2020-03-15 17:44:09 -05:00
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
c8247f0907
fix zlp for nrf52840
2020-03-08 14:20:28 +07:00
5f5ee465a6
Merge pull request #291 from hathach/port-samg55
...
Port samg55
2020-03-07 16:38:59 +07:00
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
087e3c7f56
Merge branch 'master' into port-samg55
2020-02-07 16:50:07 +07:00
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
e2f60a5134
rt10xx: correct max endpoint count is 8
2020-01-17 17:09:23 +07:00
04d8671641
clean up, disable SOF for dcd trans since we don't use it for now
2020-01-17 12:59:00 +07:00
3208fe00b6
clean up
2020-01-17 12:06:59 +07:00
1f95f439e1
Merge pull request #274 from tannewt/dcache
...
Clean and invalidate the DCache when we have one.
2020-01-17 09:47:38 +07:00
cd6454a330
Add if guards for dcache flushes.
2020-01-16 17:17:49 -08:00
ae68668df9
flush and invalidate the dcache
2020-01-15 21:59:15 -08:00
12b191510a
Merge branch 'master' into nucbusreset
2020-01-16 11:22:33 +07:00
537ceb0f65
Merge branch 'master' into line_endings
2020-01-16 10:55:14 +07:00
2ed395bde3
nuc121: survive USB bus reset
2020-01-15 21:40:24 -06:00
c04bc07c29
nuc121: enhanced driver and hopefully added readability
2020-01-15 20:09:50 -06:00
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
7f2db321bf
nuc121: better fix for handling large OUT transfers
2020-01-15 10:23:23 -06:00
f2a5335417
nuc121: fix handling of OUT transfers larger than max packet size
2020-01-14 22:07:38 -06:00
a6b916ba85
Merge pull request #269 from antmicro/volatile_buffers_fix
...
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
2020-01-15 07:02:11 +10:00
c1781e5e7c
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
...
This makes `rx_buffer` and `tx_buffer` *pointers*
volatile in order to avoid caching them in a register.
The original notation meant "a pointer to a volatile value"
(equivalent of `volatile uint8_t *`). This resulted in
`while(rx_buffer[ep_num] != NULL) ;` loop to get stuck
forever, even though the IRQ handler set the `rx_buffer[ep_num] = NULL`.
2020-01-14 13:57:17 +01:00
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
5c5f876461
dcd_nuc121: allow user ZLP transfers to get a callback
2020-01-04 13:36:26 -06:00
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
421221baa5
making more progress, but failed with WRITE10
...
incorrect queue 448 bytes instead of 512
2019-12-21 23:51:57 +07:00
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
7a05b177a4
Merge pull request #236 from jeremyherbert/master
...
Update dcd_stm32_fsdev.c with note about F042Fx remapping
2019-12-12 10:17:40 +07:00
9d96b6d66e
Update dcd_stm32_fsdev.c
...
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
988edce745
fix build
2019-12-09 18:49:38 +07:00
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
26dcc19b18
valentyusb: eptri: don't double-advance read buffer
...
Due to an error, we were double-advancing the FIFO buffer. The end
result was that the second half of most reads were getting ignored.
This wasn't found during earlier testing because only 64-byte buffers
were tested.
This corrects this error by avoiding double-advancing the buffer.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-29 18:14:23 +08:00
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
Ha Thach