William D. Jones
8f8ca77a91
stm32h7: Mark USB FIFOs as volatile, otherwise optimizations will remove
...
reads/writes to the FIFOs.
2019-09-04 01:06:07 -04:00
William D. Jones
910fd867c7
stm32h7: Fix indentation error where OUT XFER interrupt wasn't handled
...
in the correct scope.
2019-09-03 01:37:44 -04:00
William D. Jones
1a3dc9cba1
stm32h7: USB_OTG_FS -> USB2_OTG_FS.
2019-09-03 01:28:41 -04:00
William D. Jones
f703a74daa
stm32h7: Implement STALL logic for endpoints.
2019-09-03 01:28:41 -04:00
William D. Jones
28b131ea94
stm32h7: Implement dcd_edpt_open. cdc_msc_hid demo functional.
2019-09-03 00:37:50 -04:00
William D. Jones
d4302dacc5
stm32h7: Fix accidental overwrite of STUPCNT field in DOEPTSIZ register.
2019-09-03 00:25:21 -04:00
William D. Jones
9210167603
stm32h7: Implement dcd_set_address.
2019-09-02 21:00:30 -04:00
William D. Jones
0d0b802ee0
stm32h7: Implement IN and OUT receive for EP0; device descriptor returned.
2019-09-02 19:32:11 -04:00
William D. Jones
f602534536
stm32h7: Implement setup packet events.
2019-09-02 13:34:33 -04:00
hathach
074681da8b
dma of lpc54114 can also execute up to 64 bytes each transfer
...
There is still issue with cdc_msc_hid example
2019-09-01 17:05:34 +07:00
hathach
aeea6754af
rename lpc_usbd to lpc_ip3511
2019-09-01 16:44:40 +07:00
hathach
3067809957
adding lpc54xxx to dcd, able to go through enumeration
2019-09-01 16:15:23 +07:00
hathach
957201fc58
fix undef __ARM_ARCH_6M__
2019-09-01 11:59:50 +07:00
hathach
2d041aaa1d
clean up
2019-09-01 08:11:22 +07:00
hathach
30f707cad2
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
2019-09-01 00:51:58 +07:00
hathach
bac75a81fd
support LPC51u68 #100
2019-08-31 22:44:08 +07:00
William D. Jones
8b165e1024
stm32h7: Ensure FS (and the only) PHY is selected for OTG_HS2.
2019-08-30 22:07:35 -04:00
William D. Jones
7153561984
stm32h7: Enable USB peripheral (device does not enumerate yet).
2019-08-30 21:57:06 -04:00
William D. Jones
0fb9ab9a09
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
2019-08-24 12:40:18 -04:00
hathach
47cd08d526
clean up
2019-08-05 22:31:41 +07:00
hathach
d1df041519
nrf5x remove the depenedent on nrfx_power.h
2019-08-05 22:09:37 +07:00
hathach
d211035a0a
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
2019-08-05 21:54:20 +07:00
hathach
ed6fa460e9
stm32 minor change
2019-07-19 10:59:35 +07:00
hathach
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
hathach
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
hathach
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
hathach
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
hathach
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
hathach
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
hathach
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
hathach
2050778763
clean up
2019-05-01 20:41:26 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
hathach
06e1fac7c5
nrf5x enable suspend after set address, instead of set config
2019-04-02 01:20:34 +07:00
hathach
2cc4ab2aef
nrf5x added LOWPOWER when suspend/resume
2019-03-31 23:57:38 +07:00
hathach
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
hathach
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
hathach
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
hathach
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
hathach
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
hathach
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
hathach
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
hathach
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
hathach
da55610f43
clean up
2019-03-20 20:19:21 +07:00
hathach
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
hathach
f932cf3854
stm32 update fifo in comment
2019-03-17 15:16:52 +07:00
hathach
5e92d67015
stm32 update TX Fifo for edpt IN, both CDC + MSC work great
...
- call dcd_event_xfer_complete() when enough bytes received
- add dcd_get_frame_number()
2019-03-15 18:43:09 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
hathach
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
William D. Jones
c95ad426c6
stm32f4: Refactor IN and OUT endpoint interrupt handling into their own functions.
2019-02-27 11:01:08 -05:00
William D. Jones
f43161353c
stm32f4: Refactor RX FIFO read into its own function; remove RXFLVL
...
resetting (read only) and masking (no nested ints).
2019-02-27 10:39:37 -05:00
William D. Jones
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
William D. Jones
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
William D. Jones
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
William D. Jones
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b
) cleanups.
2019-02-08 12:05:44 -05:00
William D. Jones
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
William D. Jones
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
William D. Jones
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
William D. Jones
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
William D. Jones
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
William D. Jones
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
William D. Jones
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
William D. Jones
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
William D. Jones
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
William D. Jones
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
William D. Jones
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
William D. Jones
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
William D. Jones
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
hathach
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
hathach
777f41a066
clean up
2019-01-29 18:47:29 +07:00
William D. Jones
9e76635465
stm32f4: Clarify required FIFO sizes and observed behavior.
2019-01-24 04:18:53 -05:00
William D. Jones
fe7f304ad4
stm32f4: Start adding OUT interrupt handling, fix buffer sizes; RXFIFO
...
too low for some reason, TXFIFO EP0 used wrong bitmask.
2019-01-24 03:06:57 -05:00
hathach
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
William D. Jones
01117fb965
stm32f4: Finish dcd_edpt_xfer implementation (OUT xfers not functional yet).
2019-01-23 03:31:44 -05:00
William D. Jones
b41f610514
stm32f4: Remember to turn off TXFE when IN xfer is done; it not
...
automatically cleared like EPENA.
2019-01-23 02:24:29 -05:00
William D. Jones
836d13fc4b
stm32f4: Fix FIFO write logic (requires 32 bit writes).
2019-01-23 02:06:07 -05:00
William D. Jones
aa9a7e882c
stm32f4: Properly set control endpoint max packet size.
2019-01-23 00:55:45 -05:00
William D. Jones
17e418bce4
stm32f4: Fix incorrect xfer length for short packet IN xfers.
2019-01-23 00:44:55 -05:00
William D. Jones
d1150432fe
stm32f4: Remove assumption that EP 0 is only control endpoint.
2019-01-23 00:12:33 -05:00
William D. Jones
51c0ce3f6b
stm32f4: Implement interrupt handling for IN packets (first signs of life).
2019-01-22 23:51:58 -05:00
William D. Jones
43c890615a
stm32f4: Start implementing dcd_edpt_xfer.
2019-01-22 00:42:43 -05:00
William D. Jones
69f5f18fd6
stm32f4: Remove some template commented code.
2019-01-21 23:45:40 -05:00
William D. Jones
71e1b9d045
stm32f4: Setup packet events in tinyusb now functional.
2019-01-19 21:12:20 -05:00
William D. Jones
5720aef7bb
stm32f4: Implement setup packing receive, fix typo in FIFO receive size.
2019-01-19 20:03:18 -05:00
William D. Jones
06c15bf913
stm32f4: Complete initialization for EP0 (packet handling not implemented).
2019-01-19 17:56:53 -05:00
William D. Jones
657d3e2983
stm32f4: Enable USB peripheral, fix typos in register writes.
2019-01-13 18:36:18 -05:00
William D. Jones
03cbd406cb
dcd_stm32f4: Add USB init skeleton based on manual (does not enumerate).
2019-01-11 19:53:24 -05:00
William D. Jones
0f9fa5956f
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise).
2019-01-11 13:47:44 -05:00
William D. Jones
75fda7d638
cdc_msc_hid: Ensure example compiles again- add missing prototypes,
...
fix incorrect prototypes, clean up.
2019-01-10 10:24:45 -05:00
William D. Jones
b367baeaf1
Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
2019-01-10 09:58:06 -05:00
hathach
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
hathach
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
hathach
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
hathach
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
hathach
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
hathach
e3514b8054
rename hcd_device_remove to hcd_device_close
2018-12-12 11:34:09 +07:00
hathach
607658d047
rename MODE_HOST_SUPPORTED to TUSB_OPT_HOST_ENABLED
2018-12-07 23:38:52 +07:00
hathach
e019916263
clean up ehci, support only 1 controller
2018-12-07 23:35:42 +07:00
hathach
2aa21a14e6
lpc17 ohci failed to execute control transfer !!
2018-12-07 18:49:26 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
2fa32bd949
able to build host lpc18xx
2018-12-05 20:39:52 +07:00
hathach
9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
hathach
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
hathach
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
hathach
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
hathach
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
hathach
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
hathach
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
hathach
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
hathach
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
hathach
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
hathach
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
hathach
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
hathach
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
hathach
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
hathach
658c2ff570
rename
2018-11-30 12:56:09 +07:00
hathach
723e02780d
clean up
2018-11-30 12:51:54 +07:00
hathach
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
hathach
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
hathach
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
hathach
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
hathach
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
hathach
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
hathach
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
hathach
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
hathach
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
hathach
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
hathach
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
Scott Shawcroft
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
hathach
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00